XC4VFX20-11FF672I - Virtex-4 FX FPGA, 672-BBGA | AMD
MPN: XC4VFX20-11FF672I ✓ فعالXC4VFX20-11FF672I جائزہ
An FPGA is a semiconductor device whose digital function is defined after manufacture by loading a configuration bitstream. The Virtex-4 FX family sits within the broader field-programmable gate array category, alongside programmable logic devices, CPLDs, and ASICs. Unlike a fixed-function ASIC, an FPGA allows engineers to revise logic, interfaces, timing behavior, and parallel processing architectures without changing the PCB. The XC4VFX20-11FF672I is therefore useful when a design needs substantial logic density, multiple dedicated I/O, high-speed fabric, or a configurable mix of hardware processing and external interfaces.
Key device characteristics include 90 nm CMOS construction, 19,224 logic cells, 3,136 logic blocks, 2,136 configurable logic blocks as reported in the retrieved specification record, and 672 package pins. The device is identified with a 1.2 V supply and an operating temperature range of 0 to 85 degrees Celsius for the listed -11 industrial version. Its high pin count supports broad connectivity for external memory, clocks, serial links, data converters, and board-level control signals.
The XC4VFX20-11FF672I is organized around a programmable fabric with dedicated resources for block RAM, DSP arithmetic, and embedded hard processors. This architecture allows designers to implement parallel datapaths, hardware-assisted control, packet processing, signal conditioning, and interface bridging while maintaining deterministic FPGA timing. The -11 speed grade provides a defined performance class within the Virtex-4 family, while the 672-pin package provides a large number of user I/O and dedicated configuration connections.
Typical applications include telecommunications equipment, industrial automation, instrumentation, network appliances, embedded control systems, and high-performance signal-processing platforms. In a communications design, the FPGA can implement parallel packet engines, bus interfaces, and data pipelines. In industrial control, it can combine deterministic machine interfaces with safety monitoring and programmable logic. In test and measurement equipment, dedicated DSP blocks can accelerate filters, transforms, and fixed-point arithmetic.
Designers should treat the XC4VFX20-11FF672I as a high-pin-count, high-speed device requiring careful power distribution, decoupling, clocking, and signal-integrity control. The manufacturer’s Virtex-4 package pinout files and DS112 family overview should be used to assign every package ball and confirm board-level connectivity. Configuration storage, startup sequencing, auxiliary supply requirements, and thermal management must be designed together because the 672-pin FCBGA footprint offers limited escape routing around the device.
This page combines the exact catalog identity, retrieved specifications, package information, practical application guidance, and qualified drop-in alternatives for engineers evaluating the XC4VFX20-11FF672I. It also highlights the distinction between the industrial -I suffix, the commercial -C suffix, the -G package marking, and the related speed-grade options so that replacement decisions are based on electrical and package compatibility rather than part-number similarity alone.
کے لیے ڈراپ اِن متبادل XC4VFX20-11FF672I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
XC4VFX20-11FFG672I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VFX20-11FF672C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC4VFX20-10FFG672C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VFX20-11FF672CS1
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VFX20-11FF672I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Virtex-4 FX Field Programmable Gate Array |
| Logic Cells | 19,224 cells |
| Logic Blocks | 3,136 blocks |
| Configurable Logic Blocks | 2,136 CLBs |
| Process Technology | 90 nm CMOS |
| Speed Grade | -11 |
| Core Supply Voltage | 1.2 V typical |
| Internal Frequency | 1,028 MHz |
| Package Type | 672-pin FCBGA |
| Package Pin Count | 672 pins |
| آپریٹنگ درجہ حرارت | 0 to 85 degrees Celsius |
| ماؤنٹنگ ٹائپ | Surface mount |
XC4VFX20-11FF672I 672 pins پن کنفیگریشن گائیڈ
XC4VFX20-11FF672I (672 pins پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC4VFX20-11FF672I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC4VFX20-11FF672I کے لیے موزوں ہے 6 ایپلیکیشنs: Telecommunications Packet Processing, Industrial Automation and Control, Digital Signal Processing, Network Interface Bridging, Test and Measurement Instrumentation, Embedded Control Systems.
Telecommunications Packet Processing
The XC4VFX20-11FF672I is suitable for telecommunications equipment that requires parallel packet classification, buffering, and interface bridging. Its 19,224 logic cells and 3,136 logic blocks provide substantial programmable fabric, while the 672-pin FCBGA package supports connections to external memory, network PHYs, clock sources, and backplane interfaces. The -11 speed grade provides a defined performance class for timing-sensitive datapaths. Designers should use the Virtex-4 block RAM and DSP resources for buffering and arithmetic rather than consuming unnecessary logic cells.
