STMicroelectronics

STM32G041Y8Y6TR - 64MHz Cortex-M0+ MCU | STMicroelectronics

MPN: STM32G041Y8Y6TR ✓ Aktif
1.7 V to 3.6 V Vdss 18-WLCSP, 1.86 mm x 2.14 mm Package 64 MHz Speed 64 KB (64K x 8 bits) Memory
MOQ: 1 |

STM32G041Y8Y6TR Genel Bakış

STMicroelectronics STM32G041Y8Y6TR is an Arm Cortex-M0+ 32-bit RISC microcontroller operating at up to 64 MHz, with 64 KB of Flash memory, 8 KB of SRAM, and an 18-WLCSP package measuring 1.86 mm by 2.14 mm. It operates from 1.7 V to 3.6 V and combines general-purpose control, analog conversion, communications, and security peripherals in a compact surface-mount package.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The STM32G0 family belongs to the 32-bit Arm Cortex-M microcontroller hierarchy and is positioned for compact, energy-efficient embedded control. STM32G041 devices are useful where a small package, low-voltage operation, and fast Cortex-M0+ execution are more important than the larger memory and peripheral sets found in higher-end microcontrollers.

Principal features include a 64 MHz Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, and a 1.7 V to 3.6 V operating range. The device also supports I2C operation in standard, fast, and fast-mode-plus configurations, reaching 100 kbit/s, 400 kbit/s, and 1 Mbit/s respectively. Its security-related resources include AES and RNG functions, making it suitable for connected equipment that requires hardware-assisted data protection.

The STM32G0 architecture combines deterministic peripheral operation with a compact pin count. Its 18-WLCSP format is intended for space-constrained assemblies where conventional leaded or larger plastic packages would consume unnecessary board area. Because the package contains only 18 terminals, design work must emphasize careful pin assignment, short analog and digital routes, and thermal-aware placement around the exposed ground and supply structures defined by the manufacturer.

Typical uses include smart-home sensors, compact industrial controllers, low-power IoT endpoints, battery-operated instruments, motor-control peripherals, metering equipment, and embedded automation modules. The combination of a 64 MHz core and low-voltage operation supports responsive control loops, while the Cortex-M0+ software ecosystem simplifies firmware development for displays, communications links, sensors, and actuator interfaces.

Layout should follow the manufacturer pinout and recommended land pattern exactly. Keep I2C routing short, provide the specified supply and bypass capacitance, and route high-current or fast-switching signals away from analog inputs. Before production release, verify package orientation, exposed-pad connection, flash-programming access, boot configuration, and operating-temperature limits against the current manufacturer documentation.

This product page combines device specifications, interface details, family-level replacement guidance, application guidance, and practical PCB considerations. It also distinguishes the verified 18-WLCSP configuration from larger STM32G0 packages, helping engineers determine compatibility before committing a compact assembly to a new PCB layout.

Drop-in alternatifler için STM32G041Y8Y6TR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

STM32G041Y8Y6TR Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 32-bit microcontroller (MCU)
Manufacturer STMicroelectronics
Series STM32G0
Processor Core Arm Cortex-M0+
Architecture 32-bit RISC
Maximum CPU Frequency 64 MHz
Flash Memory 64 KB (64K x 8 bits)
SRAM 8 KB
Operating Voltage Range 1.7 V to 3.6 V
Paket 18-WLCSP, 1.86 mm x 2.14 mm
Montaj Türü Surface mount
I2C Standard Mode Up to 100 kbit/s
I2C Fast Mode Up to 400 kbit/s
I2C Fast Mode Plus Up to 1 Mbit/s
Security Peripherals AES and RNG

STM32G041Y8Y6TR 18-wlcsp, 1.86 mm x 2.14 mm Pin Yapısı Kılavuzu

STM32G041Y8Y6TR (18-wlcsp, 1.86 mm x 2.14 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

18-wlcsp, 1.86 mm x 2.14 mm paket pin çizelgesi için STM32G041Y8Y6TR

Ayrıntılı pin çıkış verisi mevcut değil: STM32G041Y8Y6TR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

STM32G041Y8Y6TR için uygundur 6 uygulamas: Compact IoT Sensor Nodes, Industrial Automation Controllers, Battery-Powered Instrumentation, Smart Home and Security Devices, Motor Control and Auxiliary Drives, Metering and Data Acquisition.

