مصنوعات (44,000+)

XC7A12T-1CSG325I - 12,800-Cell Artix-7 FPGA | AMD
XC7A12T-1CSG325I

XC7A12T-1CSG325I - 12,800-Cell Artix-7 FPGA | AMD

The AMD XC7A12T-1CSG325I is an Artix-7 field-programmable gate array with 12,800 logic cells, 150 I/O, and 28 nm fabrication technology in a 325-pin CSBGA package. The verified distributor data also identifies 737,280 as an associated device figure and lists a 1 V core supply value. These figures position the device as a compact FPGA platform for embedded control, industrial automation, communications, instrumentation, and cost-sensitive designs that require programmable logic and a substantial pin count. A field-programmable gate array is a semiconductor whose digital logic, memory, and I/O behavior can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic device and a semiconductor. The Artix-7 family combines programmable logic resources with a relatively compact package, allowing engineers to consolidate functions that might otherwise require separate processors, glue logic, and interface devices. The XC7A12T-1CSG325I specifically uses a CSBGA package with 324-LFBGA/CSPBGA notation in the verified distributor listings. The principal verified attributes are the 12,800-cell Artix-7 logic capacity, 150 available I/O, 28 nm process technology, 1 V value, and 325-pin package. The 150-I/O count is particularly useful for parallel data acquisition, multiple external memory interfaces, control signals, and high-pin-count communication peripherals. The large BGA land pattern also supports dense routing in multilayer PCB designs, but it requires careful escape routing, via planning, and assembly-process control. This is an FPGA rather than a fixed-function microcontroller, so the implemented design is defined by the bitstream loaded into the device. That architecture allows logic behavior to be revised without changing the PCB when requirements evolve. It also makes configuration memory, startup sequencing, clocking, decoupling, and I/O standards central engineering considerations. Exact block counts, memory resources, supported interfaces, performance grades, power limits, and electrical characteristics beyond the supplied verified values require the AMD device documentation before design release. Typical uses include industrial factory automation, industrial motor and motion control, network-interface equipment, test and measurement systems, embedded instrumentation, and compact communications platforms. In these applications, the 150 I/O and 12,800 logic cells can consolidate parallel control, acquisition, protocol, and data-processing functions, while the Artix-7 device family provides a path to hardware specialization and field updates. PCB planning should prioritize the BGA escape path, layer transitions, clean power distribution, and thermal spreading around the device. Because the verified package is not represented by an available canonical SVG package key, the pinout is not reproduced here. Engineers should use the official AMD Artix-7 package pinout files to verify every ball assignment, power pin, configuration pin, and keep-out region before layout release. This page consolidates verified distributor specifications, package information, sourcing links, comparison fields, and engineering cautions for XC7A12T-1CSG325I. It separates documented values from unavailable technical data and avoids presenting unverified performance, pricing, pin assignments, compliance claims, or replacement parts as established facts.

RFQ رابطہ
XC7A12T-2CPG238C - 12.8K Artix-7 FPGA | AMD
XC7A12T-2CPG238C

XC7A12T-2CPG238C - 12.8K Artix-7 FPGA | AMD

The AMD XC7A12T-2CPG238C is an Artix-7 field-programmable gate array with 12,800 logic cells, 106 user I/Os, and a 1.0 V core in a 238-pin CSPBGA package. Designed for cost-sensitive, power-conscious programmable-logic applications, the device uses 28 nm HKMG technology and is available in a compact 10 mm × 10 mm package. Its -2 speed designation identifies the performance grade, while the C suffix denotes the commercial temperature option. An FPGA is a programmable semiconductor in the broader semiconductor and digital-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, block RAM, digital signal processing resources, and general-purpose I/O in one device. Artix-7 belongs to the FPGA family within programmable-logic devices and combines moderate logic capacity with low power consumption for cost-sensitive embedded designs. The XC7A12T provides 12,800 logic cells and 106 user I/Os, making it suitable for parallel data acquisition, control logic, communications bridges, industrial interfaces, and embedded signal-processing systems. The 238-pin CSPBGA package offers substantially more external connections than a leaded FPGA package, supporting high-pin-count interfaces while keeping the device physically compact. The 1.0 V core supply is an important integration constraint for systems using modern low-voltage FPGA logic. The device is fabricated on 28 nm HKMG technology. This process places the XC7A12T between higher-capacity programmable devices and simpler fixed-function controllers in cost and integration terms. Its 106 I/Os allow designers to connect external memory, converters, transceivers, clocks, and parallel data sources directly to configurable logic. The supplied distributor data identifies the Artix-7 architecture but does not expose detailed block RAM, DSP slice, maximum clock, or I/O performance figures. Typical applications include industrial control and automation, communications and networking interfaces, instrumentation, embedded vision, sensor aggregation, and low-power portable equipment. In these systems, the FPGA can consolidate parallel interfaces, protocol conversion, timing, data acquisition, and control functions while shortening development time compared with multiple fixed-function devices. The 10 mm × 10 mm CSPBGA also supports space-constrained board layouts when careful escape routing and multilayer PCB construction are used. The principal design consideration is BGA implementation. A 238-ball package requires a multilayer PCB, controlled via geometry, adequate solder-mask and paste design, X-ray inspection, and a temperature-controlled assembly profile. Designers must also verify the complete power tree for the 1.0 V core and associated I/O supply requirements rather than assuming that one rail satisfies the device. This page combines verified distributor specifications with practical selection guidance, package considerations, and engineering-focused comparisons. It separates known values from unavailable details so procurement teams can identify supply, fit, and lifecycle risks before committing the XC7A12T-2CPG238C to an FPGA-based design.

RFQ رابطہ
XC7A12T-2CPG238I - 12.8K Logic Cell FPGA | AMD | Industrial
XC7A12T-2CPG238I

XC7A12T-2CPG238I - 12.8K Logic Cell FPGA | AMD | Industrial

The AMD XC7A12T-2CPG238I is an Artix-7 field-programmable gate array with 12,800 logic cells, 106 user I/Os and a 1 V core supply, housed in a 238-ball CSPBGA package. Its 28 nm programmable logic architecture combines general-purpose logic with DSP and memory resources in a compact surface-mount package designed for industrial embedded systems. An FPGA is a semiconductor whose digital behavior is defined by a user-programmed configuration rather than fixed logic. Within the product hierarchy, an Artix-7 FPGA belongs to the programmable-logic-device family, combining configurable logic blocks, block RAM, DSP resources and programmable I/O. This allows one physical device to implement control logic, signal processing, communications and interface functions without requiring a large collection of fixed-function ICs. The device provides 12,800 logic cells, 106 user I/Os and 106 I/O in its 238-ball CSPBGA package. The -2 designation identifies the selected performance grade, while the I suffix denotes the industrial-temperature option. The manufacturer documentation describes a core operating voltage of 1 V, a 28 nm process implementation and an industrial junction-temperature rating of -40°C to +100°C. Its architecture is appropriate for parallel data acquisition, industrial control, embedded vision and communication adapters. The 106 user I/Os provide interfaces for sensors, actuators, memory and high-speed digital links, while the programmable logic fabric can implement multiple finite-state machines, protocol engines and control loops. The 238-ball CSPBGA package supports dense PCB layouts but requires careful escape routing, power-plane distribution and BGA assembly process control. Typical uses include programmable sensor nodes, industrial gateways, motor-control sequencers, test equipment and compact embedded vision. The FPGA can consolidate functions that would otherwise require separate logic devices, interface converters and fixed-function processors. Its industrial temperature option also supports equipment operating beyond consumer-temperature environments when the complete system is thermally qualified. Design around the exact CSPBGA ball map, separated power and ground planes, and the manufacturer's recommended high-speed layout guidance. Verify every power rail, decoupling capacitor, configuration interface and exposed pad connection against the Artix-7 package files before fabrication. Configuration storage and programming-chain design should also be reviewed before the first hardware build. This page combines device specifications, engineering application guidance, package considerations and structured comparison information to support FPGA selection, PCB planning and sourcing. It also identifies the closest qualified drop-in choices while separating speed-grade and temperature-grade differences.

