XMC4200F64F256ABXQMA1 - 80MHz Cortex-M4 MCU | Infineon
MPN: XMC4200F64F256ABXQMA1 ✓ AktifXMC4200F64F256ABXQMA1 Genel Bakış
A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile working memory, peripherals, and communication interfaces on one integrated circuit. The ARM Cortex-M4 core places the XMC4200 within the hierarchy of 32-bit embedded processors, microcontrollers, and programmable control devices. Its architecture supports efficient event-driven control while providing enough memory for moderate protocol stacks, control logic, and application firmware.
The headline features of the XMC4200F64F256ABXQMA1 are its 80 MHz maximum operating frequency, 256 KB flash memory, and 40 KB SRAM. The 256 KB flash provides nonvolatile storage for firmware and constants, while the 40 KB SRAM supports stack space, working buffers, and real-time data processing. A 1.3 V to 3.3 V operating range accommodates low-voltage digital systems, and the 64-pin LQFP exposed-pad package provides a practical surface-mount option for industrial controller designs.
The XMC4000 architecture is centered on the ARM Cortex-M4 processor and combines embedded control performance with digital peripherals. Operating at up to 80 MHz gives the core additional processing headroom for communications, data acquisition, and supervisory functions. Flash and SRAM capacities should be checked against firmware size, interrupt requirements, and buffering needs before finalizing a design, particularly when an RTOS or multiple communication protocols are planned.
Typical uses include industrial automation controllers, sensor-acquisition systems, motor-control supervisory equipment, building-control interfaces, and connected embedded products. The microcontroller is especially appropriate when a compact 32-bit control platform is needed without moving to a higher-pin-count package. Its 40 KB SRAM is useful for buffered measurements and communication tasks, while 256 KB flash can hold a substantial embedded application.
Designers should use the manufacturer datasheet pin description and exposed-pad connection requirements when laying out the PCB. Place decoupling capacitors close to the supply pins, provide clean grounding around the exposed pad, and program unused pins according to the device recommendations. Confirm startup, clock, reset, and peripheral configurations in the manufacturer reference documentation before production release.
This product page combines the manufacturer’s XMC4200 family specifications with package, memory, and ordering information, then adds practical selection guidance for industrial embedded designs. It also identifies the limitations of drop-in replacement options so engineers can distinguish exact ordering variants from devices that merely appear similar in headline specifications.
Drop-in alternatifler için XMC4200F64F256ABXQMA1 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
XMC4200-F64F256-BA
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XMC4200F64F256ABXQMA1 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Product Series | XMC4000 series |
| Processor Core | ARM Cortex-M4 |
| Instruction Set | 32-bit RISC |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 256 KB (256K x 8) |
| SRAM | 40 KB |
| İşletim Besleme Gerilimi | 1.3 V to 3.3 V |
| Device Type | Industrial microcontroller |
| Paket | PG-LQFP-64-19 |
| Pin Sayısı | 64 pins |
| Package Form | Square LQFP with exposed pad |
| Montaj Türü | Surface mount |
| Terminal Style | Gull wing |
| Shipping Package | Tray |
XMC4200F64F256ABXQMA1 tray Pin Yapısı Kılavuzu
XMC4200F64F256ABXQMA1 (tray paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XMC4200F64F256ABXQMA1.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XMC4200F64F256ABXQMA1 için uygundur 6 uygulamas: Industrial Automation Controller, Sensor Acquisition and Monitoring, Building Control Interface, Connected Equipment Gateway, Motor-Control Supervisor, Battery-Powered Embedded Instrument.
Industrial Automation Controller
The XMC4200F64F256ABXQMA1 fits an industrial automation controller that must combine deterministic control with room for communications and diagnostics. Its ARM Cortex-M4 core operates at up to 80 MHz, while 256 KB of flash stores application firmware and 40 KB of SRAM supports task stacks and working buffers. The 64-pin LQFP package is practical for conventional surface-mount assembly. Design the controller around the confirmed peripheral set and preserve the exposed-pad thermal connection to maintain performance in a densely populated industrial enclosure.
Önerilen
Sensor Acquisition and Monitoring
The XMC4200F64F256ABXQMA1 is suitable for a sensor-acquisition system that must gather measurements, validate them, and publish processed results. Its 40 KB SRAM provides useful working space for sampled data and filtering buffers, while the 80 MHz Cortex-M4 core leaves processing margin for control logic. The 1.3 V to 3.3 V operating range supports integration into low-voltage embedded systems. Engineers should allocate buffers according to the worst-case sample rate and confirm the required analog, timing, and serial-interface resources in the manufacturer documentation.
