STMicroelectronics

STM32L475RCT3 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

MPN: STM32L475RCT3 ✓ Aktif
64-LQFP (10 mm x 10 mm) Package 80 MHz Speed 256 KB (256K x 8) Memory
MOQ: 1 |

STM32L475RCT3 Genel Bakış

The STMicroelectronics STM32L475RCT3 is an ultra-low-power 32-bit microcontroller built around the Arm Cortex-M4 processor with single-precision floating-point capability, operating at up to 80 MHz and integrating 256 KB of Flash memory. The device is offered in a 64-pin LQFP package measuring 10 mm by 10 mm and includes USB OTG and DFSDM connectivity.

A microcontroller is a programmable system-on-chip that combines a processor core, memory, and peripherals such as GPIO, timers, serial interfaces, and analog blocks. The STM32L4 family belongs to the broader embedded-controller hierarchy and is designed for low-power applications that require more processing capability than simple 8-bit or 16-bit controllers. Its Cortex-M4 architecture supports efficient digital signal processing and floating-point calculations while retaining a broad embedded software ecosystem.

Three headline features distinguish the STM32L475RCT3: an 80 MHz Arm Cortex-M4 core, 256 KB of embedded Flash, and a 64-pin LQFP package. The Cortex-M4 processor includes a single-precision FPU and DSP instructions, making the MCU suitable for control algorithms, audio-oriented processing, and sensor acquisition. USB OTG expands the available host or device connectivity, while the DFSDM peripheral supports digital filtering and signal acquisition tasks.

The STM32L475 device family emphasizes low-power operation without limiting real-time processing capability. At the system level, Flash provides executable program storage while the MCU integrates an Arm Cortex-M4 core, memory, communication peripherals, and low-power operating modes on one package. This consolidation reduces component count and makes the device appropriate for compact embedded systems that must process data locally while limiting energy use.

Typical uses include industrial sensing, connected industrial equipment, medical monitoring devices, USB-connected data acquisition, portable instruments, and low-power edge nodes. In each case, the 80 MHz core can execute control and signal-processing functions, while low-power modes support systems that spend substantial time idle or operating intermittently.

PCB implementation must preserve the 64-LQFP footprint, signal integrity, and power-delivery requirements shown in the manufacturer datasheet. Keep decoupling close to supply pins, route sensitive analog and clock signals away from fast switching nodes, and confirm toolchain, debug-probe, bootloader, and peripheral support before committing the firmware architecture.

This page combines the manufacturer device specifications with practical sourcing guidance, drop-in alternatives, application guidance, and design notes. These engineering-oriented details help evaluate the STM32L475RCT3 beyond a basic catalog description and support faster design, purchasing, and assembly decisions.

Drop-in alternatifler için STM32L475RCT3 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller STM32L475RCT3 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Flash Memory, LCD Controller, Performance, Supply Voltage Range.

STMicroelectronics
Package: 64-LQFP (10x10 mm)
LCD Controller: 8x40 / 4x44 segments
Performance: 100 DMIPS (1.25 DMIPS/MHz)
İle Karşılaştır STM32L475RCT3 →
STMicroelectronics
Package: 64-LQFP (10 x 10 mm)
Flash Memory: 1 MB (1M x 8)
LCD Controller: Up to 8x48 or 4x52 segments
İle Karşılaştır STM32L475RCT3 →

STM32L475RGT6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10 mm x 10 mm)
Same 80 MHz Cortex-M4 architecture and 256 KB Flash class; ordering suffix differs, with temperature-grade and configuration details requiring verification.

📋 Katalogda Olmayan Referans Alternatifi

STM32L476RGT6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
STMicroelectronics
📦 64-LQFP (10 mm x 10 mm)
ARM Cortex-M4 with FPU · 32-bit · 80 MHz · 100 DMIPS · 1 MB (1M x 8) · 128 KB · 1.71 V to 3.6 V · USB OTG FS, LCD, DFSDM, AES, HASH, RNG, CAN, Quad-SPI

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32L475RET6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10 mm x 10 mm)
Same 80 MHz Cortex-M4 architecture with 512 KB Flash, twice the target program-memory capacity; flash class differs by approximately 100 percent.

