Microchip Technology

SY88973VKG - 3.2Gbps CML Post Amp for Fiber | Microchip

MPN: SY88973VKG ✓ Aktif
3.3 V or 5 V Vdss 10-MSOP Package
MOQ: 1 |

SY88973VKG Genel Bakış

The Microchip SY88973VKG is a 3.2 Gbps CML low-power limiting post amplifier operating from a 3.3 V or 5 V supply and packaged in a 10-MSOP. It is designed for CML signal-chain applications where limiting, signal conditioning, and loss-of-signal indication are required. The device is identified as a 10-pin amplifier IC with a TTL loss-of-signal output.

A CML post amplifier is a high-speed differential signal-conditioning device commonly positioned after a transmitter, optical receiver, or another signal source. Its limiting function controls signal amplitude, while its CML output supports low-voltage differential signaling in high-speed communications equipment. Within the signal-path hierarchy, the SY88973VKG belongs to the broader class of amplifier ICs and interface ICs used in optical and telecommunications links.

The manufacturer datasheet identifies a maximum signaling rate of 3.2 Gbps, operation from either 3.3 V or 5 V, and a low-power CML limiting-post-amplifier architecture. Loss-of-signal behavior is a defining feature: the stated LOS hysteresis is 4.6 dB, and a voltage factor of 1.7 is required to deassert the indication. This hysteresis helps distinguish a genuine loss-of-signal condition from small signal-level fluctuations near the detection threshold.

The SY88973 family separates high-speed data amplification from loss-of-signal monitoring. The limiting post-amplifier path restores a usable differential signal level, while the TTL LOS indication provides a separate digital status function for system supervision. This arrangement is useful when downstream circuitry must distinguish a valid recovered signal from an interrupted or below-threshold optical or copper link without examining the high-speed data waveform directly.

Typical uses include CML interfaces for optical transceivers, fiber-optic terminal equipment, PON-related signal paths, telecommunications line equipment, and test or measurement systems that process multi-gigabit differential signals. In these systems, the 10-MSOP package keeps the device compact, while the 3.3 V and 5 V operating options support different generations of communications equipment and logic interfaces.

PCB implementation should preserve controlled-impedance differential routing, provide the connections required by the CML output, and route the TTL LOS signal away from sensitive high-speed nodes. Component placement and return paths should minimize parasitic mismatch and unintended coupling between the high-speed differential channel and the loss-of-signal output.

This product page consolidates the confirmed operating characteristics, package information, loss-of-signal behavior, application guidance, and sourcing details for SY88973VKG. It also distinguishes the verified device information from drop-in replacement options that would require separate package, pinout, signal-integrity, and parameter validation.

Drop-in alternatifler için SY88973VKG — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

SY88973VKG Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type CML low-power limiting post amplifier
Maximum Data Rate 3.2 Gbps
Besleme Gerilimi 3.3 V or 5 V
Output Logic CML
Loss-of-Signal Output TTL
LOS Hysteresis 4.6 dB
LOS Deassert Voltage Factor 1.7
Paket 10-MSOP
Alternative Package Description 10-TFSOP
Package Width 3.00 mm
Package Length 0.118 in
Montaj Türü Surface mount

SY88973VKG 0.118 in Pin Yapısı Kılavuzu

SY88973VKG (0.118 in paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

0.118 in paket pin çizelgesi için SY88973VKG

Ayrıntılı pin çıkış verisi mevcut değil: SY88973VKG.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

SY88973VKG için uygundur 6 uygulamas: Optical Transceiver Receive Paths, PON and Fiber-Terminal Equipment, Telecommunications Backplane Links, Network Equipment Link Interfaces, High-Speed Test and Measurement Systems, Industrial and Instrumentation Links.

🌐

Optical Transceiver Receive Paths

The SY88973VKG fits a high-speed receive path where a recovered differential signal requires limiting before it reaches another CML-compatible circuit. Its stated maximum data rate of 3.2 Gbps provides alignment with multi-gigabit optical links, while the 3.3 V or 5 V supply options accommodate different transceiver architectures. The separate TTL LOS indication allows supervisory logic to monitor signal presence without directly sampling the high-speed differential waveform. Designers should preserve controlled-impedance routing, provide the terminations required by the source and load, and validate the complete channel from the optical or electrical source through the amplifier output.

