مصنوعات (44,000+)

XC4VFX20-11FF672C - Virtex-4 FX FPGA, 19,224 Cells, 672-BBGA | AMD/Xilinx
XC4VFX20-11FF672C

XC4VFX20-11FF672C - Virtex-4 FX FPGA, 19,224 Cells, 672-BBGA | AMD/Xilinx

The AMD/Xilinx XC4VFX20-11FF672C is a Virtex-4 FX field-programmable gate array with 19,224 total cells, 2,136 logic cells or logic blocks, and a 1,028 MHz internal frequency, packaged in a 672-pin FCBGA. It is manufactured on 90 nm CMOS technology with a 1.2 V core supply and is specified for a 0°C to 85°C operating-temperature range. The -11 suffix identifies the middle Virtex-4 performance grade, positioned between the -12 and -10 speed grades. An FPGA is a programmable digital logic device that allows a system designer to implement combinational and sequential logic, interfaces, processing pipelines, and control functions in a single integrated circuit. Within the semiconductor hierarchy, the XC4VFX20 belongs to the Virtex-4 FX FPGA family, which combines configurable logic resources with large-routing capability for demanding embedded systems. Unlike a fixed-function application-specific integrated circuit, an FPGA allows design changes to be implemented through bitstream programming. Key device attributes include a 320-resource embedded processing-related count shown in the product listing, 1,253,376 in the same listing, and a 672-ball package offering high I/O connectivity. The device supports the -12, -11, and -10 speed grades, with the -12 grade designated for the highest performance. Its CMOS construction and 90 nm process node reflect the technology generation of the Virtex-4 portfolio, while the large FCBGA package supports the substantial interconnect and power requirements of the device. The 672-pin FCBGA footprint requires a multi-layer PCB with dense escape routing and careful power-plane construction. Designers should use the AMD Virtex-4 package pinout files when assigning PCB signals, and should treat power, ground, decoupling, and configuration pins according to the package-specific guidance in the Virtex-4 family documentation. The package provides substantially more interconnect capacity than a leaded package, but it also raises sensitivity to assembly workmanship, solder-paste control, and thermal gradients. Typical applications include telecommunications equipment, industrial control systems, high-speed data processing, network-interface equipment, test and measurement platforms, and embedded control or signal-processing subsystems. In these systems, the device can implement parallel datapaths, protocol interfaces, timing control, and application-specific processing while reducing the number of discrete logic components. When planning a design, verify the selected -11 speed grade against the required internal and I/O timing, confirm that every power rail meets the DC and AC requirements in the family data sheet, and use AMD package pinout files as the authoritative source for board-level connectivity. Because the package is large and fine-pitch, validate the PCB stack-up, escape routing, and assembly process before release. This page combines package, logic-resource, temperature, and technology specifications with family-level design guidance, verified drop-in candidates, and practical PCB considerations that help engineers evaluate the XC4VFX20-11FF672C for a new Virtex-4 design.

RFQ رابطہ
XC4VFX20-11FF672I - Virtex-4 FX FPGA, 672-BBGA | AMD
XC4VFX20-11FF672I

XC4VFX20-11FF672I - Virtex-4 FX FPGA, 672-BBGA | AMD

The AMD Xilinx XC4VFX20-11FF672I is a Virtex-4 FX field-programmable gate array with 19,224 logic cells, 3,136 logic blocks, and a 672-pin FCBGA package. It uses 90 nm CMOS technology, operates from a typical 1.2 V core supply, and is identified in the supplied product records as the -11 speed grade with industrial temperature classification. The device combines programmable logic, block RAM, DSP resources, dedicated input/output, and embedded processing capability in one highly integrated FPGA package. An FPGA is a semiconductor device whose digital function is defined after manufacture by loading a configuration bitstream. The Virtex-4 FX family sits within the broader field-programmable gate array category, alongside programmable logic devices, CPLDs, and ASICs. Unlike a fixed-function ASIC, an FPGA allows engineers to revise logic, interfaces, timing behavior, and parallel processing architectures without changing the PCB. The XC4VFX20-11FF672I is therefore useful when a design needs substantial logic density, multiple dedicated I/O, high-speed fabric, or a configurable mix of hardware processing and external interfaces. Key device characteristics include 90 nm CMOS construction, 19,224 logic cells, 3,136 logic blocks, 2,136 configurable logic blocks as reported in the retrieved specification record, and 672 package pins. The device is identified with a 1.2 V supply and an operating temperature range of 0 to 85 degrees Celsius for the listed -11 industrial version. Its high pin count supports broad connectivity for external memory, clocks, serial links, data converters, and board-level control signals. The XC4VFX20-11FF672I is organized around a programmable fabric with dedicated resources for block RAM, DSP arithmetic, and embedded hard processors. This architecture allows designers to implement parallel datapaths, hardware-assisted control, packet processing, signal conditioning, and interface bridging while maintaining deterministic FPGA timing. The -11 speed grade provides a defined performance class within the Virtex-4 family, while the 672-pin package provides a large number of user I/O and dedicated configuration connections. Typical applications include telecommunications equipment, industrial automation, instrumentation, network appliances, embedded control systems, and high-performance signal-processing platforms. In a communications design, the FPGA can implement parallel packet engines, bus interfaces, and data pipelines. In industrial control, it can combine deterministic machine interfaces with safety monitoring and programmable logic. In test and measurement equipment, dedicated DSP blocks can accelerate filters, transforms, and fixed-point arithmetic. Designers should treat the XC4VFX20-11FF672I as a high-pin-count, high-speed device requiring careful power distribution, decoupling, clocking, and signal-integrity control. The manufacturer’s Virtex-4 package pinout files and DS112 family overview should be used to assign every package ball and confirm board-level connectivity. Configuration storage, startup sequencing, auxiliary supply requirements, and thermal management must be designed together because the 672-pin FCBGA footprint offers limited escape routing around the device. This page combines the exact catalog identity, retrieved specifications, package information, practical application guidance, and qualified drop-in alternatives for engineers evaluating the XC4VFX20-11FF672I. It also highlights the distinction between the industrial -I suffix, the commercial -C suffix, the -G package marking, and the related speed-grade options so that replacement decisions are based on electrical and package compatibility rather than part-number similarity alone.

RFQ رابطہ
XC4VFX20-11FFG672C - 19,224-Cell Virtex-4 FX FPGA | AMD
XC4VFX20-11FFG672C

XC4VFX20-11FFG672C - 19,224-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX20-11FFG672C is a Virtex-4 FX field-programmable gate array with 19,224 configurable logic cells, 2,136 configurable logic blocks, 320 inputs, and 320 outputs in a 672-terminal FCBGA package. It is manufactured on 90 nm CMOS technology and is identified by the -11 speed grade and 0°C to 85°C commercial-temperature designation. The device combines programmable logic, block RAM, DSP resources, and dedicated I/O in a single FPGA package. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after fabrication. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and sits above standard fixed-function logic ICs. Its value comes from combining many configurable logic elements in one device, allowing a board to implement control, signal-processing, interface, and protocol functions without using a large collection of discrete logic circuits. The XC4VFX20-11FFG672C provides a listed maximum clock frequency of 1,181 MHz, while another device summary identifies an internal frequency of 1,028 MHz. Its core supply is listed as 1.2 V, with an operating supply range of 1.14 V to 1.26 V. The -11 speed grade occupies the middle of the available Virtex-4 FX performance grades, which are offered in -12, -11, and -10 versions. The 672-contact package provides 320 configurable I/O, supporting high connectivity for parallel buses, data converters, memory interfaces, and external clocks. The 27 mm by 27 mm S-PBGA-B672 package requires careful high-speed escape routing and a multilayer PCB. Although the underlying silicon supports substantial parallel processing, achievable system performance depends on pin assignment, routing congestion, external memory characteristics, and the selected design tools. Typical uses include telecommunications equipment, industrial control, test and measurement, high-speed signal processing, network infrastructure, and embedded systems with substantial programmable logic. The device is appropriate when fixed logic would be inflexible or uneconomical, especially when interface logic, buffering, state machines, and DSP functions must be combined in a single package. System planning should verify the package pinout, power rails, decoupling, clock topology, and I/O standards before layout. Use the manufacturer package pinout files and datasheet when assigning every one of the 672 terminals, because exposed-pad connections, supply pins, configuration pins, and dedicated user I/O require careful PCB treatment. This product record combines the device specifications, package information, compatible same-family alternatives, and practical engineering guidance to support design evaluation. It also distinguishes the -11 commercial-temperature device from related speed-grade, temperature-grade, and package-ordering variants.