📋 Katalogda Olmayan Referans Alternatifi

STM32L476RET6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
STMicroelectronics
📦 64-LQFP (10 mm x 10 mm)
ARM Cortex-M4 with FPU and DSP instructions · 80 MHz · 100 DMIPS (1.25 DMIPS/MHz) · 512 KB · 128 KB · 1.7 V to 3.6 V · -40C to +85C (T6 suffix) · 64-LQFP (10x10 mm)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32L475RBT6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10 mm x 10 mm)
Same 80 MHz Cortex-M4 architecture and 64-LQFP footprint, but 128 KB Flash is 50 percent below the target 256 KB capacity.

📋 Katalogda Olmayan Referans Alternatifi

STM32L475RCT3 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M4 with single-precision FPU
Maximum CPU Frequency 80 MHz
Instruction Architecture 32-bit RISC
Flash Memory 256 KB (256K x 8)
DSP Support Arm single-precision DSP instructions
USB Connectivity USB OTG
Digital Filter Support DFSDM peripheral
Paket 64-LQFP (10 mm x 10 mm)
Pin Sayısı 64 pins
Montaj Türü Surface mount

STM32L475RCT3 64-lqfp (10 mm x 10 mm) Pin Yapısı Kılavuzu

STM32L475RCT3 (64-lqfp (10 mm x 10 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

64-lqfp (10 mm x 10 mm) paket pin çizelgesi için STM32L475RCT3

Ayrıntılı pin çıkış verisi mevcut değil: STM32L475RCT3.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

STM32L475RCT3 için uygundur 6 uygulamas: Industrial Sensor Acquisition, USB Connected Data Acquisition, Portable Medical Monitoring, Digital Signal Filtering, Low-Power Edge Node, Audio Interface and Control.

🏭

Industrial Sensor Acquisition

The STM32L475RCT3 fits industrial sensor nodes that need real-time sampling, local filtering, and communication without a separate DSP. Its 80 MHz Arm Cortex-M4 core includes single-precision floating-point and DSP instructions, allowing filter calculations to run locally while the MCU also manages acquisition timing and system control. The DFSDM peripheral is particularly relevant for connected sigma-delta sensor front ends. A practical implementation uses the DFSDM and timer resources to trigger conversions, stores results in memory, and reports data through a serial or industrial-network interface. Confirm analog pin mapping, supply levels, and peripheral availability in the manufacturer datasheet.

🖥️

USB Connected Data Acquisition

The STM32L475RCT3 is appropriate for USB-connected acquisition equipment because it combines USB OTG with an 80 MHz Cortex-M4 core and 256 KB of embedded Flash. The MCU can handle sampling control, buffering, configuration commands, and protocol processing in one device. USB OTG supports device or host-oriented connectivity depending on the selected implementation and supporting software. Designers should budget flash and SRAM for the USB stack, isolate sensitive analog inputs, and use the datasheet’s recommended decoupling and layout. The exact USB peripheral configuration and required system behavior should be checked against the STM32L475RC documentation.

💊

Portable Medical Monitoring

The STM32L475RCT3 supports portable medical-monitoring concepts that combine sensor conditioning, digital filtering, and a compact control system. Its 80 MHz Cortex-M4 processor with single-precision FPU can execute filtering and control algorithms, while 256 KB of Flash provides room for application and signal-processing code. The DFSDM interface can support suitable digital sensor front ends, reducing reliance on separate signal-conditioning components. Battery-powered implementations should exploit the STM32L4 family’s low-power modes and calculate average energy use from acquisition duty cycle, display activity, and wireless activity. Medical claims and safety requirements must be validated separately from component selection.

📡

Digital Signal Filtering

The STM32L475RCT3 is well suited to digital filter and signal-processing tasks that benefit from an Arm Cortex-M4 FPU without requiring a high-end application processor. Its processor supports Arm single-precision DSP instructions at frequencies up to 80 MHz, enabling real-time filtering, transforms, and control loops. DFSDM can be used with compatible sensor interfaces, reducing the computational load associated with converting and filtering certain sensor signals. Engineers should benchmark the complete filter chain, use deterministic timer-based sampling, and avoid assuming that nominal CPU frequency alone determines throughput. Cache, memory latency, and interrupt behavior should be profiled with the intended compiler and optimization settings.

🧩

Low-Power Edge Node

The STM32L475RCT3 fits compact edge nodes that periodically acquire information, process it locally, and communicate through low-duty-cycle interfaces. The ultra-low-power STM32L4 architecture combines an 80 MHz Cortex-M4 core with low-power operating behavior, allowing the same MCU to wake for processing and return to a low-consumption state. Its 256 KB Flash supports application firmware and protocol stacks, while DFSDM and USB OTG expand the sensing and connectivity options. A practical design should minimize always-on peripherals, use the low-power modes appropriate to the required wake-up time, and size decoupling for the worst-case switching event. Exact current figures depend on voltage, clock, peripherals, and temperature.

