XC6SLX75-N3FG676I - 408 I/O Spartan-6 LX FPGA | Xilinx
MPN: XC6SLX75-N3FG676I ✗ Son Kullanım ZamanıXC6SLX75-N3FG676I Genel Bakış
A field-programmable gate array is a programmable logic device in which configurable logic blocks, programmable input/output resources, memory, and dedicated hard blocks are combined on one semiconductor die. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides higher logic capacity and more parallel resources than a conventional microcontroller while implementing a fixed circuit defined by a bitstream rather than software executed by a central processor.
The XC6SLX75 device provides 408 user I/O in a 676-ball package, making it appropriate for designs that need numerous external connections, including high-speed parallel interfaces, data acquisition, industrial controllers, communications equipment, and embedded video processing. Its 1.14 V to 1.26 V core operating range is supported by the manufacturer datasheet, while the specific I/O voltage, configuration interface, and performance ratings should be selected according to the complete device documentation.
The Spartan-6 LX architecture combines configurable logic with dedicated resources for block RAM, digital signal processing, and clock management. This mixed architecture allows designers to place time-critical operations in parallel rather than relying on sequential instruction execution. Configuration determines which interconnect paths and logic functions are active after power-up, so the device can implement multiple hardware functions while maintaining deterministic response times.
Typical uses include industrial automation modules, telecommunications line-card equipment, high-channel-count data-conversion systems, instrumentation, test-and-measurement platforms, and general-purpose embedded controls. The large 676-ball package is especially useful when the board area can accommodate a fine-pitch BGA and the design requires numerous parallel I/O rather than a small number of high-speed serial links.
Board design requires careful attention to power sequencing, decoupling, configuration control, and BGA escape routing. Follow the pin-description table and recommended power architecture in the AMD manufacturer datasheet, preserve the specified supply tolerances, and validate every high-speed interface against the relevant I/O and timing specifications before fabrication.
This page organizes the known package, I/O, voltage, temperature-grade, and sourcing information with a focused replacement analysis. It also distinguishes a verified same-footprint option from package variants that require PCB changes, helping engineers screen candidates before performing a full design-level equivalence review.
Drop-in alternatifler için XC6SLX75-N3FG676I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XC6SLX75-N3FG676I (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Core Supply Voltage, Temperature Grade, Programmable I/O Count, User I/O.
XC6SLX75-N3FGG676I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XC6SLX75-N3FG676I Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Spartan-6 LX Field Programmable Gate Array (FPGA) |
| User I/O Count | 408 I/O |
| Paket | 676-ball BGA |
| Package Dimensions | 27 mm x 27 mm |
| Montaj Türü | Surface mount |
| Core Supply Voltage | 1.14 V to 1.26 V |
| Temperature Grade | Industrial |
| Logic Family | Spartan-6 LX |
| Programmable Logic Type | FPGA |
| Terminal Type | Ball |
| Package Shape | Square |
| Number of Terminals | 676 terminals |
XC6SLX75-N3FG676I square Pin Yapısı Kılavuzu
XC6SLX75-N3FG676I (square paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XC6SLX75-N3FG676I.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XC6SLX75-N3FG676I için uygundur 6 uygulamas: Industrial Automation Controllers, Telecommunications Line Cards, High-Channel Data Acquisition, Test and Measurement Instrumentation, Embedded Video Processing, Network and Communication Equipment.
Industrial Automation Controllers
The XC6SLX75-N3FG676I fits industrial automation controllers that need many discrete inputs, machine outputs, encoder channels, and communication lines on one programmable-logic device. Its 408 I/O allows parallel control and acquisition functions to be consolidated without routing every signal through an external microcontroller. The 1.14 V to 1.26 V core operating range provides the basis for a multi-rail industrial power design, while the 676-ball BGA supports dense board placement. Before schematic release, confirm the required I/O standards, operating-temperature limits, and timing margins in the AMD manufacturer datasheet.
Önerilen
Telecommunications Line Cards
The XC6SLX75-N3FG676I is suitable for telecommunications line-card and interface designs requiring parallel datapaths, protocol conversion, timing generation, and multiple external connections. The Spartan-6 LX architecture can implement fixed-function logic in parallel, avoiding the sequential overhead of a general-purpose processor for time-critical transport functions. Its 408 I/O provides substantial interface capacity in a single 27 mm by 27 mm BGA. Validate line-rate timing, I/O voltage classes, clocking architecture, and thermal performance against the complete manufacturer specification before production.