🌐

PON and Fiber-Terminal Equipment

The SY88973VKG is appropriate for PON-oriented and fiber-terminal equipment that uses CML signaling in a multi-gigabit link. The 3.2 Gbps specification supports link rates within that class, and operation from either 3.3 V or 5 V gives designers flexibility when the terminal contains mixed-generation logic. The 4.6 dB LOS hysteresis helps maintain a stable link-status indication as the received level changes around its threshold. Board implementation should keep the differential route short and continuous, maintain return paths beneath the signal path, and separate the TTL status output from sensitive high-speed nodes to minimize coupling.

🏭

Telecommunications Backplane Links

The SY88973VKG can be used in telecommunications equipment that conditions short-reach differential signals operating at rates up to 3.2 Gbps. Its CML output is suited to compatible backplane or line-card interfaces, while the TTL LOS signal provides a convenient supervisory status input for protection and diagnostics. The 10-MSOP package supports compact placement but leaves little tolerance for uncontrolled return paths or impedance discontinuities. Engineers should route the differential pair as a controlled-impedance structure, minimize vias and branch stubs, and verify common-mode and differential behavior under the worst-case loading specified by the connected circuit.

🖥️

Network Equipment Link Interfaces

The SY88973VKG fits network equipment interfaces where a 3.2 Gbps CML signal must be limited and monitored for loss of signal. Its selectable 3.3 V or 5 V operation supports equipment built around different logic generations, and the separate TTL LOS output can feed a link-management controller. The key engineering consideration is preserving the integrity of the differential path: maintain impedance geometry through the SY88973VKG, avoid placing unrelated circuitry beneath the pair, and provide local return-path continuity. Validation should cover the intended data rate, connected load, cable or PCB channel, and fault conditions that drive the signal toward the LOS threshold.

🔧

High-Speed Test and Measurement Systems

The SY88973VKG can serve in test and measurement equipment that receives CML signals from remote instrumentation, optical converters, or communication devices. A 3.2 Gbps limiting stage can stabilize the signal amplitude before measurement or downstream processing, while the TTL LOS indication provides a direct status signal for test sequencing. Because the device is a communications IC rather than a general-purpose instrument amplifier, the engineer must verify amplitude levels, loading, and timing against the manufacturer datasheet. Use short differential routes, suitable terminations, and careful separation from clocks and switching nodes to keep test-system noise from degrading the recovered waveform.

🏭

Industrial and Instrumentation Links

The SY88973VKG is suitable for industrial and instrumentation links that use CML over short copper or optical paths. The 3.3 V and 5 V operating options allow integration with multiple instrument-logic voltage domains, while the 10-MSOP package supports compact channel cards. The 4.6 dB LOS hysteresis provides a defined margin between assertion and deassertion behavior, which is useful when supervisory software tracks link health. Designers should account for the complete signal path rather than the IC alone, including source amplitude, termination, channel loss, connector transitions, grounding, and the timing relationship between data recovery and the TTL status indication.

What is the SY88973VKG?
The SY88973VKG is a Microchip 3.2 Gbps CML low-power limiting post amplifier with a TTL loss-of-signal output in a 10-MSOP package. According to the manufacturer datasheet, it operates from either a 3.3 V or 5 V supply. The device is intended for high-speed differential signal-conditioning paths where amplitude limiting and link-status monitoring are required.
What are the key specifications of SY88973VKG that engineers should know?
The SY88973VKG supports data rates up to 3.2 Gbps, operates from 3.3 V or 5 V, and produces a CML output with a separate TTL loss-of-signal indication. The manufacturer datasheet states that the LOS hysteresis is 4.6 dB and that a voltage factor of 1.7 is needed to deassert the indication. Its package is the compact 10-MSOP, listed also as 10-TFSOP.
Where can I download the SY88973VKG datasheet PDF?
The SY88973VKG datasheet PDF is available from the official Micrel manufacturer-document link listed on this page. It describes the 3.2 Gbps CML low-power limiting post amplifier, 3.3 V and 5 V operation, and the 4.6 dB loss-of-signal hysteresis. Use the pin-description table and electrical-characteristics tables in that document when assigning PCB connections and checking design limits.
Where can I find the SY88973VKG pinout?
The SY88973VKG pin assignment is found in the pin-description section of the manufacturer datasheet for the 10-MSOP package. The device is a 10-pin amplifier IC, but its exact signal names, power pins, and exposed-pad arrangement must be taken from that table before layout. The 10-MSOP package is identified as 3.00 mm wide and 0.118 inches long.
What supply voltage does the SY88973VKG require?
The SY88973VKG is specified for operation from either 3.3 V or 5 V. The manufacturer datasheet identifies the SY88973V as a 3.3 V and 5 V CML limiting post amplifier. The actual rail and bypass-capacitor arrangement must satisfy the power-pin definitions and decoupling recommendations in the package pin table and application circuit.
What data rate can the SY88973VKG handle?
The SY88973VKG supports signaling rates up to 3.2 Gbps. This maximum rate is stated in the manufacturer description for the SY88973V family. Signal integrity at that rate depends on the complete link implementation, including controlled-impedance routing, suitable terminations, connector or optical-channel characteristics, and the source and load connected to the amplifier.
How does the SY88973VKG loss-of-signal output work?
The SY88973VKG provides a separate TTL loss-of-signal indication with 4.6 dB hysteresis. According to the manufacturer datasheet, a voltage factor of 1.7 is required to deassert LOS. This hysteresis helps prevent status chatter when the monitored signal changes around its detection threshold. The exact LOS thresholds and logic polarity should be confirmed from the datasheet test conditions.
Where can I buy SY88973VKG online?
Use the Request a Quote form on this page to request SY88973VKG availability, lead time, and a current quotation. The exact MPN is also listed by major component distributors, but inventory and order terms can change independently of the manufacturer. Providing the 10-MSOP package and 576-1413-ND distributor part number as reference identifiers can reduce ordering ambiguity.
What is the price of SY88973VKG?
The current SY88973VKG quotation is available through the Request a Quote form on this page. Market pricing for obsolete, niche, or limited-production communications ICs can change materially with inventory and sourcing conditions. The form is the appropriate route for an exact-MPN quote, quantity pricing, scheduled delivery information, and confirmation of the required package and packing format.
What is the lead time for SY88973VKG?
The current lead time for SY88973VKG should be confirmed through the Request a Quote form on this page. Lead time can depend on lot availability, manufacturing status, package configuration, order quantity, and delivery destination. The part is listed under the exact ordering code SY88973VKG and the associated 10-MSOP package, so those identifiers should remain unchanged in the request.
Is SY88973VKG in stock?
Current SY88973VKG inventory should be requested through the Request a Quote form on this page. A distributor product page may show historical or changing availability, while a firm stock confirmation requires the exact MPN, quantity, and ship-to information. The device is identified as a 10-MSOP CML limiting post amplifier, so no package substitution should be made without engineering review.
What can replace the SY88973VKG?
No verified pin-to-pin drop-in replacement for the SY88973VKG is established on this page. A suitable replacement must match the 10-MSOP footprint, CML output, 3.3 V or 5 V operation, 3.2 Gbps signaling capability, TTL LOS function, and required LOS thresholds. Use the Request a Quote form for sourcing help, and require pin-level and signal-integrity validation before approving any substitute.
Is SY88973VKG the same as SY88973BL?
The SY88973VKG and SY88973BL are not established as identical parts by the available manufacturer information. The SY88973BL is described as a 3.3 V, 3.2 Gbps CML low-power limiting post amplifier, while SY88973VKG is identified as the 3.3 V or 5 V version in a 10-MSOP. Package, pinout, LOS behavior, and electrical limits must be compared before considering either device a replacement.
When should I choose the SY88973VKG instead of another limiting post amplifier?
Choose the SY88973VKG when the design specifically requires a 10-MSOP limiting post amplifier with CML output, TTL LOS indication, operation from 3.3 V or 5 V, and operation up to 3.2 Gbps. Selection should be based on verified package compatibility, supply requirements, LOS thresholds, differential signal levels, and channel performance rather than the device description alone.
Is the SY88973VKG suitable for optical transceiver and fiber-link signal paths?
The SY88973VKG is suitable for high-speed differential signal paths that require CML output and separate loss-of-signal monitoring, including optical-transceiver and fiber-link circuitry. Its stated 3.2 Gbps capability and 3.3 V or 5 V operation suit multi-gigabit links, but final signal integrity depends on the complete channel, terminations, layout, and the source and load connected to the device.