🧩

Compact IoT Sensor Nodes

The STM32G041Y8Y6TR fits compact IoT sensor nodes because its Cortex-M0+ core operates up to 64 MHz while the complete device is offered in an 18-WLCSP package measuring 1.86 mm by 2.14 mm. A 1.7 V to 3.6 V supply range supports low-energy operating strategies, while 64 KB of Flash and 8 KB of SRAM are sufficient for sensor conditioning, local filtering, status reporting, and firmware updates. The I2C interface can operate up to 1 Mbit/s in fast-mode plus, enabling communication with compatible sensors and EEPROMs. Board-area savings are substantial, but designers should preserve adequate escape-routing space and validate the assembly process for the fine-pitch package.

🏭

Industrial Automation Controllers

The STM32G041Y8Y6TR is appropriate for small industrial automation modules where deterministic control and compactness are important. Its 64 MHz Arm Cortex-M0+ processor can execute control logic, state machines, communication handling, and diagnostic routines, while the 8 KB of SRAM supports working buffers and protocol stacks. The 1.7 V to 3.6 V operating range accommodates regulated industrial rails. I2C rates up to 1 Mbit/s provide a practical path to sensors, converters, and expansion devices. Deployment in an enclosure may raise ambient-temperature and thermal requirements, so engineers should verify the exact grade limits, provide stable supply filtering, and isolate switching nodes from precision analog inputs.

🔧

Battery-Powered Instrumentation

The STM32G041Y8Y6TR fits battery-powered instruments where low voltage, small size, and efficient 32-bit processing are valuable. Its 1.7 V minimum operating voltage supports direct integration with appropriately regulated low-energy power systems, and the 64 MHz Cortex-M0+ core provides responsive timing for sensor acquisition, display updates, and data logging. The 64 KB of Flash stores application firmware, while 8 KB of SRAM can hold active acquisition and communication state. The compact 18-WLCSP body also reduces instrument volume. To maximize battery life, disable unused peripherals, select suitable clock and sleep modes, and account for regulator efficiency and quiescent current rather than evaluating processor performance alone.

🏠

Smart Home and Security Devices

The STM32G041Y8Y6TR can serve as the control MCU in compact smart-home devices, access modules, and security peripherals. Its AES and RNG hardware resources support security-oriented data handling, while the Cortex-M0+ core manages local decisions, user input, indicators, and network interfaces. I2C support extends to 100 kbit/s standard mode, 400 kbit/s fast mode, and 1 Mbit/s fast mode plus, allowing connection to sensors and secure components when their timing requirements permit. The 18-WLCSP package keeps the device footprint small in wall controllers and compact security panels. Firmware should pair the hardware security features with protected keys, appropriate update mechanisms, and secure boot practices defined by the system architecture.

⚡

Motor Control and Auxiliary Drives

The STM32G041Y8Y6TR is suitable for compact motor-control auxiliaries, position sensors, and small actuator controllers. Its 64 MHz Cortex-M0+ performance supports fast loop execution, while 8 KB of SRAM accommodates control state, and I2C can connect to compatible position sensors or configuration devices. Operating from 1.7 V to 3.6 V allows integration into low-voltage power architectures. The small 18-WLCSP package is valuable in space-constrained drives, although it requires careful layout to prevent switching-node energy from coupling into analog measurements. Keep motor-power traces separate from sensor and ground paths, follow the manufacturer grounding recommendations, and validate timing behavior under worst-case motor and temperature conditions.

📊

Metering and Data Acquisition

The STM32G041Y8Y6TR can serve as the central controller in compact metering and data-acquisition products. Its 64 MHz Cortex-M0+ core handles sampling control, calibration routines, local storage, and communications, while 64 KB of Flash and 8 KB of SRAM support embedded application code and working buffers. The low-voltage operation supports portable instruments, and fast I2C connections can reduce wiring in distributed sensor nodes. Because the package exposes only 18 terminals, analog and digital resource allocation must be planned before schematic capture. Use the exact STM32G041Y8 device documentation to confirm ADC characteristics, pin multiplexing, and peripheral mappings, and verify measurement accuracy across temperature and supply ranges.