Önerilen
Building Control Interface
The XMC4200F64F256ABXQMA1 can serve as the central controller for a building-control interface handling sensor inputs, actuator commands, and network traffic. Its 256 KB flash accommodates protocol handlers and application logic, and its 40 KB SRAM supports message queues and temporary status data. The 64-lead LQFP package simplifies inspection and rework compared with very fine-pitch devices. A production design should include brownout-aware startup, bus protection, reliable grounding, and firmware checks that keep each actuator in a defined state during reset or communications loss.
Önerilen
Connected Equipment Gateway
The XMC4200F64F256ABXQMA1 fits a connected equipment gateway that translates between local control functions and a communications network. Its 32-bit Cortex-M4 architecture runs at up to 80 MHz, allowing protocol processing to coexist with supervisory tasks, while 256 KB flash holds gateway firmware and 40 KB SRAM handles active frames. The 64-pin package provides a manageable route count for medium-complexity gateways. Validate clock tolerance, communication timing, and peripheral availability before choosing the final board architecture and connector arrangement.
Önerilen
Motor-Control Supervisor
The XMC4200F64F256ABXQMA1 is appropriate for a supervisory controller in a motor-control system where a dedicated lower-level controller executes timing-critical commutation. The 80 MHz Cortex-M4 core can manage operating modes, fault state machines, communications, and diagnostics, while 40 KB SRAM supports control buffers. Its 64-pin LQFP package allows a practical mixed-signal control board, but the exposed pad and high-current switching stages need careful thermal planning. Confirm timer, capture, and PWM resources against the selected power stage before hardware commitment.
Önerilen
Battery-Powered Embedded Instrument
The XMC4200F64F256ABXQMA1 can serve as the control platform in a battery-powered embedded instrument when low-voltage operation and compact embedded processing are priorities. The 1.3 V to 3.3 V range supports integration with low-energy digital rails, and the 40 KB SRAM can hold live measurement data while the 256 KB flash stores firmware. To extend battery life, use the manufacturer’s clock, sleep, and peripheral-control guidance. Leakage and active-current behavior must be evaluated under the actual load rather than estimated from processor frequency alone.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XMC4200F64F256ABXQMA1 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XMC4200-F64F256-BA |
|---|---|---|
| Package | PG-LQFP-64-19 | PG-LQFP-64-19 |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M4, 32-bit RISC | ARM Cortex-M4, 32-bit RISC |
| Maximum Frequency | 80 MHz | Up to 80 MHz |
| Flash Memory | 256 KB | 256 KB |
| SRAM | 40 KB | 40 KB |
Ana Farklılayıcılar
- Defined 256 KB flash and 40 KB SRAM configuration (karşılaştırma:XMC4200-F64F256-BA)
- 80 MHz Cortex-M4 processing baseline (karşılaştırma:XMC4200-F64F256-BA)
- Identical XMC4200 package family (karşılaştırma:XMC4200-F64F256-BA)
Tasarım Notları
Use the manufacturer’s PG-LQFP-64-19 land pattern and pin-description table when routing the board. Keep the exposed-pad connection, power planes, and decoupling network consistent with the reference design. Place bulk and high-frequency decoupling close to the associated supply pins, and provide a quiet return path for clock and communication signals. Do not derive pad geometry from a generic 64-pin LQFP footprint because exposed-pad and thermal-via requirements differ between packages.
The exposed pad is part of the package thermal and electrical design, not merely a mechanical feature. Connect it according to the manufacturer pin and package guidance, using an appropriate copper area and via arrangement while observing assembly constraints. Estimated junction temperature depends on actual package dissipation, copper area, board construction, and ambient temperature; validate the final thermal design in the assembled enclosure rather than relying on processor frequency alone.
Plan the 1.3 V to 3.3 V supply architecture before placing signal-routing components. Use separate local decoupling paths for analog and digital loads if the selected analog resources require them, and route return currents without crossings through sensitive areas. Confirm startup sequencing, brownout behavior, maximum supply limits, and peripheral-specific supply requirements against the manufacturer electrical characteristics. Include test points for the principal rails to simplify production troubleshooting.
Do not assume that every Cortex-M4 MCU with a 64-lead package is interchangeable. Before replacing XMC4200F64F256ABXQMA1, compare pin functions, exposed-pad treatment, clock limits, memory organization, peripheral assignments, interrupt priorities, startup behavior, and development-tool support. Software migration also requires review of linker configuration, startup code, register definitions, and low-power sequences. A successful compilation alone does not establish hardware or firmware drop-in compatibility.
Uyumluluk Bilgisi
The exact regulatory and environmental declarations for XMC4200F64F256ABXQMA1 were not identified. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral statements for the exact ordering code with Infineon before procurement or production release.