RFQ رابطہ
XC7A12T-2CSG325I - 12.8K Logic Cell Artix-7 FPGA | AMD
XC7A12T-2CSG325I

XC7A12T-2CSG325I - 12.8K Logic Cell Artix-7 FPGA | AMD

AMD XC7A12T-2CSG325I is an Artix-7 field-programmable gate array with 12,800 logic cells, 150 user I/Os, 737,280 internal configuration memory bits, and a -2 performance grade in a 324-LFBGA CSBGA package. Built on 28 nm HKMG HPL process technology, this FPGA targets cost-sensitive, low-power designs requiring moderate logic density and serial connectivity. An FPGA is a reconfigurable digital semiconductor whose programmable logic, memory blocks, and programmable I/O can be configured after manufacture. The Artix-7 family combines a low-cost FPGA architecture with resources suited to embedded processing, control logic, communication interfaces, and general-purpose digital systems. XC7A12T-2CSG325I is the smallest logic-density member of this Artix-7 family as identified by the verified 12,800-logic-cell specification. The device provides 150 user I/Os, allowing a compact design to expose substantial external connectivity despite its relatively small logic capacity. Its 737,280 configuration-memory bits provide the nonvolatile storage used to define the implemented logic and interconnect configuration. The -2 speed designation identifies its performance grade, while the CSBGA package supports compact, high-density PCB integration. The 28 nm HKMG HPL process provides the physical foundation for the device's low-power, cost-sensitive positioning. Available design resources can be assigned for control, data acquisition, interface bridging, embedded signal processing, or general programmable logic. Exact block counts, memory capacity, supported I/O standards, operating-temperature limits, and recommended operating conditions are not present in the supplied source excerpts and therefore should not be inferred. Typical applications include industrial control modules, low-power embedded systems, communication interfaces, video and image-processing front ends, instrumentation, and consumer or embedded products that benefit from reconfigurable logic. The 150 I/Os are especially useful when an external processor, memory, transceiver, or mixed-signal interface requires multiple parallel connections. PCB planning should use the official AMD Artix-7 package pinout files rather than generic BGA assumptions. Decoupling, power sequencing, configuration-interface routing, and thermal management must follow the applicable AMD seven-series guidance, and unused balls should not be assigned functions without consulting the package data. This page consolidates verified distributor specifications, package information, availability, and design guidance into one engineering-focused reference. It also distinguishes the only verified same-package alternatives from different-package devices that may be functionally similar but cannot replace the target without PCB and design changes.

RFQ رابطہ
XC7A12T-3CPG238E - -3 Speed Grade Artix-7 FPGA | Xilinx
XC7A12T-3CPG238E

XC7A12T-3CPG238E - -3 Speed Grade Artix-7 FPGA | Xilinx

Xilinx Inc. XC7A12T-3CPG238E is an Artix-7 field-programmable gate array (FPGA) supplied in a 238-ball low-profile fine-pitch BGA package. The device combines 12,800 logic cells, 112 I/O, and a -3 speed grade in a compact CSBGA/LFBGA-238 package. It is a programmable logic device intended for designs requiring flexible parallel interfaces, embedded control logic, signal processing, or general-purpose digital logic. An FPGA is a semiconductor whose digital logic, interconnect, and configurable I/O blocks are programmed after manufacture. Artix-7 devices belong to the broader FPGA and programmable-logic hierarchy, combining configurable logic, block RAM, DSP resources, and programmable I/O in one package. This makes the XC7A12T-3CPG238E suitable for embedded systems that need hardware-level parallelism and design flexibility without the resource level of a larger FPGA. The catalog listing identifies 12,800 logic cells, 112 I/O, 238 terminals, and a -3 device speed designation. Its square LFBGA package places the device in the CSBGA-238 package family, providing a dense PCB land pattern suitable for compact industrial, communications, instrumentation, and embedded-control equipment. The part is also identified as RoHS compliant by its assembly listing. The XC7A12T-3CPG238E shares the XC7A12T device designation and 238-ball package with speed-grade and temperature-grade variants. This common mechanical and logical basis supports simplified product-family planning, although a migration must still account for timing closure, junction-temperature limits, power characteristics, configuration compatibility, and the exact ordering code. The AMD Artix-7 package pinout files should be used to validate every PCB connection before fabrication. Typical uses include industrial data acquisition, camera and image-processing pipelines, communications interfaces, embedded control, test equipment, and sensor-processing systems. The -3 speed grade is appropriate when timing performance is a principal selection factor. Designers should define clock constraints, pin assignments, power rails, and configuration requirements early in the schematic and PCB-layout process. PCB implementation requires careful power-plane distribution, decoupling, and escape-routing strategy for the 238-ball BGA. Use the manufacturer package drawing and pinout files for land patterns, ball assignments, thermal-pad treatment, and assembly constraints. Because fine-pitch BGA assembly can hide shorts and opens, inspection methods and soldering profile must match the package requirements. This product record combines package, logic-resource, ordering-code, and lifecycle information with same-package family comparisons and practical implementation guidance. It also distinguishes mechanical compatibility from timing-grade and environmental differences, helping engineers select a replacement without overlooking the constraints that determine production suitability.

RFQ رابطہ
XC7A12T-L1CPG236I - 12.8K Logic Artix-7 FPGA | AMD
XC7A12T-L1CPG236I

XC7A12T-L1CPG236I - 12.8K Logic Artix-7 FPGA | AMD

AMD XC7A12T-L1CPG236I is an Artix-7 field-programmable gate array with 12,800 logic elements, 737,280 RAM bits, 106 I/O pins, and a 238-CSBGA package measuring 10 mm by 10 mm. The device is identified as the L1 speed grade and operates across an industrial junction-temperature range of -40°C to 100°C. An FPGA is a programmable semiconductor containing configurable logic, memory, and I/O blocks. Artix-7 devices belong to the FPGA and CPLD hierarchy of programmable logic semiconductors, combining hardware parallel processing with field-updatable configuration. The XC7A12T-L1CPG236I provides a compact implementation platform for control logic, signal processing, interface bridging, communications, embedded systems, and industrial automation. The principal device resources include 12,800 logic elements, 737,280 total RAM bits, and 1,000 LABs or CLBs. Its 106 I/O pins provide external connectivity for digital buses, clocks, control signals, and communications interfaces. The surface-mount 238-CSBGA package supports compact PCB construction while exposing a substantially larger ball array than smaller Artix-7 packages. The L1 ordering code identifies a distinct speed and device option that must be preserved when replacing the exact MPN. Resource totals and package ball assignments remain critical compatibility points: an FPGA with a similar family name is not automatically interchangeable unless its package, pinout, configuration architecture, voltage requirements, and supported I/O standards match the original design. Typical uses include industrial control systems, programmable logic controllers, data-acquisition equipment, communications infrastructure, embedded vision, instrument control, and low-cost FPGA prototyping. The combination of 12,800 logic elements and 106 I/O makes the device suitable for parallel control, protocol conversion, and multi-interface designs requiring more external connectivity than very small FPGA packages provide. PCB design should use the AMD Artix-7 package pinout files for ball assignments, power rails, configuration pins, and exposed connections. Configuration storage, programming interface routing, decoupling, clocking, and I/O voltage compatibility should be checked against the exact device and board requirements before manufacturing. This product page combines the exact Artix-7 resource summary, package information, temperature range, procurement guidance, drop-in options, and PCB design considerations to support component selection and engineering review beyond a basic catalog listing.