What is the operating voltage of STM32G041Y8Y6TR?
The STM32G041Y8Y6TR operates from 1.7 V to 3.6 V. This low-voltage range supports compact battery-powered equipment and low-energy embedded systems while providing the supply margin needed by its Cortex-M0+ core and connected peripherals. According to the STMicroelectronics STM32G041x6/x8 datasheet, the device is designed around a 3.3 V-class supply architecture, but designers should maintain the specified minimum voltage during startup, sleep transitions, and analog-converter operation.
How much memory does STM32G041Y8Y6TR have?
The STM32G041Y8Y6TR provides 64 KB of Flash memory and 8 KB of SRAM. The 64K x 8 Flash organization is identified in the manufacturer product listing and STM32G041x6/x8 documentation, while Mouser identifies 32 KB of Flash and 8 KB of RAM for the commercial listing. For firmware planning, use the exact x8 device variant and confirm the programmed image size against the current STMicroelectronics documentation before production release.
What processor does STM32G041Y8Y6TR use?
The STM32G041Y8Y6TR uses a 32-bit Arm Cortex-M0+ RISC core with a maximum operating frequency of 64 MHz. STMicroelectronics describes the STM32G041x6/x8 family as a mainstream Cortex-M0+ platform for low-power embedded control. The core provides deterministic control performance suitable for sensor nodes, metering products, compact automation controllers, and low-cost peripherals that need efficient embedded firmware execution.
Where can I download the STM32G041Y8Y6TR datasheet PDF?
The official STM32G041Y8Y6TR datasheet is available from STMicroelectronics through the STM32G041x6/x8 datasheet PDF, document DM00613881. Use the manufacturer's PDF when defining pin assignments, electrical limits, timing, and the 18-WLCSP land pattern. The STMicroelectronics STM32G041Y8 product page is the best starting point for related documentation, product status information, software, and device resources.
Where can I find the STM32G041Y8Y6TR pinout?
The STM32G041Y8Y6TR pinout is documented in the pin-definition and package-information sections of the STM32G041x6/x8 manufacturer datasheet. The component uses an 18-WLCSP package measuring 1.86 mm by 2.14 mm, so its terminal arrangement does not match the larger STM32G0 packages. Use the exact Y8 package drawing when assigning PCB pads and confirm exposed-pad and ground connections before releasing artwork.
What are the key specifications of STM32G041Y8Y6TR that engineers should know?
The STM32G041Y8Y6TR combines a 64 MHz Arm Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, and a 1.7 V to 3.6 V supply range in an 18-WLCSP package measuring 1.86 mm by 2.14 mm. Its I2C peripheral supports standard, fast, and fast-mode-plus rates of up to 100 kbit/s, 400 kbit/s, and 1 Mbit/s. AES and RNG resources also support hardware-assisted security in compact connected products.
What can replace STM32G041Y8Y6TR on the same PCB?
No verified pin-for-pin replacement for the STM32G041Y8Y6TR was identified in the available cross-reference results. A replacement must use the same 18-WLCSP footprint, match the 1.86 mm by 2.14 mm body, and preserve the complete terminal arrangement, supply requirements, peripheral assignments, and boot behavior. Other STM32G0 members can offer similar functions but may use a different package, so changing only the bill-of-material MPN is not a guaranteed drop-in substitution.
Is STM32G041Y8Y6TR the same as STM32G031J6M6TR?
No, the STM32G041Y8Y6TR and STM32G031J6M6TR are related 64 MHz Cortex-M0+ microcontrollers but are not established as pin-compatible equivalents. The target device is an 18-WLCSP STM32G041 variant, while STM32G031J6M6TR is a different STM32G0 package and ordering configuration. They may support related software and peripheral workflows, but PCB substitution requires a complete package, pin, electrical, and peripheral-function review.