🎧

Audio Interface and Control

The STM32L475RCT3 can serve as the control and processing MCU in audio interfaces because its Cortex-M4 FPU and DSP instructions support real-time digital processing at up to 80 MHz. The microcontroller can coordinate USB audio data, implement mixing or filtering functions, and manage user controls while 256 KB of Flash stores application code. DFSDM may be relevant for compatible microphone or sensor inputs. Designers should evaluate latency, sample-rate requirements, DMA use, and clocking against the manufacturer peripheral documentation. USB audio timing and synchronization need dedicated validation because generic processor performance does not guarantee compliant audio behavior.

What are the key specifications of STM32L475RCT3 that engineers should know?
The STM32L475RCT3 combines an 80 MHz Arm Cortex-M4 core, 256 KB of Flash, a single-precision FPU, USB OTG, DFSDM, and a 64-pin LQFP package. According to the STMicroelectronics STM32L475RC datasheet, the Cortex-M4 processor supports Arm single-precision DSP instructions, while the STM32L475xx family is designed around low-power embedded operation. The LQFP package measures 10 mm by 10 mm. This combination makes the device suitable for control-intensive systems, sensor interfaces, portable instrumentation, and USB-connected embedded products that need more processing capability than a basic microcontroller.
Where can I download the STM32L475RCT3 datasheet PDF?
The official STM32L475RCT3 datasheet is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32l475rc.pdf. It documents the STM32L475RC family configuration represented by the STM32L475RCT3 ordering code, including the 80 MHz Cortex-M4 core, 256 KB Flash option, USB OTG, DFSDM, electrical characteristics, and the 64-LQFP pin configuration. Use the manufacturer document for pin assignments, power requirements, clock limits, package dimensions, and peripheral support rather than relying on an abbreviated distributor summary.
Where is the STM32L475RCT3 pinout located?
The STM32L475RCT3 pinout is located in the pin-description tables and package drawings in the official STMicroelectronics STM32L475RC datasheet. The device uses a 64-LQFP, 10 mm by 10 mm package, so board designers should map all 64 physical pins, including power, ground, reset, clock, debug, and peripheral functions, against the exact device variant. The digital pin-muxing table should also be consulted before assigning a peripheral signal because several alternate functions can be routed to different pins.
What can replace the STM32L475RCT3 on the same PCB footprint?
The closest same-footprint choices are compatible STM32L475 and STM32L476 devices in the 64-pin LQFP configuration, including STM32L475RGT6, STM32L476RGT6, STM32L475RET6, STM32L476RET6, and STM32L475RBT6. The first four preserve the 80 MHz Cortex-M4 architecture and 256 KB or greater Flash configuration, while STM32L475RBT6 provides 128 KB Flash. A replacement still requires checking pin multiplexing, supply voltage, exposed peripheral set, firmware support, temperature grade, and lifecycle requirements before it is treated as a drop-in part.
Is STM32L475RCT3 suitable for USB and digital signal processing applications?
The STM32L475RCT3 is suitable for USB-connected instrumentation and digital signal processing because it includes USB OTG and an Arm Cortex-M4 processor with a single-precision FPU and DSP instructions. The MCU operates at up to 80 MHz and provides 256 KB of Flash for program storage. According to the STMicroelectronics STM32L475RC datasheet, USB OTG and DFSDM are integrated device features. DFSDM can be valuable in sensor-acquisition designs, while the Cortex-M4 arithmetic resources reduce execution time for filters and other digital signal-processing workloads.
What is the difference between STM32L475RCT3 and STM32L476RGT6?
The STM32L475RCT3 and STM32L476RGT6 are closely related STM32L4 devices in the 64-LQFP family, both using an Arm Cortex-M4 core capable of 80 MHz operation. Their ordering codes refer to different flash-density options, temperature-grade or ordering suffixes, and device configurations that must be checked in the manufacturer ordering-information table. The STM32L476RGT6 can therefore serve as a candidate replacement when its complete configuration matches the board, but it should not be treated as an automatic substitute without reviewing memory size, pin multiplexing, peripherals, and firmware compatibility.
When should I choose STM32L475RCT3 over STM32L475RBT6?
Choose the STM32L475RCT3 when the design benefits from 256 KB of embedded Flash and the broader configuration enabled by that ordering code. The STM32L475RBT6 offers 128 KB of Flash, making it more appropriate for smaller applications where code size is tightly constrained. Both devices belong to the STM32L475 family and can use the 64-LQFP footprint, but Flash capacity, temperature grade, pin functions, and peripherals must be checked against the exact suffix. The choice should follow code-size measurement, firmware plan, and production configuration rather than core frequency alone.
