VSC8514XMK-10 - Quad-Port Gigabit Ethernet PHY | Microchip
MPN: VSC8514XMK-10 ✓ AktifVSC8514XMK-10 Genel Bakış
An Ethernet PHY is the physical-layer interface between a network controller or MAC and copper cabling. Within the product hierarchy, a PHY is an Ethernet interface IC, a network interface device, and a semiconductor that converts logical data into electrical signaling suitable for 10BASE-T, 100BASE-TX, or 1000BASE-T transmission. This position makes the VSC8514XMK-10 relevant wherever several network connections must share one Ethernet switching or aggregation platform.
The principal feature is four-port integration in one package. Each channel supports copper Ethernet speeds of 10 Mb/s, 100 Mb/s, and 1000 Mb/s, allowing the device to accommodate endpoint, access, backhaul, and enterprise equipment. Multi-channel integration reduces the number of physical-layer devices required in a quad-port design. Link-status monitoring provides a mechanism for observing individual copper links, while the device's stated operating range of -40°C to +110°C supports demanding industrial and telecommunications environments.
The VSC8514 family is designed for energy-efficient broadband gateways, data centers, enterprise networks, wireless base stations, and carrier equipment. Its architecture also supports TDM backhaul and packet-oriented Ethernet operation, allowing one PHY to address both legacy time-division-multiplexed infrastructure and modern packet networks. The manufacturer documentation describes support for copper Cat5 media and an Ethernet packet generator that can isolate faults between a MAC, the VSC8514, a locally connected PHY, or the remote link partner.
Because this is a 138-lead QFN package, PCB design must follow the manufacturer's land pattern, exposed-pad requirements, and high-speed routing guidance. The four differential copper channels demand controlled impedance, continuous return paths, careful separation between port pairs, and compliant magnetics or cable-side network interfaces. Power and thermal design should also account for the aggregate demand of four active PHYs rather than evaluating one port in isolation.
For production designs, use the manufacturer datasheet and package drawings to assign every signal, place input and output decoupling close to the device, and validate the complete board with the manufacturer's Ethernet packet generator procedure. This page combines the verified VSC8514 family specifications, ordering alternatives, application guidance, and board-level design considerations needed to evaluate the VSC8514XMK-10 for a new multiport Ethernet design.
Drop-in alternatifler için VSC8514XMK-10 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller VSC8514XMK-10 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Operating Temperature Range, Power Management, Product Type, Synchronous Ethernet.
VSC8514XMK-03
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →VSC8514XMK-11
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
VSC8514XMK-14
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →VSC8514XMK
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →VSC8514XMK-10 Özellikler
| Product Type | Quad-port Gigabit Ethernet physical-layer transceiver |
| Number of Ports | 4 ports |
| Supported Copper Ethernet Speeds | 10 Mb/s, 100 Mb/s, and 1000 Mb/s |
| Supported Physical Media | 10/100/1000BASE-T copper Cat5 media |
| Besleme Gerilimi | 3.3 V |
| İşletim Sıcaklığı Aralığı | -40°C to +110°C |
| Package Type | 138-pin QFN |
| Package Dimensions | 12 mm × 12 mm |
| Package Code | XMK |
| Exposed Thermal Pad | Present |
| Channel Integration | 4 integrated copper PHY channels |
| Link Monitoring | Link-status monitoring |
| Energy-Efficient Features | IEEE 802.3as Energy Efficient Ethernet |
| Carrier Features | TDM backhaul support |
| Diagnostic Feature | Ethernet packet generator for link and MAC isolation testing |
| Synchronous Design | Synchronous Ethernet PHY architecture |
VSC8514XMK-10 xmk Pin Yapısı Kılavuzu
VSC8514XMK-10 (xmk paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: VSC8514XMK-10.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
VSC8514XMK-10 için uygundur 6 uygulamas: Enterprise Network Access, Broadband Gateway, Wireless Base Station, Industrial Network Gateway, Ethernet Test Equipment, Data Center Edge Equipment.
Enterprise Network Access
The VSC8514XMK-10 fits enterprise access equipment requiring four copper Gigabit Ethernet ports in one device. Its integrated 10/100/1000BASE-T channels reduce the number of discrete PHY packages, while each channel can negotiate 10, 100, or 1000 Mb/s as required by connected endpoints. Link-status monitoring supports rapid detection of inactive ports in managed switches, gateways, and IP network appliances. The 3.3 V supply and -40°C to +110°C operating range suit industrial and networking environments where temperature and reliability requirements exceed typical office conditions.
Önerilen
Broadband Gateway
A broadband gateway can use the VSC8514XMK-10 to provide four Gigabit Ethernet network-facing ports for service equipment, Wi-Fi systems, or home gateways. Supporting all three copper Ethernet rates allows one PHY design to serve legacy 10 Mb/s equipment, Fast Ethernet management ports, and modern gigabit endpoints. Multi-channel integration reduces PCB area compared with four separate one-port devices, while low-power operation is valuable in continuously deployed access products. TDM backhaul support also allows the device to participate in carrier networks that combine packet traffic with time-division-multiplexed infrastructure.