When should I choose STM32G041Y8Y6TR instead of a larger STM32G0 package?
Choose STM32G041Y8Y6TR when board area is tightly constrained and the design needs a 64 MHz Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, and low-voltage operation in an 18-WLCSP package. Its 1.86 mm by 2.14 mm footprint can reduce board area, but it also demands careful escape routing and solder-process control. Select a larger package when more pins, easier probing, more I/O, or a simpler assembly is more important than minimum area.
STM32G041Y8Y6TR vs STM32G031J6M6TR: which is better for a compact IoT sensor node?
STM32G041Y8Y6TR is the stronger candidate when minimizing PCB area is the priority because it uses the compact 18-WLCSP package measuring 1.86 mm by 2.14 mm. STM32G031J6M6TR may be easier to assemble or inspect depending on its package, but it is not a verified drop-in replacement. The final choice should consider available I/O, ADC needs, pin escaping, production inspection, firmware support, and lifecycle requirements.
What is the best cross-brand equivalent for STM32G041Y8Y6TR?
No cross-brand equivalent can be recommended as a verified drop-in replacement for the STM32G041Y8Y6TR. The available search results did not identify a competing MCU with the same 18-WLCSP footprint and matching pin functions. A cross-brand candidate should not be selected merely because it uses Cortex-M0+ and runs at 64 MHz; it must also preserve package geometry, supply voltage, peripheral mapping, clock requirements, boot behavior, and production programming methods.
Where can I buy STM32G041Y8Y6TR online?
Use the Request a Quote form on this page to request STM32G041Y8Y6TR availability, current commercial terms, and a formal quotation. The manufacturer product page and authorized distribution listings identify the exact 18-WLCSP ordering code, but availability and commercial conditions can change. Buyers should state the required quantity, production schedule, packaging preference, and destination country when submitting the request.
What is the price of STM32G041Y8Y6TR?
Use the Request a Quote form on this page for the current STM32G041Y8Y6TR unit price and volume terms. Commercial pricing for this compact MCU depends on order quantity, production schedule, packaging, and market conditions, so a static price can become misleading. The request can be submitted with the required quantity and expected delivery window to obtain a current quotation.
What is the lead time and stock status for STM32G041Y8Y6TR?
The current stock status and lead time for STM32G041Y8Y6TR should be requested through the Request a Quote form on this page. STMicroelectronics lists the part as a mainstream STM32G0 microcontroller, but production and delivery conditions can vary by quantity and order date. Include the required delivery schedule and quantity in the request so the supplier can confirm the appropriate supply commitment.
Is STM32G041Y8Y6TR suitable for low-power IoT and industrial control applications?
The STM32G041Y8Y6TR is suitable for compact low-power IoT and industrial-control designs that operate from 1.7 V to 3.6 V. Its 64 MHz Cortex-M0+ core provides responsive control performance, while 64 KB of Flash and 8 KB of SRAM support embedded firmware and peripheral management. The 18-WLCSP package also supports space-constrained assemblies, provided power budgeting, thermal verification, and PCB escape routing are completed.
What design constraints matter when using an 18-WLCSP STM32G041Y8Y6TR?
The main constraints are fine-pitch assembly, limited escape routing, inspection, and thermal management. Follow the STM32G041x6/x8 datasheet for the exact 18-WLCSP land pattern, pin numbering, exposed-pad connection, and recommended PCB stack-up. Keep analog and I2C traces short, place bypass capacitors close to their supply pins, and review the soldering profile for the package's fine terminal pitch before high-volume assembly.

