USB2241-AEZG-05 - USB 2.0 Flash Media Controller | Microchip
MPN: USB2241-AEZG-05 ✓ AktifUSB2241-AEZG-05 Genel Bakış
A flash media controller is a specialized interface IC that manages communication between a USB host and removable or embedded flash storage. It belongs to the broader hierarchy of USB interface controllers, peripheral controllers, interface ICs, and semiconductors. Unlike a general-purpose USB-to-serial bridge, the USB2241 family is designed around the requirements of flash media cards, including card detection, data transfer, and media-format support.
The principal advantages of the USB2241-AEZG-05 include USB 2.0 operation, a 36-QFN-EP surface-mount package, a 3 V to 3.6 V operating supply range, and a parallel host interface. The 6 mm by 6 mm package allows compact implementation in portable readers, embedded media systems, and industrial data-acquisition equipment. The -05 ordering suffix identifies this exact manufacturer configuration and should be retained when sourcing a replacement.
Microchip positions the USB2241 as an ultra-fast controller for multi-format flash media. Its internal role is to translate host-side USB transactions into the appropriate command and data protocol for supported flash media. Compared with placing storage-control logic directly in a system controller, the dedicated USB2241 can simplify the host-side software model while providing a defined interface between USB connectivity and flash-card storage.
Typical applications include USB card readers, portable media accessories, embedded storage systems, industrial data loggers, and equipment that transfers files through removable flash media. It is particularly relevant to compact designs where a dedicated USB-to-flash-media interface is preferable to using a general-purpose host controller for card protocol management.
Designers should preserve the recommended supply-decoupling network, route USB differential pairs as a controlled impedance pair, and verify exposed-pad thermal performance in the final PCB stack-up. The 3 V to 3.6 V supply range also requires attention to source voltage tolerance, startup sequencing, and the voltage required by the attached flash media.
This page organizes the controller's electrical and package information, compares related USB2241-family devices, and provides practical application and design guidance. It also distinguishes exact ordering variants from broader USB2241 references so engineers can evaluate PCB reuse without overlooking media-support or qualification differences.
Drop-in alternatifler için USB2241-AEZG-05 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller USB2241-AEZG-05 (aynı form faktörü ve ayağa oturma) — farklı olan Supported Media, USB Speed, Controller Type, Maximum Sustained Transfer Rate, Package.
USB2241I-AEZG-05
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
USB2241-AEZG-XX
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
USB2240-AEZG-06
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →USB2244-AEZG-06
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →USB2244-AEZG-05
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →USB2241-AEZG-05 Özellikler
| Controller Type | USB 2.0 Controller |
| Arayüz | Parallel |
| Supply Voltage Range | 3 V to 3.6 V |
| Typical Supply Current | 135 mA |
| USB Speed | USB 2.0 |
| Product Function | USB2.0 Multi-Format Flash Media Controller |
| Paket | 36-QFN-EP (6 mm x 6 mm) |
| Total Pins | 36 pins |
| Exposed Pad | Present |
| Montaj Türü | Surface Mount |
USB2241-AEZG-05 36-qfn-ep (6 mm x 6 mm) Pin Yapısı Kılavuzu
USB2241-AEZG-05 (36-qfn-ep (6 mm x 6 mm) paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: USB2241-AEZG-05.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
USB2241-AEZG-05 için uygundur 6 uygulamas: USB Flash Card Reader, Portable Media Accessory, Embedded Flash Storage Bridge, Industrial Data Logger, Portable Test and Measurement Unit, Secure Data Transfer Appliance.
USB Flash Card Reader
The USB2241-AEZG-05 fits a compact USB card-reader design that connects a USB host to compatible flash media. According to the Microchip manufacturer datasheet, it is a USB2.0 Multi-Format Flash Media Controller with a parallel interface, a 3 V to 3.6 V supply range, and a typical supply current of 135 mA. Place it between the USB connector and media interface, provide local supply bypassing, and verify that the required card formats are supported. Its 36-QFN-EP 6 mm by 6 mm package also leaves room for connector, card-socket, and protection components in portable enclosures.
Önerilen
Portable Media Accessory
The USB2241-AEZG-05 is appropriate for a portable media accessory that transfers files between flash storage and a USB host. Its USB 2.0 architecture and parallel controller interface provide a dedicated path for supported flash-media transactions without requiring the application processor to implement every card protocol. According to the Microchip manufacturer datasheet, the device operates from 3 V to 3.6 V and draws 135 mA typically. Designers should budget regulator headroom, implement card insertion and power-control behavior, and verify connector enumeration timing against the target USB host.
Önerilen
Embedded Flash Storage Bridge
The USB2241-AEZG-05 can serve as a dedicated interface between a USB host and compatible embedded flash media. Its parallel interface and multi-format media-controller role separate storage command handling from the primary application processor, which can simplify firmware partitioning and host-driver behavior. According to the Microchip manufacturer datasheet, the controller supports USB 2.0 operation from a 3 V to 3.6 V supply. For an embedded implementation, confirm the exact media family, timing requirements, reset behavior, and exposed-pad layout before committing the controller to a new PCB.