When should I choose STM32L475RCT3 over STM32L476RGT6?
Choose the STM32L475RCT3 when the product specification is already validated around the STM32L475 family and the design does not require a feature unique to STM32L476. Choose STM32L476RGT6 only after confirming that its additional or revised resources improve the application and that the memory, peripheral, pin, and firmware differences are acceptable. Both are 80 MHz Cortex-M4-class devices in the 64-LQFP family, so clock speed alone should not decide the selection. Use the manufacturer ordering information to identify the exact functional differences.
Where can I buy STM32L475RCT3 online?
Use the Request a Quote form on this page to request STM32L475RCT3 pricing, stock confirmation, and lead time from XAIPART. The exact quantity, package suffix, temperature grade, and delivery requirements should be included in the request to support an accurate quotation. The manufacturer part number is STM32L475RCT3, and the device is specified as a 64-LQFP configuration. This page does not provide a static price because commercial terms and availability can change; the quote form is the appropriate route for current commercial information.
What is the price of STM32L475RCT3?
Current STM32L475RCT3 pricing must be obtained through the Request a Quote form on this page because prices depend on quantity, sourcing condition, and delivery requirements. Include the required order quantity, target date, and whether the parts must be delivered as an exact 64-LQFP configuration. The pricing workflow uses structured commercial data rather than a static article price, preventing an outdated figure from being presented as current. A written quotation can also confirm lot traceability, delivery schedule, and manufacturer-orderable configuration.
What is the lead time for STM32L475RCT3?
Request the current STM32L475RCT3 lead time through the Request a Quote form on this page, including the required quantity, shipment destination, and target production date. Lead time can vary with order volume, component availability, and manufacturer replenishment conditions, so a generic delivery period should not be treated as a commitment. The exact orderable identifier is STM32L475RCT3 with a 64-LQFP package. XAIPART can confirm availability and a schedulable delivery quantity after receiving those project-specific requirements.
Is STM32L475RCT3 in stock?
Use the Request a Quote form on this page for the current STM32L475RCT3 stock status and the quantity that can be allocated to your schedule. The component is an exact 64-LQFP STM32L475 configuration, so include the MPN and required quantity in the request to avoid ambiguity with related flash-density or temperature-grade variants. Stock levels are time-sensitive and should be confirmed for the specific order rather than inferred from the existence of a product listing. The quotation response can include available quantity, lead time, and traceability details.
What is the best STMicroelectronics equivalent for STM32L475RCT3?
The best STMicroelectronics equivalent depends on which resource is limiting the design. STM32L475RGT6 is the closest same-family candidate with the same 80 MHz Cortex-M4 architecture and 256 KB Flash class, while STM32L476RGT6 can be considered when STM32L476 resources are needed. For larger firmware, STM32L475RET6 or STM32L476RET6 provide a higher-density ordering option. None should be approved solely by package name; confirm the ordering table, pin multiplexing, voltage limits, temperature grade, peripherals, and firmware migration requirements.
Is STM32L475RCT3 the same as STM32L476RGT6?
No, the STM32L475RCT3 and STM32L476RGT6 are related but not identical orderable devices. Both occupy the STM32L4 ultra-low-power product family and use an 80 MHz Arm Cortex-M4 architecture in a 64-LQFP package. Differences in flash-density suffix, temperature-grade suffix, and device resources must be reviewed in the manufacturer ordering information. The STM32L476RGT6 can be a close replacement candidate, but firmware initialization, peripheral availability, pin multiplexing, and application qualification should be completed before production use.
What power and thermal checks are needed for STM32L475RCT3?
Check the STM32L475RCT3 supply range, internal regulator behavior, peripheral load current, and package thermal limits against the STMicroelectronics STM32L475RC datasheet before finalizing the power system. Keep the permitted operating voltage at every pin within its specified range, provide suitable local decoupling, and calculate worst-case supply dissipation from the actual clock rate, enabled peripherals, and I/O loading. Use the package land pattern and thermal information in the datasheet for PCB layout. Ambient temperature and switching activity should be included in the thermal assessment rather than relying on nominal processing performance.

