STM32F723ZEI6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics
MPN: STM32F723ZEI6 ✓ AktifSTM32F723ZEI6 Genel Bakış
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic into one device. The STM32F7 family belongs to the hierarchy of 32-bit RISC microcontrollers, embedded processors, and programmable semiconductor controllers. Arm Cortex-M7 designs are widely used for real-time control because they combine deterministic peripheral access with extensive digital and analog interface options.
The STM32F723ZEI6 operates at up to 216 MHz and includes 512 KB of flash storage. Its 144-UFBGA package provides 144 connection positions in a 7 x 7 mm body, allowing a compact solution for board designs that need numerous I/O connections. The product family supports 1.8 V, 2.5 V, and 3.3 V supply operation according to the manufacturer documentation. The industrial-order suffix indicates the -40 °C to 85 °C temperature range, while the E suffix denotes the 512 KB flash configuration.
The STM32F723 architecture is designed for high-speed control and data movement. Its Cortex-M7 core is suitable for algorithms, communication stacks, human-machine interfaces, and real-time signal processing. The device also supports floating-point-oriented software workflows through the Arm Cortex-M7 architecture. Designers should use the STM32CubeMX configuration tool and STM32CubeIDE software environment to initialize clocks, assign pins, configure peripherals, and build the application firmware.
Typical uses include industrial automation controllers, connected sensor gateways, motor-control systems, communications equipment, test and measurement instruments, and compact embedded computers. The 512 KB flash capacity permits a larger application than smaller STM32 devices, while the 144-pin package supports extensive board-level integration. The 7 x 7 mm UFBGA construction requires careful PCB layout and fine-pitch assembly capability.
For a new design, confirm all power rails, decoupling, exposed-pad requirements, clock sources, and debug connections against the manufacturer datasheet. Firmware should be validated for memory-map differences, peripheral availability, and timing constraints before production release. This product page combines package, memory, core-frequency, sourcing, and replacement information to support initial design review and BOM evaluation.
Drop-in alternatifler için STM32F723ZEI6 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller STM32F723ZEI6 (aynı form faktörü ve ayağa oturma) — farklı olan Flash Organization, Package, Product Type.
STM32F723ZEI7
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
STM32F733ZEI7
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
STM32F723ZCI6
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
STM32F723ZEI6 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 32-bit RISC microcontroller |
| Processor Core | Arm Cortex-M7 |
| Maximum CPU Frequency | 216 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| Architecture | 32-bit RISC |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Paket | 144-UFBGA, 7 x 7 mm |
| Pin Sayısı | 144 pins |
| Montaj Türü | Surface mount |
| Temperature Range | -40 °C to +85 °C |
| Order-Code Flash Designator | E: 512 KB flash |
| Order-Code Temperature Designator | I: -40 °C to +85 °C |
| ADC Resolution | 12-bit |
STM32F723ZEI6 144-ufbga, 7 x 7 mm Pin Yapısı Kılavuzu
STM32F723ZEI6 (144-ufbga, 7 x 7 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: STM32F723ZEI6.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
STM32F723ZEI6 için uygundur 6 uygulamas: Industrial Automation Controller, Connected Sensor Gateway, Motor Control System, Communications Equipment, Test and Measurement Instrument, Embedded Graphical User Interface.
Industrial Automation Controller
The STM32F723ZEI6 fits industrial automation controllers that require a 216 MHz Cortex-M7 core and a dense 144-pin interface in a 7 x 7 mm package. It can coordinate sensor acquisition, communications, motion-control logic, and operator-facing functions without relying on a higher-cost application processor. The 512 KB flash configuration provides room for a communication stack, control routines, diagnostics, and configuration data. During hardware design, separate analog and digital routing, maintain short return paths, and validate the 1.8 V, 2.5 V, or 3.3 V supply plan against the selected clocking and peripheral configuration.
Önerilen
Connected Sensor Gateway
The STM32F723ZEI6 is appropriate for connected sensor gateways that combine protocol handling, local processing, and multiple digital interfaces in a compact board. Its Cortex-M7 core can process buffered sensor data and manage Ethernet or serial connectivity, while 512 KB of flash supports gateway firmware and protocol components. The 144-UFBGA package concentrates connections for communications, status indicators, storage, and expansion headers. Keep high-speed interfaces away from sensitive analog inputs, provide local decoupling at each supply pin, and confirm the selected transceiver operates with the gateway’s chosen 3.3 V interface levels.
Önerilen
Motor Control System
The STM32F723ZEI6 can serve as the control processor in a compact motor-control system where fast computation and numerous I/O resources are valuable. The 216 MHz Cortex-M7 core supports current sampling, encoder processing, control-loop execution, and protection sequencing, while the 144-UFBGA package leaves ample connections for pulse-width-modulation outputs, gate drivers, position sensing, and communications. The principal design concern is signal integrity: isolate switching nodes from analog references, use controlled return currents, and validate timing margins with the actual motor-driver and power-stage layouts. The 512 KB flash also accommodates algorithms and field-update logic.
Önerilen
Communications Equipment
The STM32F723ZEI6 is suited to communications equipment that performs protocol termination, framing, buffering, and supervisory control alongside a communications processor. Its 216 MHz Cortex-M7 performance handles interrupt-driven networking and real-time management tasks, while the 144-UFBGA package supports multiple serial channels, clocks, indicators, and configuration interfaces. The 512 KB flash configuration accommodates firmware components without immediately relying on external memory. For production designs, implement controlled-impedance routing for high-speed links, separate clock and data return paths, and validate electromagnetic-emissions and immunity requirements across the complete enclosure and cable environment.
Önerilen
Test and Measurement Instrument
The STM32F723ZEI6 supports compact test and measurement instruments that combine real-time control, data acquisition, display management, and host communications. The Cortex-M7 core can execute acquisition control and signal-processing workflows at up to 216 MHz, and the 144-UFBGA package provides a practical balance between pin access and board area. The 512 KB flash capacity is suitable for embedded control firmware, calibration tables, and communication routines. Keep sensitive analog channels short and isolated from digital switching, use a low-noise reference strategy for precision measurements, and validate timing and timing-margin requirements against the selected converter and interface devices.
Önerilen
Embedded Graphical User Interface
The STM32F723ZEI6 can act as the main processor in an embedded human-machine interface because its Cortex-M7 core provides more performance than a basic control microcontroller and its 144-UFBGA package supports displays, touch inputs, communication links, and expansion functions. The 512 KB flash configuration supports interface code and application logic, while the -40 °C to +85 °C industrial grade supports controlled indoor or industrial environments. Display and touch interfaces should be routed away from switching power stages, connector transients should be handled locally, and firmware should be tested with the final panel timing because controller performance does not eliminate display-bus signal-integrity requirements.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: STM32F723ZEI6 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | STM32F723ZEI7 | STM32F733ZEI7 | STM32F723ZCI6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-UFBGA (7x7) | 144-UFBGA (7x7) | 144-UFBGA (7x7) | 144-UFBGA (7x7) |
| Processor Core | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
| Maximum CPU Frequency | 216 MHz | 216 MHz | 216 MHz | 216 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V |
| Temperature Designator | I: -40 °C to +85 °C | I: -40 °C to +85 °C | I: -40 °C to +85 °C | C: -40 °C to +85 °C |
Ana Farklılayıcılar
- Compact 144-UFBGA implementation of a 216 MHz Cortex-M7 controller (karşılaştırma:STM32F723ZET6)
- Direct related-family replacement path with matching core and memory (karşılaştırma:STM32F723ZEI7)
- Closest documented STM32F723-family functional alternative (karşılaştırma:STM32F723ZCI6)
Tasarım Notları
Use the exact 144-UFBGA land pattern and exposed-pad connection from the manufacturer package drawing. Place the device-side decoupling capacitors close to their associated supply pins, with short ground returns and minimal loop area. The 7 x 7 mm body leaves little routing room, so complete escape routing and layer-transition planning before committing the component placement. Fine-pitch BGA assembly also requires a manufacturing process capable of inspecting the hidden solder joints.
Confirm every supply rail against the selected operating frequency and peripheral configuration. The device supports 1.8 V, 2.5 V, and 3.3 V operation, but the allowable combinations depend on the device configuration and manufacturer limits. Separate sensitive analog supplies from digital switching activity, provide local bulk capacitance, and verify startup sequencing in hardware. Do not connect peripheral interfaces until their logic levels and supply domains have been reconciled with the pin descriptions.
Reserve the complete 144-ball footprint and keep high-speed communication lines away from analog inputs, clock circuitry, and switching-node return paths. Route clocks over continuous ground planes and avoid stubs; maintain the geometry recommended by the selected transceiver and memory interface. The compact BGA package can hide routing congestion, so perform signal-integrity and return-path checks in the PCB tool before release, including the effects of adjacent ball assignments.
Do not substitute a different STM32F723 suffix solely because the base family and flash capacity appear identical. Review the complete ordering information for temperature grade, qualification, package, and production status. Likewise, a 144-LQFP variant such as STM32F723ZET6 is not a physical drop-in replacement for the 7 x 7 mm UFBGA device. Validate boot configuration, debug access, clock tree, peripheral availability, and firmware support before approving a substitution.
Uyumluluk Bilgisi
Compliance attributes require confirmation from the manufacturer product documentation or the relevant declarations.