Texas Instruments

TLV2785CD - Quad 8MHz Rail-to-Rail Op Amp | Texas Instruments

MPN: TLV2785CD ✓ Aktif
3.6 V Vdss 16-SOIC Package
MOQ: 1 |

TLV2785CD Genel Bakış

Texas Instruments TLV2785CD is a four-circuit, rail-to-rail operational amplifier built for low-voltage, high-speed signal-processing systems. The device operates from a 3.6 V nominal supply and offers an 8 MHz gain-bandwidth product, making it suitable for portable instrumentation, industrial sensing, signal conditioning, and low-voltage analog systems. It is packaged for surface-mount assembly in a small-outline integrated circuit package, with the exact terminal configuration identified in the manufacturer ordering information.

An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. Rail-to-rail input and output operation extends the usable input and output range toward the supply rails, which is valuable in 3.6 V systems where conventional amplifier headroom is limited. The TLV2785 family integrates four amplifier channels and a shutdown function, allowing multiple analog signals to be conditioned while supporting controlled power management.

The TLV2785CD combines a quad amplifier configuration, 3.6 V supply operation, and an 8 MHz gain-bandwidth product. Its rail-to-rail architecture is particularly relevant to battery-powered equipment, sensor interfaces, and low-voltage industrial controls where signal levels may approach the available supply voltage. The shutdown capability can reduce system power when the analog section is not required, although sequencing requirements must be checked against the selected power architecture.

Texas Instruments describes the TLV2785 as a high-speed, rail-to-rail input/output operational amplifier family with shutdown. This positioning distinguishes it from slower precision-oriented amplifiers and makes it more appropriate for applications requiring moderate bandwidth rather than exceptionally low offset or drift. The four-channel implementation also reduces the number of amplifier packages needed when several independent low-voltage signals must be amplified or buffered.

Typical uses include sensor signal conditioning, buffered analog inputs, low-voltage data-acquisition channels, industrial interface circuits, portable measurement equipment, and general-purpose analog signal chains. In these systems, the 8 MHz bandwidth provides useful response for fast-changing signals while the rail-to-rail behavior improves utilization of the available supply range.

Designers should verify the complete pin assignment, supply limits, electrical characteristics, and shutdown behavior in the manufacturer datasheet before layout release. Decoupling capacitors should be placed close to the supply pins, input and output routing should minimize parasitic capacitance, and unused amplifier channels require appropriate input-state handling rather than being left completely floating.

This product summary combines the manufacturer product description with package, application, and replacement guidance. It also identifies where engineers must consult the official TLV2785 documentation for exact pin names, operating limits, test conditions, and recommended application circuits before committing a PCB design to production.

Drop-in alternatifler için TLV2785CD — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller TLV2785CD (aynı form faktörü ve ayağa oturma).

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

TLV2785CD Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Quad operational amplifier
Number of Circuits 4 circuits
Nominal Supply Voltage 3.6 V
Gain-Bandwidth Product 8 MHz
Input Type Rail-to-rail
Çıkış Türü Rail-to-rail
Shutdown Function Yes
Product Classification Standard general-purpose amplifier
Paket 16-SOIC
Montaj Türü Surface mount
Temperature Grade Commercial
Terminal Form Gull wing
Package Shape Rectangular
Package Code SOP

TLV2785CD sop Pin Yapısı Kılavuzu

TLV2785CD (sop paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

sop paket pin çizelgesi için TLV2785CD

Ayrıntılı pin çıkış verisi mevcut değil: TLV2785CD.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

TLV2785CD için uygundur 6 uygulamas: Low-Voltage Sensor Signal Conditioning, Portable Data Acquisition, Industrial Analog Interface, Portable Measurement Equipment, Low-Voltage Buffering and Level Conditioning, Battery-Powered Analog Control.