Mühendislik referans verileri: SY88973VKG — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

The SY88973VKG is the appropriate choice when the design requires a 10-MSOP limiting post amplifier specified for 3.2 Gbps CML signaling, 3.3 V or 5 V operation, and a separate TTL loss-of-signal output. The 4.6 dB LOS hysteresis and stated 1.7 deassert voltage factor are important when evaluating link supervision behavior. A functionally similar part is not automatically a drop-in replacement: its package dimensions, pin assignment, CML levels, supply requirements, LOS polarity, and high-speed performance must match. No verified same-package alternative is established, so engineers should treat substitution as a qualification project rather than a catalog substitution. For a new design, use the exact MPN and its manufacturer datasheet to establish the footprint, power architecture, differential routing, terminations, and test limits.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Brand Microchip Technology
Product Type CML low-power limiting post amplifier
Maximum Data Rate 3.2 Gbps
Supply Voltage 3.3 V or 5 V
Output Logic CML
Loss-of-Signal Output TTL
LOS Hysteresis 4.6 dB
Package 10-MSOP

Tasarım Notları

Treat the CML connection as a controlled-impedance differential pair. Keep both conductors within the same referenced return structure, avoid unnecessary vias and stubs, and prevent unrelated fast-edge signals from running parallel to the pair. Validate the complete path from the driver through the SY88973VKG to the terminating load because the device's 3.2 Gbps capability does not by itself guarantee acceptable channel performance.

Place the SY88973VKG close to the high-speed source or receiver so the sensitive differential segment remains short. Maintain the package's recommended bypass-capacitor arrangement and provide a low-impedance connection to the relevant supply and ground pins. Keep the TTL LOS route away from the CML nodes because switching current in the status trace can couple into the high-speed signal when the traces are close or parallel.

Do not treat a similar 3.3 V or 5 V limiting amplifier as interchangeable without checking the 10-MSOP footprint and every pin function. Verify differential signal levels, supply sequencing, input and output termination, LOS polarity, 4.6 dB hysteresis, and the required 1.7 deassert voltage factor. Also confirm that any lead-free or automotive procurement requirement matches the exact ordering code rather than relying only on the family name.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance declarations were not present in the verified manufacturer and distributor citations. Confirm the current material and environmental declarations for the exact ordering code before production release.

Veri doğrulanma tarihi: 2026-11-20 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

SY88973VKG datasheet SY88973VKG pinout SY88973VKG datasheet pdf SY88973VKG equivalent SY88973VKG replacement SY88973VKG cross reference SY88973VKG price SY88973VKG stock Microchip SY88973VKG SY88973VKG 10MSOP amplifier SY88973VKG 3.2Gbps CML SY88973VKG fiber optic amplifier SY88973VKG application circuit SY88973VKG vs SY88973BL

İlgili Bileşenler ve Terimler

Microchip Technology Micrel Semiconductor SY88973VKG SY88973V SY88973BL CML limiting post amplifier amplifier IC interface IC high-speed differential signaling loss-of-signal indication TTL 3.2 Gbps signaling rate 4.6 dB LOS hysteresis 1.7 LOS deassert voltage factor 3.3 V power supply 5 V power supply 10-MSOP package 10-TFSOP package surface-mount package optical transceiver PON fiber-optic terminal equipment telecommunications equipment controlled-impedance routing
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle