SN74LS628N - 20 MHz Voltage-Controlled Oscillator | Texas Instruments
MPN: SN74LS628N ✓ AktifSN74LS628N Genel Bakış
A voltage-controlled oscillator is a timing generator whose output frequency varies with an applied control voltage. Within the broader clock-and-timing hierarchy, a VCO belongs to oscillator and frequency-control ICs, where it can supply a variable-frequency clock to counters, dividers, phase-locked loops, clock-data-recovery circuits, modulation stages, and frequency-synthesis systems. The SN74LS628N belongs to the SN74LS logic family, combining bipolar TTL-style interfacing with a dedicated analog timing function.
The principal documented features of the SN74LS628N include its 1.1 MHz to 25 MHz frequency span and its use with an external timing resistor. The manufacturer states that temperature compensation improves when the external resistor's temperature coefficient is appropriate for the design. Manufacturer guidance also provides capacitor-selection information for obtaining a desired operating frequency. A listed output load capacitance of 45 pF is associated with this device in comparison data.
The SN74LS628N is intended for designs that require a frequency controlled by an external voltage rather than a fixed crystal or ceramic resonator. Designers must provide the external timing resistor and determine the timing capacitor according to the manufacturer's application guidance. Because the control voltage determines the operating frequency, circuit design should account for the control-voltage range, sensitivity, and temperature behavior of the complete external timing network.
Typical uses include variable-rate clock generation, sweep and modulation systems, tone-generation circuits, frequency-to-voltage and voltage-to-frequency control loops, phase-locked-loop reference oscillators, and test equipment that requires electronically adjustable timing. The 14-PDIP package favors legacy instrument, industrial-control, educational, and prototype applications where a through-hole footprint is more convenient than a surface-mount land pattern.
When laying out the circuit, route the timing-resistor, capacitor, control-voltage, and output connections to minimize coupling from adjacent switching circuits. Select the external components from the manufacturer datasheet's application guidance rather than relying on generic equations, because the achievable frequency also depends on the control voltage and component tolerances. Confirm the final frequency and temperature stability during prototype testing.
This page combines the SN74LS628N's documented operating range and package information with a component-level comparison, sourcing guidance, and practical design notes. It also identifies the few closely related manufacturer variants that can be evaluated when a procurement or assembly requirement changes.
Drop-in alternatifler için SN74LS628N — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
SN74LS628NG4
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
SN74LS628NE4
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
SN74LS628N Özellikler
| Product Type | Voltage-Controlled Oscillator (VCO) |
| Manufacturer | Texas Instruments |
| Logic Family | SN74LS |
| Listed Maximum Frequency | 20 MHz |
| Series Frequency Range | 1.1 MHz to 25 MHz |
| Output Load Capacitance | 45 pF |
| Package Type | 14-PDIP |
| Pin Sayısı | 14 pins |
| Montaj Stili | Through-hole |
| Timing Resistor | External resistor across REXT pins |
| Timing Capacitor | External capacitor; value selected using manufacturer guidance |
| Frequency Control Method | External control voltage |
| Temperature Compensation | Improved by selecting an external resistor with an appropriate temperature coefficient |
SN74LS628N 14-pdip Pin Yapısı Kılavuzu
SN74LS628N (14-pdip paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: SN74LS628N.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
SN74LS628N için uygundur 6 uygulamas: Variable-Frequency Clock Generation, Frequency Sweep and Tone Generation, Phase-Locked-Loop Reference Oscillator, Industrial Timing and Control Modules, Voltage-to-Frequency Control Loops, Legacy Test and Measurement Equipment.
Variable-Frequency Clock Generation
The SN74LS628N is suited to systems that need an electronically adjustable clock rather than a fixed crystal frequency. Its documented series range extends from 1.1 MHz to 25 MHz, allowing the control voltage and external timing network to set the operating point. Place the REXT resistor and timing capacitor close to their associated device pins, and route the control input away from switching nodes to reduce frequency jitter. Because the frequency depends on both the control voltage and external component tolerances, verify the complete tuning range on prototypes.
Önerilen
Frequency Sweep and Tone Generation
A voltage-controlled oscillator can support swept-frequency test signals, tone generators, and modulation systems. The SN74LS628N provides a documented 1.1 MHz to 25 MHz family range, which is useful when a controller must command the operating frequency through an analog voltage. Use a low-noise control source and keep the external timing components compact to minimize parasitic coupling. Check the control-voltage sensitivity and temperature behavior in the manufacturer datasheet before defining the sweep limits for an instrument.