RFQ رابطہ
XC4VFX20-11FFG672I - 19,224 Logic FPGA | AMD
XC4VFX20-11FFG672I

XC4VFX20-11FFG672I - 19,224 Logic FPGA | AMD

The AMD XC4VFX20-11FFG672I is a Virtex-4 FX field-programmable gate array with 19,224 logic cells, 320 I/O, an internal frequency of 1028 MHz, and a 672-ball FCBGA package. Built on 90 nm CMOS technology and specified at 1.2 V, it combines programmable logic, block RAM, DSP processing resources, and selectable I/O in one device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnects can be configured after manufacture. An FPGA belongs to the programmable-logic and CPLD hierarchy, where configurable parallel hardware provides alternatives to using multiple fixed-function logic ICs. The Virtex-4 FX family combines general-purpose logic with dedicated memories and DSP resources for parallel processing, signal generation, and control systems. Principal features of the XC4VFX20-11FFG672I include 19,224 logic cells, 2,136 logic blocks or cells in the source specification, 320 I/O, and a listed internal frequency of 1028 MHz. Its 90 nm CMOS construction and 1.2 V core supply identify it as a high-density programmable logic device intended for designs requiring substantially more parallel capability than a small CPLD. The FCBGA-672 package supports dense board routing but requires careful escape-routing, via, and power-distribution planning. The package is listed with a maximum seated height of 3 mm. Designers must follow the AMD package pinout files when assigning balls, planning power rails, and checking differential or clock-capable I/O constraints before committing a board layout. Typical applications include telecommunications signal processing, industrial control, test and measurement equipment, networking infrastructure, and embedded video processing. Parallel arithmetic, state-machine logic, and dedicated DSP resources can accelerate workloads that would otherwise require several processors or discrete logic devices, while the 320 I/O support substantial board-level connectivity. A critical design consideration is that the -11 suffix identifies the speed grade while the package and ordering suffixes identify package, temperature, and lead-free construction. PCB designers should use the device package files and complete pinout rather than infer BGA connectivity from another Virtex-4 member. Power delivery should also preserve the documented 1.2 V core requirement and provide clean, decoupled supply paths. This product page combines package, logic-capacity, speed-grade, and ordering-code information with practical selection guidance and pin-compatible family comparisons. It is designed to help engineers identify the correct Virtex-4 FX option, plan a 672-ball BGA layout, and evaluate same-footprint alternatives without overlooking temperature-grade or performance differences.

RFQ رابطہ
XC4VFX40-10FF1152I - 41,904-Cell Virtex-4 FX FPGA | AMD
XC4VFX40-10FF1152I

XC4VFX40-10FF1152I - 41,904-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX40-10FF1152I is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 4,656 configurable logic blocks, 448 I/O, and a maximum internal clock frequency of 1028 MHz. It is packaged in a 1152-ball FCBGA and operates from 0 to 85 °C. The -10 suffix identifies its performance grade, while the FF1152 package designation identifies the large ball-grid-array implementation used for high-pin-count FPGA designs. A field-programmable gate array is a programmable digital integrated circuit whose logic, interconnect, and I/O resources can be configured after manufacture. FPGA design is positioned between fixed-function ASICs and software-programmable processors: an ASIC provides the greatest potential efficiency, while an FPGA combines hardware parallelism with the flexibility to revise a design through programmable configuration. The Virtex-4 FX family also provides embedded hard resources for communications-oriented digital systems. Key resources include 41,904 logic cells, 4,656 configurable logic blocks, 448 I/O, 2,654,208 bits of block RAM, and 192 DSP48 slices. These figures allow parallel datapaths, protocol handling, signal processing, and tightly coupled control logic to be consolidated in one device. The 1152-ball package exposes substantially more interconnect and power pins than a lower-pin-count FPGA package, supporting demanding I/O and power-distribution requirements. The device uses advanced CMOS technology and includes programmable logic, block RAM, dedicated multipliers, clock-management resources, SelectIO, and configurable I/O standards. Its 1028 MHz internal-frequency figure identifies the maximum clocking capability associated with the documented device family, while practical system performance also depends on the selected clocking resources, speed grade, routing, memory interfaces, and design timing closure. Typical applications include telecommunications and networking equipment, industrial control, high-performance signal processing, test and measurement, embedded imaging, and communications infrastructure. The large logic and DSP resources suit parallel algorithms, while the 448 I/O provide connections to external memories, transceivers, converters, and clock sources. The Virtex-4 platform is particularly appropriate when a design requires substantially more parallelism than a small microcontroller or FPGA can provide. Board design should treat this 1152-ball package as a high-pin-count BGA requiring careful escape routing, plane-based power delivery, and multilayer construction. Use the manufacturer pinout, package information, and power-guidance documentation when assigning balls, decoupling networks, and voltage rails. Toolchain and device-file compatibility must also be verified before starting a new design or attempting a replacement. This product record combines the exact manufacturer-device identity with verified package, resource, temperature, and distributor-listing details. It also distinguishes true drop-in package options from redesign-level alternatives and highlights the engineering constraints that matter most when sourcing or integrating this legacy FPGA.

RFQ رابطہ
XC4VFX40-10FF672C - 41,904-Cell Virtex-4 FX FPGA | AMD
XC4VFX40-10FF672C

XC4VFX40-10FF672C - 41,904-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX40-10FF672C is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, a -10 speed grade, and a 672-ball FCBGA package. Its 90 nm CMOS construction and 1.2 V internal supply suit high-performance parallel processing, signal processing, communications, networking, industrial control, and test-equipment designs. The device belongs to the FPGA hierarchy: FPGA > programmable logic > reconfigurable digital integrated circuit > semiconductor. An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior are defined by a configuration bitstream after fabrication. Unlike a fixed-function ASIC, an FPGA allows field upgrades, shorter development cycles, and reusable hardware platforms. The Virtex-4 FX family combines configurable logic blocks, dedicated arithmetic resources, block RAM, and selectable I/O standards in a single package. This makes the XC4VFX40 useful when design flexibility and parallel processing matter more than the unit cost of a custom ASIC. The XC4VFX40-10FF672C provides 41,904 logic cells organized into 4,656 configurable logic blocks. Published device information identifies 352 inputs and 352 outputs, a maximum clock frequency of 1028 MHz, and a nominal internal supply of 1.2 V. The -10 designation identifies its speed grade, while the FF672 suffix identifies the 672-ball FCBGA configuration. The device is configured through its configuration architecture and then operates as parallel programmable logic rather than as a conventional fixed-function controller. The principal design consideration is that peak clock capability does not guarantee that every design will close at the same frequency. Timing closure depends on the selected clocking architecture, interconnect demand, memory use, I/O standards, speed grade, and board-level constraints. Pin assignments, differential pairs, power rails, configuration pins, and decoupling requirements must be implemented according to the package and pinout documentation. Because the exact package pin map is not published in the indexed material, engineers should use the official pinout table before assigning a 672-ball PCB. Typical applications include telecommunications line cards, industrial automation controllers, high-speed data acquisition, network packet processing, storage interfaces, and instrumentation. In a parallel filter, the FPGA's configurable logic blocks can implement multiple arithmetic pipelines concurrently, while block RAM can retain samples or lookup data. In communications equipment, selectable I/O and dedicated resources can support high-throughput data paths while retaining the ability to update the bitstream during product maintenance. Power and signal integrity are critical in a 672-ball FCBGA implementation. Follow the manufacturer's recommended power-supply topology and decoupling network, provide a low-impedance reference plane, and keep sensitive configuration and clock routing away from high-slew-rate outputs. Validate BGA assembly, X-ray inspection, and thermal behavior early in the hardware schedule because package complexity can outweigh logic-design effort. This product record combines the exact orderable MPN, package and resource identifiers, family-level technical characteristics, drop-in family variants, application guidance, and design checks. It is structured to help procurement and engineering teams qualify the Virtex-4 FX device while keeping unresolved electrical and pin-level values explicit rather than estimated.