Mühendislik referans verileri: STM32G041Y8Y6TR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the STM32G041Y8Y6TR when a new design needs a 64 MHz Arm Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, low-voltage operation, and the smallest practical footprint in the STM32G0 family considered here. Its 18-WLCSP package can materially reduce board area, although fine-pitch assembly, inspection, and escape routing require deliberate PCB planning. It is also appropriate for compact IoT nodes, industrial controllers, metering equipment, and security products that need AES and RNG resources. Do not use it as a drop-in replacement for a larger STM32G0 package. If a replacement is mandatory, the candidate must match the complete 18-WLCSP pin arrangement, electrical limits, peripheral mapping, boot behavior, and programming process. Choose a larger STM32G0 package instead when easier assembly, more I/O, or simpler inspection has greater value than minimum board area.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Package 18-WLCSP, 1.86 mm x 2.14 mm
Brand STMicroelectronics
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 64 MHz
Flash Memory 64 KB (64K x 8 bits)
SRAM 8 KB
Operating Voltage Range 1.7 V to 3.6 V
I2C Maximum Rate 1 Mbit/s in fast mode plus
Security Resources AES and RNG
Architecture 32-bit RISC

Ana Farklılayıcılar

  • Compact 18-WLCSP implementation (karşılaştırma:STM32G031J6M6TR)
  • 64 MHz Cortex-M0+ performance in a small package (karşılaştırma:STM32G031J6M6TR)
  • Low-voltage operation (karşılaştırma:STM32G031J6M6TR)
  • Fast I2C connectivity (karşılaştırma:STM32G031J6M6TR)

Tasarım Notları

Treat the 18-WLCSP land pattern as a complete production constraint rather than a simple component swap. Follow the STM32G041x6/x8 package drawing for pad dimensions, pitch, exposed-pad geometry, solder-mask clearance, and copper definition. Preserve short escape paths from all terminals, maintain the package orientation mark, and design the surrounding assembly so inspection and rework access do not require accidental board flexing. Validate the final stack-up and solder-mask finish with the assembler.

Place all required supply and bypass capacitors directly beside their associated STM32G041Y8Y6TR pins, with the shortest practical return paths. Separate motor-switching nodes, high-current load paths, and fast digital clocks from analog sensor traces. Use a continuous or carefully stitched ground strategy consistent with the manufacturer recommendations, and check the exposed thermal or ground structure against the exact package drawing. Review crosstalk and return-current paths during signal-integrity analysis.

Do not treat every STM32G0 MCU as a direct substitute for this ordering code. The Y8 package is 18-WLCSP, and related members use different pin counts and exposed structures. Before changing the MPN, compare the complete terminal map, supply pins, ground connections, boot configuration, clock requirements, ADC resources, communication pins, programming interface, and package drawing. Also confirm the operating-temperature grade and relevant environmental qualification for the intended deployment.

Estimate the complete rail budget before selecting the supply regulator and bulk capacitance. The device operates from 1.7 V to 3.6 V, but the practical design must also satisfy startup, internal converter, I/O, and peripheral current requirements under worst-case conditions. Use the manufacturer's electrical characteristics for current and decoupling guidance, then verify voltage tolerance, sequencing, and transient response on the assembled board. Label calculated dissipation and current values as engineering estimates rather than datasheet limits.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The available manufacturer product and datasheet references do not provide an explicit compliance summary for this exact ordering code. Confirm RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification status with STMicroelectronics for the current production configuration.

Veri doğrulanma tarihi: 2026-11-14 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

STM32G041Y8Y6TR datasheet STM32G041Y8Y6TR pinout STM32G041Y8Y6TR datasheet pdf STM32G041Y8Y6TR equivalent STM32G041Y8Y6TR replacement STM32G041Y8Y6TR cross reference STM32G041Y8Y6TR price STM32G041Y8Y6TR stock STMicroelectronics STM32G041Y8Y6TR STM32G041Y8Y6TR 64MHz Cortex-M0+ STM32G041Y8Y6TR 18-WLCSP STM32G041Y8Y6TR IoT application STM32G041Y8Y6TR vs STM32G031J6M6TR STM32G041Y8Y6TR footprint

İlgili Bileşenler ve Terimler

STMicroelectronics STM32G041Y8Y6TR STM32G041Y8 STM32G0 Arm Arm Cortex-M0+ microcontroller 32-bit RISC microcontroller embedded control 64 KB Flash 8 KB SRAM 64 MHz 1.7 V to 3.6 V I2C Fast Mode Plus AES RNG 18-WLCSP surface mount IoT sensor nodes industrial automation motor control data acquisition STM32G031J6M6TR
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle