XCKU035-2FFVA1156I - 444343-Cell Kintex UltraScale FPGA | AMD
MPN: XCKU035-2FFVA1156I ✓ AktifXCKU035-2FFVA1156I Genel Bakış
A field-programmable gate array is a semiconductor device whose digital logic and interconnect are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic IC and a configurable silicon device. Compared with application-specific integrated circuits, an FPGA allows designers to adapt interfaces, parallel algorithms, and system functions in hardware while retaining the performance and flexibility of parallel hardware execution. The Kintex UltraScale family occupies the middle of the AMD/Xilinx product range between lower-density devices and larger UltraScale devices.
The XCKU035 combines 444343 logic cells with 19,456,000 RAM bits and 520 I/O in a compact 1156-contact FCBGA. Its 20 nm fabrication process supports higher transistor density than older FPGA generations, while the 0.95 V operating point helps designers evaluate core power and thermal-management requirements. The I/O count is particularly useful for parallel sensor acquisition, data-center aggregation, industrial control, telecommunications, test equipment, and high-speed programmable signal-processing systems.
The -2 portion of the part number identifies the device performance grade within the Kintex UltraScale ordering system. The FFVA1156 portion identifies the 1156-ball organic-finish FCBGA configuration, while the terminal I identifies the specified temperature grade. Designers must treat speed grade, temperature grade, and package as separate qualification dimensions because changing one ordering suffix does not necessarily preserve every qualification requirement of the original design.
Typical deployments include network packet processing, high-throughput data acquisition, industrial automation, scientific instrumentation, communications infrastructure, defense electronics, and accelerator prototyping. In these applications, the FPGA can implement parallel datapaths, protocol handling, packet filtering, signal conditioning, and fixed-function acceleration without relying on a sequence of external processors. The large I/O and RAM resources also allow designers to buffer data locally and reduce transfers across external memory interfaces.
The primary design consideration is that a 1156-ball BGA requires careful PCB escape routing, uninterrupted supply planes, via-in-pad or fanout-compatible assembly, and BGA-specific inspection. Signal-integrity analysis should cover every high-speed interface, while power planning should account for core, auxiliary, and I/O supplies separately. Differential-pair geometry, reference-plane continuity, and package-construction controls should follow AMD’s package pinout files and the applicable high-speed design guidance.
This product record combines the exact ordering information, package characteristics, resource counts, lifecycle indication, compatible Kintex UltraScale alternatives, and engineering guidance needed for initial design review. It also identifies the limits of the current technical record so procurement and PCB teams can resolve remaining electrical, timing, thermal, and assembly requirements directly with AMD documentation.
Drop-in alternatifler için XCKU035-2FFVA1156I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XCKU035-2FFVA1156I (aynı form faktörü ve ayağa oturma) — farklı olan Package Type, Logic Cells, Temperature Grade, Device Type, RoHS Status.
XCKU035-1FFVA1156I
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XCKU035-1FFVA1156C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XCKU035-2FFVA1156E
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XCKU035-1FFVA1156E
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XCKU040-1FFVA1156C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XCKU035-2FFVA1156I Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Kintex UltraScale field-programmable gate array (FPGA) |
| Programmable Logic Cells | 444343 cells |
| Logic Cells | 253912 logic cells |
| Total RAM Bits | 19456000 bits |
| Input/Output Count | 520 I/O |
| Package Type | 1156-ball FCBGA |
| Package Designation | 1156-BBGA |
| Montaj Türü | Surface mount |
| Process Technology | 20 nm |
| Core Voltage | 0.95 V |
| İşletim Sıcaklığı Aralığı | -40°C to +100°C |
| Performance Grade | -2 speed grade |
| Temperature Grade | I industrial temperature grade |
| Series | Kintex UltraScale |
| RoHS Durumu | Compliant |
| Programmability | Field programmable |
| Yaşam Döngüsü Durumu | Active |
| Pin Sayısı | 1156 contacts |
XCKU035-2FFVA1156I 1156-bbga Pin Yapısı Kılavuzu
XCKU035-2FFVA1156I (1156-bbga paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XCKU035-2FFVA1156I.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XCKU035-2FFVA1156I için uygundur 6 uygulamas: High-Speed Data Acquisition, Network Packet Processing, Industrial Automation and Control, Scientific Instrumentation, Telecommunications Infrastructure, Hardware Accelerator Prototyping.