RFQ رابطہ
XC7A12T-L1CPG238I - 12,800-Cell Artix-7 FPGA | AMD
XC7A12T-L1CPG238I

XC7A12T-L1CPG238I - 12,800-Cell Artix-7 FPGA | AMD

The AMD XC7A12T-L1CPG238I is an Artix-7 field-programmable gate array with 12,800 macrocells, 2,000 logic blocks, 720 Kbit of block RAM, and a 920 mV to 980 mV core-voltage range, housed in a 238-ball CSBGA package. The device provides 106 user I/O and combines programmable logic, DSP, and memory resources in a compact 10 mm × 10 mm package for low-power embedded systems. An FPGA is a semiconductor whose digital logic, interconnect, memory, and signal-processing blocks are configured after manufacture. The XC7A12T belongs to the Artix-7 FPGA family within the broader hierarchy of programmable logic devices, FPGAs, and digital semiconductors. Artix-7 devices are positioned for compact, energy-efficient applications where larger Kintex-7 or Virtex-7 resources and power requirements would be unnecessary. The device provides 40 DSP slices, 2,000 logic blocks, 12,800 macrocells, and 720 Kbit of block RAM. Its 106 user I/O support external interfaces, while the 238-ball CSBGA package reduces board area compared with larger leaded FPGA packages. The L1 ordering variant combines the 12T device configuration with the speed and temperature options associated with the exact L1CPG238I ordering code. Artix-7 architecture combines configurable logic blocks, block RAM, digital signal processing resources, programmable I/O, and dedicated clocking resources. This allows control logic, data acquisition, protocol handling, filtering, and fixed-point arithmetic to be consolidated in one device. Designers can use AMD Vivado or compatible FPGA design flows to synthesize, place, route, and program the device, then validate timing and board-level behavior. Typical uses include industrial monitoring, embedded vision, communications gateways, test equipment, and compact control systems. The 720 Kbit of block RAM is useful for packet buffering and local data storage, while 40 DSP slices support parallel filtering, modulation, or signal-conditioning functions. The 106 I/O count provides connectivity for external converters, memories, transceivers, clocks, and control signals. PCB design should prioritize clean power delivery, low-noise clock routing, and controlled-return paths for high-speed I/O. The manufacturer package pinout files and Artix-7 design documentation should be used directly when assigning ball positions and planning the 238-ball BGA layout. Configuration storage, decoupling, thermal management, and signal-integrity verification remain essential to reliable FPGA operation.

RFQ رابطہ
XC7A12T-L1CSG325I - 12.8K Cell Artix-7 FPGA | AMD
XC7A12T-L1CSG325I

XC7A12T-L1CSG325I - 12.8K Cell Artix-7 FPGA | AMD

The AMD XC7A12T-L1CSG325I is an Artix-7 field-programmable gate array with 12,800 logic cells, 150 I/O sites, 28 nm process technology, and a 1 V core supply in a 324-CSBGA package. It combines programmable logic resources with block RAM, DSP slices, and mixed-signal capabilities in a compact surface-mount device designed for low-power, cost-sensitive embedded systems. An FPGA is a semiconductor device whose digital logic and interconnect can be configured after manufacture. The Artix-7 family occupies the hierarchy between general-purpose programmable logic and higher-end FPGA products, supporting parallel processing, interface bridging, control, and signal-processing functions without requiring a separately fabricated ASIC. This makes an Artix-7 FPGA useful when design requirements are evolving faster than a mask set can be revised. Key device attributes include 12,800 logic cells, 150 available I/O locations, 28 nm fabrication technology, and a 1 V operating core voltage identified for the closely related XC7A12T-1CSG325I ordering information. The device also provides programmable logic blocks, dedicated digital signal processing resources, and block RAM for control logic, data acquisition, communication, and embedded image-processing applications. Its BGA package supports compact, high-density PCB layouts. The Artix-7 architecture provides configurable logic, programmable interconnect, embedded memory, DSP resources, and integrated memory and I/O capabilities within one programmable device. This integration allows multiple fixed-function components to be consolidated into a single FPGA implementation. Configuration loading, clocking, power sequencing, and bank-specific voltage requirements must still be handled by the surrounding board and programming system. Typical applications include industrial automation, sensor and test systems, embedded control, communications infrastructure, instrumentation, and compact edge-processing equipment. The 150-I/O interface is particularly useful for systems combining external memory, serial links, control signals, and high-speed data paths. The 12.8K-cell density is appropriate for moderate-complexity parallel processing where a larger FPGA would add unnecessary cost, size, and power. Board design requires careful BGA fanout, power-plane planning, decoupling, and thermal management. The 324-CSBGA footprint should be implemented according to the AMD Artix-7 package files and pinout resources, while every power, ground, configuration, clock, and I/O connection should be checked against the exact ordering code before layout release. This page organizes the device specifications, verified source links, practical design considerations, application guidance, and same-footprint ordering alternatives for engineers evaluating the XC7A12T-L1CSG325I. It also highlights the need to verify speed grade, temperature grade, package revisions, and lifecycle status against the manufacturer ordering guide before production release.

RFQ رابطہ
XC7A12T-L2CPG236E - 12,800 LEs Artix-7 FPGA | AMD
XC7A12T-L2CPG236E

XC7A12T-L2CPG236E - 12,800 LEs Artix-7 FPGA | AMD

The AMD XC7A12T-L2CPG236E is an Artix-7 field-programmable gate array with 12,800 logic elements, 737,280 RAM bits, and 106 user I/Os in a 238-LFBGA package. It combines programmable logic, block RAM, and programmable I/O in a compact surface-mount device for embedded control, signal processing, communications, and industrial automation. A field-programmable gate array is a semiconductor whose digital logic and I/O behavior are configured after manufacture. The FPGA hierarchy begins with the XC7A12T device, continues to the Artix-7 family, and extends to programmable-logic devices, semiconductors, and embedded electronic systems. This makes the part suitable for designs that need hardware flexibility without the cycle time associated with a custom ASIC. The device provides 12,800 logic elements and 737,280 RAM bits for control logic, packet handling, data buffering, and parallel signal processing. Its 106 user I/Os support integration with external memory, converters, transceivers, and industrial interfaces. The CPG236 option is supplied in a 238-LFBGA, CSPBGA package measuring 10 mm by 10 mm according to product listings. The L2 designation identifies the device's performance and temperature qualification option, while the E suffix identifies an extended-temperature-grade configuration. Designers should preserve the exact ordering code when replacing the part because speed grade, temperature grade, and package suffix affect qualification, timing, and system behavior. Configuration data is normally loaded through the device's supported serial or parallel programming interface. Typical applications include industrial controllers, embedded vision systems, communications infrastructure, test equipment, and low-power edge-processing modules. The 10 mm by 10 mm package helps reduce board area, while the 106 I/Os provide substantial connectivity for external memories and mixed-signal interfaces. The device is suitable for designs that benefit from hardware parallelism, reconfigurable logic, and deterministic FPGA execution. PCB implementation requires careful escape routing from the dense BGA land pattern and strict power, ground, and signal-integrity practices. Follow the AMD Artix-7 package pinout file and device guidelines for ball assignments, decoupling, configuration pins, and PCB stack-up. Because this exact ordering code is obsolete, a new design should verify current Artix-7 availability before committing to the footprint. This page combines the exact ordering-code characteristics with pinout guidance, application analysis, lifecycle information, and same-footprint migration options. Engineers can use it to distinguish genuine package-compatible alternatives from FPGA substitutes that require a board redesign.

RFQ رابطہ
XC7A12T-L2CPG238E Artix-7 FPGA 12,800 Logic Cells | AMD
XC7A12T-L2CPG238E

XC7A12T-L2CPG238E Artix-7 FPGA 12,800 Logic Cells | AMD

The AMD XC7A12T-L2CPG238E is an Artix-7 field-programmable gate array with 12,800 logic cells, 737,280 bits of block RAM, and 106 programmable I/O sites, supplied in a 238-ball chip-scale BGA package. It operates from a 0.95 V to 1.05 V core supply and is specified for a junction-temperature range of 0 °C to 100 °C. The -L2 designation identifies the low-power Artix-7 product and -2 performance class, while CPG238 identifies the 238-ball CSPBGA package and E identifies the extended commercial temperature option. An FPGA is a programmable semiconductor whose logic, memory, and I/O resources can be configured after manufacture. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and below application-specific programmable devices. Artix-7 devices combine configurable logic blocks, dedicated DSP slices, block RAM, programmable input/output, and high-speed serial transceivers, allowing one device to implement control logic, signal processing, and external interfaces without relying on a separate processor for peripheral management. The XC7A12T provides 1,000 configurable logic blocks organized into 12,800 logic cells. Its 737,280 bits of block RAM support buffering, packet storage, data acquisition, and general-purpose embedded memory. The device also exposes 106 programmable I/O, which supports parallel buses, control signals, status outputs, and external memory interfaces. The package and pin arrangement support high-density board layouts, while the low-power -L family designation targets cost-sensitive embedded systems where performance and energy efficiency must coexist. The XC7A12T family is supported by AMD Xilinx FPGA development tools, Vivado Design Suite, and programming configurations for parallel processing, interface bridging, and embedded control. A maximum family clock figure of 1,286 MHz is associated with the XC7A12T performance class, but realized system timing depends on the selected speed grade, clocking resources, logic utilization, I/O standards, and board-level implementation. Typical uses include industrial automation and factory control, compact data-acquisition systems, network interface conversion, embedded video and image-processing pipelines, and instrumentation requiring parallel logic with on-chip memory. The device is also appropriate for education, prototyping, and general-purpose digital design where programmable logic replaces combinations of discrete fixed-function ICs. Board planning should begin with the 238-ball package pinout and the power, configuration, clocking, and differential-pair requirements in the Artix-7 7 Series FPGAs Data Sheet: Overview, DS180. Validate the selected I/O standard against the voltage supplied to the relevant bank, and confirm the pinout files for the exact 238-ball package before assigning PCB tracks. This page consolidates device specifications, package information, practical design guidance, and technically relevant alternatives. It is intended to help engineers qualify the Artix-7 device against logic, memory, I/O, thermal, and board-layout requirements before committing the FPGA to a design.

RFQ رابطہ
XC7A12T-L2CSG325E - Artix-7 FPGA, 12,800 Cells | AMD
XC7A12T-L2CSG325E

XC7A12T-L2CSG325E - Artix-7 FPGA, 12,800 Cells | AMD

AMD XC7A12T-L2CSG325E is an Artix-7 field-programmable gate array built on a 28 nm process, with 12,800 logic cells, 150 I/O, 12800 cells, and 325-ball CSBGA packaging. The L2 speed grade provides a mid-performance option within the Artix-7 family, while the E suffix identifies an extended-temperature-grade device. It is positioned for cost-sensitive designs requiring programmable logic, parallel interfaces, control, and moderate signal-processing capability in a compact surface-mount package. An FPGA is a semiconductor whose digital behavior is defined after manufacture by loading a configuration bitstream into internal programmable logic and block resources. Artix-7 devices combine configurable logic, memory, DSP blocks, and general-purpose I/O in one device. This places the XC7A12T-L2CSG325E within the hierarchy of programmable logic devices, field-programmable gate arrays, semiconductors, and embedded control hardware. The Artix-7 architecture provides 12,800 logic cells and 150 I/O according to the product listing. The 325-ball CSBGA package supports dense board layouts, although its fine ball pitch makes careful escape routing, multilayer PCB construction, and assembly-process control important. The E designation denotes the extended-temperature grade; exact junction, ambient, and military-temperature limits require confirmation in the manufacturer ordering guide and Artix-7 data sheet. The L2 grade is intended for designs that need more timing margin than the -1 grade but do not require the -3 grade's maximum performance. FPGA timing depends on the selected clock, logic depth, routing congestion, I/O standard, speed grade, and operating conditions, so a timing report from Vivado is the appropriate final verification method. Configuration, power rails, decoupling, clocking, and JTAG access should be planned together because configuration errors or unstable rails can prevent reliable startup. Typical uses include industrial control, test and measurement, robotics, embedded video interfaces, communications control, and low-cost embedded processing. The device is also suitable for educational platforms and prototypes requiring repeated firmware or logic revisions without changing physical components. Its value comes from combining programmable digital logic, a large I/O count, and a compact package in one reconfigurable device. For a new PCB, reserve all power and ground balls according to the AMD package files, place high-frequency decoupling close to the device, and follow the Artix-7 package pinout and UG475 guidance. For a replacement, confirm the exact speed grade, temperature grade, package ball map, bitstream compatibility, and timing margin rather than relying on family naming alone. This product page combines the exact XC7A12T-L2CSG325E identity, package information, speed-grade alternatives, sourcing records, and design guidance to support engineering selection, footprint verification, and drop-in replacement planning.

RFQ رابطہ
XC7A15T-1CPG236C - 16,640 Logic Cell Artix-7 FPGA | AMD
XC7A15T-1CPG236C

XC7A15T-1CPG236C - 16,640 Logic Cell Artix-7 FPGA | AMD

AMD XC7A15T-1CPG236C is an Artix-7 field-programmable gate array with 16,640 logic cells, 106 I/Os, 921,600 bits of block RAM, and up to 464 DSP slices in a 238-ball CSPBGA package. It combines programmable logic, fixed DSP resources, block RAM, and high-speed I/O in a compact device intended for cost-sensitive, power-efficient embedded processing. An FPGA is a reconfigurable semiconductor in the programmable-logic hierarchy: FPGA > programmable logic device > digital semiconductor. Unlike a fixed-function microcontroller or DSP, an FPGA allows parallel circuits, interfaces, and signal-processing pipelines to be defined in programmable hardware. The Artix-7 family combines this flexibility with a 28 nm process and an optimized balance of performance per watt, logic density, DSP capability, and cost. The XC7A15T-1CPG236C provides 16,640 logic cells for control logic, state machines, protocol handling, and parallel datapaths. Its 921,600 bits of block RAM support buffering, packet storage, and data-domain conversion, while 464 DSP slices accelerate filters and other multiply-accumulate operations. The -1 speed designation identifies the device's performance grade, and the C commercial-temperature designation supports designs in commercial temperature conditions. The 238-CSBGA package exposes 106 user I/Os according to distributor records. This combination makes the device useful where a relatively compact programmable device is needed with both dedicated DSP resources and general-purpose logic. Exact package dimensions, voltage ratings, differential-I/O standards, and supported transceiver capabilities were not supplied in the verified records and should be confirmed in the AMD family documentation before schematic release. Typical uses include software-defined radio front ends, industrial automation, machine-vision image processing, embedded control, communication infrastructure, and digital signal processing. Parallel FIR filters, interpolation, decimation, modulation stages, and sensor-data pipelines can be mapped to the DSP slices while control and interface logic occupy the programmable fabric and block RAM. PCB implementation requires careful assignment of the 238-ball BGA footprint, multilayer escape routing, and verified power, ground, and I/O standards. The design should also include bitstream-generation, timing-analysis, and JTAG programming steps using the corresponding Artix-7 device support. This page combines verified distributor data with engineering-oriented guidance, comparison points, and clearly identified data gaps for design review.

