STM32F091CCT7 - 48MHz Cortex-M0 MCU | STMicroelectronics
MPN: STM32F091CCT7 ✓ AktifSTM32F091CCT7 Genel Bakış
A microcontroller is a semiconductor integrated circuit that integrates a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters on one device. Within the device hierarchy, the STM32F091CCT7 is an ARM Cortex-M0 microcontroller, an embedded processor, an integrated circuit, and a semiconductor intended for real-time control rather than general-purpose computing.
The manufacturer identifies three headline characteristics for this device: a 48 MHz ARM Cortex-M0 core, 256 KB of Flash organized as 256K x 8, and a 48-pin LQFP package measuring 7 x 7 mm. The C package variant provides a practical balance between processing performance, code capacity, and a manageable pin count for medium-density control designs. The manufacturer product page also identifies the STM32F091xB/xC family as a high-performance Cortex-M0 platform operating at up to 48 MHz.
The integrated Flash provides space for boot code, application firmware, configuration data, and field-upgrade logic within one package. This can simplify board layout by reducing the need for external program-memory devices. The 48 MHz operating rate supports responsive control loops and time-sensitive peripheral operation, although final real-time performance depends on the selected peripheral, interrupt configuration, firmware architecture, and external clock arrangement.
The STM32F091CCT7 is suitable for compact embedded systems requiring a conventional microcontroller footprint and broad embedded-control functionality. Potential design areas include industrial sensing equipment, small motor-control boards, communication modules, consumer controls, and compact instrumentation. A design should be selected only after checking the exact peripheral mix, pin multiplexing, voltage limits, clock tree, and memory requirements in the manufacturer documentation for the STM32F091xB/xC family.
Package selection and PCB design require particular attention because the device uses a 48-LQFP rather than a leadless package. The exposed leads provide a larger assembly tolerance than fine-pitch QFN packages and offer straightforward visual inspection, but they require adequate copper routing, solder-mask definition, and thermal-via planning. Use the manufacturer pin-description table and package drawing to assign every ball, power pin, ground pin, and alternate-function signal before layout release.
This page combines the exact orderable MPN, manufacturer product information, distributor listings, package hierarchy, replacement considerations, and practical selection guidance. It also distinguishes true pin-compatible family variants from broader MCU alternatives so engineers can evaluate replacement risk before committing a board to production.
Drop-in alternatifler için STM32F091CCT7 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller STM32F091CCT7 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Flash Memory.
STM32F091CCT6
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →STM32F091CCU6
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →STM32F091CCU6TR
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32F091CCT7 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 256 KB (256K x 8) |
| Program Memory Type | Flash |
| CPU Architecture | 32-bit RISC |
| Processor Core | ARM Cortex-M0 |
| Paket | 48-LQFP (7 x 7 mm) |
| Pin Sayısı | 48 pins |
| Montaj Türü | Surface mount |
STM32F091CCT7 48-lqfp (7 x 7 mm) Pin Yapısı Kılavuzu
STM32F091CCT7 (48-lqfp (7 x 7 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: STM32F091CCT7.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
STM32F091CCT7 için uygundur 6 uygulamas: Industrial Sensing and Monitoring, Compact Motor and Actuator Control, Communication Module Control, Consumer Control and Interface Boards, Instrumentation and Data Acquisition, Automotive and Robust Embedded Accessories.
Industrial Sensing and Monitoring
The STM32F091CCT7 is suitable for compact sensing and monitoring equipment that must process inputs while maintaining a small 7 x 7 mm LQFP footprint. Its 48 MHz ARM Cortex-M0 core provides responsive task scheduling and peripheral handling, while 256 KB of integrated Flash allows application logic, calibration tables, and a bootloader to reside on the MCU. A typical board would place the device beside sensor interfaces, signal-conditioning components, and a communication interface. The 48-pin package offers more routing options than a very small microcontroller package, while integrated Flash can reduce external-memory complexity. Final suitability depends on confirming the required ADC characteristics, timer resources, operating voltage, and environmental grade in the manufacturer documentation.
Önerilen
Compact Motor and Actuator Control
The STM32F091CCT7 can serve as the control processor in small motor, valve, pump, or actuator modules where deterministic embedded control is required without a higher-performance Cortex-M core. The 48 MHz operating rate supports responsive control-loop execution, and the 256 KB Flash capacity is suitable for motion algorithms, protection logic, diagnostics, and configuration handling. Its 48-LQFP package provides separate pins for power, ground, timers, communication, and control outputs, making it practical for dense mixed-signal layouts. The design must still confirm timer channel availability, pin remapping, motor-driver interface voltage, and the maximum control-loop workload. Thermal requirements should be assessed separately from the MCU's internal protection functions.