Önerilen
Industrial Data Logger
The USB2241-AEZG-05 is suitable for an industrial data logger that exports records through USB-connected flash media. A dedicated flash media controller allows the logger's main processor to concentrate on acquisition and storage management while USB transfer and media-interface transactions are handled by the USB2241. According to the Microchip manufacturer datasheet, the controller operates at 3 V to 3.6 V with 135 mA typical supply current. Deployment planning should include media-format compatibility, transient protection, supply sequencing, thermal verification, and a controlled qualification process for the intended operating environment.
Önerilen
Portable Test and Measurement Unit
The USB2241-AEZG-05 can support a portable test-and-measurement instrument that stores captured data on flash media and transfers it to a host computer over USB. Its dedicated USB 2.0 flash-media-controller function is useful when the instrument's main processor must handle measurement tasks without directly managing card transactions. According to the Microchip manufacturer datasheet, the controller uses a 36-QFN-EP package and accepts a 3 V to 3.6 V supply. Validate file-system behavior, media endurance assumptions, cable compatibility, and enumeration timing as part of system-level testing.
Önerilen
Secure Data Transfer Appliance
The USB2241-AEZG-05 may be integrated into a secure data-transfer appliance that moves files between host systems and removable flash media. The dedicated controller architecture provides a defined USB-to-flash-media boundary, while the parallel interface allows the system processor to coordinate data flow and device control. According to the Microchip manufacturer datasheet, the device operates from 3 V to 3.6 V and typically consumes 135 mA. Security-focused designs should add appropriate media sanitization, access control, power-state isolation, and verified support for every media type the appliance intends to accept.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: USB2241-AEZG-05 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | USB2241I-AEZG-05 | USB2241-AEZG-XX | USB2240-AEZG-06 | USB2244-AEZG-06 | USB2244-AEZG-05 |
|---|---|---|---|---|---|---|
| Package | 36-QFN-EP (6 mm x 6 mm) | 36-QFN-EP (6 mm x 6 mm) | 36-QFN-EP (6 mm x 6 mm) | 36-QFN-EP (6 mm x 6 mm) | 36-QFN-EP (6 mm x 6 mm) | 36-QFN-EP (6 mm x 6 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Controller Type | USB 2.0 Controller | USB 2.0 Controller | USB 2.0 Controller | USB 2.0 Controller | USB 2.0 Controller | USB 2.0 Controller |
| Ordering Configuration | -05 | I -05 | -XX | -06 | -06 | -05 |
| Pricing | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote |
Ana Farklılayıcılar
- Exact USB2241 family configuration with parallel host interface (karşılaştırma:USB2241I-AEZG-05)
- Same 36-pin controller footprint across related variants (karşılaştırma:USB2240-AEZG-06)
- Targeted choice between USB2241 and USB2244 media-device sets (karşılaştırma:USB2244-AEZG-05)
Tasarım Notları
Route the USB high-speed differential pair as a controlled-impedance pair with continuous reference-plane support, minimized vias, and no unnecessary stubs. Place controller-side USB and flash-media interface components according to the manufacturer reference layout, and keep switching or high-current paths away from the exposed-pad and sensitive interface area. PCB stack-up, connector geometry, and trace spacing must be evaluated together because USB 2.0 signal integrity depends on the complete interconnect.
Design the 3 V to 3.6 V supply rail with transient margin and verify startup behavior for the attached media and USB connector. The USB2241-AEZG-05 has a typical supply current of 135 mA, but connector inrush, media-socket power, regulator tolerance, and peripheral loads must also be included in the system budget. Place decoupling capacitance close to the controller supply pins and provide a low-impedance path from the exposed thermal pad to the appropriate ground or power reference shown in the manufacturer layout guidance.
Do not treat every USB2241-family suffix as an automatic substitution. USB2241I-AEZG-05, USB2241-AEZG-XX, USB2240-AEZG-06, and the USB2244 variants may differ in environmental qualification, media support, or configuration. Before releasing a replacement, compare the manufacturer pin table, supported-device list, electrical limits, timing characteristics, package drawing, and exposed-pad connection against the original design.
The 36-QFN-EP package relies on its exposed pad and PCB copper for heat spreading. Follow the manufacturer land-pattern dimensions and use the package thermal information to estimate junction temperature for the actual supply voltage and loading. Avoid placing the package directly beneath a heat-generating component or enclosure wall unless airflow and copper spreading have been evaluated. Thermal performance depends on the final board area, copper layers, via arrangement, and enclosure, so validate the assembled design.
Uyumluluk Bilgisi
Compliance declarations for the exact USB2241-AEZG-05 ordering option must be confirmed through Microchip's current product documentation or declaration records.