High-Speed Data Acquisition
The XCKU035-2FFVA1156I fits parallel data-acquisition systems that need to sample, filter, and buffer many channels concurrently. Its 520 I/O provide a broad interface surface, while 19,456,000 RAM bits can hold channel data, descriptors, and intermediate results closer to the acquisition logic. The -2 performance grade is useful when the clock period must support demanding parallel pipelines or repeated real-time processing stages. In implementation, route wide interfaces through matched PCB layers, maintain continuous reference planes beneath high-speed nets, and reserve decoupling and via-in-pad structures for the 1156-ball FCBGA. The benefit is reduced external-memory traffic and deterministic parallel throughput, although clocking, power integrity, and pin-bank validation must be completed before final routing.
Önerilen
Network Packet Processing
The XCKU035-2FFVA1156I is suitable for line-rate packet classification, filtering, queuing, and protocol handling because 444343 programmable logic cells and 19,456,000 RAM bits support concurrent parallel stages. Its 520 I/O can accommodate broad parallel interfaces when sufficient board-level routing is available, while programmable logic can implement lookups, CRC engines, and traffic policies. The -2 grade is advantageous for pipelines constrained by short clock periods. A practical design would partition header classification, payload processing, buffering, and management into parallel lanes, then connect them with deterministic timing. Designers should verify the exact transceiver count and speed ratings from AMD documentation and confirm package pin assignments before selecting board connectors or optical modules.
Önerilen
Industrial Automation and Control
The XCKU035-2FFVA1156I can support industrial controllers that combine sensor acquisition, real-time control, machine vision preprocessing, and communications in one programmable device. Its 520 I/O is useful for multiple sensor and actuator interfaces, while its large RAM complement supports local buffering and state-machine execution. The I temperature grade is identified for operation from -40°C to +100°C, making it relevant to industrial equipment when enclosure thermal conditions remain inside that range. Use the device for deterministic parallel control rather than general-purpose software execution, and validate every I/O bank's voltage, slew, and termination requirements. Thermal analysis should include the BGA's coupled heat flow into the PCB, with the exposed package thermal behavior managed through the recommended stack-up and copper strategy.
Önerilen
Scientific Instrumentation
The XCKU035-2FFVA1156I is well suited to scientific instruments that acquire, correlate, and transform multiple measurement channels in parallel. The combination of 444343 logic cells, 19,456,000 RAM bits, and 520 I/O enables digital filtering, waveform generation, calibration tables, and real-time trigger logic to share one device. The -2 performance grade can shorten the critical path in iterative processing pipelines, while block RAM can retain sample windows for analysis. The implementation should treat analog front-end settling, ADC clocking, and FPGA acquisition timing as one system. Use short, referenced routes for clock and data nets, verify differential-pair geometry for high-speed interfaces, and isolate noisy analog sections from the dense digital BGA escape area to preserve measurement integrity.
Önerilen
Telecommunications Infrastructure
The XCKU035-2FFVA1156I can implement high-throughput telecom functions such as packet shaping, protocol conversion, traffic monitoring, and hardware-assisted cryptography when a system needs substantial parallel logic. The 19,456,000 RAM bits provide local storage for packet windows, and the 520 I/O enable wide control and data-plane interfaces. Its -2 performance grade supports clock-intensive datapaths more effectively than the -1 grade when timing margins are tight. Board-level implementation must address regulated power rails separately from the 0.95 V core domain, control startup sequencing, and maintain high-speed return paths beneath transceiver and memory interfaces. The device is best selected when fixed-function parallel processing and field programmability are both required, provided system qualification and long-term supply planning are completed.