Önerilen
Communication Module Control
The STM32F091CCT7 is appropriate for compact protocol bridges, interface modules, and embedded communication controllers that need local configuration, status handling, and firmware-driven control. Its Cortex-M0 core operates at up to 48 MHz, while 256 KB of Flash can hold protocol stacks, boot code, diagnostic routines, and field configuration. The 48-LQFP package offers a useful balance between I/O availability and manufacturability compared with a leadless package. A communication design should verify the exact peripheral inventory and alternate-function assignments for the selected STM32F091xC variant, especially where CAN, serial interfaces, USB, or other functions are required. Clock accuracy, transceiver interfacing, isolation, and electromagnetic compliance remain board-level considerations.
Önerilen
Consumer Control and Interface Boards
The STM32F091CCT7 is suitable for compact consumer-control boards, keypad interfaces, appliance controllers, and human-interface modules where an economical MCU with integrated program memory is valuable. Its 256 KB Flash supports application firmware and product-specific behavior without requiring an external program-memory device, while the 48 MHz Cortex-M0 core handles button logic, display updates, and peripheral servicing. The 48-LQFP package is easy to inspect after reflow and offers adequate spacing for mixed analog and digital routing. Designers should confirm the pin count needed for the human interface, required communication interface, supply voltage, and ambient-temperature exposure. Firmware partitioning should also account for bootloader security, factory test, and any end-of-line configuration requirements.
Önerilen
Instrumentation and Data Acquisition
The STM32F091CCT7 can support compact instrumentation and data-acquisition front ends that need local control, calibration, and data handling. The 48 MHz ARM Cortex-M0 core provides adequate instruction throughput for sampling orchestration, filtering, and interface management, while the 256 KB Flash capacity can accommodate control code, calibration coefficients, and diagnostic functions. The 48-pin LQFP package makes it practical to allocate pins for analog inputs, references, communication, and control signals. Signal-chain accuracy will depend on the MCU's specified ADC characteristics and the external analog design, so those requirements should be checked before committing to the device. Layout should isolate sensitive analog paths from switching nodes and place decoupling and reference components according to the manufacturer recommendations.
Önerilen
Automotive and Robust Embedded Accessories
The STM32F091CCT7 can be evaluated for auxiliary automotive, transportation, or rugged embedded modules where a 48 MHz Cortex-M0 core and 256 KB Flash meet control requirements. Its integrated program memory and 48-LQFP package simplify designs that need substantial firmware but only a modest pin count. Automotive use requires more than package compatibility: the exact AEC-Q100 qualification, temperature grade, transient immunity, brownout behavior, and device-specific errata must be confirmed for the selected order code. If the exact variant is not qualified for the target environment, it should not be described as an automotive drop-in. Thermal design, power-supply tolerance, vibration, and production traceability must be addressed at the system level before deployment.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: STM32F091CCT7 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | STM32F091CCT6 | STM32F091CCU6 | STM32F091CCU6TR |
|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 256 KB (256K x 8) | 256 KB (256K x 8) | 256 KB (256K x 8) | 256 KB (256K x 8) |
| Program Memory Type | Flash | Flash | Flash | Flash |
| Pin Count | 48 pins | 48 pins | 48 pins | 48 pins |
| Ordering Form | Tray-packed order code | Tray-packed order code | Tray-packed order code | Tape-and-reel order code |
Ana Farklılayıcılar
- Integrated code capacity reduces external program-memory complexity (karşılaştırma:STM32F091CCT6)
- Same 48-LQFP footprint supports PCB reuse within the STM32F091CC family (karşılaştırma:STM32F091CCU6)
- Assembly flexibility between tray and reel supply forms (karşılaştırma:STM32F091CCU6TR)
Tasarım Notları
Use the official 48-LQFP land pattern rather than estimating pad geometry from the 7 x 7 mm body size. Confirm pin-1 orientation, pad length, pad width, solder-mask clearance, and courtyard spacing against the manufacturer package drawing. Place decoupling capacitors at the corresponding supply pins with short, low-loop-current paths, and route high-current or switching-node copper away from exposed ADC and communication pins.
Create the PCB footprint from the exact STM32F091CC package drawing and verify it against the assembled part and pick-and-place library. A 48-LQFP footprint can appear electrically simple while still producing soldering defects if paste volume, toe fillet, or pad clearance is incorrect. After fabrication, inspect pin 1, all four sides of the package, and continuity between power, ground, reset, and programming interfaces before full board population.
Do not treat the base family name as proof of interchangeability. The T6, T7, U6, and TR portions of an STM32 order code can affect temperature grade or packing, and peripheral availability can vary by density suffix. Before approving a substitute, compare the exact ordering table, pin-description table, electrical characteristics, errata, firmware-support status, and package drawing. Verify that the programming and debug interface remains accessible on the final board.
Uyumluluk Bilgisi
The exact orderable part's compliance declarations were not identified in the verified product snippets. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer's product documentation or declaration before procurement.