Mühendislik referans verileri: STM32L475RCT3 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the STM32L475RCT3 when a design requires an 80 MHz Arm Cortex-M4 core, 256 KB of Flash, DFSDM, USB OTG, and a 64-LQFP footprint. It is a practical fit for low-power industrial sensing, USB data acquisition, portable monitoring, and real-time signal-processing products. STM32L475RGT6 is the closest same-family alternative when its ordering suffix satisfies the required temperature and configuration. Consider STM32L476RGT6 when STM32L476-specific resources are useful, but review firmware and peripheral differences. Choose STM32L475RET6 or STM32L476RET6 when the larger 512 KB Flash option reduces memory pressure, and consider STM32L475RBT6 only when 128 KB is sufficient. In every case, verify pin multiplexing, RAM, supply limits, peripheral availability, temperature grade, tooling, and production qualification before approving a replacement.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün STM32L475RGT6 STM32L476RGT6 STM32L475RET6 STM32L476RET6 STM32L475RBT6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm)
Processor Core Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4
Maximum CPU Frequency 80 MHz 80 MHz 80 MHz 80 MHz 80 MHz 80 MHz
Flash Memory 256 KB 256 KB 256 KB 512 KB 512 KB 128 KB
Floating-Point Unit Single precision Single precision Single precision Single precision Single precision Single precision
Power Class Ultra-low-power Ultra-low-power Ultra-low-power Ultra-low-power Ultra-low-power Ultra-low-power

Ana Farklılayıcılar

  • Provides twice the Flash memory of STM32L475RBT6 while retaining the same 80 MHz Cortex-M4 architecture (karşılaştırma:STM32L475RBT6)
  • Uses the same 64-LQFP footprint as STM32L476RGT6 for board-level reuse (karşılaştırma:STM32L476RGT6)
  • Combines 256 KB Flash with DFSDM and USB OTG in one ultra-low-power MCU (karşılaştırma:STM32L475RET6)

Tasarım Notları

Follow the STMicroelectronics 64-LQFP land pattern and pin-1 orientation exactly; even a reversed package does not guarantee a drop-in substitution. Place all required supply bypass capacitors close to their associated power pins, with the shortest return path through the ground plane. Keep USB traces short, impedance-controlled according to the board stack-up, and away from analog inputs and high-current switching paths. Confirm exposed pad, thermal, and copper requirements in the manufacturer package drawings before releasing the PCB files.

Calculate the power budget from the actual operating clock, enabled peripherals, USB activity, and I/O loading rather than the maximum CPU frequency alone. Validate every supply rail against the manufacturer’s electrical-characteristics table and ensure peripheral-specific constraints are met during startup, sleep, and wake transitions. Use local decoupling and a stable reference arrangement to limit disturbance to DFSDM and USB interfaces. The exact current and voltage limits depend on the operating mode and temperature, so use the manufacturer datasheet as the controlling reference.

A matching package and Cortex-M4 core do not by themselves prove firmware compatibility. Before substituting an STM32L475 or STM32L476 ordering code, compare the flash and RAM capacities, GPIO alternate functions, USB configuration, DFSDM channels, clock tree, pin assignments, and the exact temperature and ordering suffixes. Review the startup code and peripheral initialization sequence under the STM32Cube and CMSIS versions used by the project, then exercise boundary conditions including reset, sleep, wake, USB suspend, and sensor acquisition.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance status was not identified for the exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification requirements using STMicroelectronics documentation and project-specific quality records.

Veri doğrulanma tarihi: 2026-11-14 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

STM32L475RCT3 datasheet STM32L475RCT3 pinout STM32L475RCT3 datasheet pdf STM32L475RCT3 64 LQFP STM32L475RCT3 80MHz Cortex-M4 STM32L475RCT3 256KB Flash STM32L475RCT3 USB OTG STM32L475RCT3 DFSDM STM32L475RCT3 equivalent STM32L475RCT3 replacement STM32L475RCT3 footprint STM32L475RCT3 price STM32L475RCT3 stock STMicroelectronics STM32L475RCT3

İlgili Bileşenler ve Terimler

STMicroelectronics STM32L475RCT3 STM32L475RC STM32L475RGT6 STM32L476RGT6 STM32L475RET6 STM32L476RET6 STM32L475RBT6 Arm Cortex-M4 Arm Cortex-M4F single-precision FPU DSP instructions ultra-low-power microcontroller embedded microcontroller 32-bit RISC processor STM32L4 product family 256 KB Flash USB OTG DFSDM 64-LQFP LQFP package family surface mount industrial sensor acquisition USB data acquisition medical monitoring
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle