XC5VFX30T-1FFG665C - 30K Virtex-5 FXT FPGA | AMD Xilinx
MPN: XC5VFX30T-1FFG665C ✓ AktifXC5VFX30T-1FFG665C Genel Bakış
A field-programmable gate array is a semiconductor device whose digital circuits are configured after manufacture. An FPGA sits within the programmable-logic hierarchy and the broader semiconductor category, allowing designers to implement parallel data processing, control, interface, and signal-processing functions without creating a custom application-specific integrated circuit. Virtex-5 FXT devices extend that architecture with dedicated DSP resources for multipliers, accumulators, filters, and high-throughput arithmetic.
The XC5VFX30T-1FFG665C provides 32,768 logic cells and 64 multipliers, each identified as 25x18 bits in the technical listing. Its 360 I/O support broad connectivity for parallel buses, control signals, memory interfaces, and external peripherals. The 665-BBGA FCBGA package supports dense board integration while requiring careful layout of power, ground, high-speed routing, and decoupling. The JEDEC package code is S-PBGA-B665.
The part uses the -1 speed designation, making it the lowest listed speed grade among several Virtex-5 FXT options. Lower speed grades are often useful when maximum switching performance is unnecessary, although timing closure still depends on the selected I/O standard, logic path, clocking arrangement, and target device. The device belongs to the Virtex-5 family with second-generation ASMBL column-based architecture, providing a programmable mix of logic, memory, arithmetic, connectivity, and transceiver resources.
Typical uses include communications infrastructure, industrial signal processing, test and measurement, video-processing pipelines, high-speed interface bridging, and embedded control systems with substantial parallel-processing requirements. In each case, the 64 dedicated multipliers can accelerate DSP operations while the 360 I/O expand interface capacity. The 0°C to 85°C temperature range targets commercial-temperature equipment rather than extended industrial or automotive temperature classes.
Board design must follow the package pinout and power-supply requirements in the Virtex-5 FXT documentation. Place decoupling capacitance close to the appropriate supply pins, preserve the specified plane and via geometry, and maintain controlled-impedance routing for high-speed interfaces. Configuration, clocking, differential signaling, and exposed thermal-management requirements should be reviewed before schematic and layout release.
This page organizes the verified device identity, temperature and package information, drop-in speed-grade choices, practical application guidance, and design cautions. It also identifies parameters that must be confirmed against the Virtex-5 FXT data sheet and package documentation before component selection or PCB release.
Drop-in alternatifler için XC5VFX30T-1FFG665C — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC5VFX30T-1FFG665C (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Speed Grade, Package, Logic Elements, Package Type.
XC5VFX30T-2FFG665C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC5VFX30T-3FFG665C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC5VFX30T-1FFG665I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC5VFX30T-1FFG665CES
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC5VFX30T-2FFG665I
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC5VFX30T-1FFG665C Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Virtex-5 FXT field-programmable gate array |
| Logic Cells | 32,768 cells |
| I/O Count | 360 I/O |
| Dedicated Multipliers | 64 multipliers |
| Multiplier Width | 25x18 bits |
| Logic-Cell Bit Capacity | 389,120 bits |
| Speed Grade | -1 |
| Minimum Operating Temperature | 0°C |
| Maximum Operating Temperature | 85°C |
| Paket | 665-BBGA FCBGA |
| JEDEC Package Code | S-PBGA-B665 |
| Number of Package Balls | 665 balls |
| Architecture | Second-generation ASMBL column-based FPGA architecture |
| DSP Support | Yes |
| Family | Virtex-5 FXT |
XC5VFX30T-1FFG665C 665 balls Pin Yapısı Kılavuzu
XC5VFX30T-1FFG665C (665 balls paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC5VFX30T-1FFG665C.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC5VFX30T-1FFG665C için uygundur 6 uygulamas: Communications Infrastructure, Industrial Signal Processing, Video Processing Pipelines, Test and Measurement, High-Speed Interface Bridging, Aerospace and Defense Control.
Communications Infrastructure
The XC5VFX30T-1FFG665C fits communications equipment requiring parallel packet processing and programmable interface logic. Its 32,768 logic cells support protocol state machines, framing, buffering, and control paths, while 360 I/O provide substantial board-level connectivity. The 64 dedicated 25x18-bit multipliers can support filtering and correlation tasks without consuming general logic. Place the device behind appropriately controlled clock and power distribution, and verify each high-speed interface against the -1 timing grade before board release.
Önerilen
Industrial Signal Processing
The XC5VFX30T-1FFG665C is appropriate for parallel sensor acquisition, condition monitoring, and real-time DSP when its 0°C to 85°C range covers the enclosure environment. The 64 dedicated multipliers accelerate finite impulse response filtering, correlation, and fixed-point arithmetic, while the large logic-cell count supports control and data-path functions. For installations requiring temperatures above 85°C, use the documented industrial-temperature suffix and revalidate timing, power, and reliability at the worst-case conditions.
Önerilen
Video Processing Pipelines
The XC5VFX30T-1FFG665C can implement parallel video timing, pixel transport, color processing, and test-pattern generation in a single programmable device. Its 360 I/O provide capacity for wide pixel buses and control signals, and its 64 dedicated multipliers support scaling, filtering, and matrix operations. The principal constraint is system timing at the -1 speed grade, so external memory interfaces and high-speed video links should be constrained and analyzed early. Use the package ball map to preserve the intended polarity and data positions.
