XMC4500E144F1024ACXQSA1 120MHz Cortex-M4 1MB MCU
MPN: XMC4500E144F1024ACXQSA1 ✓ AktifXMC4500E144F1024ACXQSA1 Genel Bakış
The XMC4500 combines an ARM Cortex-M4 processor core with Infineon’s configurable peripheral set. This architecture places a general-purpose microcontroller, memory, communication interfaces, timing resources, and analog or digital peripherals into one device. The 120 MHz execution rate supports demanding control loops and connected industrial equipment, while the 1 MB program-memory capacity allows more application code, configuration data, and protocol stacks to be stored locally.
Key characteristics include 32-bit ARM Cortex-M4 operation at 120 MHz, 1 MB of flash, 160 KB of SRAM, an Ethernet MAC, and a 144-pin LFBGA-144-10 package. The large pin count provides access to the family’s communication, general-purpose I/O, analog, and timing functions. The industrial temperature range makes the device suitable for factory equipment, embedded controllers, communication modules, and connected automation systems.
The device is identified by the Infineon ordering code XMC4500E144F1024ACXQSA1. The XMC4500-E144X1024-AC manufacturer product designation identifies the underlying industrial MCU configuration, while the full ordering suffix identifies the package, temperature, and shipment variant. This distinction matters when comparing distributor records because some listings abbreviate or omit the complete orderable suffix.
XMC4500 controllers are intended for applications where deterministic embedded control and industrial communications are more important than minimizing pin count or package area. The Ethernet MAC enables network-connected equipment, while the Cortex-M4 core supports control software, communication stacks, and supervisory functions. A 144-pin LFBGA also requires careful PCB layout with adequate escape routing, power distribution, and thermal design.
For new designs, use the manufacturer datasheet and product-page ordering information to confirm the exact pin assignment, supported peripherals, electrical limits, and package dimensions. The XMC4500E144F1024ACXQSA1 is a tray-packaged industrial MCU; procurement, stock, and lead-time questions should be directed through the XAIPART Request a Quote form. Engineering decisions should also account for the 3.3 V supply requirement, the 120 MHz operating point, the 144-ball land pattern, and the -40 °C to +85 °C environmental range.
Drop-in alternatifler için XMC4500E144F1024ACXQSA1 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller XMC4500E144F1024ACXQSA1 (aynı form faktörü ve ayağa oturma) — farklı olan Product Type.
XMC4500E144X1024ACXQSA1
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →XMC4500-E144X1024-AC
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
XMC4500E144F1024ACXQSA1 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Series | XMC4000 |
| CPU Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Program Memory | 1 MB flash |
| Program Memory Organization | 1M x 8 |
| SRAM | 160 KB |
| Ethernet Support | Ethernet MAC |
| Besleme Gerilimi | 3.3 V |
| İşletim Sıcaklığı | -40 °C to +85 °C |
| Paket | 144-pin LFBGA |
| Package Designation | PG-LFBGA-144-10 |
| Package Dimensions | 10 mm x 10 mm |
| Montaj Türü | Surface mount |
| Shipping Format | Tray |
| Industrial Positioning | Industrial microcontroller |
| Word Size | 32 bit |
| Application Domain | Industrial embedded control and Ethernet-connected equipment |
XMC4500E144F1024ACXQSA1 10 mm x 10 mm Pin Yapısı Kılavuzu
XMC4500E144F1024ACXQSA1 (10 mm x 10 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: XMC4500E144F1024ACXQSA1.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
XMC4500E144F1024ACXQSA1 için uygundur 6 uygulamas: Industrial Ethernet Controllers, Factory Automation Controllers, Robotics and Motor-Control Systems, Building and HVAC Equipment, Communication Gateways, Embedded Data Acquisition Systems.
Industrial Ethernet Controllers
The XMC4500E144F1024ACXQSA1 fits Ethernet-connected industrial controllers because its ARM Cortex-M4 core runs at 120 MHz while the device includes an Ethernet MAC, 1 MB of flash, and 160 KB of SRAM. The MCU can execute communication stacks, supervisory logic, and real-time control tasks without relying on a separate host processor. The 144-pin LFBGA exposes the family’s broad I/O and peripheral resources, although the board still needs an appropriate Ethernet PHY, magnetic interface, and carefully controlled high-speed layout. The -40 °C to +85 °C rating supports factory-floor equipment where temperature variation and long service intervals are important.
Önerilen
Factory Automation Controllers
The XMC4500E144F1024ACXQSA1 is well suited to factory automation because its 120 MHz Cortex-M4 core provides deterministic processing capacity for motion, sequencing, interlocks, and machine monitoring. Its 1 MB of flash accommodates control firmware, diagnostics, fieldbus or network stacks, and configuration data, while 160 KB of SRAM supports active control loops and communication buffers. The 144-pin LFBGA provides access to the XMC4500 family’s configurable peripherals and general-purpose I/O. Designers should reserve clean supply routing and solid ground distribution because the 3.3 V device combines high-performance logic with many externally accessible signals.
Önerilen
Robotics and Motor-Control Systems
The XMC4500E144F1024ACXQSA1 can coordinate robotics subsystems that require deterministic timing, multiple digital interfaces, and network connectivity. Its 120 MHz Cortex-M4 core can process sensor data, execute motion algorithms, and manage communication concurrently, while the 1 MB flash and 160 KB SRAM provide space for control firmware and working data. The broad 144-pin package makes numerous I/O resources available for encoders, actuators, and machine interfaces. Motor systems still require external power stages, protection, isolation, and careful grounding; the MCU should not directly drive high-power loads.
Önerilen
Building and HVAC Equipment
The XMC4500E144F1024ACXQSA1 suits connected HVAC controllers that combine real-time sensor monitoring, actuator control, configuration storage, and communication. A 120 MHz Cortex-M4 core supports control logic and networking, while 1 MB of flash provides room for firmware, diagnostic data, and protocol handlers. The 160 KB SRAM allows substantial buffering without external memory, and the industrial -40 °C to +85 °C range supports equipment installed in varied ambient conditions. The 144-pin LFBGA requires a high-density board layout with short decoupling paths and controlled return currents around switching or power-conversion stages.
Önerilen
Communication Gateways
The XMC4500E144F1024ACXQSA1 can serve as the processing core of an industrial communication gateway by combining an Ethernet MAC, 120 MHz Cortex-M4 performance, 1 MB of flash, and 160 KB of SRAM. The internal flash is suitable for protocol conversion software, configuration, and diagnostics, while SRAM supports packet buffers and multiple interface stacks. Its 144-pin LFBGA offers a broad set of communications and control pins for adding isolated fieldbus or sensor interfaces. A practical gateway design still needs suitable transceivers, magnetics, surge protection, and isolation, with the MCU positioned as the protocol and supervisory controller.
Önerilen
Embedded Data Acquisition Systems
The XMC4500E144F1024ACXQSA1 supports embedded data-acquisition equipment that must sample inputs, process measurements, and forward results over Ethernet. The 120 MHz Cortex-M4 core provides processing headroom for filtering and control, while the 1 MB flash and 160 KB SRAM support firmware, buffers, and configuration. The XMC4500 family’s configurable peripheral set helps integrate digital I/O and communication resources in one controller, and the industrial temperature range suits laboratory or production equipment. Analog measurement front ends remain external, so the design should isolate sensitive inputs from switching nodes and provide appropriate filtering.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: XMC4500E144F1024ACXQSA1 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | XMC4500E144X1024ACXQSA1 | XMC4500-E144X1024-AC |
|---|---|---|---|
| Manufacturer | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LFBGA-144-10 | PG-LFBGA-144-10 | PG-LFBGA-144-10 |
| CPU Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum Frequency | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB |
| Ethernet MAC | Yes | Yes | Yes |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
Ana Farklılayıcılar
- Integrated industrial Ethernet MAC (karşılaştırma:Generic Cortex-M4 microcontroller without Ethernet MAC)
- Substantial embedded memory for industrial firmware (karşılaştırma:Lower-memory Cortex-M4 microcontroller)
- High pin count for configurable industrial peripherals (karşılaştırma:Compact 32-pin or 48-pin Cortex-M4 device)
Tasarım Notları
Treat the PG-LFBGA-144-10 layout as a high-density escape-routing problem. Place all decoupling capacitors directly at the corresponding 3.3 V supply balls, keep the return path beneath or immediately adjacent to each high-speed trace, and preserve access for X-ray inspection because hidden connections and package warpage can create assembly defects. Use the manufacturer package drawing and land-pattern data for the exact ball map rather than inferring locations from package dimensions.
Separate the MCU’s 3.3 V rail requirements from adjacent analog, communications, and external actuator supplies. Follow the datasheet recommendations for bulk and high-frequency decoupling, provide adequate source impedance at every supply ball, and check total current against the limits for all active peripherals. The 120 MHz Cortex-M4 core can create dynamic current transitions, so a supply stage that is adequate at idle may still require additional local bulk capacitance.
Ethernet and other high-speed interfaces require short, continuous reference planes and carefully controlled impedance. Keep the XMC4500E144F1024ACXQSA1 connection to its Ethernet PHY compact, minimize vias, and separate the digital and analog return currents where the application permits. Confirm clock, reset, and debug trace routing against the Infineon XMC4500 datasheet and the Ethernet PHY vendor’s reference layout.
Do not substitute a part based only on the words Cortex-M4, 1 MB flash, or 144 pins. Verify the complete ordering code, PG-LFBGA-144-10 land pattern, exposed-pad treatment, SRAM capacity, Ethernet MAC implementation, peripheral assignments, temperature grade, and tray packaging. Confirm whether a distributor record uses the abbreviated XMC4500-E144X1024-AC designation or the full XMC4500E144F1024ACXQSA1 suffix before approving a replacement.
Uyumluluk Bilgisi
The exact industrial orderable variant is not identified as an automotive AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the product information and must be confirmed with the manufacturer.