RFQ رابطہ
XC7A15T-1CSG324C - 16.6K Logic Cell Artix-7 FPGA | AMD
XC7A15T-1CSG324C

XC7A15T-1CSG324C - 16.6K Logic Cell Artix-7 FPGA | AMD

AMD XC7A15T-1CSG324C is an Artix-7 field-programmable gate array built on a 28 nm process, with 16,640 logic cells, 210 I/Os, and a 324-ball chip-scale BGA package measuring 15 mm by 15 mm. The device operates from 0.95 V to 1.05 V and is rated for a nominal 1.464 GHz maximum data rate, while the -1 speed designation corresponds to a maximum operating frequency of 464 MHz in the supplied device data. An FPGA is a reconfigurable digital semiconductor containing programmable logic blocks, block RAM, digital signal processing resources, and programmable I/O. Artix-7 FPGAs occupy the low-power and cost-sensitive level of the AMD FPGA hierarchy, combining programmable hardware with serial transceiver, DSP, and general-purpose logic throughput. The XC7A15T therefore serves as a compact hardware platform for parallel data acquisition, protocol conversion, control, and embedded signal-processing functions. The XC7A15T-1CSG324C provides 1,300 configurable logic blocks, 900 KB of block RAM, 210 I/Os, and integrated DSP resources. Its nominal 1 V core supply allows implementation on a 0.95 V to 1.05 V power rail. MMCM and PLL resources support clock generation and management, while the high I/O count permits interfaces to external memory, converters, network transceivers, and industrial peripherals. The device combines configurable logic with dedicated hard resources for high-throughput digital processing. Block RAM can buffer sampled data or store lookup tables, while DSP slices accelerate multiply-and-accumulate operations commonly required by filtering and waveform transformations. The -1 performance designation establishes the device's timing class; implementation timing must still be checked against the selected AMD toolchain, pin constraints, clocking plan, and system-level I/O timing requirements. Typical uses include industrial automation, machine-vision image processing, communications protocol bridging, low-cost test equipment, and embedded real-time signal processing. Its 210-I/O footprint is especially useful when a design requires numerous parallel connections while retaining programmable logic and DSP capability in one device. Board design should follow the AMD Artix-7 package pinout files and UG475 guidance, particularly for power, ground, configuration, clock, and high-speed I/O connections. Decoupling, signal-integrity checks, thermal planning, configuration-interface design, and bank-specific voltage constraints should be completed before layout release. This page combines manufacturer and distributor data with the supplied cross-reference results to summarize device identity, procurement considerations, verified alternatives, and practical FPGA design guidance. The listed LCSC price is a product-page reference rather than a guaranteed quotation, so availability and volume pricing should be reconfirmed before purchase.

RFQ رابطہ
XC7A15T-1CSG324I - 16,640-LC Artix-7 FPGA | AMD
XC7A15T-1CSG324I

XC7A15T-1CSG324I - 16,640-LC Artix-7 FPGA | AMD

AMD XC7A15T-1CSG324I is an Artix-7 field-programmable gate array with 16,640 logic cells, 210 I/Os and 45 DSP slices in a 324-CSPBGA package. It uses 28 nm fabrication technology, operates from a 1 V core supply and is specified for the industrial temperature range of -40 °C to +100 °C junction temperature. The device is a cost-sensitive FPGA platform intended for compact, high-volume embedded systems requiring programmable logic, DSP and parallel I/O. An FPGA is a semiconductor whose digital logic, interconnect and signal-processing resources are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic semiconductor and a reconfigurable digital IC. The XC7A15T belongs to AMD's Artix-7 family, combining general-purpose programmable logic with block RAM, DSP48 processing and high-performance I/O in a relatively small package. The verified specifications identify 16,640 logic cells, 210 I/Os, 921,600 internal configuration bits and 45 DSP slices. Its 324-CSPBGA package is identified in distributor records as a 324-LFBGA/CSPBGA, while an independent market listing specifies a 15 mm × 15 mm body. The -1 suffix denotes the device speed grade, the CSG324 suffix identifies the package, and the I suffix identifies industrial-temperature production. The Artix-7 architecture supports parallel processing, programmable I/O and dedicated DSP resources rather than implementing the complete design in fixed-function logic. This allows the same board design to be reused across multiple product variants through bitstream changes. The 45 DSP slices are especially relevant to filtering, fixed-point arithmetic, signal conditioning and control-loop workloads, while 210 I/Os support parallel buses, sensor acquisition and external memory interfaces. Typical applications include industrial automation, test and measurement, embedded control, communications, camera and image-processing interfaces, and compact instrumentation. The device is appropriate when deterministic parallel I/O and field-updatable logic are more valuable than the very high performance or very high logic density available from larger FPGA families. A complete design still requires suitable memory, clocking, power rails and high-speed PCB layout. Designers should use the AMD package pinout files and UG475 package guidance to map every CSG324 ball. Power, decoupling, configuration access, clocking and high-speed routing must follow the manufacturer's Artix-7 guidance. The industrial temperature rating applies to junction temperature and must be considered together with actual enclosure temperature, board heating and the device's power dissipation. This page consolidates verified distributor specifications, package details, temperature and speed-grade information into an engineering-focused selection reference. It also distinguishes documented drop-in options from unverified equivalents, provides comparison parameters, and identifies the application constraints that require datasheet and board-level review before procurement.

RFQ رابطہ
XC7A15T-1CSG325C - 16,640-Cell Artix-7 FPGA | AMD
XC7A15T-1CSG325C

XC7A15T-1CSG325C - 16,640-Cell Artix-7 FPGA | AMD

The AMD XC7A15T-1CSG325C is an Artix-7 field-programmable gate array with 16,640 logic cells, 150 I/Os, and a 324-CSPBGA package measuring 15 x 15 mm. It operates on a 28 nm process and combines programmable logic, DSP resources, block RAM, programmable I/O, clock management, and analog mixed-signal features in a compact surface-mount package. An FPGA is a reconfigurable digital semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA can be programmed after manufacture to implement logic, signal processing, control, and interface functions. Artix-7 belongs to the broader 7-series FPGA hierarchy and targets cost-sensitive, small-form-factor, high-volume systems that need substantial parallel processing without the power envelope of larger FPGA families. Key device attributes include 16,640 logic cells, 921,600 block-RAM bits, 150 user I/Os, and a stated operating-temperature range of -40C to +100C. The -1 speed designation identifies the device performance grade within the XC7A15T family. Its 324-CSPBGA package provides a compact option for dense boards, although the fine ball pitch requires careful PCB layout, assembly process control, and package-aware thermal design. The architecture supports parallel datapaths and fixed hardware resources that can be combined through programmable interconnects. This makes the FPGA useful for control logic, image and video pipelines, sensor-data acquisition, industrial automation, communications interfaces, and embedded test systems. The combination of programmable logic and dedicated resources allows designers to implement multiple parallel operations in one device while retaining the flexibility of field updates. Typical use cases include industrial machine vision, low-cost data acquisition, compact control systems, network-interface bridges, and embedded signal-processing platforms. In each application, the principal advantages are parallel throughput, flexible I/O, reusable hardware architecture, and shorter development cycles compared with a dedicated ASIC. Design trade-offs include BGA assembly complexity, tool licensing, configuration requirements, and the need for careful timing, power, and signal-integrity analysis. For implementation, begin with the AMD package pinout files and the Artix-7 documentation before assigning PCB ball locations. Keep high-speed routing short, provide the required decoupling and configuration circuitry, and validate every power and ground connection against the device documentation. Migration among compatible XC7A15T speed-grade or temperature-grade options should be checked for timing, qualification, and design-tool support. This product page consolidates device specifications, package and pinout resources, sourcing information, same-footprint alternatives, and application-focused engineering guidance to support design selection and board planning for the XC7A15T-1CSG325C.