Önerilen
Wireless Base Station
The VSC8514XMK-10 is suitable for wireless base-station backhaul equipment that needs multiple high-speed copper Ethernet connections near the radio-processing hardware. Four integrated Gigabit PHY channels can connect baseband units, monitoring systems, or aggregation equipment without requiring four separate PHY packages. The broad operating range of -40°C to +110°C supports temperature-controlled telecommunications installations. Carrier-oriented features, including TDM backhaul and link-status monitoring, make the device relevant to both packet-based and legacy transport environments, subject to the exact interface and qualification requirements of the target station.
Önerilen
Industrial Network Gateway
Industrial gateways can consolidate four copper Ethernet links into a single PHY device when they need connectivity to programmable controllers, sensors, cameras, and service equipment. The VSC8514XMK-10 supports 10/100/1000BASE-T, which covers both low-bandwidth field devices and gigabit machine-vision traffic. Its stated -40°C to +110°C range is valuable in factories, outdoor enclosures, and thermally variable control cabinets. Link monitoring assists health reporting, while integration reduces component count and simplifies synchronization across four channels compared with four independent PHY implementations.
Önerilen
Ethernet Test Equipment
The VSC8514XMK-10 can support Ethernet test and diagnostic equipment because its integrated Ethernet packet generator can isolate problems at 10, 100, and 1000 Mb/s over copper Cat5 media. The generator helps engineers distinguish a MAC-to-PHY fault, a local PHY fault, or a remote link-partner problem. Four integrated channels also permit parallel testing or multiport monitoring within a compact instrument. The 138-pin QFN package demands careful high-speed layout, but the diagnostic capability reduces the need for separate packet-generation hardware when building port-analysis or line-conditioning systems.
Önerilen
Data Center Edge Equipment
The VSC8514XMK-10 is applicable to data-center edge systems, top-of-rack modules, and low-latency aggregation equipment that expose several copper Ethernet ports. Its four 10/100/1000BASE-T channels provide a compact interface for servers, storage controllers, and management networks while retaining compatibility with slower legacy devices. Low-power operation is valuable when the module remains powered continuously, and the wide temperature range supports controlled data-center environments. The synchronous PHY architecture and common package simplify multiport clocking and board planning when the host controller is designed around the manufacturer's supported interface configuration.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: VSC8514XMK-10 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | VSC8514XMK-03 | VSC8514XMK-11 | VSC8514XMK-14 | VSC8514XMK |
|---|---|---|---|---|---|
| Package | 138-pin QFN (12 x 12 mm) | 138-pin QFN (12 x 12 mm) | 138-pin QFN (12 x 12 mm) | 138-pin QFN (12 x 12 mm) | 138-pin QFN (12 x 12 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Port Count | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports |
| Ethernet Speed Support | 10/100/1000BASE-T | 10/100/1000BASE-T | 10/100/1000BASE-T | 10/100/1000BASE-T | 10/100/1000BASE-T |
| Ordering Suffix | -10 | -03 | -11 | -14 | No numeric suffix |
Ana Farklılayıcılar
- Four Gigabit Ethernet channels in one package (karşılaştırma:KSZ8041TLI-TR)
- Broad specified operating temperature range (karşılaştırma:VSC8514XMK-03)
- Integrated diagnostic packet generation (karşılaştırma:KSZ8721BLI-TR)
- Carrier-oriented TDM backhaul support (karşılaştırma:KSZ8895FMQTR)
Tasarım Notları
Implement the 138-pin QFN land pattern exactly as specified by Microchip, including the exposed thermal pad, via pattern, solder-mask geometry, and component placement. Place the device near the four copper-channel sections and their magnetics or network connectors. Keep the exposed-pad thermal interface unobstructed, and follow the manufacturer's layer-stack and via recommendations because a generic 138-QFN footprint may not satisfy return-path, soldering, or thermal requirements.
Route each 10/100/1000BASE-T channel as a controlled-impedance differential pair with a continuous return path and no plane transitions beneath the pair. Match pair geometry and length according to the manufacturer's layout guidance, keep unused copper away from sensitive nets, and separate adjacent port pairs to limit crosstalk. Also preserve the placement and orientation of the external network-interface components specified for copper Cat5 media.
Thermal design should account for four simultaneous copper channels and the complete VSC8514XMK-10 operating state, not merely a single-port average. Estimate package dissipation from the actual supply voltage, enabled-channel count, and board ambient, then size the exposed-pad copper and via array accordingly. Validate the final assembly under worst-case carrier, enterprise, or industrial conditions, and use the manufacturer's maximum operating-temperature limits as the design constraint.
Do not treat the -03, -11, -14, or base XMK ordering designation as automatically interchangeable with -10. Confirm device revision, temperature grade, qualification status, clocking requirements, firmware support, and exposed-pad compatibility in Microchip's ordering documentation. Before production, use the Ethernet packet generator at 10, 100, and 1000 Mb/s to distinguish MAC, local PHY, and remote link-partner faults.
Uyumluluk Bilgisi
The manufacturer datasheet and product-family information were reviewed for functional and package details. Explicit RoHS, REACH, automotive-qualification, lead-free, halogen-free, and conflict-minerals statements are not established, so these fields remain unknown.