XC4VFX40-10FF672C - 41,904-Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX40-10FF672C ✗ Son Kullanım ZamanıXC4VFX40-10FF672C Genel Bakış
An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior are defined by a configuration bitstream after fabrication. Unlike a fixed-function ASIC, an FPGA allows field upgrades, shorter development cycles, and reusable hardware platforms. The Virtex-4 FX family combines configurable logic blocks, dedicated arithmetic resources, block RAM, and selectable I/O standards in a single package. This makes the XC4VFX40 useful when design flexibility and parallel processing matter more than the unit cost of a custom ASIC.
The XC4VFX40-10FF672C provides 41,904 logic cells organized into 4,656 configurable logic blocks. Published device information identifies 352 inputs and 352 outputs, a maximum clock frequency of 1028 MHz, and a nominal internal supply of 1.2 V. The -10 designation identifies its speed grade, while the FF672 suffix identifies the 672-ball FCBGA configuration. The device is configured through its configuration architecture and then operates as parallel programmable logic rather than as a conventional fixed-function controller.
The principal design consideration is that peak clock capability does not guarantee that every design will close at the same frequency. Timing closure depends on the selected clocking architecture, interconnect demand, memory use, I/O standards, speed grade, and board-level constraints. Pin assignments, differential pairs, power rails, configuration pins, and decoupling requirements must be implemented according to the package and pinout documentation. Because the exact package pin map is not published in the indexed material, engineers should use the official pinout table before assigning a 672-ball PCB.
Typical applications include telecommunications line cards, industrial automation controllers, high-speed data acquisition, network packet processing, storage interfaces, and instrumentation. In a parallel filter, the FPGA's configurable logic blocks can implement multiple arithmetic pipelines concurrently, while block RAM can retain samples or lookup data. In communications equipment, selectable I/O and dedicated resources can support high-throughput data paths while retaining the ability to update the bitstream during product maintenance.
Power and signal integrity are critical in a 672-ball FCBGA implementation. Follow the manufacturer's recommended power-supply topology and decoupling network, provide a low-impedance reference plane, and keep sensitive configuration and clock routing away from high-slew-rate outputs. Validate BGA assembly, X-ray inspection, and thermal behavior early in the hardware schedule because package complexity can outweigh logic-design effort.
This product record combines the exact orderable MPN, package and resource identifiers, family-level technical characteristics, drop-in family variants, application guidance, and design checks. It is structured to help procurement and engineering teams qualify the Virtex-4 FX device while keeping unresolved electrical and pin-level values explicit rather than estimated.
Drop-in alternatifler için XC4VFX40-10FF672C — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC4VFX40-10FF672C (aynı form faktörü ve ayağa oturma) — farklı olan Device Type.
XC4VFX40-10FF672I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC4VFX40-10FFG672C
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XC4VFX40-10FFG672I
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XC4VFX40-10FF672IS1
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XC4VFX40-10FFG672IS1
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XC4VFX40-10FF672C Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Virtex-4 FX field-programmable gate array (FPGA) |
| Logic Cells | 41,904 cells |
| Configurable Logic Blocks | 4,656 CLBs |
| Azami Saat Hızı | 1028 MHz |
| Input Count | 352 inputs |
| Output Count | 352 outputs |
| Process Technology | 90 nm CMOS |
| Internal Supply Voltage | 1.2 V |
| Speed Grade | -10 |
| Paket | 672-ball FCBGA, 27 mm x 27 mm |
| Device Family | Virtex-4 FX |
| Programmable Logic | 41,904 logic cells |
| Montaj Türü | Surface-mount BGA |
XC4VFX40-10FF672C 672-ball fcbga, 27 mm x 27 mm Pin Yapısı Kılavuzu
XC4VFX40-10FF672C (672-ball fcbga, 27 mm x 27 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC4VFX40-10FF672C.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC4VFX40-10FF672C için uygundur 6 uygulamas: Telecommunications Line Cards, Industrial Automation Controllers, High-Speed Data Acquisition, Network Packet Processing, Instrumentation and Test Systems, Storage and Interface Aggregation.
Telecommunications Line Cards
The XC4VFX40-10FF672C is well suited to parallel telecom line-card functions because its 41,904 logic cells and 4,656 CLBs can support packet classification, framing, buffering control, and interface adaptation in configurable hardware. The -10 speed grade provides a strong starting point for timing-sensitive designs, while the 672-ball FCBGA supports dense, high-speed interconnect routing on a multilayer PCB. Engineers should allocate 352 inputs and 352 outputs according to the selected interfaces and preserve the manufacturer-recommended power and decoupling layout. If the equipment must operate in an extended industrial temperature range, qualify the XC4VFX40-10FF672I suffix instead.
Önerilen
Industrial Automation Controllers
The XC4VFX40-10FF672C can consolidate deterministic control, sequencing, protocol conversion, and condition monitoring into one Virtex-4 FX implementation. Its 41,904 logic cells allow multiple parallel pipelines to operate without the fixed instruction sequence of a microcontroller, and the 90 nm CMOS device provides a substantial programmable-logic budget for demanding industrial controllers. The commercial C suffix should be used only when the specified ambient range supports it; otherwise, the 672-ball XC4VFX40-10FF672I provides the appropriate industrial ordering option. PCB implementation must preserve clean power distribution and controlled impedance for any high-speed industrial fieldbus or backplane links.