Önerilen
Hardware Accelerator Prototyping
The XCKU035-2FFVA1156I is a practical FPGA platform for prototyping parallel accelerators because the 444343 logic cells and 19,456,000 RAM bits can host substantial concurrent pipelines. Its 520 I/O provides access to a wide range of external memories, accelerators, test equipment, and custom boards, while the -2 grade helps preserve clock frequency in compute-heavy logic. Teams can partition arithmetic pipelines across logic and RAM resources, then validate throughput using counters, chip-level debug facilities, and boundary scan. Before hardware release, check every high-speed interface against the package pinout, confirm that the BGA assembly process supports the selected pad geometry, and perform power-integrity simulations. The principal trade-off is that general-purpose parallelism may not deliver uniform gains if memory bandwidth, routing congestion, or external I/O becomes the limiting factor.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XCKU035-2FFVA1156I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XCKU035-1FFVA1156I | XCKU035-1FFVA1156C | XCKU035-2FFVA1156E | XCKU035-1FFVA1156E | XCKU040-1FFVA1156C |
|---|---|---|---|---|---|---|
| Package | 1156-BBGA, FCBGA | 1156-BBGA, FCBGA | 1156-BBGA, FCBGA | 1156-BBGA, FCBGA | 1156-BBGA, FCBGA | 1156-BBGA, FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Series | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale |
| Performance Grade | -2 | -1 | -1 | -2 | -1 | -1 |
| Temperature Suffix | I | I | C | E | E | C |
Ana Farklılayıcılar
- Higher performance grade within the same 1156-ball package family (karşılaştırma:XCKU035-1FFVA1156I)
- Retains the -2 grade when changing temperature suffix (karşılaştırma:XCKU035-2FFVA1156E)
- Industrial I temperature designation with the -2 performance grade (karşılaştırma:XCKU035-1FFVA1156C)
- Exact XCKU035 resource class avoids cross-density design changes (karşılaştırma:XCKU040-1FFVA1156C)
Tasarım Notları
Design the PCB around the 1156-ball FCBGA rather than treating it as a generic fine-pitch BGA. Use AMD's official ASCII and CSV package files to assign every ball, preserve the package's power and ground balls according to the pinout guidance, and create escape routing that remains compatible with the selected assembly process. Verify via-in-pad or fanout requirements with the assembler before committing to the stack-up. A BGA footprint error can make an otherwise correct FPGA design unmanufacturable.
Plan the 0.95 V core rail and the device's auxiliary and I/O supplies as separate power domains with independently verified current requirements. Follow the manufacturer guidance for voltage sequencing, decoupling, and power-source selection instead of deriving limits from the core voltage alone. Place the required bulk and high-frequency decoupling near the relevant BGA power and ground balls, preserve low-impedance plane connections, and run power-integrity analysis for worst-case switching activity. This is especially important because high utilization across 444343 programmable logic cells can produce dynamic current transients.
Assign high-speed interfaces through the official package pinout and confirm each interface's speed, voltage, and I/O-standard constraints before PCB routing. Maintain continuous reference planes beneath clocks, serial links, and parallel buses; use the manufacturer's recommended topology for length matching and avoid plane splits beneath active routes. Simulate the worst-case board and component variations, and include realistic power-supply noise in the eye-diagram budget. The -2 speed grade can expose marginal routing that would pass in a lower-speed design.
Evaluate junction temperature using the AMD-recommended power methodology and the actual PCB stack-up, copper distribution, airflow, and adjacent heat sources. The 1156-ball package's thermal performance depends strongly on heat spreading into the board, so a nominal package dimension alone is insufficient for a thermal estimate. Route thermal currents through the package's designated thermal balls or lands, model nonuniform activity rather than assuming uniform utilization, and verify the final assembly under maximum expected logic and I/O activity. Add thermal sensors or design margin if the ambient range approaches the upper device limit.
Do not treat a package-compatible ordering variant as an automatic drop-in qualification. When moving from XCKU035-2FFVA1156I to XCKU035-1FFVA1156I, XCKU035-1FFVA1156C, or XCKU035-2FFVA1156E, review timing closure, temperature requirements, power behavior, and system qualification. For XCKU040-1FFVA1156C, also review utilization, memory availability, pin assignments, and routing changes caused by the different logic-resource density. Preserve the full ordering code in procurement records to avoid mixing performance and temperature grades.
Uyumluluk Bilgisi
RoHS compliance is identified for the exact XCKU035-2FFVA1156I ordering code. No definitive REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is included in the product records.