WM8985CGEFL Stereo Audio Codec | Cirrus Logic | 32-QFN
MPN: WM8985CGEFL ✓ AktifWM8985CGEFL Genel Bakış
A multimedia codec is an integrated audio interface IC that converts between digital audio streams and analog audio signals while providing control and signal-conditioning functions for speakers, headphones, microphones, and line-level circuitry. The WM8985CGEFL sits within the broader hierarchy of audio codec, audio interface IC, multimedia IC, and semiconductor.
The WM8985CGEFL is identified in distributor listings as a stereo audio interface supporting 24-bit I2S and PCM formats. Its 32-QFN (5x5 mm) package supports high-density PCB layouts and is suitable for portable equipment, consumer audio products, communications equipment, and embedded audio platforms. The listing also identifies Class D headphone-driver support as a key feature for applications requiring efficient headphone amplification.
The 5x5 mm QFN format can help reduce board area compared with larger leaded packages, but exposed-pad thermal management and careful PCB layout remain important. Decoupling capacitors should be placed close to the device power pins, while analog and digital ground and power connections should follow the manufacturer pin-description and layout guidance. Signal-routing decisions should also account for the 24-bit audio path and the separation of analog and digital sections.
Typical uses include USB and embedded audio accessories, portable media equipment, communications terminals, smart-device audio paths, and compact headphone interfaces. A system designer should confirm the complete electrical limits, clocking requirements, supported sample rates, analog input/output limits, and pin-level connections against the manufacturer datasheet before releasing a PCB.
This product page consolidates the exact WM8985CGEFL package and interface information into a structured component record. It also identifies the intended codec use cases and distinguishes the documented part from unsupported substitute claims.
When replacing an existing WM8985CGEFL, verify the complete 32-pin land pattern, exposed-pad connection, digital audio format, clock configuration, analog biasing, and supply sequencing rather than relying on the codec function alone. A functionally similar audio codec is not automatically a pin-to-pin drop-in replacement.
Drop-in alternatifler için WM8985CGEFL — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinWM8985CGEFL Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Stereo audio interface and multimedia codec |
| Manufacturer | Cirrus Logic |
| Digital Audio Resolution | 24 bit |
| Digital Audio Interface | I2S, PCM |
| Channel Configuration | Stereo |
| Headphone Driver | Class D headphone amplifier |
| Paket | 32-QFN (5x5 mm) |
| Montaj Türü | Surface mount |
| Pin Sayısı | 32 pins |
| Manufacturer Product Category | Codecs, Multimedia CODEC |
| Digital Audio Data Format | I2S and PCM |
| Analog Audio Function | Stereo audio signal conversion |
| Output Function | Class D headphone output |
WM8985CGEFL 32-qfn (5x5 mm) Pin Yapısı Kılavuzu
WM8985CGEFL (32-qfn (5x5 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: WM8985CGEFL.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
WM8985CGEFL için uygundur 6 uygulamas: Portable Headphone Audio, USB Audio Accessory, Communications Terminal, Embedded Audio Control Panel, Smart Device Audio Module, Digital Audio Evaluation Platform.
Portable Headphone Audio
The WM8985CGEFL fits portable headphone products that receive 24-bit I2S or PCM digital audio from a host processor. It combines a stereo audio interface with Class D headphone-driver functionality in a 32-QFN (5x5 mm) package, reducing the number of separate audio-path devices and conserving board area. The design should verify the required headphone power, load impedance, analog signal levels, and supply rails against the manufacturer electrical data before selecting passive networks and protection components.
Önerilen
USB Audio Accessory
The WM8985CGEFL is suitable for a compact USB audio accessory in which a digital audio controller streams I2S or PCM data into a stereo codec. Its documented 24-bit digital audio support and integrated headphone-driver function cover the central signal-conversion stage for headphones or line-level output. Layout must keep clock and data traces short, provide local decoupling, and maintain the separation between sensitive analog and digital sections described by the manufacturer.
Önerilen
Communications Terminal
The WM8985CGEFL can support headset-audio monitoring in a communications terminal by accepting a digital PCM or I2S stream and providing stereo conversion with Class D headphone drive. Its 32-QFN (5x5 mm) package supports compact, high-density layouts where board area is constrained. Before implementation, verify speaker or headphone loading, voice-path routing, microphone requirements, echo-cancellation needs, and regulatory limits that may require circuitry beyond the codec.
Önerilen
Embedded Audio Control Panel
The WM8985CGEFL suits an embedded control panel or industrial audio interface that receives serial digital audio from an application processor. The 24-bit I2S or PCM interface provides a clear digital-audio handoff, while the integrated stereo codec and headphone-driver capability can serve local monitoring. Engineers should confirm supported clock rates, master-versus-slave operation, control-interface timing, analog reference requirements, and the exposed-pad layout before beginning PCB implementation.
Önerilen
Smart Device Audio Module
The WM8985CGEFL is appropriate for a smart-device audio module that connects a digital-audio host to compact headphones or an onboard audio output. The 32-QFN package reduces board footprint, while 24-bit I2S and PCM formats allow integration with common embedded audio buses. The design should account for wireless-module interference, microphone and speaker coupling, headroom, pop-noise control, and thermal performance of the headphone stage under sustained maximum-output conditions.
Önerilen
Digital Audio Evaluation Platform
The WM8985CGEFL can serve as the audio codec on a digital-audio evaluation platform driven by an FPGA, MCU, or dedicated USB audio controller. Its documented I2S and PCM support enables repeatable testing of digital streams, conversion paths, and headphone output behavior. Evaluation-board users should preserve the manufacturer's recommended supply, filtering, clocking, and grounding arrangements, and compare measured audio performance against the limits stated in the official datasheet.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: WM8985CGEFL — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Tasarım Notları
Treat the WM8985CGEFL 32-QFN layout as a high-density mixed-signal design. Place power-decoupling capacitors at the pins specified by the manufacturer datasheet, keep analog and digital return paths disciplined, and route the 24-bit I2S or PCM clock and data lines away from sensitive headphone-output nodes. Verify the exposed-pad connection and land pattern against the official package drawing before releasing Gerber files.
Confirm the codec's supported supply rails, headphone-driver operating conditions, power-up sequence, and load impedance before selecting the headphone path. The presence of a Class D driver does not by itself establish suitability for every headset, and analog and digital supplies may have different sequencing or filtering requirements. Use the manufacturer electrical characteristics as the controlling reference for rail tolerances and decoupling values.
Do not substitute a generic stereo codec merely because both devices use a QFN package. Pin compatibility requires matching land geometry, exposed-pad behavior, power pins, control signals, clock inputs, analog functions, and headphone-output capabilities. If continuity or supply sequencing differs, the replacement requires schematic and PCB review even when its advertised resolution and interface format appear equivalent.
Uyumluluk Bilgisi
Compliance status is not stated in the component records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification requirements with Cirrus Logic or the current manufacturer documentation.
