STM32G031G6U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
MPN: STM32G031G6U6 ✓ AktifSTM32G031G6U6 Genel Bakış
A microcontroller is a complete embedded-processing component containing a CPU core, program memory, data memory, peripherals, clocking, debug facilities, and input/output interfaces. The STM32G0 family belongs to the embedded MCU and 32-bit RISC processor hierarchy. Its Cortex-M0+ core provides a compact software ecosystem, while the STM32G031G6U6 combines 64 MHz processing with 32 KB Flash and 8 KB RAM for control, communication, sensing, and user-interface tasks.
The verified device data identifies an Arm Cortex-M0+ core, 32-bit architecture, 64 MHz maximum frequency, 32 KB Flash, 8 KB SRAM, and a 28-UFQFPN 4 x 4 mm package. Mouser additionally identifies two USART peripherals. STMicroelectronics positions the STM32G031x4/x6/x8 mainstream range for general embedded applications, allowing developers to use a small MCU for compact industrial, consumer, sensor, and communication products.
The UFQFPN package supports dense PCB integration while keeping the footprint within 4 x 4 mm. Because the provided data does not include the complete pin names, electrical limits, timing characteristics, or environmental ratings, those values must be confirmed against the official STMicroelectronics product documentation before schematic capture, PCB release, or production qualification.
Typical design roles include low-cost sensor controllers, compact sensor hubs, small motor-control supervisory circuits, industrial modules, communication equipment, and embedded control panels. The 64 MHz CPU and 32 KB Flash provide useful performance and code space for lightweight protocol handling and control loops, while 8 KB RAM should be checked against the selected application’s stack and buffer requirements.
The principal design check is software and peripheral fit rather than package size alone. Validate the required USART count, pin multiplexing, clock tree, ADC resources, timers, communication peripherals, memory usage, and low-power behavior against the official datasheet. Keep power decoupling close to the device and confirm exposed-pad or thermal-layout requirements from the package drawing before manufacturing.
This product record combines the verified manufacturer and distributor identity, pricing source, core and memory specifications, package information, and application-oriented engineering guidance. It also records unavailable parameters explicitly rather than guessing, helping engineers distinguish verified facts from data that must be completed during design-in.
Drop-in alternatifler için STM32G031G6U6 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller STM32G031G6U6 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Flash Memory, Communication Interfaces, Core, RAM.
STM32G031G6U6TR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
STM32G031G8U6
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →STM32G031G4U6
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
STM32G031G6U6
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →STM32F042G6U6
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
STM32G031G6U6 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 32-bit microcontroller |
| CPU Core | Arm Cortex-M0+ |
| Instruction Architecture | 32-bit RISC |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 32 KB |
| RAM | 8 KB |
| Memory Organization | 32K x 8 Flash organization |
| Series | STM32G0 |
| USART Count | 2 |
| Paket | 28-UFQFPN (4 x 4 mm) |
| Package Type | UFQFPN |
| Package Dimensions | 4 x 4 mm |
| Package Pin Count | 28 pins |
| Montaj Türü | Surface mount |
| Core | Arm Cortex-M0+ |
| Manufacturer Product Status | Active |
STM32G031G6U6 28 pins Pin Yapısı Kılavuzu
STM32G031G6U6 (28 pins paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: STM32G031G6U6.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
STM32G031G6U6 için uygundur 6 uygulamas: Compact Sensor Controller, Small Motor-Control Supervisor, Industrial Communication Module, Battery-Powered Monitoring Device, Embedded Consumer Appliance Controller, Compact Data Acquisition Front End.
Compact Sensor Controller
The STM32G031G6U6 fits compact sensor-controller designs because its Arm Cortex-M0+ core operates up to 64 MHz while the device remains in a 4 x 4 mm 28-UFQFPN package. A firmware task can acquire sensor data, apply digital filtering, maintain control thresholds, and expose status through one of the two verified USART peripherals. The 32 KB Flash and 8 KB RAM are adequate for compact embedded applications, but engineers should reserve memory for the stack, buffers, drivers, and protocol code. Confirm ADC, timer, and pin requirements in the official datasheet before committing the design.
Önerilen
Small Motor-Control Supervisor
STM32G031G6U6 can serve as a supervisory controller in small motor systems where a higher-performance motor driver handles power conversion while the MCU manages commands, interlocks, fault reporting, and timing. The 64 MHz Cortex-M0+ core provides enough instruction throughput for control-state logic, while two USARTs can support a host interface and an external controller. The compact 28-UFQFPN footprint helps reduce board area. Before implementation, verify timer outputs, encoder or sensor inputs, fault pins, voltage levels, and motor-driver timing requirements in the official device documentation.
