XMC1100T016X0064ABXUMA1 - 32MHz Cortex-M0 64KB Flash MCU, PG-TSSOP-16 | Infineon Technologies
MPN: XMC1100T016X0064ABXUMA1 ✓ AktifXMC1100T016X0064ABXUMA1 Genel Bakış
An MCU is a microcontroller: a single integrated circuit containing a CPU core, non-volatile program memory, RAM, and peripherals such as analog-to-digital converters, serial transceivers and timers. In the product hierarchy, the XMC1100 belongs to the 32-bit microcontroller class, sits below the ARM Cortex-M0+ family concept, and above general-purpose embedded controllers used in appliance, industrial control and sensing equipment.
Key differentiating features of this part are its 64 KB Flash footprint, which allows full protocol stacks and touch/control firmware to be held on-chip, its 16 KB SRAM for buffer handling, and its small 16-pin TSSOP land pattern, which keeps board area below 10 mm2 of lead area. The device operates from a 3.3 V or 5 V supply, giving design flexibility across legacy 5 V industrial rails and modern 3.3 V systems. The embedded 12-bit ADC with 8 channels supports direct analog measurement without external converters.
Technically, the XMC1100 uses the ARM Cortex-M0 instruction set with a three-stage pipeline, and its port peripherals support alternate output functions mapped onto individual pins through dedicated IOCR port control registers. The device combines a 32 MHz oscillator-based clock tree, watchdogs, and multiple serial channels, making it suitable for cost-sensitive control nodes in building automation, appliance control, simple sensor hubs and industrial HMI panels.
Typical applications include building automation wall switches, motor and pump controllers, battery-powered sensor nodes, LED lighting controllers, and compact industrial data acquisition modules. Because the same XMC1100 family also exists in larger TSSOP, TOFN and QFN packages with more GPIO and ADC channels, firmware can be reused across the family while the 16-pin variant serves cost-driven designs.
When laying out the board, place the decoupling capacitor at the VDD pin as close to the pad as possible, keep analog inputs on dedicated analog pins away from fast switching nets, and follow the recommended via-in-pad and ground-plane arrangement from the manufacturer datasheet. This page combines the manufacturer datasheet specifications, distributor availability, drop-in alternatives within the XMC1100 family, and practical design guidance that the datasheet alone does not summarize.
Drop-in alternatifler için XMC1100T016X0064ABXUMA1 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XMC1100T016X0064ABXUMA1 (aynı form faktörü ve ayağa oturma) — farklı olan Flash Memory, Package, Architecture, Core, Supply Voltage.
XMC1100-T016X0064-AB
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XMC1100-T016F0064-AB
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XMC1100T016F0016ABXUMA1
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XMC1100T016X0016ABXUMA1
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XMC1100T016X0064AAXUMA1
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XMC1100T016X0064ABXUMA1 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Core | ARM Cortex-M0, 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Besleme Gerilimi | 3.3 V or 5 V |
| ADC | 12-bit ADC, 8 channels |
| Serial Interfaces | UART/USART, SPI, I2C |
| Timer Modules | Multi-channel 16-bit timers with PWM output |
| GPIO | Port 0 and Port 1 general-purpose I/O with alternate output functions |
| Paket | PG-TSSOP-16-8, 16 pins |
| Montaj Türü | Surface mount |
| Product Series | XMC1000 / XMC1100 |
| Qualification | Industrial grade (ordering code AB) |
| Order Code Step | AB-step device |
| Delivery Packaging | Tape and reel (T/R) |
XMC1100T016X0064ABXUMA1 Pin Yapısı
| Pin 1 | AN0 — Analog input channel 0 (ADC) |
| Pin 2 | AN1 — Analog input channel 1 (ADC) |
| Pin 3 | AN2 — Analog input channel 2 (ADC) |
| Pin 4 | AN3 — Analog input channel 3 (ADC) |
| Pin 5 | AN4 — Analog input channel 4 (ADC) |
| Pin 6 | AN5 — Analog input channel 5 (ADC) |
| Pin 7 | AN6 — Analog input channel 6 (ADC) |
| Pin 8 | AN7 — Analog input channel 7 (ADC) |
| Pin 9 | P1.0 — Port 1 general-purpose I/O pin 0 with alternate peripheral output functions |
| Pin 10 | P1.1 — Port 1 general-purpose I/O pin 1 with alternate peripheral output functions |
| Pin 11 | P1.2 — Port 1 general-purpose I/O pin 2 with alternate peripheral output functions |
| Pin 12 | P1.3 — Port 1 general-purpose I/O pin 3 with alternate peripheral output functions |
| Pin 13 | VDD — Main supply input (3.3 V or 5 V), decoupling required |
| Pin 14 | VSS — Ground reference |
| Pin 15 | RST — Active-low reset input |
| Pin 16 | XTEST — Test pin for production test mode |
Tipik Uygulamalar
XMC1100T016X0064ABXUMA1 için uygundur 6 uygulamas: Building Automation Wall Switch and Sensor Hub, Small Motor and Pump Controller, Industrial Sensor and Data Acquisition Node, LED Lighting and Dimming Controller, Appliance Control and Human Interface Module, Battery-Powered Portable Metering Device.