Önerilen
Phase-Locked-Loop Reference Oscillator
The SN74LS628N can serve as the controlled reference source in frequency-generation and phase-locked systems where the frequency must be trimmed electronically. Its external timing resistor allows the designer to establish the operating resistance, while the control input provides a means of correcting or modulating the output frequency. Keep the oscillator loop layout compact and isolate the control path from the feedback network to avoid unwanted modulation. Validate loop stability and capture behavior in the complete phase-locked-loop design.
Önerilen
Industrial Timing and Control Modules
The 14-PDIP SN74LS628N is well suited to legacy industrial-control modules, test fixtures, and educational platforms that use through-hole logic packages. An adjustable oscillator can replace multiple fixed-frequency choices where a controller changes the operating rate during calibration or production testing. Provide stable logic supply decoupling and a controlled timing-voltage source. Because the device relies on external timing components, the resistor and capacitor tolerances establish much of the final frequency accuracy and should be selected according to the manufacturer's guidance.
Önerilen
Voltage-to-Frequency Control Loops
The SN74LS628N is applicable to analog control loops in which a measured voltage must be converted into a variable pulse rate. The control voltage establishes the oscillator frequency, enabling the output to represent a changing process or sensor condition. A documented family range of 1.1 MHz to 25 MHz provides several frequency-control decades for signal processing. Design the interface for monotonic behavior, calibrate the voltage-to-frequency transfer characteristic, and keep high-impedance control traces short to reduce noise pickup and unintended frequency shifts.
Önerilen
Legacy Test and Measurement Equipment
Through-hole instrument and educational designs can use the SN74LS628N where adjustable timing is needed in a compact 14-PDIP footprint. It is appropriate for bench-test signal sources, counter stimulus circuits, and clock-generation modules that were designed around the SN74LS logic family. Use a clean supply rail, decouple the device close to its supply pins, and keep the external timing network away from motor-control and relay-switching traces. Confirm the exact pinout and timing limits in the manufacturer datasheet before retrofitting older equipment.
Önerilen
Mühendislik referans verileri: SN74LS628N — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | SN74LS628NG4 | SN74LS628NE4 |
|---|---|---|---|
| Package | 14-PDIP | 14-PDIP - same package | 14-PDIP - same package |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Function | Voltage-controlled oscillator | Voltage-controlled oscillator | Voltage-controlled oscillator |
| Series Frequency Range | 1.1 MHz to 25 MHz | 1.1 MHz to 25 MHz | 1.1 MHz to 25 MHz |
| Mounting Style | Through-hole | Through-hole | Through-hole |
Ana Farklılayıcılar
- Directly adjustable frequency from an external control voltage (karşılaştırma:SN74LS628NG4)
- Documented external-resistor temperature-compensation path (karşılaştırma:SN74LS628NE4)
- Through-hole 14-PDIP construction for legacy and prototype boards (karşılaştırma:SN74LS628NG4)
Tasarım Notları
Place the external timing resistor and timing capacitor close to the SN74LS628N pins, and connect the timing capacitor's return directly to the device ground reference. Long timing-node traces can pick up surrounding signals and shift the oscillator frequency. Keep the control-voltage trace away from clock outputs and switching-node copper, and use a ground reference that follows the manufacturer's application diagram.
Follow the manufacturer schematic for supply decoupling and logic-family voltage requirements. Place the bypass capacitor immediately across the device's supply and ground pins so switching-current loops remain small. The available component information does not state the exact supply voltage, current, or logic thresholds; use the SN74LS628 datasheet before connecting the oscillator to a 5 V or other system rail.
The VCO control input sets the output frequency, so supply ripple, control-voltage noise, and coupling from the output can modulate the timing signal. Use a clean source for the control voltage, avoid routing the timing nodes beneath high-current traces, and evaluate frequency jitter with the complete external timing network. Temperature-coefficient selection for the timing resistor also affects stability because the manufacturer specifically links resistor behavior to temperature compensation.
Uyumluluk Bilgisi
The product and comparison information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The SN74LS628N is a legacy through-hole logic-family device and is not presented as an automotive-qualified AEC-Q100 part.