Önerilen
Test and Measurement
The XC5VFX30T-1FFG665C suits programmable logic, pattern generation, acquisition, and analysis instruments that require deterministic parallel throughput. The 32,768 logic cells can host complex control sequences, while the dedicated multipliers support digital calibration and filtering functions. Its 360 I/O permit broad connection to converters, memory, and trigger systems. Clock jitter, pin-transition requirements, and the -1 I/O timing budget must be reviewed together because meeting internal logic timing alone does not guarantee a complete instrument design.
Önerilen
High-Speed Interface Bridging
The XC5VFX30T-1FFG665C can bridge parallel and serial domains when a design needs substantial programmable logic around dedicated transceivers. Its 360 I/O support chip-to-chip buses and control channels, while the 32,768 logic cells provide buffers, descramblers, CRC logic, and protocol state machines. Because exact transceiver count, pin assignments, and supported rates are device-specific, engineers must use the Virtex-5 FXT package and data-sheet documents. Controlled-impedance routing and complete signal-integrity simulation remain essential before fabrication.
Önerilen
Aerospace and Defense Control
The XC5VFX30T-1FFG665C may be considered for programmable control, data acquisition, and embedded test logic when the device qualification, temperature range, and export requirements are acceptable for the specific program. Its 32,768 logic cells and 64 multipliers support parallel control and signal-processing workloads. Do not infer aerospace or defense qualification solely from the FPGA family: review the exact ordering code, screening records, reliability documentation, and applicable certification requirements with the manufacturer before design commitment.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC5VFX30T-1FFG665C — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC5VFX30T-2FFG665C | XC5VFX30T-3FFG665C | XC5VFX30T-1FFG665I | XC5VFX30T-1FFG665CES | XC5VFX30T-2FFG665I |
|---|---|---|---|---|---|---|
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| Package | 665-BBGA FCBGA | 665-BBGA FCBGA | 665-BBGA FCBGA | 665-BBGA FCBGA | 665-BBGA FCBGA | 665-BBGA FCBGA |
| Logic Cells | 32,768 cells | 32,768 cells | 32,768 cells | 32,768 cells | 32,768 cells | 32,768 cells |
| I/O Count | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O |
| Dedicated Multipliers | 64 multipliers, 25x18 bits | 64 multipliers, 25x18 bits | 64 multipliers, 25x18 bits | 64 multipliers, 25x18 bits | 64 multipliers, 25x18 bits | 64 multipliers, 25x18 bits |
| Speed Grade | -1 | -2 | -3 | -1 | -1 | -2 |
| Temperature Grade | Commercial, 0°C to 85°C | Commercial, 0°C to 85°C | Commercial, 0°C to 85°C | Industrial-temperature suffix | Engineering-sample suffix | Industrial-temperature suffix |
| JEDEC Package Code | S-PBGA-B665 | S-PBGA-B665 | S-PBGA-B665 | S-PBGA-B665 | S-PBGA-B665 | S-PBGA-B665 |
| Architecture | Virtex-5 FXT second-generation ASMBL | Virtex-5 FXT second-generation ASMBL | Virtex-5 FXT second-generation ASMBL | Virtex-5 FXT second-generation ASMBL | Virtex-5 FXT second-generation ASMBL | Virtex-5 FXT second-generation ASMBL |
Ana Farklılayıcılar
- Lower speed grade provides a distinct performance and power option within the same architecture (karşılaştırma:XC5VFX30T-2FFG665C)
- Commercial-temperature C suffix is clearly differentiated from the industrial option (karşılaştırma:XC5VFX30T-1FFG665I)
- Production C-grade ordering code avoids reliance on an engineering-sample suffix (karşılaştırma:XC5VFX30T-1FFG665CES)
Tasarım Notları
Design the power tree directly from the Virtex-5 FXT data sheet and package power requirements. Separate supplies where the device specifies distinct rails, route them with low-impedance planes, and place local high-frequency decoupling immediately across the relevant BGA balls. Verify sequencing, ramp limits, and current at full I/O and DSP activity rather than relying on a nominal or lightly loaded board measurement.
Treat the 665-ball FCBGA as a high-pin-count controlled-impedance design. Follow the manufacturer escape-routing and via geometry for each supply and signal class, maintain the prescribed ball-pad and mask geometry, and use plane stitching to suppress resonances. Do not derive the ball map from XC5VLX30T or another 665-ball FPGA; even a shared package can have different device-specific ball assignments.
Estimated: the allowable junction-temperature rise equals the maximum junction temperature minus ambient temperature, and device power must remain below that rise after adding board and via thermal resistance. Exact dissipation depends on utilization, I/O activity, clocking, supply voltage, and the selected speed grade, so use the AMD power-estimation methodology rather than assigning a single nominal dissipation value. Provide thermal vias and copper spreading beneath the BGA.
Constrain every high-speed interface with the documented device and board timing specifications, including external transceiver paths, memory interfaces, and source-synchronous buses. Use the -1 device speed data for timing closure and validate the final stack-up with post-route simulation and measurements on a representative board. The 360 I/O count does not guarantee that all pins can operate at the same maximum I/O rate.
Avoid substituting a related Virtex-5 part solely because it also uses a 665-ball package. XC5VLX30T uses a different platform and resource mix, while speed, temperature, engineering-sample, and device identifiers affect qualification, timing, lifecycle, or bitstream support. Confirm the exact ordering code, device support in the implementation flow, operating-temperature grade, and lifecycle status before releasing the BOM.
Uyumluluk Bilgisi
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified discrete semiconductor.