Building Automation Wall Switch and Sensor Hub
The XMC1100T016X0064ABXUMA1 fits building automation nodes because it integrates a 12-bit ADC with 8 analog channels, multiple timer channels for contact debouncing and dimming, and UART/SPI/I2C ports for bus and gateway connectivity, all within a 16-pin TSSOP-16 footprint. With 64 KB of Flash, room is available for a stack-based firmware that handles bus arbitration, hysteresis logic and periodic reporting, while 16 KB of SRAM supports receive buffers. Compared with an 8-bit MCU, the 32 MHz Cortex-M0 core handles protocol parsing and filtering without straining the CPU budget, and the small PG-TSSOP-16-8 land pattern keeps the module under a few square centimetres of board area for flush-mounted wall boxes.
Önerilen
Small Motor and Pump Controller
In a compact pump or valve controller, the XMC1100T016X0064ABXUMA1 provides the timer channels required for PWM drive of MOSFET or valve drivers, plus the 8-channel 12-bit ADC for monitoring current, temperature and position sensors. The 32 MHz Cortex-M0 core gives deterministic control-loop response and leaves capacity for a closed-loop supervisory task, and 64 KB of Flash is sufficient for a field-updatable control firmware. Its PG-TSSOP-16-8 package reduces board area in space-constrained appliance environments, although designers should note that the small pin count limits available I/O, so motor outputs and sensor inputs must be multiplexed carefully with alternate output functions assigned through the port IOCR registers.
Önerilen
Industrial Sensor and Data Acquisition Node
The XMC1100T016X0064ABXUMA1 works well as a compact industrial acquisition node because its 12-bit ADC with 8 analog inputs can digitise several transducer channels directly, while UART/USART and I2C channels carry data to a gateway. Its 16 KB of SRAM supports sample buffering and averaging algorithms, and the 32 MHz core handles filtering without external signal conditioning beyond the usual anti-alias and input protection networks. The device operates from 3.3 V or 5 V, so it fits both legacy 24 V bus front-ends after regulation and modern 3.3 V distributed sensing networks, and the TSSOP-16-8 package allows DIN-rail and panel-mount formats with minimal footprint.
Önerilen
LED Lighting and Dimming Controller
For LED drivers and dimming modules, the XMC1100T016X0064ABXUMA1 offers multiple timer channels capable of generating PWM outputs for constant-current LED driver control, with the alternate output function mapping in the port IOCR registers letting a single pin serve as GPIO or as a peripheral output. The 64 KB Flash accommodates dimming tables, flicker algorithms and communication firmware, while the 16 KB SRAM is enough for look-up data and multi-channel fade state. Its small PG-TSSOP-16-8 package fits inside slim LED luminaires and driver modules where board area is at a premium, and the 3.3 V or 5 V supply flexibility supports both legacy driver electronics and newer constant-voltage LED boards.
Önerilen
Appliance Control and Human Interface Module
Appliance control boards typically need a microcontroller that reads a keypad or rotary encoder, drives a display and relays, and keeps cost per unit low, which is exactly the profile of the XMC1100T016X0064ABXUMA1. The 32 MHz Cortex-M0 core with 64 KB of Flash runs a UI state machine plus a protocol stack without external memory, the 8-channel 12-bit ADC handles temperature and level sensing, and the timer blocks generate the timing needed for debouncing and buzzer or motor drive. Because the family also exists in larger packages, firmware written for the 16-pin variant can be reused on higher-pin-count XMC1100 builds, which eases product-line scaling from a single appliance to a connected version.