RFQ رابطہ
XC4VFX40-10FF672I - 41,904-Cell 90 nm FPGA | AMD
XC4VFX40-10FF672I

XC4VFX40-10FF672I - 41,904-Cell 90 nm FPGA | AMD

The AMD XC4VFX40-10FF672I is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 90 nm CMOS fabrication, a 1.2 V internal supply, and a 672-BBGA FCBGA package. It is identified by the -10 speed grade and industrial temperature designation while providing high-density programmable logic for communications, industrial control, test equipment, and embedded signal-processing systems. A field-programmable gate array is a semiconductor whose logic, routing, and I/O functions are configured after fabrication. The Virtex-4 FX FPGA belongs to the broader FPGA, programmable-logic, semiconductor, and digital-signal-processing hierarchies. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel processing, control, protocol, and interface logic in one reconfigurable device. The XC4VFX40-10FF672I combines 41,904 logic cells with an internal frequency listed as 1,028 MHz. Its 672-pin FCBGA package supports a high-density connection interface for systems requiring numerous I/O and internal signal routes. The -10 designation identifies its speed grade, while the trailing I identifies the industrial-temperature option. Designers must also account for the package's 1 mm ball pitch and its demanding board-level power, thermal, and signal-integrity requirements. Virtex-4 FX devices are available in -12, -11, and -10 speed grades, with -12 providing the highest performance according to the family documentation. The -10 grade is therefore positioned below the -12 grade in maximum timing performance, but it can satisfy designs that prioritize the -10 grade operating point without requiring the fastest available grade. Final design timing must be checked against the applicable AMD device specifications rather than inferred from the family headline frequency. Typical uses include high-speed data acquisition, industrial automation, communications infrastructure, embedded processing, and test-and-measurement systems. Parallel pipelines are especially suitable because FPGA logic can execute multiple channels or lanes concurrently. The device can combine programmable logic, DSP-oriented processing, memory interfaces, and external I/O while preserving the flexibility of field updates and product-line differentiation. PCB implementation requires careful treatment of the 672-BBGA FCBGA footprint. Power and ground planes should be designed for the device's multi-supply architecture, while decoupling must be placed close to the relevant balls. Full-package escape routing, simultaneous-switching-noise control, and high-speed length matching are necessary to preserve signal integrity. Thermal analysis should use actual utilization, ambient temperature, airflow, and board construction rather than a generic package-power assumption. This product page combines the exact ordering information, package details, architecture description, qualified comparison options, and practical implementation guidance needed to evaluate XC4VFX40-10FF672I for a new FPGA design or an existing Virtex-4 board.

RFQ رابطہ
XC4VFX40-10FFG672C - 41,904-Cell FPGA | AMD | Industrial
XC4VFX40-10FFG672C

XC4VFX40-10FFG672C - 41,904-Cell FPGA | AMD | Industrial

The AMD XC4VFX40-10FFG672C is a Virtex-4 FX field-programmable gate array built on 90 nm CMOS technology, with 41,904 logic cells, 4,656 configurable logic blocks, and 352 user I/O in a 672-pin FCBGA package. The device operates from a 1.2 V core supply, is specified for a 0°C to 85°C temperature range, and belongs to the -10 speed grade. A field-programmable gate array is a semiconductor device whose digital logic, interfaces, and signal processing are configured after manufacture. In the device hierarchy, an FPGA is a programmable logic device, while an FPGA combines programmable logic blocks, programmable I/O, memory resources, clocking, and dedicated fabric into one reconfigurable integrated circuit. The Virtex-4 FX architecture gives engineers a single device for parallel processing, interface bridging, protocol handling, and embedded control without a custom ASIC. Key resources include 41,904 logic cells organized into 4,656 configurable logic blocks. The device provides 352 I/O and uses a 1.2 V supply for its core, while the -10 designation identifies its performance grade. Its 672-pin flip-chip ball grid array supports the high-density pin and routing requirements of the Virtex-4 FX implementation. The 90 nm CMOS process places this device in the mature generation of high-density programmable logic used for communications, industrial control, test equipment, signal processing, and embedded systems. Architecturally, the FPGA supports parallel digital implementation through its configurable logic blocks and routing fabric. This parallelism allows multiple independent channels, protocol engines, or control paths to execute concurrently. The 352-I/O interface provides substantial connectivity, while the large cell count supports designs combining logic, state machines, data alignment, and interface functions. Exact clock, memory, differential-I/O, configuration, and electrical limits should be established from the manufacturer data sheet for the selected board-level implementation. Typical applications include industrial control and automation, communications infrastructure, instrumentation, broadcast video processing, semiconductor test systems, and embedded signal-processing platforms. It is particularly useful when concurrent logic and many external connections are required but the schedule or economics of an ASIC are unfavorable. The device can also support hardware updates because its configuration logic can be reprogrammed rather than permanently masked. Board design must account for the FCBGA package, power distribution, decoupling, configuration storage, clocking, and high-speed routing. Place power and ground connections according to the package and board guidelines in the manufacturer documentation, and validate signal integrity with the selected I/O standards. A prototype or replacement should be checked for device identifier, speed grade, temperature grade, package fit, configuration compatibility, and complete timing closure rather than by package name alone. This product record combines the verified device identity, package and resource summary, family-level replacement context, and engineering selection guidance. It also highlights the practical checks required to migrate a 672-ball Virtex-4 FX design without overlooking configuration, temperature, timing, or PCB-compatibility differences.

RFQ رابطہ
XC4VFX40-10FFG672I - 41,904-Cell Virtex-4 FX FPGA | AMD
XC4VFX40-10FFG672I

XC4VFX40-10FFG672I - 41,904-Cell Virtex-4 FX FPGA | AMD

AMD XC4VFX40-10FFG672I is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 4,656 configurable logic blocks, a 1,028 MHz internal frequency, and a 672-ball FCBGA package. The industrial-temperature grade operates from 0°C to 85°C and combines programmable logic with dedicated DSP, PowerPC 405 processor, and multi-gigabit RocketIO resources. A field-programmable gate array is a semiconductor whose digital architecture is configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, where configurable logic blocks implement Boolean logic, state machines, datapaths, and interface logic. The Virtex-4 FX family adds heterogeneous processing resources so one device can combine parallel logic, DSP pipelines, processor software, and high-speed serial connectivity. The XC4VFX40-10FFG672I provides 352 I/O in a 27 mm by 27 mm FCBGA package and is manufactured using a 90 nm triple-oxide process. Its -10 speed grade, industrial temperature range, and 1.2 V supply identify it for industrial embedded systems requiring substantial logic density in a compact surface-mount device. Two PowerPC 405 processor blocks provide a hard processor subsystem alongside XtremeDSP slices and RocketIO transceivers. The combination of 4,656 configurable logic blocks and dedicated fixed-function resources allows hardware partitioning. General-purpose logic can implement control paths and protocol state machines, while DSP slices handle filters, transforms, and digital signal processing. RocketIO channels support multi-gigabit serial links, and the embedded processor blocks can execute control software or coordinate test and initialization functions. Device configuration is performed through the FPGA configuration architecture rather than a conventional masked ROM program. Typical uses include industrial control and test equipment, high-performance telecommunications, aerospace and defense systems, embedded signal-processing platforms, and network appliances. The device is especially appropriate when a design requires deterministic parallel processing alongside serial connectivity and enough logic capacity for multiple subsystems. Exact transceiver counts, power specifications, configuration interface details, and package thermal data must be confirmed in the AMD Virtex-4 family documentation before schematic release. PCB implementation requires careful power and signal-integrity work around the 672-ball FCBGA. Follow the package ball-assignment, recommended decoupling, and high-speed routing guidance in the family datasheet. Validate the complete power-up sequence and configuration interface on hardware because the industrial-grade FPGA combines multiple supply rails, high-speed I/O, and a large BGA escape requirement. This product record combines device-specific characteristics, family-level architecture, application guidance, and structured alternatives. It also provides the information needed to distinguish exact ordering codes from nearby speed, package, and temperature variants while preserving the critical check that a proposed replacement uses the same 672-ball FCBGA footprint.