Önerilen
High-Speed Data Acquisition
For parallel data-acquisition systems, the XC4VFX40-10FF672C can implement sampling pipelines, digital filters, correlation, decimation, and buffer-management logic across its 41,904 programmable cells. The 4,656-CLB organization provides substantial parallelism for simultaneous channels, while the 1.2 V internal supply and published 1028 MHz maximum clock capability support high-speed timing architectures. Actual sample rate and channel count depend on I/O standards, data width, memory resources, and timing closure. Use the official device tables to configure dedicated block RAM and DSP resources, and prototype the acquisition interface early because 672-ball assembly and power delivery can limit practical throughput.
Önerilen
Network Packet Processing
The XC4VFX40-10FF672C can implement parallel packet classification, lookup, filtering, queue management, and traffic statistics without implementing a complete processor for every operation. Its 41,904 logic cells permit dedicated pipelines to operate concurrently, and the -10 speed grade is appropriate for timing-critical network datapaths. The 672-ball FCBGA provides enough physical connectivity for parallel buses, high-speed serial I/O, and on-board memory interfaces when the PCB stack-up is designed accordingly. For products requiring a broader environmental guarantee, evaluate the industrial XC4VFX40-10FF672I. Any alternative FPGA should be checked for memory-interface compatibility, bitstream requirements, and congestion risk.
Önerilen
Instrumentation and Test Systems
Instrumentation products benefit from the XC4VFX40-10FF672C's combination of parallel programmable logic, 4,656 CLBs, and a 1.2 V architecture for waveform generation, digital pattern execution, trigger logic, and real-time signal conditioning. Designers can build configurable measurement pipelines that adapt through firmware updates instead of requiring a new ASIC for every instrument revision. The -10 speed grade helps timing closure for high-rate test paths, although routing congestion and external memory timing may ultimately determine performance. Use the official I/O specifications to select standards such as LVDS or differential clocking, and design the BGA package with low-impedance planes and disciplined return paths.
Önerilen
Storage and Interface Aggregation
The XC4VFX40-10FF672C can act as a flexible aggregation engine between storage controllers, memory devices, and data-processing pipelines. Its 41,904 logic cells allow multiple data paths, command decoders, buffers, and error-handling functions to coexist, while the 672-ball package supports the pin density required by wide interfaces. Designers can implement protocol-specific storage controllers or adapt legacy buses to newer host interfaces, then update functionality through configuration changes. The main engineering tradeoffs are BGA assembly cost, power integrity, and timing closure across memory interfaces. Validate eye characteristics, package stack-up, and thermal performance before production release, especially for sustained transfer workloads.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC4VFX40-10FF672C — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC4VFX40-10FF672I | XC4VFX40-10FFG672C | XC4VFX40-10FFG672I | XC4VFX40-10FF672IS1 | XC4VFX40-10FFG672IS1 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA | 672-ball FCBGA | 672-ball FCBGA | 672-ball FCBGA | 672-ball FCBGA |
| Logic Cells | 41,904 cells | 41,904 cells | 41,904 cells | 41,904 cells | 41,904 cells | 41,904 cells |
| Configurable Logic Blocks | 4,656 CLBs | 4,656 CLBs | 4,656 CLBs | 4,656 CLBs | 4,656 CLBs | 4,656 CLBs |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Internal Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -10 | -10 | -10 | -10 | -10 | -10 |
| Temperature Grade | Commercial C suffix | Industrial I suffix | Commercial C suffix | Industrial I suffix | Industrial I suffix | Industrial I suffix |
Ana Farklılayıcılar
- Directly matches the established XC4VFX40 device architecture (karşılaştırma:XC4VFX60-10FF672C)
- Commercial-temperature ordering option preserves the core -10 device ratings (karşılaştırma:XC4VFX40-10FF672I)
- Matches the 352-input and 352-output resource profile of the I-suffix variant (karşılaştırma:XC4VFX40-10FF672I)
Tasarım Notları
Implement the manufacturer's recommended power rails and decoupling network directly beneath the 672-ball device. The 1.2 V figure describes the internal supply and should not be used as the complete board-power requirement. Estimate static and dynamic consumption from the actual configuration, clock activity, I/O loading, and voltage. Separate noisy supplies from sensitive bias rails where practical, and test power sequencing before configuration because incorrect sequencing can prevent reliable startup.
Create the BGA land pattern only from the official XC4VFX40 package drawing and pin-definition tables. With 352 inputs and 352 outputs, pin assignment must account for dedicated clocking, configuration pins, power balls, and user I/O. Route high-speed clocks on controlled-impedance layers with continuous reference planes, avoid splits under BGA escape routes, and keep configuration and sensitive inputs away from fast-switching outputs. Validate escape-routing vias and layer transitions during stack-up review.
Estimate junction temperature from the selected FPGA configuration, I/O activity, package thermal data, board copper, airflow, and ambient temperature. Do not treat the 1028 MHz maximum clock as a continuous operating point; actual switching activity and routing determine dynamic power. Place thermal monitoring near the hottest board area and include the FPGA in enclosure thermal qualification. For legacy hardware refreshes, measure the operating board rather than relying only on nominal device calculations.
Do not treat a matching BGA package as sufficient proof of interchangeability. Verify the exact suffix, temperature grade, speed grade, configuration bitstream, pin definitions, power sequencing, and I/O standards. The -10 speed grade and 41,904 logic cells match across the listed family variants, but their ordering suffixes have distinct commercial or environmental meanings. Preserve configuration files and verify the selected bitstream against the final device ID and package revision before field updates.
Uyumluluk Bilgisi
The indexed device records do not provide definitive environmental or material-compliance declarations for the exact XC4VFX40-10FF672C ordering code. AEC-Q100 is not applicable to this general-purpose FPGA ordering option.