Önerilen
Battery-Powered Portable Metering Device
The XMC1100T016X0064ABXUMA1 suits portable metering equipment because it pairs a low-cost 32-bit core with 64 KB of on-chip Flash, removing external memory cost and board area, and it can be clocked and duty-cycled through its timer and watchdog resources for average currents well below what a continuously running processor would draw. The 12-bit ADC with 8 channels supports direct measurement of battery voltage, current and sensor inputs, and the small PG-TSSOP-16-8 package suits a compact handheld enclosure. Design attention should go to decoupling at the supply pin and to avoiding fast-switching nets near the analog channels, so that measured readings stay within the accuracy expected of a 12-bit converter.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XMC1100T016X0064ABXUMA1 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XMC1100-T016X0064-AB | XMC1100-T016F0064-AB | XMC1100T016F0016ABXUMA1 | XMC1100T016X0016ABXUMA1 | XMC1100T016X0064AAXUMA1 |
|---|---|---|---|---|---|---|
| Package | PG-TSSOP-16-8 | PG-TSSOP-16-8 | PG-TSSOP-16-8 | PG-TSSOP-16-8 | PG-TSSOP-16-8 | PG-TSSOP-16-8 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| CPU Core | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB (64K x 8) | 64 KB | 64 KB | 16 KB (-75%) | 16 KB (-75%) | 64 KB |
| Ordering Designation | XMC1100T016X0064ABXUMA1 (AB step, tape and reel) | XMC1100-T016X0064-AB | XMC1100-T016F0064-AB | XMC1100T016F0016ABXUMA1 | XMC1100T016X0016ABXUMA1 | XMC1100T016X0064AAXUMA1 |
| Product Series / Family | XMC1000 / XMC1100 | XMC1000 / XMC1100 | XMC1000 / XMC1100 | XMC1000 / XMC1100 | XMC1000 / XMC1100 | XMC1000 / XMC1100 |
Ana Farklılayıcılar
- Four times the Flash of the 16 KB sibling in the identical footprint (karşılaştırma:XMC1100T016X0016ABXUMA1)
- Directly pin-compatible ordering alternatives for supply continuity (karşılaştırma:XMC1100-T016X0064-AB)
- 8 analog channels in a 16-pin package (karşılaştırma:STM32G031G6U6TR)
- Flexibility on both 3.3 V and 5 V rails (karşılaştırma:STM8S103F3M6TR)
- Trade-off: limited I/O budget for the smallest board area (karşılaştırma:STM32G031K8T6TR)
Tasarım Notları
Place the supply decoupling capacitor immediately adjacent to the VDD pin and route the ground return through the exposed pad region where the package provides it, keeping the supply loop area as small as possible. Because the PG-TSSOP-16-8 package has a 0.65 mm pitch, place the decoupling capacitor on the same side of the board as the MCU with short via connections rather than routing long traces around the package.
Keep the analog input nets on the dedicated analog pins short and isolated from PWM or timer outputs routed on adjacent port pins. Analog channels on this package sit next to switching-capable port pins, so route digital outputs away from sensor traces, keep a quiet ground reference under the analog section, and terminate unused analog inputs at a defined potential rather than leaving them floating, since a floating input on a 12-bit converter produces unpredictable codes.
Do not assume the family pinout applies to any TSSOP-16 part: the XMC1100 assigns analog channels and alternate peripheral functions within this land pattern, and the datasheet notes that up to seven alternate output functions can be mapped onto a single port pin through the Pn_IOCR port control registers. Configure those registers after reset, verify the resulting function in the register view of your toolchain, and confirm the exact pin functions against the manufacturer pin description table before releasing a layout.
The MCU accepts 3.3 V or 5 V, but a board designed for both ranges still needs headroom for the highest rail and for tolerance. Size the supply for peak processing plus simultaneous peripheral activity rather than average current, and note that a fast GPIO transition on a port pin loaded by an external circuit can dominate the supply transient budget. Confirm the exact current consumption figures in the electrical characteristics section of the manufacturer datasheet for your clock and peripheral configuration.
Uyumluluk Bilgisi
The AB ordering suffix designates the industrial-grade XMC1100 variant rather than an automotive-qualified AEC-Q100 device; the available manufacturer and distributor listings do not state RoHS, REACH, lead-free or conflict-minerals status for this order code, so confirm with Infineon before committing to a regulated design.