RFQ رابطہ
XC4VFX40-11FF1152I - 41904-Cell Virtex-4 FX FPGA | AMD
XC4VFX40-11FF1152I

XC4VFX40-11FF1152I - 41904-Cell Virtex-4 FX FPGA | AMD

AMD XC4VFX40-11FF1152I is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 4,656 configurable logic blocks, 448 I/O, and a maximum internal clock frequency of 1028 MHz. The device is manufactured in 90 nm CMOS technology, operates from a 1.2 V core supply, and is packaged in a 1152-terminal FCBGA. Its -11 speed grade and 0°C to 85°C industrial temperature range support high-performance programmable logic designs requiring substantial parallel processing capacity. A field-programmable gate array is a semiconductor whose digital logic, interconnects, and I/O behavior are configured after fabrication. The FPGA category sits below programmable logic devices and combines configurable logic blocks, block RAM, DSP resources, programmable interconnect, and user I/O in one device. Virtex-4 FX devices combine this general-purpose fabric with embedded processors and high-speed serial transceivers, allowing complex control, datapath, connectivity, and network functions to be integrated in a single package. The XC4VFX40-11FF1152I provides 4,656 configurable logic blocks, 41,904 logic cells, and 448 I/O according to the device listing. Its 90 nm CMOS process supports a 1.2 V core operating supply. A 1028 MHz internal frequency is listed for the -11 grade, while the Virtex-4 family supports -10, -11, and -12 performance grades. The 1152-terminal FCBGA exposes substantially more device interconnect than a typical low-pin-count FPGA package. This device belongs to the Virtex-4 FX platform, which integrates programmable logic with a hard processor subsystem and dedicated serial transceiver resources. That architecture allows designers to implement multi-gigabit interfaces, packet-processing engines, embedded control functions, and parallel datapaths without combining several separate devices. Because FPGA configuration determines routing and logic, timing closure depends on placement, clocking constraints, I/O standards, and the selected implementation toolchain. Typical uses include telecommunications line cards, network switches, packet-processing systems, industrial control platforms, high-speed test equipment, and embedded signal-processing appliances. The 448 I/O and 4,656 configurable logic blocks are particularly useful where parallel interfaces coexist with high-speed serial links. Designers should also account for the memory, transceiver, and I/O capabilities required by the selected Virtex-4 FX device rather than evaluating logic cells alone. Power and signal-integrity planning are critical for a 1152-terminal FCBGA implementation. Follow the AMD/Xilinx PCB design guidance for power-plane distribution, decoupling, ball escapes, and high-speed layer transitions. Confirm that every power rail, decoupling capacitor, configuration interface, and I/O standard in the schematic matches the device pinout and board constraints before fabrication. This product record combines device specifications, temperature-grade and speed-grade distinctions, verified drop-in candidates, and practical selection guidance. It also highlights where a direct PCB substitution can retain the package while changing performance grade, industrial temperature coverage, or configuration-device suffix, allowing procurement and engineering teams to assess each transition explicitly.

RFQ رابطہ
XC4VFX40-11FF672I - 90nm Virtex-4 FX FPGA | AMD
XC4VFX40-11FF672I

XC4VFX40-11FF672I - 90nm Virtex-4 FX FPGA | AMD

The AMD XC4VFX40-11FF672I is a Virtex-4 FX field-programmable gate array built on a 90 nm CMOS process, with 4,656 logic cells and a listed internal frequency of 1,028 MHz. It is offered in a 672-pin FCBGA package measuring 27 mm by 27 mm, with an operating-temperature range of 0°C to 85°C. The -11 suffix denotes the device speed grade, while the final I identifies the specified temperature class. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. FPGA devices sit within the broader programmable-logic hierarchy alongside CPLDs, and are used when designers need parallel processing, flexible interfaces, high-speed serial connectivity, or application-specific hardware acceleration. The Virtex-4 FX platform combines general-purpose logic resources with integrated capabilities intended for demanding embedded, communications, and signal-processing systems. The XC4VFX40 family provides 4,656 logic cells in the configuration listed for this device. Its CMOS implementation supports a 1.2 V core supply, while user I/O and auxiliary supply requirements are defined by the family documentation. The 672-pin FCBGA package provides a substantial connection count for external memory, parallel buses, clocks, configuration signals, and high-speed I/O. The reported 1,028 MHz internal frequency represents a device-level performance figure rather than a guarantee that every I/O interface can operate at that frequency. Configuration and system integration are central to this device’s implementation. Designers must observe the power sequencing, configuration-interface, clocking, decoupling, and I/O-standard requirements in the AMD Virtex-4 family documentation. A 27 mm by 27 mm BGA also demands careful PCB planning because solder escape routing, thermal management, and assembly process controls become more restrictive as pin pitch decreases. Typical applications include telecommunications equipment, industrial control, test and measurement, high-speed communications, embedded signal processing, and custom accelerator logic. The large FCBGA package is most appropriate for systems that can support a complex multilayer PCB and controlled assembly process rather than low-complexity prototype boards. The principal design trade-off is capability versus implementation effort. This FPGA offers substantial programmable logic and a high pin count, but requires careful BGA layout, robust multi-rail power delivery, thermal analysis, and validated configuration logic. Verify all speed-grade, temperature, voltage, and package details before releasing a production PCB. This page combines device-level specifications, engineering guidance, application analysis, and same-footprint upgrade options to support FPGA selection and board design. It also highlights where changes in speed grade, temperature class, or package marking affect replacement decisions.

RFQ رابطہ
XC4VFX40-11FFG672C - 41,904-Cell Virtex-4 FX FPGA | AMD
XC4VFX40-11FFG672C

XC4VFX40-11FFG672C - 41,904-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX40-11FFG672C is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 90 nm CMOS technology, a 1.2 V core supply, and 672-ball FCBGA packaging. The -11 speed grade supports general-purpose programmable-logic and signal-processing designs, while the FX architecture integrates programmable logic with dedicated hardware resources for demanding embedded systems. A field-programmable gate array is a semiconductor device whose digital circuits are configured after fabrication. An FPGA belongs to the programmable-logic hierarchy and provides configurable logic, block RAM, digital signal processing resources, and programmable I/O in one integrated device. Compared with a fixed-function application-specific integrated circuit, an FPGA allows design revisions to be implemented by loading a new bitstream rather than fabricating a new ASIC. The XC4VFX40 provides 41,904 logic cells and 352 dedicated multipliers according to the AMD Virtex-4 family documentation. Its 90 nm CMOS process and 1.2 V operating core voltage place it within the Virtex-4 generation of Xilinx/AMD FPGAs. The 672-BBGA package supports high-density board integration, and the suffix “C” identifies the commercial-temperature product grade. The package is offered as FCBGA, also described in distributor catalogs as a 27 mm by 27 mm, 672-ball package. The FX family combines configurable logic with dedicated DSP blocks for filtering, transforms, and fixed-point arithmetic. Designers can partition an application among programmable logic, DSP slices, block RAM, and external memory interfaces rather than using separate fixed-function devices for every function. The -11 grade provides a distinct speed option within the Virtex-4 portfolio, and exact clock, I/O, and memory-interface limits should be selected from the family data sheet for the intended design. Typical uses include industrial control and automation, high-speed data acquisition, communications infrastructure, test and measurement, embedded signal processing, and prototype systems requiring substantial parallel logic. The same device family can implement control logic, hardware video or packet processing, and DSP pipelines when system timing, memory bandwidth, and I/O requirements remain within the device limits. PCB design must account for the 672-ball package, its 1 mm ball pitch, separate supply requirements, and high-speed routing constraints. Use the AMD package documentation and pinout files to assign balls, connect all required power and ground rails, and implement the recommended decoupling, configuration, clock, and differential I/O layouts. Existing Vivado or ISE designs must be checked against the exact device identifier before recompilation. This product record combines the exact device identity, family characteristics, package information, drop-in family alternatives, and practical selection guidance. The comparison table highlights where speed grade, temperature grade, or logic density changes affect substitution, while the design notes focus on footprint compatibility, configuration, signal integrity, and power integrity.

RFQ رابطہ
XC4VFX40-11FFG672I - Virtex-4 FX FPGA, 41904 Logic Cells | AMD
XC4VFX40-11FFG672I

XC4VFX40-11FFG672I - Virtex-4 FX FPGA, 41904 Logic Cells | AMD

The Advanced Micro Devices, Inc. XC4VFX40-11FFG672I is a Virtex-4 FX field-programmable gate array with 41,904 logic cells, 4,656 configurable logic blocks, and 352 user I/O in a 672-ball FCBGA package. The -11 speed grade operates with a 1.2 V core supply, making it a general-purpose programmable-logic device for demanding embedded, telecommunications, networking, and signal-processing systems. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the FPGA hierarchy, the Virtex-4 FX family combines general-purpose programmable logic with high-speed serial transceivers and selectable DSP resources. The XC4VFX40 is positioned for designs that require substantially more parallel processing capacity than a small microcontroller or CPLD while retaining deterministic hardware-level timing. Key characteristics include a 4,656-CLB logic fabric, 41,904 logic cells, and 352 I/O. The -11 suffix identifies the device's performance grade within the Virtex-4 family, where -12 is the highest speed grade and -10 is the lowest. The FFG672 package designation identifies a 672-ball fine-pitch BGA construction, and a 27 mm by 27 mm body with 1.00 mm terminal pitch supports dense board-level integration. The device uses CMOS technology and includes dedicated clocking, block RAM, and DSP capabilities for parallel data processing. Its internal clock figure is listed as 1,028 MHz, although achievable system clocking depends on the selected logic path, I/O standard, speed grade, device utilization, timing constraints, and power or temperature conditions. Typical applications include telecommunications line cards, network interface controllers, industrial protocol bridges, video and image-processing pipelines, radar or signal-processing modules, and high-throughput embedded control. These designs benefit from parallel datapaths, abundant configurable logic, and deterministic hardware implementation rather than software-driven sequential execution. PCB implementation requires careful power-plane segmentation, controlled-decoupling via via stitching, and pin-aware escape routing from the fine-pitch BGA. Because this is a high-pin-count device, use the AMD package pinout files and device-specific design guidance to assign every ball, power rail, configuration signal, and transceiver connection. This page consolidates device specifications, package details, lifecycle considerations, comparison points, and practical implementation guidance into a single engineering reference for the XC4VFX40-11FFG672I.

RFQ رابطہ
XC4VFX60-10FF672C - 56,880-Cell Virtex-4 FX FPGA | AMD
XC4VFX60-10FF672C

XC4VFX60-10FF672C - 56,880-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX60-10FF672C is a Virtex-4 FX field-programmable gate array containing 56,880 logic cells in a 672-pin FCBGA package. The device provides 25,280 adaptive logic modules, 6,320 configurable logic blocks, a -10 speed grade, and operation from a 1.2 V core supply. Its programmable architecture combines configurable logic, block RAM, DSP48 processing resources, dedicated I/O, and high-speed serial connectivity for parallel processing, communications, control, and embedded systems. An FPGA is a semiconductor whose digital circuit is configured after manufacture through a programmable bitstream. Within the product hierarchy, the XC4VFX60 belongs to the Virtex-4 FX FPGA family, which combines general-purpose programmable logic with parallel processing, block memory, DSP48 arithmetic resources, and dedicated I/O. Compared with a fixed-function ASIC, an FPGA permits logic, interfaces, and signal-processing behavior to be revised through configuration rather than a redesigned silicon mask. Key characteristics include 56,880 logic cells, 25,280 adaptive logic modules, and 6,320 configurable logic blocks. The -10 designation identifies the device speed grade, while the 672-ball FCBGA package supports dense connection to surrounding PCB layers. Its 1.2 V core voltage supports the performance and power characteristics associated with the Virtex-4 generation, while programmable I/O and dedicated high-speed interfaces allow system-specific communication paths to be implemented in the device. The architecture is intended for designs requiring substantial parallel throughput rather than sequential instruction throughput. Configurable logic blocks and adaptive logic modules can implement datapaths, protocol engines, state machines, and control logic concurrently. Block RAM supports on-chip buffering and storage, while DSP48 resources accelerate arithmetic operations such as filtering, transforms, and fixed-point signal processing. Dedicated I/O and serial resources can reduce the external component count when the required interfaces are supported by the selected device configuration. Typical uses include telecommunications line-card control, industrial automation, high-speed instrumentation, network packet processing, defense and aerospace control systems, and embedded signal-processing platforms. A Virtex-4 FX implementation can consolidate parallel logic and DSP functions into one programmable device while preserving the ability to update the bitstream during product development. Exact I/O standards, transceiver features, clocking requirements, and board-level power sequencing should be confirmed against the Virtex-4 family documentation before schematic capture. The principal design consideration is the BGA implementation. A 672-ball FCBGA requires a dense multilayer PCB, exact ball assignments, controlled escape routing, and careful power and ground distribution. The device also requires multiple supply rails, decoupling, clocking, configuration memory, and a valid startup sequence. Thermal performance depends on the FPGA utilization, switching activity, supply voltage, board construction, airflow, and the thermal design of the assembled system rather than on the package name alone. This product record combines device identity, package information, programmable-logic capacity, replacement options, comparison parameters, and practical PCB guidance. It is intended to accelerate sourcing and engineering decisions while keeping mechanical, thermal, configuration, and power-supply checks tied to the original manufacturer documentation.

RFQ رابطہ
XC4VFX60-10FF672I - 56,880-Cell Virtex-4 FX FPGA | AMD
XC4VFX60-10FF672I

XC4VFX60-10FF672I - 56,880-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX60-10FF672I is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 352 user I/Os, a 1.2 V core supply, and 90 nm process technology in a 672-pin FCBGA package. The -10 speed grade provides a distinct performance option for systems requiring predictable timing in logic-intensive embedded designs. Its integrated Virtex-4 FX architecture combines programmable logic with dedicated hardware resources for high-throughput signal processing and general-purpose parallel processing. A field-programmable gate array is a semiconductor whose digital functions are configured after manufacture using a programmable interconnect and configurable logic resources. Within the product hierarchy, an FPGA belongs to programmable logic devices, sits alongside CPLDs, and is implemented as a highly parallel digital semiconductor. Compared with a fixed-function ASIC, an FPGA permits design revisions, adaptable hardware behavior, and faster deployment of complex control, signal-processing, and communications systems. The XC4VFX60-10FF672I combines 56,880 logic cells with 352 user I/O pins in one compact 672-pin FCBGA. The specified 1.2 V core voltage supports low-voltage operation, while the 90 nm fabrication technology reflects the device's period in high-density programmable-logic development. Its 352 I/Os make the device suitable for parallel data acquisition, industrial control, communications infrastructure, embedded vision, and defense or aerospace systems where deterministic parallel processing and substantial external connectivity are valuable. The Virtex-4 FX architecture provides a unified structure of configurable logic, block RAM, dedicated DSP arithmetic, and hard processor resources. This combination allows designers to accelerate data-intensive operations in hardware while retaining programmable control paths. Exact block-RAM, DSP, processor, clock, and I/O performance figures are not stated in the product listing, so engineers should confirm those device-specific limits in the AMD Virtex-4 family documentation before finalizing a clocking, memory, or power budget. Typical implementations include telecom line cards, industrial automation controllers, high-speed measurement systems, radar and signal-processing front ends, network packet processors, and embedded test equipment. The 352 I/O count supports broad parallel interfaces, while the 56,880-cell fabric can host control logic, datapaths, protocol engines, and fixed-point or floating-point processing functions. Designs requiring external processors can also use the integrated hardware resources for tightly coupled accelerator tasks. PCB implementation is the main practical consideration for this 672-pin FCBGA. Power, ground, decoupling, configuration, clock, and high-speed I/O routing must follow the AMD package pinout and PCB design guidance. Differential pairs should use controlled geometry and matched reference planes, while bypass capacitors should connect to the appropriate power and ground planes with very short return paths. Configuration completion and system reset sequencing also require validation before field deployment. This product record combines the exact 56,880-cell, 352-I/O, 1.2 V, 90 nm, 672-FCBGA attributes with same-package speed and temperature alternatives, application guidance, and implementation-focused design notes. It is intended to help engineers identify the correct Virtex-4 FX configuration, verify footprint and lifecycle constraints, and plan a robust implementation before requesting a quotation.