تجویز کردہ
Industrial Automation and Control
The XC4VFX20-11FF672I fits industrial automation systems that combine machine control, diagnostics, communications, and deterministic parallel logic. Its listed 0 to 85 degrees Celsius operating range supports industrial environments, while the large package provides numerous connections for sensors, actuators, safety logic, and field buses. The 90 nm FPGA architecture allows control algorithms and communication protocols to be updated through configuration. Thermal design remains important because activity-dependent logic and I/O loading can produce different power and junction-temperature conditions than a lightly configured device.
تجویز کردہ
Digital Signal Processing
The XC4VFX20-11FF672I is well suited to parallel digital signal processing in instrumentation and communications equipment. The device provides 19,224 logic cells and dedicated Virtex-4 resources that can implement filters, transforms, correlation, and fixed-point arithmetic pipelines. Using DSP blocks for suitable operations preserves configurable logic for control and interface functions. The -11 speed grade should be evaluated against the required clock and pipeline latency, and the complete design should be timing-closed with the appropriate AMD FPGA implementation tools and device constraints.
تجویز کردہ
Network Interface Bridging
The XC4VFX20-11FF672I can implement protocol conversion, width adaptation, and packet-rate bridging between external devices. Its 672-pin FCBGA interface complement is useful when a design requires parallel buses, source-synchronous links, or multiple independent data paths. The 2,136 configurable logic blocks and 3,136 total logic blocks allow interface logic and buffering logic to coexist. High-speed routing still requires disciplined length matching, controlled-impedance PCB design, and verification against the selected external-device and Virtex-4 timing specifications.
تجویز کردہ
Test and Measurement Instrumentation
The XC4VFX20-11FF672I supports programmable test and measurement systems that combine acquisition logic, trigger processing, calibration, and data formatting. Its parallel fabric is appropriate for sampling pipelines, while dedicated Virtex-4 resources can accelerate arithmetic in analysis engines. The 672-pin package provides connections for converters, memory, displays, clocks, and instrumentation control signals. For accurate measurements, designers should constrain clocking and I/O timing, isolate analog circuitry from digital return paths, and budget FPGA power according to the actual configured resources rather than logic-cell capacity alone.
تجویز کردہ
Embedded Control Systems
The XC4VFX20-11FF672I is applicable to embedded control systems requiring both programmable logic and a high-pin-count mixed peripheral interface. The FPGA fabric can implement real-time controllers, state machines, safety interlocks, and custom peripheral bridges, while the package supports external memory and control devices. The industrial temperature listing makes it suitable for many embedded industrial platforms. Configuration should include a defined startup path, watchdog behavior, and fail-safe outputs so that the system remains deterministic during power-up, configuration failure, or firmware update.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC4VFX20-11FF672I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC4VFX20-11FFG672I | XC4VFX20-11FF672C | XC4VFX20-10FFG672C | XC4VFX20-11FF672CS1 |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA |
| Device Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -11 | -11 | -11 | -10 | -11 |
اہم امتیازی خصوصیات
- Higher defined speed class than the -10 related variant (بمقابلہXC4VFX20-10FFG672C)
- Industrial temperature designation (بمقابلہXC4VFX20-11FF672C)
- Full 672-pin high-connectivity package (بمقابلہXC4VFX20-11FF672CS1)
- Substantial parallel programmable fabric (بمقابلہXC4VFX20-10FFG672C)
ڈیزائن نوٹس
Use the AMD Virtex-4 power-estimation methodology with the actual design utilization, clock rates, I/O activity, and enabled peripherals. Place the required core and auxiliary decoupling capacitors at the relevant supply balls, with separate return paths to the power and ground planes. Verify voltage sequencing and tolerances against the device documentation rather than assuming that the 1.2 V typical core value applies to every supply rail.
The 672-ball FCBGA requires a high-density escape-routing strategy. Match the PCB footprint, ball map, and component orientation to the AMD package drawing and pinout files before layout sign-off. Keep configuration interfaces, clock inputs, and high-speed interfaces away from noisy power-conversion nodes, and use controlled-impedance routing for external interfaces whose timing and signal-integrity requirements are defined in the design.
Estimate junction temperature from the actual configured power, package thermal data, board copper, airflow, and ambient temperature. Logic utilization and I/O toggling can change consumption significantly from an empty-device condition. For exposed-pad or board-heat-spreader arrangements, follow the package drawing for the required thermal-via pattern and confirm assembly solderability separately from electrical performance.
Do not treat a related order code as interchangeable solely because it has 672 pins. Confirm the G, C, I, S1, and speed-grade suffixes against AMD ordering information, then verify the exact ballout, configuration requirements, temperature grade, and tool-supported device name. Also ensure the replacement bitstream and board configuration interface are valid for the selected part before production release.
Use the device-specific Virtex-4 timing constraints and any applicable board-design guidance for clocks and high-speed I/O. Account for package and board delay when constraining interfaces, and validate source-synchronous or memory interfaces with appropriate termination and via structures. A clean schematic is not sufficient evidence that a 672-ball design will meet timing at system-level edge rates.
تعمیل کی معلومات
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was included in the retrieved target product material.