RFQ رابطہ
XC7A15T-1FTG256C - 16,640-Cell Artix-7 FPGA | AMD
XC7A15T-1FTG256C

XC7A15T-1FTG256C - 16,640-Cell Artix-7 FPGA | AMD

The AMD XC7A15T-1FTG256C is an Artix-7 field-programmable gate array with 16,640 logic cells, 170 I/Os, and operation up to 464 MHz in a 256-ball FTBGA package. Designed for cost-sensitive, power-efficient embedded systems, this device combines programmable logic, DSP processing, block RAM, MMCM, PLL, and analog mixed-signal resources in a single 28 nm FPGA. An FPGA is a semiconductor whose digital logic, interconnect, and dedicated processing blocks are configured through a bitstream after fabrication. The Artix-7 family belongs to the broader programmable-logic hierarchy: FPGA, programmable logic device, digital semiconductor, and integrated circuit. This balance of logic density, I/O availability, and processing capability makes the XC7A15T suitable for embedded control, communications, industrial automation, machine vision, and prototype hardware. Key features include 16,640 programmable logic cells, 170 user I/Os, a maximum clock rating of 464 MHz, and a 950 mV to 1.05 V core-voltage range identified in the verified sources. The device also includes MMCM and PLL resources according to the product listing, along with DSP and analog mixed-signal capabilities described for the Artix-7 family. The -1 suffix identifies the device speed grade, while the C suffix denotes the commercial temperature option. The 256-ball FTBGA package supports dense board integration without relying on a large leaded footprint. Because a complete, verified ball-by-ball pin list was not included in the supplied source set, engineers should use AMD's official Artix-7 package pinout files before assigning signals, power planes, or configuration pins. Device configuration, I/O standards, and board-level connectivity must follow those package-specific files rather than general device assumptions. Typical uses include industrial controllers, communication equipment, machine-vision preprocessing, software-defined radio signal processing, sensor fusion, and rapidly deployed FPGA prototypes. In these systems, parallel programmable logic can implement interfaces or protocol engines, DSP slices can accelerate filters and transforms, and block RAM can buffer captured or transmitted data. Design planning should begin with AMD's Vivado or compatible FPGA design tools and the exact Artix-7 device constraints. Check timing at the selected -1 speed grade, validate I/O standards against the board, and plan decoupling and power delivery for the 0.95 V to 1.05 V core supply. This page combines verified catalog data, sourcing details, and engineering guidance beyond a basic distributor listing.

RFQ رابطہ
XC7A15T-1FTG256I - 16,640-Cell Artix-7 FPGA | AMD
XC7A15T-1FTG256I

XC7A15T-1FTG256I - 16,640-Cell Artix-7 FPGA | AMD

The AMD XC7A15T-1FTG256I is an Artix-7 field-programmable gate array with 16,640 logic cells, 170 I/O, a 464 MHz operating frequency, and a 256-ball FTBGA package. Designed for the industrial temperature grade, it combines programmable logic, DSP processing, PLL and MMCM clocking, and analog mixed-signal resources in a cost-optimized FPGA platform. The device operates from a 950 mV to 1.05 V core supply range. An FPGA is a semiconductor whose digital and mixed-signal functions are defined by a downloadable configuration. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor, while Artix-7 is AMD's low-cost, low-power FPGA family. This positioning makes the XC7A15T useful where designers need flexible parallel processing, interface adaptation, control logic, or DSP without developing fixed-function silicon. The 16,640-cell Artix-7 fabric provides the core implementation capacity, while 170 I/Os support connections to external memories, converters, sensors, displays, and communications equipment. The listed 464 MHz figure establishes the device's advertised operating-frequency class. Integrated DSP, PLL, and MMCM resources reduce the need for separate clock-generation or arithmetic components when the required functions fit within the FPGA fabric. The -1 portion identifies the speed grade, FTG256 identifies the 256-ball package, and the final I indicates the industrial temperature grade. Verified distributor information identifies an industrial-temperature variant with the same logic density and package. Its 950 mV to 1.05 V supply range is important during power-supply design because the core, auxiliary rails, I/O standards, and configuration system must be planned together rather than treated as a single fixed-voltage domain. Typical uses include industrial automation and control, communications interface consolidation, sensor and instrumentation systems, video-processing pipelines, and low-cost embedded DSP. These application descriptions are consistent with the Artix-7 family's stated combination of programmable logic, DSP processing, clock management, and analog mixed-signal integration. For a new board, the FTG256 footprint requires a dense ball-layout PCB, careful power-plane design, and careful separation of sensitive analog or clock paths. For an existing design, migration requires checking the exact package pinout, supported I/O standards, configuration interface, power rails, timing constraints, and installed Vivado or another supported AMD implementation tool. This page consolidates verified distributor specifications, package and pinout resources, same-family drop-in candidates, practical design guidance, and a parameter comparison to support component selection and procurement. It does not substitute for the complete Artix-7 data sheet, package files, and design-tool timing reports.

RFQ رابطہ
XC7A15T-2CSG325I - 16,640-Cell Artix-7 FPGA | AMD
XC7A15T-2CSG325I

XC7A15T-2CSG325I - 16,640-Cell Artix-7 FPGA | AMD

The AMD Xilinx XC7A15T-2CSG325I is an Artix-7 field-programmable gate array with 16,640 logic cells, 921,600 block-RAM bits, 150 I/Os, and a -2 speed grade, housed in a 325-pin chip-scale BGA package. The device is manufactured on 28 nm technology and supports core-voltage operation from 950 mV to 1.05 V, making it suitable for compact programmable-logic, signal-processing, and communications systems. An FPGA is a reconfigurable semiconductor in which programmable logic blocks, memory, and I/O resources are configured after manufacture. The XC7A15T belongs to the Artix-7 family, a field-programmable gate array within the broader programmable-logic and semiconductor hierarchy. Its combination of moderate logic density, embedded block RAM, analog mixed-signal resources, and a relatively compact BGA package supports designs requiring deterministic parallel processing without a large discrete processor footprint. The Artix-7 architecture provides 16,640 configurable logic cells and 921,600 bits of block RAM for finite-state machines, data acquisition, control logic, and parallel arithmetic. The device exposes 150 user I/Os and includes clock-management and PLL resources identified in the part documentation. Its 28 nm process technology supports a performance-per-watt design position aimed at cost-sensitive embedded, industrial, communications, and test systems. The XC7A15T-2CSG325I is specified as the -2 speed grade and is identified in the part description as an industrial-temperature option operating from -40°C to +100°C. The 950 mV to 1.05 V core-voltage range indicates that board-level power delivery must meet the voltage requirements of the selected configuration and operating condition. Because the device is a BGA package, assembly process control, thermal management, and escape-routing planning are central to a successful implementation. Typical applications include industrial control and automation, camera and image-processing pipelines, communications interface logic, instrumentation, embedded signal processing, and general-purpose prototyping. The 150 I/Os are useful for parallel sensors, displays, converters, and digital interfaces, while the 921,600 RAM bits can buffer data between parallel processing stages. The compact CSG325 package also helps reduce board area compared with larger FPGA options. Board designers should use the AMD Artix-7 package pinout files and UG475 when assigning every CSG325 ball and its power, ground, configuration, clock, and user-I/O functions. Validate the complete power rails, decoupling network, configuration interface, clocking plan, and JTAG implementation against the device documentation before routing the PCB. This product page combines the exact CSG325 package characteristics, relevant same-footprint options, and practical FPGA design guidance. It helps engineers distinguish the XC7A15T-2CSG325I from other speed grades and packages while supporting faster package, replacement, procurement, and design decisions.

RFQ رابطہ
XC7A15T-2FTG256C - 16,640 LEs Artix-7 FPGA | AMD
XC7A15T-2FTG256C

XC7A15T-2FTG256C - 16,640 LEs Artix-7 FPGA | AMD

AMD XC7A15T-2FTG256C is an Artix-7 field-programmable gate array with 16,640 logic cells, 170 I/O, 921,600 RAM bits, and a 256-LBGA package. The -2 speed grade is intended for cost-sensitive, power-efficient designs requiring a balanced combination of programmable logic, DSP processing capability, and high-speed serial connectivity. It operates across the commercial temperature range of 0°C to +85°C and is available from distributors as a 256-LBGA FPGA. An FPGA is a reconfigurable digital semiconductor in which the logic, interconnections, and processing resources are configured after manufacture. Within the product hierarchy, the XC7A15T belongs to the Artix-7 FPGA family and combines a programmable logic array, block RAM, DSP resources, and general-purpose input/output blocks in one device. This integration allows designers to implement parallel data processing, control logic, protocol bridging, and interface functions on a single programmable chip. The principal verified device figures are 16,640 logic cells, 921,600 RAM bits, 170 I/O, and a 256-LBGA package. The -2 designation identifies its performance grade within the Artix-7 family. Its low-cost and power-efficient positioning makes it relevant to industrial automation, machine vision, telecommunications infrastructure, protocol conversion, baseband processing, wireless backhaul, and embedded control systems. The 256-LBGA package also supports compact, high-density board layouts. Technically, the device combines programmable logic fabric with dedicated memory and DSP blocks, allowing multiple data paths to be processed concurrently. The large 170-I/O count provides substantial connectivity for external memory, sensors, network transceivers, display interfaces, and control peripherals. Its 921,600 RAM bits support buffering and data storage within the FPGA fabric, while the dedicated DSP capability enables fixed-point filtering, transform, and signal-processing functions without requiring separate accelerators. Typical implementations place the FPGA beside high-speed transceivers, external memory, clock sources, and application-specific peripherals. Machine-vision designs can parallelize image acquisition and filtering, telecom equipment can perform line-card adaptation or protocol bridging, and industrial controllers can combine sensor acquisition with deterministic logic. Because FPGA resources are configurable, the same family can support multiple product variants without changing the PCB footprint when device density and speed-grade requirements permit. Designers should review the manufacturer Artix-7 datasheet and package pinout files before assigning bank voltages, clock pins, high-speed serial pins, and power rails. Decoupling, PCB return paths, thermal management, configuration interface access, and proper I/O standard selection are critical to reliable implementation. Although the 256-LBGA offers high I/O density, its fine-pitch routing and power-delivery requirements demand careful constraint-driven layout and multilayer PCB planning. This product data combines verified distributor pricing, Artix-7 family specifications, package information, and practical engineering guidance. It also distinguishes true same-package drop-in options from broader functional FPGA alternatives, helping engineers shortlist a device while still validating timing, power, configuration, and lifecycle requirements against the official AMD documentation.

RFQ رابطہ
XC7A15T-3FTG256E - 16,640 Logic Cells, 170 I/O | AMD
XC7A15T-3FTG256E

XC7A15T-3FTG256E - 16,640 Logic Cells, 170 I/O | AMD

AMD XC7A15T-3FTG256E is an Artix-7 field-programmable gate array with 16,640 logic cells, 921,600 RAM bits, 170 I/O, and a 1 V operating voltage, housed in a 256-pin FTG256 ball grid array package. The -3 speed grade targets higher-performance designs, while the E suffix identifies the extended-temperature option. Built on 28 nm FPGA technology, this device combines programmable logic resources with embedded block RAM, programmable I/O, and configurable interface functionality. A field-programmable gate array, or FPGA, is a semiconductor whose logic, interconnect, memory, and I/O resources can be configured after manufacture. Within the product hierarchy, the XC7A15T belongs to the Artix-7 FPGA family and the broader programmable-logic semiconductor category. Its 16,640 logic cells provide moderate implementation capacity for embedded control, signal processing, communications, instrumentation, and general-purpose programmable systems. The verified device data identifies 921,600 RAM bits for embedded memory and 170 user I/O. Cross-reference material describes the device using either 2,600 logic blocks or 1,300 LAB/CLB groupings, reflecting different counting conventions for the same 16,640-logic-cell device. The target operates from a 1 V core supply, enabling the energy-efficient 28 nm architecture associated with the Artix-7 family. The FTG256 package uses 256 BGA sites and is intended for surface-mount PCB assembly. BGA construction supports compact designs but requires careful escape-routing, ground-plane continuity, via-in-pad considerations where appropriate, and assembly process control. AMD package pinout resources are available for board-layout validation, while the complete electrical and timing limits must be taken from the manufacturer data sheet. Typical uses include industrial automation, test and measurement, embedded video and control, low-cost communications equipment, sensor processing, and education or prototyping platforms. The 170 I/O make it especially relevant to designs needing multiple parallel digital interfaces while retaining substantial programmable logic capacity. Designers should verify power sequencing, decoupling, signal integrity, configuration interface requirements, and exposed thermal behavior against the manufacturer documentation. Migration candidates must be checked for package, speed grade, temperature range, configuration scheme, bank voltage, and pinout rather than relying on the XC7A15T family name alone. This product page consolidates verified distributor specifications, package and pinout resources, source links, and same-package migration options. It also distinguishes directly comparable speed and temperature variants from different-package devices that cannot be treated as drop-in replacements.

RFQ رابطہ
XC7A15T-L1CPG236I - 16,640 Logic Cell Artix-7 FPGA | AMD
XC7A15T-L1CPG236I

XC7A15T-L1CPG236I - 16,640 Logic Cell Artix-7 FPGA | AMD

AMD XC7A15T-L1CPG236I is an Artix-7 field-programmable gate array with 16,640 logic cells, 921,600 RAM bits, and 106 user I/O in a 236-pin CSPBGA package. The device combines a programmable-logic fabric, block RAM, digital signal processing resources, and programmable input/output blocks on a 28 nm FPGA platform. Its 236-ball package supports dense board-level integration while providing 106 external user I/O for parallel interfaces, control buses, high-speed serial links, and mixed-signal interfacing. A field-programmable gate array, or FPGA, is a semiconductor device whose digital logic and interconnect can be configured after manufacture. An FPGA sits within the broader hierarchy of programmable logic devices, semiconductors, and digital processing systems. Compared with a fixed-function application-specific integrated circuit, an FPGA permits design changes through programmable bitstreams, shorter development cycles, and parallel implementation of multiple hardware functions in one device. The XC7A15T device family provides 16,640 logic cells, 1,300 configurable logic blocks or logic array blocks, 921,600 bits of block RAM, and 106 user I/O according to AMD product information. These resources support control logic, protocol bridges, data acquisition, packet processing, embedded test functions, and general-purpose digital signal processing. The L1 suffix distinguishes this ordering code from the standard -1 speed-grade ordering code without changing the Artix-7 device family or the 236-pin package identity. The 28 nm programmable-logic architecture combines configurable logic blocks with dedicated block RAM, DSP slices, and I/O resources. The 921,600-bit RAM total supports buffering and temporary data storage within the fabric, while the 106 I/O provide external connectivity for control and data signals. Exact clocking, voltage, power, temperature, and configuration interface details should be selected from the manufacturer ordering guide and Artix-7 data sheet for the complete device specification. Typical uses include industrial control and instrumentation, embedded communications, camera and image-processing pipelines, test equipment, robotics, and low-cost high-performance prototyping. The combination of 16,640 logic cells and 106 I/O is useful for designs that need moderate parallel-processing capacity without moving to a larger FPGA. It is also appropriate for educational and research platforms where programmable hardware supports repeated architecture experiments. For a new PCB, assign power, ground, configuration, clock, and serial interface pins directly from the AMD Artix-7 package pinout files rather than relying on a generic BGA drawing. Preserve the package ball pitch and escape-routing geometry, validate every power and ground connection, and perform signal-integrity and power-integrity simulations before fabrication. Firmware and bitstream generation should use a Vivado release compatible with the installed device and its complete MPN. This product page combines the exact ordering-code information, same-package ordering options, application guidance, and engineering-oriented design notes. It also distinguishes verified device characteristics from parameters that require selection from the full manufacturer documentation before schematic release, PCB layout, or production sourcing decisions.