RFQ رابطہ
XC4VFX60-10FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD
XC4VFX60-10FFG672C

XC4VFX60-10FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX60-10FFG672C is a Virtex-4 FX field-programmable gate array with 56,880 configurable logic cells, 352 I/O positions, 90 nm process technology, and a 1.2 V core supply, housed in a 672-pin FCBGA package. The -10 speed grade targets general-purpose designs requiring a balance of logic density, embedded memory, DSP processing, and programmable I/O. A field-programmable gate array is a semiconductor device whose digital logic, memory, signal processing, and I/O functions are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, block RAM, dedicated DSP resources, and selectable I/O standards. This combination allows complex digital systems to be implemented in a compact, reconfigurable device instead of a custom ASIC. The XC4VFX60-10FFG672C provides 56,880 logic cells and 352 I/O positions according to the AMD Virtex-4 family documentation. Its 90 nm fabrication technology supports a 1.2 V operating core, while the FCBGA-672 package provides the board-level connection density required for high-speed parallel interfaces and mixed signal-processing designs. The device belongs to the FX family, which adds programmable DSP resources for filtering, transforms, and other arithmetic-intensive operations. The -10 designation identifies the device speed grade, allowing designers to select a predictable timing-performance level for designs operating within the supported clock and I/O constraints. Configuration and programming are handled through the FPGA configuration architecture, allowing the same board design to support multiple bitstreams or field upgrades when the host system provides the required configuration memory and control logic. Typical applications include industrial control, communications infrastructure, instrumentation, test and measurement, embedded imaging, and high-throughput signal processing. The 352 I/O positions are especially useful where parallel data paths, memory interfaces, clock distribution, and multiple external buses must coexist within a single programmable device. The dedicated DSP resources can accelerate filtering and arithmetic operations without requiring a separate fixed-function processor. Board design should preserve the voltage, decoupling, clock, and high-speed routing requirements associated with a 672-pin FCBGA. Pin assignment, differential-pair constraints, power-plane planning, and package-specific escape routing must be checked against the official Virtex-4 package pinout files before layout release. This page combines package, pricing, lifecycle, alternative-device, and application guidance with practical migration considerations for engineers evaluating the XC4VFX60-10FFG672C or planning a controlled transition to a compatible Virtex-4 FX device.

RFQ رابطہ
XC4VFX60-10FFG672I - 56,880-Cell FPGA with 352 I/O | AMD
XC4VFX60-10FFG672I

XC4VFX60-10FFG672I - 56,880-Cell FPGA with 352 I/O | AMD

The AMD XC4VFX60-10FFG672I is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 352 user I/Os, and a 672-ball FCBGA package. Fabricated using 90 nm CMOS technology with a 1.2 V core voltage, it combines programmable logic, block RAM, hard processor cores, and high-speed serial transceivers on one semiconductor device. A field-programmable gate array is a semiconductor device whose digital logic is configured after fabrication. An FPGA belongs to the broader programmable-logic hierarchy, alongside CPLDs, and its internal configurable logic blocks, routing fabric, memory, input/output resources, embedded processors, and transceivers can be adapted to many system functions. Unlike a fixed-function ASIC, an FPGA permits design revisions to be implemented by replacing the configuration bitstream rather than fabricating a new chip. The Virtex-4 FX device provides 6,320 configurable logic blocks and 4,276,224 total RAM bits within the 56,880-cell logical resource count. Its 352 user I/Os support board-level connectivity, while the integrated dual PowerPC 405 processor cores provide embedded processing resources. Up to 16 RocketIO transceivers support serial data rates from 622 Mb/s to 6.5 Gb/s, making the device suitable for communications, networking, industrial control, test equipment, and embedded processing systems. The -10 suffix identifies a supported device speed grade for this family, while the FFG672 portion identifies the 672-ball FCBGA package arrangement. This package provides 352 user I/Os and occupies a 27 mm by 27 mm area. The device combines substantial fixed-function hardware with a large programmable fabric, allowing parallel datapaths, protocol bridges, control logic, and hardware acceleration to share the same FPGA rather than requiring separate devices for each function. Typical applications include serial network interfaces, telecommunications line cards, industrial controllers, instrumentation platforms, storage systems, and embedded communications equipment. RocketIO channels can handle high-speed serial links, the PowerPC 405 cores can execute supervisory software, and the programmable I/O can connect external memories and peripherals. System partitioning should account for the fixed silicon resources and the bandwidth available through the routing fabric. PCB implementation requires a high-density, multilayer FCBGA layout with carefully controlled power, ground, and high-speed routing. Follow the AMD package pinout files for ball assignments and escape routing. Decoupling, via-in-pad construction, layer transitions, and differential-pair geometry should be reviewed against the applicable device implementation guidance before fabrication. This product page combines the device’s documented resource counts, package information, speed-grade references, and board-level implications into an engineering-focused selection guide. It also distinguishes same-footprint family alternatives and identifies where a new FPGA platform may provide a longer product roadmap than this mature Virtex-4 FX design.

RFQ رابطہ
XC4VFX60-11FF1152C - 56,880-Cell FPGA with 16 RocketIO | AMD
XC4VFX60-11FF1152C

XC4VFX60-11FF1152C - 56,880-Cell FPGA with 16 RocketIO | AMD

AMD XC4VFX60-11FF1152C is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 6,320 configurable logic blocks, 1,181 MHz internal frequency, and a 1,152-pin FCBGA package. It combines programmable logic with two embedded PowerPC 405 processor cores and 16 RocketIO multi-gigabit transceivers for high-speed embedded and serial-interface designs. A field-programmable gate array is a semiconductor whose digital logic, interfaces, and signal processing can be configured after manufacture. FPGA belongs to the programmable-logic hierarchy, combining parallel logic elements, block RAM, programmable input/output, dedicated processing cores, and high-speed serial transceivers. This integration allows one configurable device to implement control logic, protocol bridges, packet processing, and embedded software tasks without relying on several separate components. The XC4VFX60-11FF1152C uses 90 nm CMOS fabrication and a 1.2 V supply. Its 56,880 logic cells and 6,320 CLBs provide substantial capacity for telecommunications, industrial control, test equipment, networking, and high-speed embedded systems. The -11 speed grade identifies the device's performance class, while the 1,152-ball FCBGA package supports the dense pin and power-distribution requirements of this large Virtex-4 FX implementation. Two embedded PowerPC 405 cores provide a hardware platform for real-time control, protocol handling, and application-specific processing. Sixteen RocketIO transceivers support high-speed serial links, reducing the need for external line drivers and receivers in suitable point-to-point designs. The combination of parallel programmable logic, processors, and serial transceivers is the central architectural advantage over a conventional ASIC-only or smaller FPGA-only implementation. Typical uses include telecommunications line-card control, network-interface and packet-processing modules, industrial automation controllers, high-speed test systems, embedded communications equipment, and aerospace or defense programs requiring a combination of parallel logic and serial connectivity. Because the device is a mature Virtex-4 FX member, engineers should confirm tooling, design support, and availability before beginning a new production design. PCB implementation requires careful treatment of the 1,152-ball FCBGA footprint, power delivery, thermal management, and high-speed signal integrity. Follow the AMD package and pinout files for ball assignments, and preserve the power and ground-plane structure specified by the device documentation. Configuration-bitstream integrity and sequencing should also be verified before field deployment. This product record combines the device's published architecture, package characteristics, cross-reference options, and practical implementation considerations. It also highlights the distinctions among speed-grade and temperature-ordering variants, helping engineers determine whether a candidate is a true PCB-compatible replacement rather than merely a similar FPGA.