Önerilen
Industrial Communication Module
The STM32G031G6U6 is appropriate for small communication modules that need local protocol handling, configuration storage, status LEDs, and host connectivity. Its two USARTs provide a basis for dual serial-channel designs, and the 64 MHz core can service lightweight framing and control tasks. The 32 KB Flash and 8 KB RAM should be checked against the selected protocol stack, logging requirements, and update mechanism. Verify the exact USART pin multiplexing, peripheral clocks, supply range, and any required transceiver level conversion before layout.
Önerilen
Battery-Powered Monitoring Device
STM32G031G6U6 can support battery-powered monitoring equipment where low board area and a modest processing footprint are important. The controller can periodically wake from a low-power state, read sensors, process thresholds, and report through one of the verified USART channels. The 28-UFQFPN 4 x 4 mm package helps fit the MCU beside sensing and power circuitry. Actual battery life depends on the selected operating mode, clock configuration, analog front end, and firmware duty cycle; these values are not included in the supplied data and must be verified before design completion.
Önerilen
Embedded Consumer Appliance Controller
STM32G031G6U6 can be used in compact consumer products for local control, user-input handling, status indication, and serial configuration. Its Cortex-M0+ core, 32 KB Flash, and 8 KB RAM are suitable for small control products that do not require a high-end application processor or extensive connectivity. The 4 x 4 mm package reduces PCB area, while two USARTs can assist with configuration or external accessory control. Validate ESD, temperature, EMC, and power-supply requirements for the final product because those application-level specifications are not provided in the verified snippets.
Önerilen
Compact Data Acquisition Front End
STM32G031G6U6 can act as the control MCU for a small data-acquisition front end that samples sensors, timestamps events, filters readings, and forwards results to a host. The 64 MHz core supports responsive interrupt and control-loop handling, while the 32 KB Flash and 8 KB RAM constrain the chosen buffering and logging strategy. The 28-UFQFPN package permits placement close to the analog circuitry, helping reduce board area and routing complexity. Confirm the ADC architecture, sampling time, trigger inputs, reference voltage, and required calibration workflow in the official datasheet.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: STM32G031G6U6 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | STM32G031G6U6TR | STM32G031G8U6 | STM32G031G4U6 | STM32F042G6U6 |
|---|---|---|---|---|---|
| Package | 28-UFQFPN (4 x 4 mm) | 28-UFQFPN (4 x 4 mm) | 28-UFQFPN package family | 28-UFQFPN package family | 28-UFQFPN package family |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Series | STM32G0 | STM32G0 | STM32G0 | STM32G0 | STM32F0 |
Ana Farklılayıcılar
- Compact 4 x 4 mm package with embedded Cortex-M0+ processing (karşılaştırma:STM32F042G6U6)
- Two verified USART peripherals (karşılaştırma:STM32G031G6U6TR)
- STM32G0 platform alignment (karşılaştırma:STM32F042G6U6)
Tasarım Notları
Use the official 28-UFQFPN land pattern and keep the device footprint within the manufacturer’s assembly recommendations. Place decoupling capacitors close to the appropriate power pins and route the exposed pad or thermal-related copper exactly as shown in the package drawing. The supplied data confirms the 4 x 4 mm package but does not provide the complete pinout, so do not finalize PCB routing from a generic UFQFPN footprint.
Validate the supply-voltage range, power sequencing, and reset requirements from the official STM32G031G6 documentation before applying the device in a product. The verified snippets identify the CPU and memory resources but do not provide absolute maximum ratings or minimum operating voltage. Use the manufacturer’s recommended decoupling and power-filtering layout, and verify brownout behavior, clock startup, and peripheral current consumption against the final system load.
Plan the two USART connections and all required debug, boot, and clock signals before fixing the PCB layout. Although the package is compact, alternate-function routing can constrain which peripherals can be used simultaneously. Check the official pin table for USART instances, debug interface, clock pins, and exposed-pad requirements. For communication or sensor boards, keep noisy switching and motor-drive return currents away from the MCU ground and analog reference paths.
Do not assume that a related STM32G031 suffix is a drop-in replacement until memory density, package dimensions, pin mapping, peripheral availability, and firmware startup requirements are verified. The supplied cross-reference data identifies comparison candidates but does not prove full compatibility. Also avoid selecting the part solely from its 64 MHz rating: confirm that 32 KB Flash and 8 KB RAM accommodate the bootloader, libraries, stack, RTOS, and application buffers.
Estimate actual power dissipation from the selected operating voltage, clock frequency, active peripherals, and GPIO load rather than relying on a generic MCU power figure. The provided data does not include current consumption or thermal resistance, so no numerical estimate is included here. Use the manufacturer’s maximum ratings and package thermal data, preserve exposed-pad copper where applicable, and test junction temperature in the final enclosure and ambient conditions.
Uyumluluk Bilgisi
The supplied verified snippets identify the product and package but do not provide compliance declarations. Compliance status must be confirmed from the current STMicroelectronics product documentation or supplier certificates.