RFQ رابطہ
XC7A15T-L1CSG325I - 16,640-Cell Low-Power Artix-7 FPGA | AMD
XC7A15T-L1CSG325I

XC7A15T-L1CSG325I - 16,640-Cell Low-Power Artix-7 FPGA | AMD

The AMD XC7A15T-L1CSG325I is a low-power Artix-7 field-programmable gate array with 16,640 programmable logic cells, 150 user I/O, and a 324-ball CSBGA package. Built on 28 nm FPGA technology, the device combines programmable logic, DSP48E2 processing resources, block RAM, and high-speed serial transceivers in a single monolithic device. An FPGA is a reconfigurable digital integrated circuit whose logic, memory, and signal-processing functions are defined after manufacture. The Artix-7 family belongs to AMD's programmable-logic portfolio and is positioned for cost-sensitive, power-conscious designs that need more flexibility than fixed-function logic devices. It supports parallel processing, protocol bridging, control logic, data acquisition, and embedded system integration without requiring a separate application-specific integrated circuit. The XC7A15T-L1CSG325I provides 16,640 logic cells and 150 user I/O in a compact CSG325 package. Its 28 nm process technology supports a core supply of 1 V, while the -L speed designation identifies the lower-power performance grade. The -I suffix identifies the industrial temperature grade, supporting operation across the industrial temperature range when configured with the appropriate I/O standards. Programmable logic in this device can implement parallel datapaths, state machines, packet-processing functions, and control systems. Dedicated DSP slices accelerate fixed-point and filtered arithmetic, while block RAM provides on-chip storage for buffers, queues, and data-aggregation functions. General-purpose I/O can be assigned to common interfaces when voltage, slew-rate, and drive-strength requirements are compatible with the selected bank configuration. Typical uses include industrial control and data acquisition, video and image-processing pipelines, embedded instrumentation, networking equipment, test systems, and compact edge-processing modules. The monolithic FPGA also supports parallel sensor acquisition, where multiple channels can be processed concurrently and then serialized through an external transceiver or high-speed parallel interface. Layout planning should start with the AMD Artix-7 package pinout files, since the CSG325 package exposes hundreds of balls and its assignment differs from the smaller FTG256 and FGG484 options. Confirm power rails, decoupling, configuration access, clocking, and high-speed differential pairs against the device pinout and PCB stack-up before release. This page combines device-specific specifications, package information, drop-in comparison details, sourcing guidance, and practical PCB-design considerations. It supports faster engineering evaluation by consolidating the information normally spread across the Artix-7 data sheet, package pinout files, and individual distributor listings.

RFQ رابطہ
XC7A15T-L1FTG256I - Artix-7 FPGA, 170 I/O, 256-LBGA | AMD
XC7A15T-L1FTG256I

XC7A15T-L1FTG256I - Artix-7 FPGA, 170 I/O, 256-LBGA | AMD

AMD XC7A15T-L1FTG256I is an Artix-7 field-programmable gate array in a 256-LBGA package, with 170 user I/O for programmable digital logic in compact embedded and industrial systems. The device combines configurable logic blocks, programmable input/output resources, and embedded memory in a single semiconductor package. Its Artix-7 architecture supports parallel processing, interface bridging, control logic, and programmable signal handling without relying on a fixed application-specific function. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor. Unlike a conventional microcontroller that executes software instructions, an FPGA implements digital circuits through configurable logic and interconnect resources. Within the product hierarchy, the XC7A15T-L1FTG256I is an FPGA and programmable logic device within AMD's 7 Series and Artix-7 families. The Artix-7 family targets designs that need substantial logic capacity, flexible I/O, and low-power operation without the resources of a larger FPGA family. The most visible configuration figure for this device is its 170 I/O. These I/O resources can be assigned in the design tool to functions such as single-ended or differential digital interfaces, control signals, memory connections, and communications links. The 256-LBGA package also supports compact board layouts, although its fine-pitch ball array requires careful PCB design, inspection, and assembly planning. The XC7A15T-L1FTG256I designation identifies a specific speed, temperature, package, and industrial-grade ordering configuration. The L1 portion indicates a lower-power-oriented performance option within the ordering scheme, while FTG256I identifies the 256-ball FTBGA package and industrial temperature option. Exact core voltage limits, power characteristics, memory quantities, supported interfaces, and temperature limits should be confirmed in the AMD Artix-7 data sheet and the package pinout files before schematic release. Typical applications include industrial control modules, programmable sensor and data-acquisition systems, communications equipment, embedded video processing, robotics, test equipment, and general-purpose interface hubs. The 170 available I/O are especially useful when a design must connect external memories, converters, transceivers, sensors, and control peripherals while retaining flexible pin assignment. A critical implementation consideration is the 256-LBGA footprint. Use the AMD package pinout files to assign every power, ground, configuration, clock, and user I/O ball, then validate the escape routing and layer stack with the board fabricator. Do not infer package-ball functions from the generic 7 Series family naming alone. This product record combines the exact XC7A15T-L1FTG256I ordering information, available Artix-7 package resources, pin-compatible same-family alternatives, and practical implementation guidance. The design decisions should be finalized against the AMD data sheet, UG475 package guidance, and the complete pinout file for the selected device.

RFQ رابطہ
XC7A15T-L2CPG236E - 28nm Artix-7 FPGA | AMD
XC7A15T-L2CPG236E

XC7A15T-L2CPG236E - 28nm Artix-7 FPGA | AMD

AMD XC7A15T-L2CPG236E is an Artix-7 field-programmable gate array built on 28 nm high-performance low-power process technology, with 16,640 logic cells, 106 I/O, and a 236-pin CSBGA package. The -L2 ordering code identifies the low-power family and -2 speed grade, while the CPG236 designation identifies the compact ball-grid-array package. An FPGA is a programmable logic semiconductor whose digital circuits are configured after manufacture. Within the product hierarchy, the XC7A15T-L2CPG236E is an Artix-7 FPGA, a field-programmable gate array, a programmable-logic device, and ultimately a semiconductor. Artix-7 devices combine configurable logic blocks, programmable I/O, block RAM, digital signal processing resources, and programmable interconnect to implement control logic, signal processing, interface bridging, and embedded systems. The device provides 16,640 logic cells and 106 I/O in a CSBGA package rated by the manufacturer listing for 1 V operation. Its 28 nm process technology supports a compact implementation of moderately complex digital systems. The -L2 speed grade is intended for designs where lower power consumption is more important than the maximum performance available from faster Artix-7 speed grades. Exact timing, memory, and power ratings should be selected from the appropriate Artix-7 datasheet for the complete device ordering code. The Artix-7 architecture supports programmable logic, dedicated block RAM, and DSP resources. These blocks can be combined for parallel data pipelines, control processors, communications interfaces, video timing, and instrumentation. The CPG236 package provides 236 package balls and a 0.500 mm fine-pitch arrangement according to a listing for a closely related L1 device; the target listing identifies the device as a 236-pin CSBGA. Board design must follow the official package pinout and escape-routing guidance. Typical uses include industrial control, test and measurement, embedded communications, camera and image-processing pipelines, audio interfaces, and compact embedded systems. The combination of 16,640 logic cells and 106 I/O is suitable for designs requiring substantial parallel logic without moving to a larger FPGA. A low-power speed grade can also help control total system energy in continuously operating equipment. A critical implementation step is to preserve the power architecture and ball assignments of the CPG236 package during schematic capture and PCB layout. Decoupling, auxiliary-voltage sequencing, configuration-source wiring, clocking, and high-speed I/O routing must be checked against the manufacturer package files and Artix-7 design documentation before fabrication. This product record combines the target's verified package, process, logic-cell, I/O, and voltage details with same-package migration options, engineering comparison points, and practical implementation guidance. It is intended to accelerate component selection while preserving the validation required for FPGA timing, power, pinout, and lifecycle decisions.

RFQ رابطہ