RFQ رابطہ
XC4VFX60-11FF672C - 56,880 Logic Cells FPGA | AMD
XC4VFX60-11FF672C

XC4VFX60-11FF672C - 56,880 Logic Cells FPGA | AMD

The AMD XC4VFX60-11FF672C is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, a -11 speed grade, and a 672-pin flip-chip ball grid array package. The device is manufactured on 90 nm CMOS technology and operates from a nominal 1.2 V core supply, making it suitable for high-density programmable logic, high-speed connectivity, and embedded processing systems. A field-programmable gate array is a semiconductor device whose digital logic, interfaces, and other configurable circuits are programmed after manufacture. Within the FPGA hierarchy, the Virtex-4 FX platform combines programmable logic, block RAM, DSP resources, and high-speed serial connectivity in one device. This combination allows complete digital subsystems to be integrated on a single FPGA rather than assembled from separate programmable and fixed-function components. The XC4VFX60 provides 6,320 configurable logic blocks and 56,880 logic cells. Its -11 designation identifies the device performance grade, while the FF672 package exposes 352 user input/output positions according to the manufacturer listing. SelectIO resources support multiple standards, and the device includes LVCMOS drive-strength options of 2, 4, 6, 8, 12, or 16 mA. These resources support communication, control, storage, and specialized signal-processing interfaces. The FPGA is built on 90 nm CMOS and operates around a nominal 1.2 V supply. Its family architecture includes logic cells, block RAM, DSP48 processing elements, and high-speed serial transceiver resources. A maximum clock frequency of 1,181 MHz is reported for this device family, while exact timing limits remain design- and tool-version-dependent. Designers should use the Virtex-4 timing models and implementation tools for final sign-off rather than treating the maximum figure as a guaranteed operating frequency. Typical applications include industrial control, test and measurement, communications infrastructure, high-speed data acquisition, signal processing, and embedded systems. The integrated DSP and memory resources allow filters, transforms, packet processing, and control logic to share one programmable platform. The large I/O count also makes the device useful for parallel interfaces, custom accelerator boards, and legacy system expansions requiring a high pin count. Implementation requires a 672-ball PCB footprint with careful power, ground, decoupling, and high-speed routing. The exposed package demands a thermal strategy appropriate to the board stack-up and enclosure. Differential and high-speed signals require controlled impedance, while unused inputs must be connected according to the Virtex-4 design guidelines. Configuration, clocking, power sequencing, and JTAG debugging must follow the family architecture documentation. This page combines device specifications, same-package alternatives, application guidance, comparison parameters, and practical PCB considerations. The alternatives are distinguished by temperature grade, speed grade, or ordering code rather than by functional equivalence. Engineers should confirm package markings, timing behavior, temperature requirements, and bitstream compatibility before approving any substitution.

RFQ رابطہ
XC4VFX60-11FF672I - Virtex-4 FX FPGA, 56880 Logic Cells | AMD
XC4VFX60-11FF672I

XC4VFX60-11FF672I - Virtex-4 FX FPGA, 56880 Logic Cells | AMD

The AMD XC4VFX60-11FF672I is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 6,320 configurable logic blocks, 352 user I/Os, and a maximum internal frequency of 1181 MHz. The device is supplied in a 672-pin FCBGA package and uses CMOS technology with a 1.2 V nominal supply. It is designed for high-performance programmable logic, embedded processing, networking, telecommunications, and signal-processing systems. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and input/output behavior are configured after manufacture. The Virtex-4 FX architecture combines programmable logic resources with dedicated hardware blocks for high-speed serial connectivity and embedded processing, allowing complex systems to be consolidated into a single device. This FPGA belongs to the Virtex-4 family, which uses 90 nm CMOS technology and is organized around configurable logic blocks, block RAM, dedicated multipliers, and GTP serial transceivers. Key device characteristics include 56,880 logic cells, 6,320 CLBs, 352 user I/Os, and 16 GTP transceivers in the FF672 package. The -11 speed grade provides a maximum internal frequency of 1181 MHz. The device operates from a 1.14 V to 1.26 V supply range with a nominal 1.2 V core voltage, and its specified operating temperature range is 0 °C to 85 °C. The FF672 package supports 352 user I/Os, making it suitable for designs that require substantial parallel connectivity but do not need the 576 user I/Os available in the larger FF1152 package. The FF672 footprint is compatible with other Virtex-4 FX devices in the same package family, including the XC4VFX40 and XC4VFX20, which can support upgrade paths where the required logic and I/O resources remain available. Typical applications include high-speed network interface equipment, telecommunications backplanes, industrial control systems, test and measurement instrumentation, storage controllers, defense and aerospace electronics, and embedded signal-processing platforms. The device is useful when design flexibility, parallel interface density, and dedicated serial connectivity are needed in one programmable component. For PCB design, follow the Virtex-4 FPGA PCB Designer's Guide and the package pinout files from AMD. Decoupling, power-plane distribution, thermal management, and high-speed routing must be planned around the selected speed grade and clocking architecture. Because the package exposes a large BGA land pattern, assembly inspection and adequate thermal spreading are especially important. This page combines device specifications, package details, compatible same-family options, comparison parameters, and application guidance to support component selection and hardware design planning.

RFQ رابطہ
XC4VFX60-11FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD
XC4VFX60-11FFG672C

XC4VFX60-11FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD

The AMD XC4VFX60-11FFG672C is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 6,320 configurable logic blocks, a maximum clock frequency of 1,181 MHz, and a 672-ball FCBGA package. The commercial-temperature suffix C identifies the device as the 0°C to 85°C grade, while the -11 designator identifies its performance class. An FPGA is a semiconductor whose digital logic, interfaces, and signal-processing blocks are configured after manufacture. The Virtex-4 FX family combines configurable logic blocks with dedicated processing, memory, clocking, and high-speed serial resources. This hierarchy places the XC4VFX60 in the FPGA and CPLD category, where parallel programmable logic, embedded hard processors, and high-speed I/O can support complete digital subsystems on one device. Key resources include 4,276,224 RAM bits, two embedded PowerPC 405 processor cores, and as many as 16 RocketIO multi-gigabit transceivers. The device provides 352 user I/Os and operates from a nominal 1.2 V core supply, with a reported range of 1.14 V to 1.26 V. These resources make the FPGA suitable for parallel data processing, embedded control, telecommunications, industrial equipment, and high-speed serial interfaces. The Virtex-4 FX architecture is implemented on 90 nm copper CMOS technology. Its combination of 6,320 configurable logic blocks and hard processor cores allows designers to partition a design between programmable logic and dedicated embedded processing. The 1,181 MHz figure is the maximum internal clock stated for this family, rather than a guarantee that every design or I/O interface will operate at that rate. Typical applications include telecom line cards, industrial control systems, network interface equipment, high-speed protocol bridges, embedded processors, and test systems requiring substantial parallel logic. The 672-ball FCBGA also provides a large pin count for high-speed differential pairs, memory connections, clocks, and programmable I/O. The number of available RocketIO channels depends on the selected device, package, pin configuration, and design constraints. Designers should verify the exact bank voltages, pin assignments, configuration requirements, and differential I/O rules against the AMD package pinout files before layout release. A 27 mm by 27 mm BGA requires careful escape routing, adequate via access, and a thermal design that accounts for the concentration of power and ground balls beneath the device. This page combines the device architecture, package characteristics, configuration guidance, drop-in family alternatives, and application-oriented design notes. It also provides search-focused technical comparisons for engineers evaluating PCB reuse, speed-grade substitution, temperature-grade substitution, and FPGA resource planning.