🏭

Low-Voltage Sensor Signal Conditioning

The TLV2785CD is suitable for conditioning several low-level sensor outputs within a 3.6 V system because its four amplifier channels support rail-to-rail input and output operation. Each channel can provide buffering or gain around the sensor while the 8 MHz gain-bandwidth product handles moderate-bandwidth signals. This arrangement reduces the number of amplifier packages on a multi-sensor measurement board. Before finalizing the circuit, verify the sensor output range, required gain, input offset, noise, and settling behavior against the manufacturer electrical characteristics. Keep the input source impedance and feedback network consistent with the application, and route sensitive sensor traces away from switching nodes.

📱

Portable Data Acquisition

The four-channel TLV2785CD can support compact data-acquisition designs that need to amplify or buffer several analog inputs near a 3.6 V supply rail. Rail-to-rail operation improves signal utilization in portable equipment, while the 8 MHz gain-bandwidth product provides useful bandwidth for moderately fast sensor and control signals. Shutdown capability can also help manage power when acquisition is intermittent. The complete input range, common-mode behavior, output swing, and settling requirements must be checked against the intended sample rate. PCB planning should place bypass capacitors near the supply pins and provide a low-impedance return path for each measured channel.

🏭

Industrial Analog Interface

The TLV2785CD can be used in industrial interface circuitry when several low-voltage signals must be conditioned in a compact surface-mount design. Its quad-channel organization supports parallel input stages, current-to-voltage conversion, threshold amplification, or general-purpose buffering, while the 3.6 V nominal supply suits modern embedded control systems. The 8 MHz bandwidth is appropriate for signals substantially faster than static sensor levels but does not by itself establish precision performance. Evaluate offset voltage, input bias current, noise, slew rate, output drive, and operating-temperature limits in the final analog path. Protection networks should be designed separately so they do not degrade amplifier stability.

🔧

Portable Measurement Equipment

The TLV2785CD fits portable measurement equipment that needs multiple general-purpose amplifier channels at a 3.6 V operating point. Rail-to-rail input and output stages are useful when instrument front ends operate across much of the available supply range, and the quad package simplifies routing across a compact PCB. Four channels may be allocated to sensor inputs, reference buffering, output drive, or signal conditioning. Because this is a standard general-purpose amplifier rather than a dedicated precision part, applications demanding exceptional DC accuracy should calculate the resulting error budget. The manufacturer datasheet should define the offset, bias-current, noise, and common-mode conditions used for that assessment.

⚡

Low-Voltage Buffering and Level Conditioning

The TLV2785CD can implement unity-gain buffers or modest-gain signal conditioners for systems powered from a 3.6 V rail. Its four channels allow multiple low-voltage nodes to be isolated from higher-impedance loads, and the rail-to-rail output characteristic provides more usable signal range than a conventional amplifier with restricted output swing. The 8 MHz gain-bandwidth product leaves bandwidth margin for many general-purpose conditioning stages. Check capacitive-load stability and output-current limits before driving long cables or large input capacitances. Maintain sensible feedback resistors and keep the amplifier input common-mode voltage inside the manufacturer-specified operating region.

🔋

Battery-Powered Analog Control

The TLV2785CD is appropriate for battery-powered analog control blocks that operate near a 3.6 V rail and need four low-power-capable amplifier functions in one package. Rail-to-rail input and output behavior helps process control signals without requiring a higher supply voltage, while shutdown provides a mechanism to control consumption during inactive operating states. The designer should still confirm quiescent current, shutdown current, and timing from the manufacturer data before estimating battery life. Avoid floating shutdown and unused-channel inputs, place supply decoupling close to the device, and account for the common-mode range at battery-discharge voltages. These measures prevent unintended current draw or saturation during power transitions.

What is the TLV2785CD?
The TLV2785CD is a Texas Instruments quad operational amplifier with rail-to-rail input and output stages, shutdown support, a 3.6 V nominal supply, and an 8 MHz gain-bandwidth product. According to the manufacturer product page, the TLV2785 is a four-channel, 3.6 V, 8 MHz operational amplifier family intended for low-voltage analog systems where multiple amplifier channels and controlled shutdown are useful.
How many amplifier channels does the TLV2785CD have?
The TLV2785CD contains four operational-amplifier circuits in one package. Texas Instruments describes the TLV2785 as a quad amplifier, and the distributor catalog listing also identifies TLV2785CD as a four-circuit device. This makes it suitable for buffering or conditioning four independent analog signals without requiring four separate amplifier packages.
What is the gain-bandwidth product of the TLV2785CD?
The TLV2785CD has an 8 MHz gain-bandwidth product. The manufacturer describes the TLV2785 family as an 8 MHz, high-speed operational amplifier for low-voltage operation. This bandwidth is suitable for moderate-speed signal conditioning and analog buffering, while precision applications requiring exceptionally low offset or drift should use a device optimized for those parameters.
What supply voltage is used by the TLV2785CD?
The TLV2785CD is identified as a 3.6 V operational amplifier family. The manufacturer product page specifically describes the TLV2785 as a 3.6 V device with shutdown. Because the exact minimum and maximum supply limits are listed under device-specific conditions, consult the official datasheet before operating the amplifier near a rail or outside its documented voltage range.
What does rail-to-rail input and output mean for the TLV2785CD?
Rail-to-rail input and output operation means the TLV2785CD can accept and produce signal levels extending toward the positive and negative supply rails. This is especially useful in a 3.6 V system where a conventional amplifier may lose usable input range or output swing near the rails. Actual signal limits and output-load behavior should be read from the manufacturer datasheet test conditions.
Where can I download the TLV2785CD datasheet PDF?
The official TLV2785 documentation is available through the Texas Instruments product page at https://www.ti.com/product/TLV2785. From that page, open the TLV2785 technical documentation and select the datasheet for the appropriate ordering code and package. The TLV2785CD datasheet provides the authoritative pin assignment, electrical limits, test conditions, and application information for the commercial-grade device.
Where can I find the TLV2785CD pinout?
The TLV2785CD pinout is shown in the pin-configuration section of the Texas Instruments TLV2785 datasheet. Use that diagram rather than relying on the package family alone because shutdown pins, supply pins, and individual amplifier channels must be assigned exactly as documented. The ordering table on the manufacturer product page identifies the package associated with the TLV2785CD ordering code.
What can replace the TLV2785CD?
A valid replacement for the TLV2785CD must match its package footprint, pin assignment, supply range, shutdown behavior, bandwidth, input/output range, and electrical limits. Texas Instruments provides an official cross-reference search for evaluating equivalent devices, but a device sharing the same amplifier count is not automatically a drop-in replacement. Request a formal replacement review before changing a released PCB design.
Is the TLV2785CD suitable for sensor signal conditioning?
The TLV2785CD is suitable for many low-voltage sensor signal-conditioning tasks because it provides four rail-to-rail amplifier channels, an 8 MHz gain-bandwidth product, and operation from a 3.6 V nominal supply. The practical choice depends on sensor output range, required gain, noise, offset, settling time, and shutdown timing. Those operating requirements should be compared with the manufacturer electrical characteristics.
TLV2785CD versus TLV2784CD: which one should I choose?
The TLV2785CD is the quad member of the family, while the TLV2784CD is the dual member. The TLV2785CD therefore provides four amplifier channels where the TLV2784CD provides two. Both use the same broader low-voltage, high-speed rail-to-rail amplifier family concept, but they are not interchangeable when channel count or package pin assignment differs.
TLV2785CD versus TLV2785CDR: can one replace the other?
TLV2785CD and TLV2785CDR identify the same device family with different orderable packaging or delivery formats. The commercial-grade electrical function remains the defining factor, while the suffix affects how the device is packaged for manufacturing or shipment. Confirm reel dimensions, orientation, moisture handling, and BOM procurement requirements before treating one ordering code as a production substitute.
When should I choose the TLV2785CD instead of a precision amplifier?
Choose the TLV2785CD when the design needs four low-voltage, rail-to-rail channels with an 8 MHz gain-bandwidth product and when moderate speed is more important than exceptionally low offset or drift. Choose a precision amplifier when sensor calibration, high DC accuracy, low input bias current, or low drift dominates the application. The two device categories optimize different error mechanisms.
Does the TLV2785CD require a shutdown pin connection?
The TLV2785CD belongs to a family with shutdown, so the design must account for the documented shutdown-control behavior. Do not leave a shutdown-related terminal uncontrolled if it can affect the device state. Use the manufacturer pin configuration and recommended application information to determine the correct active state, pull arrangement, sequencing, and relationship between shutdown control and each amplifier channel.
Where can I buy the TLV2785CD and check current availability?
Use the Request a Quote form on this page to request current TLV2785CD availability, unit pricing, order quantity, and lead time. The form connects the request to XAIPART without embedding a stale price or stock statement. For production planning, also confirm the package, commercial temperature grade, delivery format, and lifecycle status before releasing the purchase order.
What is the lead time for the TLV2785CD?
The current lead time for TLV2785CD should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, package format, manufacturing schedule, and supply conditions, so a historical figure is not a reliable production commitment. Include the required quantity, target delivery date, and acceptable commercial terms in the request.
What are the key specifications of the TLV2785CD that engineers should know?
The principal TLV2785CD specifications are four amplifier circuits, rail-to-rail input and output operation, a 3.6 V nominal supply, an 8 MHz gain-bandwidth product, shutdown support, and a surface-mount SOIC package. Texas Instruments identifies the device as a standard general-purpose amplifier. Exact supply limits, offset, bias current, slew rate, thermal limits, and pin assignments must be taken from the manufacturer datasheet.

Mühendislik referans verileri: TLV2785CD — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the TLV2785CD for compact, low-voltage analog designs that require four general-purpose amplifier channels, rail-to-rail input and output operation, shutdown control, and an 8 MHz gain-bandwidth product. It is particularly appropriate when several sensor, buffer, or interface signals must share a 3.6 V supply architecture. Select a dual amplifier instead when only two independent channels are needed, or select a precision amplifier when DC offset, drift, bias current, or noise dominates the accuracy budget. Before approving any substitute, confirm the complete pin assignment, package dimensions, supply range, common-mode behavior, output swing, shutdown logic, and thermal limits. A matching amplifier count or package family alone is not sufficient to establish drop-in compatibility.

Tasarım Notları

Place the required supply-bypass capacitors immediately adjacent to the TLV2785CD supply and ground pins, with the shortest possible return path through the ground plane. This quad amplifier combines four channels in one package, so shared supply impedance can couple activity between channels. Confirm the required capacitance and permitted ceramic type from the manufacturer datasheet, and validate the supply network across the full 3.6 V operating range.

Route sensitive inputs, feedback connections, and outputs away from switching-power nodes and high-current return paths. Keep each amplifier's feedback components close to its channel pins to minimize parasitic feedback and instability. For long high-impedance inputs, use guarding or a driven shield where appropriate. The 8 MHz bandwidth makes compact, controlled routing important even when the signal itself changes slowly.

Do not treat the 3.6 V value as the exact allowable supply range. Check minimum and maximum supply voltage, input common-mode limits, output swing, and shutdown-state requirements in the official datasheet. Also verify that every unused amplifier input is connected to a defined valid state and that shutdown control cannot float. These checks prevent the most common failures in compact low-voltage analog circuits.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance declarations must be confirmed for the exact TLV2785CD ordering code using the manufacturer product page and current quality documentation.

İlgili Aramalar

TLV2785CD datasheet TLV2785CD pinout TLV2785CD datasheet pdf TLV2785CD equivalent TLV2785CD replacement TLV2785CD drop-in replacement TLV2785CD cross reference TLV2785CD vs TLV2784CD TLV2785CD application circuit Texas Instruments TLV2785CD TLV2785CD price TLV2785CD stock

İlgili Bileşenler ve Terimler

Texas Instruments TLV2785CD TLV2785 TLV2784CD TLV2785CDR TLV2785IN operational amplifier quad operational amplifier low-voltage amplifier rail-to-rail input rail-to-rail output shutdown function gain-bandwidth product 3.6 V supply 8 MHz bandwidth signal conditioning sensor interface data acquisition surface-mount package SOIC package semiconductor analog integrated circuit
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle