R5F10PLELFB#X5 - 16-Bit 64KB MCU | Renesas Electronics
MPN: R5F10PLELFB#X5 ✓ AktifR5F10PLELFB#X5 Genel Bakış
An RL78 microcontroller is a 16-bit embedded-control IC designed around the Renesas RL78 CPU core, combining flash program memory, RAM, timers, communication peripherals, analog interfaces, and low-power control functions. Within the product hierarchy, it is an MCU, an embedded processing semiconductor, and a member of the automotive-oriented RL78/F14 family. The F14 series combines low standby consumption with functional-safety-oriented peripherals and communication capabilities for vehicle electronic control units.
The R5F10PLELFB#X5 provides 64 KB of flash for program storage and operates at up to 32 MHz for responsive control-loop execution. Its integrated CAN and LIN interfaces reduce external communication-controller requirements in distributed vehicle networks. Comparator functions and timer RD resources support motor-control and safety-oriented signal-processing functions, while the 64-pin LFQFP package provides sufficient I/O and peripheral connectivity for compact electronic control units.
The 3.3 V and 5 V operating capability makes the device suitable for automotive systems that require compatibility with conventional low-voltage digital rails. Its low-power design is particularly valuable in body electronics, gateway modules, sensor controllers, and compact motor-control units where standby current, deterministic timing, and communication coverage influence system architecture.
Typical applications include automotive body-control modules, CAN-based sensor nodes, LIN subnetwork controllers, brushless DC motor controllers, climate-control electronics, and compact infotainment interfaces. For each application, firmware, peripheral allocation, pin multiplexing, and functional-safety requirements must be validated against the complete manufacturer datasheet before production release.
PCB implementation requires careful attention to the 64-pin LFQFP land pattern, supply routing, ground-plane continuity, and decoupling close to the power pins. High-speed or sensitive communication routes should avoid noisy switching nodes, while oscillator and reset circuits require short, stable layouts. Automotive designs must also confirm operating-temperature limits, qualification requirements, and applicable traceability documentation for the exact ordering code.
This product page combines the verified device identity and family capabilities with engineering-focused comparison guidance, application notes, package information, and verified sourcing links. It is intended to help engineers evaluate the R5F10PLELFB#X5 and identify compatible RL78/F14 alternatives without overlooking firmware, memory, temperature, or package-ordering constraints.
Drop-in alternatifler için R5F10PLELFB#X5 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
R5F10PLELFB
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
R5F10PLELFB#V5
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →R5F10PLELFB#H5
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
R5F10PLHLFB#X5
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
R5F10PPELFB#X5
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
R5F10PLELFB#X5 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 16-bit automotive microcontroller (MCU) |
| Series | RL78/F14 |
| CPU Core | Renesas RL78 16-bit core |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB |
| Operating Voltage | 3.3 V to 5 V |
| CAN Interface | Integrated CAN module |
| LIN Interface | Integrated LIN module |
| Motor Control Support | BLDC motor control support |
| Analog Function | Comparator |
| Timer Resource | Timer RD |
| Functional Safety Feature | RL78/F14 functional-safety functions |
| Paket | 64-pin LFQFP (10 mm x 10 mm) |
| Package Code | PG-FP5 |
| Montaj Türü | Surface mount |
| Shipping Form | Tape and reel |
R5F10PLELFB#X5 pg-fp5 Pin Yapısı Kılavuzu
R5F10PLELFB#X5 (pg-fp5 paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: R5F10PLELFB#X5.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
R5F10PLELFB#X5 için uygundur 6 uygulamas: Automotive Body Control Module, CAN-Based Sensor Node, LIN Subnetwork Controller, BLDC Motor Controller, Automotive Climate Control, Vehicle Gateway and Communication Hub.
Automotive Body Control Module
The R5F10PLELFB#X5 fits centralized body-control electronics that coordinate switches, lamps, door modules, and diagnostic inputs. Its 32 MHz RL78 CPU provides deterministic control-loop performance, while 3.3 V and 5 V operation supports conventional automotive digital rails. Integrated CAN connectivity allows the module to exchange data with vehicle networks without a separate controller. The 64-pin LFQFP provides a practical balance of I/O and board area. Engineers should allocate memory for diagnostics, debounce logic, and fault management, and confirm the exact operating-temperature and qualification requirements before release.
Önerilen
CAN-Based Sensor Node
The R5F10PLELFB#X5 can serve as the local controller for a distributed automotive sensor node that converts analog inputs into CAN messages. Its 32 MHz processing rate supports filtering, diagnostics, and communication-task scheduling, while the integrated comparator assists threshold-based sensing. The 64 KB flash budget is suitable for compact protocol handlers and calibration logic when firmware is kept lean. A CAN transceiver completes the physical network interface. Layout should keep the MCU supply stable, provide local decoupling, and route communication and sensor traces away from switching power nodes to reduce susceptibility to automotive electrical transients.
Önerilen
LIN Subnetwork Controller
The integrated LIN module makes the R5F10PLELFB#X5 appropriate for an automotive LIN gateway, switch interface, or seat and climate-control subnode. The 16-bit RL78 architecture handles protocol timing alongside foreground control, and the 3.3 V/5 V operating class aligns with conventional vehicle electronics. A LIN transceiver is required to connect the MCU to the physical bus. Firmware should include frame validation, timeout handling, and wake-up behavior appropriate to the node’s power state. PCB routing should preserve the transceiver’s recommended grounding and keep sensitive LIN and sensor paths isolated from high-current loads.
Önerilen
BLDC Motor Controller
The R5F10PLELFB#X5 supports compact brushless DC motor-control designs using its 32 MHz RL78 core, comparator resources, timer RD functions, and integrated communication interfaces. These resources can support commutation timing, speed-related control, and diagnostic communication within a space-constrained automotive module. The 64 KB flash capacity is appropriate when control code and parameters remain compact. Engineers must confirm the exact timer channels, comparator routing, PWM outputs, and analog limits against the manufacturer datasheet. Thermal layout should separate the motor driver from the MCU and use stable ground references for current-feedback measurement.
Önerilen
Automotive Climate Control
The R5F10PLELFB#X5 can manage climate-control subsystems that combine temperature sensing, fan commands, actuator monitoring, and vehicle-network diagnostics. Its comparator can support threshold detection, while CAN or LIN connectivity allows climate data to be shared with the body controller. The 32 MHz core provides enough scheduling capacity for control tasks and communication handling, and the 64-pin package accommodates the required external interfaces. Design engineers should use the pin-description table to assign analog inputs correctly, isolate sensor routing from actuator switching, and validate behavior across the complete vehicle supply and temperature conditions.
Önerilen
Vehicle Gateway and Communication Hub
The R5F10PLELFB#X5 is suitable for a small automotive communication hub that bridges local control functions through CAN and LIN interfaces. Its 64 KB flash stores protocol conversion, diagnostic handling, and routing logic, while the 32 MHz CPU supports concurrent communication tasks. The device’s low-consumption positioning is valuable in modules that spend substantial time in standby. Firmware should define bus-off recovery, message-rate monitoring, and deterministic wake-up behavior. The PCB should use a continuous ground plane, local bypass capacitors, and controlled routing between the MCU, transceiver, and connector areas to withstand automotive transients.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: R5F10PLELFB#X5 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | R5F10PLELFB | R5F10PLELFB#V5 | R5F10PLELFB#H5 | R5F10PLHLFB#X5 | R5F10PPELFB#X5 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 64-pin LFQFP (10 mm x 10 mm) | 64-pin LFQFP - same package class | 64-pin LFQFP - same package class | 64-pin LFQFP - same package class | 64-pin LFQFP (10 mm x 10 mm) - same package | 64-pin LFQFP - same package class |
| Product Family | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 |
| CPU Architecture | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 |
| Maximum CPU Frequency | 32 MHz | 32 MHz class | 32 MHz class | 32 MHz class | 32 MHz | 32 MHz class |
Ana Farklılayıcılar
- Lower flash configuration for compact control firmware (karşılaştırma:R5F10PLHLFB#X5)
- Integrated vehicle-network connectivity (karşılaştırma:STM8S207RBT6TR)
- Automotive-oriented low-power MCU family (karşılaştırma:ATMEGA64A-ANR)
Tasarım Notları
Use the PG-FP5 64-pin LFQFP land pattern and preserve the manufacturer-recommended pad and solder-mask geometry. Place all decoupling capacitors adjacent to their corresponding supply pins, with the shortest possible ground return. Separate quiet analog and communication routing from motor-driver or actuator switching paths. Confirm every pin multiplex and alternate function against the ordering-code-specific pin table before releasing the PCB.
Design the 3.3 V and 5 V supply rails to remain within the electrical limits specified for the exact R5F10PLELFB#X5 ordering code. Because the MCU coordinates CAN, LIN, and comparator-based sensing, supply disturbance can appear directly as communications errors or false threshold events. Use local bulk capacitance in addition to high-frequency bypass, maintain a continuous ground plane, and test startup, standby, and wake transitions with the final regulator and load configuration.
Route oscillator, reset, and communication interfaces away from switching nodes and high-current motor or actuator paths. Give comparator inputs short, guarded traces and establish a clean analog reference tied to the device ground strategy. CAN and LIN interfaces must follow the selected transceiver’s layout guidance, particularly return-path continuity and connector surge-current routing. Perform signal-integrity and transient-immunity checks on the final multilayer board rather than relying only on schematic connectivity.
Do not treat the R5F10PLE, R5F10PLH, and R5F10PPE family designations as interchangeable without checking flash, RAM, peripheral allocation, and qualification. The R5F10PLHLFB#X5 comparison point provides 192 KB rather than 64 KB of flash, while the #H5, #V5, and #X5 ordering suffixes can encode commercially or environmentally meaningful variant information. Validate the exact ordering code and regenerate the production BOM after any substitution review.
Uyumluluk Bilgisi
The device is identified as an automotive RL78/F14 microcontroller, but the manufacturer listing does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact ordering code.