RFQ رابطہ
XC4VFX60-11FFG672I - 672-Ball Virtex-4 FX FPGA | AMD
XC4VFX60-11FFG672I

XC4VFX60-11FFG672I - 672-Ball Virtex-4 FX FPGA | AMD

The AMD XC4VFX60-11FFG672I is a Virtex-4 FX field-programmable gate array built on 90 nm CMOS technology and packaged in a 672-ball FCBGA. It provides 56,880 logic cells, 352 user I/O, an operating temperature range of 0 C to 85 C, and an internal frequency listed at 1181 MHz. The device also includes 6,320 logic blocks and operates from a 1.2 V core supply. A field-programmable gate array, or FPGA, is a reprogrammable semiconductor used to implement digital logic, control systems, signal processing, and hardware acceleration. An FPGA sits between fixed-function ASICs and software processors: its parallel configurable architecture can execute multiple tasks concurrently, while its logic, block RAM, DSP resources, processors, and transceivers are configured through programmable logic rather than fixed masks. The Virtex-4 FX platform combines substantial programmable logic capacity with hard processor and transceiver capabilities. The XC4VFX60-11FFG672I is suited to embedded systems, digital signal processing, and high-speed communication designs. Its 352 I/O provide external interfaces for control, data capture, memory, clocks, and serial links, while the 56,880-cell fabric supports parallel datapaths and high-throughput state machines. The -11 designation identifies the middle speed grade in a family also offered in -12 and -10 grades, according to the Virtex-4 family literature. The I suffix identifies the industrial temperature option, and the FFG672 package designation identifies the 672-ball package. Package pin assignment must be taken from the AMD Virtex-4 package pinout files because a full 672-ball map is not reproduced in the component listing. Typical deployments include industrial control equipment, telecommunications infrastructure, instrumentation, video processing, radar and signal-processing subsystems, and embedded communications platforms. Engineers should use the AMD package pinout file when assigning PCB tracks and confirm the selected device, package code, and temperature grade before releasing a layout. This page consolidates device specifications, qualified package information, practical design guidance, and same-package upgrade options. It also compares the -11 device with other Virtex-4 FX speed grades and the XC4VFX40, helping engineers separate genuine drop-in choices from options that require a different package or device density.

RFQ رابطہ
XC4VLX15-10FF668C - 13,824-Cell FPGA | AMD | Logic
XC4VLX15-10FF668C

XC4VLX15-10FF668C - 13,824-Cell FPGA | AMD | Logic

The AMD XC4VLX15-10FF668C is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O, and a 668-ball FCBGA package. The device is manufactured in 90 nm CMOS technology, operates from a 1.2 V core supply, and is identified as a -10 speed-grade component with a listed maximum operating frequency of 1028 MHz. A field-programmable gate array is a programmable digital logic device. It belongs to the FPGA and CPLD hierarchy and ultimately to the broader semiconductor and digital-logic categories. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable I/O, and internal routing resources. This architecture allows a board to be adapted, revised, or expanded by loading a different bitstream rather than changing the integrated circuit. The XC4VLX15-10FF668C provides 13,824 logic cells and 320 I/O in a 668-BBGA FCBGA package. Its 90 nm CMOS process and 1.2 V core supply place it among the established Virtex-4 generation of FPGAs. The 320-I/O count supports substantial connectivity to external memory, data converters, network transceivers, and general-purpose logic interfaces, while the -10 grade identifies its performance class within the device family. The architecture combines 1,536 configurable logic blocks, according to the listed device description, with programmable interconnect resources and selectable I/O standards. A design can divide its resources among parallel datapaths, control logic, state machines, protocol interfaces, and DSP-oriented arithmetic pipelines. The 1.2 V core operating point requires a suitably regulated supply, while the 668-ball package demands careful PCB escape-routing and thermal analysis. Typical uses include industrial control, communications equipment, instrumentation, image and signal processing, high-speed interface bridging, and embedded test systems. In each case, the FPGA provides reconfigurable parallelism and adaptable I/O, making it useful where product requirements may evolve or where several fixed-format functions must be consolidated into one programmable device. PCB implementation should follow the AMD Virtex-4 package pinout files and the device-specific design guidance. Because no 668-ball diagram is present in the package library, verify every power, ground, configuration, and user-I/O assignment against the manufacturer package files before fabrication. Differential pairs and high-speed memory interfaces also require controlled impedance, length matching, and unobstructed return paths. This page organizes the exact package, logic-cell, I/O, process, speed, and lifecycle information for the XC4VLX15-10FF668C. It also identifies same-family drop-in candidates, separates lead-free and industrial-grade order codes, and highlights the package and timing checks that must be completed before reuse on an existing board.

RFQ رابطہ
XC4VLX15-10FF668I - 13,824-Cell Virtex-4 LX FPGA | AMD
XC4VLX15-10FF668I

XC4VLX15-10FF668I - 13,824-Cell Virtex-4 LX FPGA | AMD

AMD XC4VLX15-10FF668I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 I/O, and a 668-pin FCBGA package. The device uses a 90 nm CMOS process, operates from a 1.2 V core supply, and is offered in the -10 speed grade with an industrial-temperature designation. Its combination of programmable logic, block RAM, DSP resources, and a high pin count makes it suitable for demanding embedded systems requiring substantial parallel processing and external connectivity. A field-programmable gate array is a semiconductor whose digital functions are defined after fabrication through a configuration bitstream. The Virtex-4 LX FPGA family combines configurable logic blocks, programmable interconnect, block RAM, dedicated DSP resources, and selectable I/O resources. Within the broader hierarchy, this device is an FPGA, a semiconductor, and a programmable-logic IC. Its architecture permits one package to support multiple control, data-processing, interface, and signal-routing functions instead of requiring a collection of fixed-function devices. The principal characteristics visible for XC4VLX15-10FF668I include 13,824 logic cells, 320 user I/O, 884,736 as listed in the distributor specification snippet, and a 668-pin FCBGA package. The -10 suffix identifies the performance grade within the Virtex-4 family. The listing also identifies the device as a CMOS FPGA, while an FPGA catalog entry specifies 90 nm fabrication technology and a 1.2 V operating supply. The high logic density and extensive I/O capacity distinguish this Virtex-4 LX device from smaller FPGAs and CPLDs. A 320-I/O package allows concurrent connections to external memory, parallel buses, high-speed interfaces, control signals, and clock resources without requiring multiple programmable-logic packages. The FCBGA construction also supports dense PCB routing, but its thermal and mechanical requirements demand careful PCB design, thermal verification, and assembly control. Typical applications include industrial control, telecommunications equipment, test and measurement systems, embedded video processing, data-acquisition systems, and high-performance communications infrastructure. In these systems, the Virtex-4 LX FPGA can implement parallel datapaths, protocol controllers, state machines, signal processing, and programmable I/O logic in a single device. The same footprint can also support laboratory prototypes and production configurations that differ in bitstream or external interface behavior. A critical design consideration is that the 668-ball FCBGA cannot be treated like a leaded package. Its power, ground, and high-speed signals require a multilayer PCB with carefully controlled impedance, uninterrupted return paths, dense via distribution, and assembly-process qualification. Confirm the exact pin assignments from the AMD Virtex-4 package pinout files before routing the board. This product record combines the exact device identity, 668-package alternatives, technical distinctions, application guidance, and package-level engineering considerations to support component selection and PCB planning without relying solely on a basic catalog listing.

RFQ رابطہ