Önerilen
High-Channel Data Acquisition
The XC6SLX75-N3FG676I supports high-channel-count acquisition systems where multiple sensor outputs, ADC buses, capture registers, and control signals must operate concurrently. The 408 I/O count allows parallel sampling and data-routing functions to remain close to the converter interfaces, reducing external glue logic. Its configurable logic can implement acquisition control, triggers, calibration tables, and data formatting in hardware for predictable throughput. Confirm converter timing, input thresholds, supply levels, and simultaneous-switching behavior in the system design and manufacturer datasheet.
Önerilen
Test and Measurement Instrumentation
The XC6SLX75-N3FG676I fits programmable instrumentation that coordinates acquisition, stimulus generation, timing, and result processing across many channels. Parallel programmable logic can create deterministic triggers and pipelines while the large I/O count connects multiple instruments and logic probes. The industrial-grade designation supports designs intended for controlled operating environments, subject to the specified temperature limits. Use the manufacturer timing tables for high-speed interfaces and review clock-jitter, I/O capacitance, and termination requirements before releasing the PCB.
Önerilen
Embedded Video Processing
The XC6SLX75-N3FG676I can serve as the programmable fabric in embedded video systems requiring parallel pixel, control, and memory-interface connectivity. Configurable logic may perform capture timing, synchronization, color processing, overlay, and data movement, while dedicated FPGA resources support parallel throughput. The 408 I/O count is useful when the design uses multiple video interfaces or auxiliary control buses. Select the appropriate I/O voltage, memory interface, and clocking resources from the device tables and verify signal integrity at the selected pixel rate.
Önerilen
Network and Communication Equipment
The XC6SLX75-N3FG676I is appropriate for network-interface modules that require simultaneous packet processing, buffering, backplane signaling, and control-plane coordination. Its 408 I/O and Spartan-6 LX logic resources allow multiple narrow data interfaces to be consolidated into a programmable architecture. The 676-ball package supports a compact but routing-intensive implementation, making careful layer planning and power integrity essential. Confirm transceiver I/O standards, supported clocking schemes, and timing closure in the AMD manufacturer datasheet before schematic and board-layout signoff.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XC6SLX75-N3FG676I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XC6SLX75-N3FGG676I |
|---|---|---|
| Brand | Xilinx | Xilinx |
| Package | 676-ball BGA | 676-ball BGA (FGG676) |
| Logic Family | Spartan-6 LX | Spartan-6 LX |
| Device Designation | XC6SLX75 | XC6SLX75 |
| Speed Designation | N3 | N3 |
Ana Farklılayıcılar
- Retains the same Spartan-6 LX device family (karşılaştırma:XC6SLX75-N3FGG676I)
- Uses a verified 676-ball replacement candidate (karşılaştırma:XC6SLX75-N3FGG676I)
- Provides 408 I/O for interface-dense systems (karşılaştırma:XC6SLX75-N3FGG676I)
Tasarım Notları
Design the complete power tree from the AMD manufacturer datasheet rather than applying a generic BGA power plan. The device operates from a 1.14 V to 1.26 V core supply, but configuration, auxiliary, and user-I/O supplies may require separate rails. Place bulk and high-frequency decoupling at the locations prescribed for the package, preserve adequate copper connectivity around the BGA, and verify steady-state and startup current against the selected configuration method.
Treat the 27 mm by 27 mm 676-ball footprint as a demanding escape-routing problem. Match ball locations to the exact package drawing and use a layer stack that supports the required power, ground, and high-speed routing layers. Avoid routing sensitive clocks or differential pairs through power-plane splits, maintain the specified return path, and use the manufacturer escape guidance when a via-in-pad process is required.
Separate configuration signals from sensitive user interfaces and keep clock inputs away from high-slew-rate outputs where practical. Follow the manufacturer's guidance for configuration pins, mode straps, and startup behavior. Because an incorrect pin assignment can prevent configuration even when the FPGA itself is functional, perform board-level continuity checks and verify configuration behavior with the intended cable or boot source.
Do not treat any XC6SLX75 part with a different package suffix as a board-level substitute. The 484-ball variants suggested by common searches require a different footprint and routing plan, while the 676-ball FGG676 candidate still requires confirmation of pinout, die, speed grade, temperature grade, and marking. Check the complete ordering information and device tables before releasing a replacement into production.
Estimate junction temperature from the actual device activity, core supply, and I/O loading rather than core voltage alone. Provide uninterrupted thermal copper beneath the BGA where the package construction allows it, avoid enclosing the board in an unventilated enclosure, and apply the manufacturer's power-dissipation and thermal metrics. Estimated: junction rise equals power dissipation multiplied by the applicable junction-to-ambient thermal resistance for the actual PCB and enclosure.
Uyumluluk Bilgisi
The industrial temperature designation does not by itself indicate AEC-Q100 qualification. Compliance and material declarations must be confirmed from the current manufacturer or supplier documentation for the exact device and condition.