مصنوعات (44,000+)

XC7A15T-L2CSG324E - 16,640-LC Artix-7 FPGA | AMD
XC7A15T-L2CSG324E

XC7A15T-L2CSG324E - 16,640-LC Artix-7 FPGA | AMD

AMD XC7A15T-L2CSG324E is an Artix-7 field-programmable gate array with 16,640 logic cells, 210 DSP slices and 921,600 bits of block RAM, housed in a 324-terminal CSPBGA package. It is manufactured on a 28 nm process and supports a nominal 1.0 V core supply, I/O operation up to 3.465 V and a stated maximum frequency of 200 MHz. An FPGA is a programmable logic device that combines configurable logic blocks, programmable I/O, memory resources and digital signal processing into one semiconductor. The Artix-7 family belongs to the FPGA and CPLD hierarchy within programmable logic devices. It targets designs requiring more parallel processing capability than a microcontroller while avoiding the power, complexity and cost of a larger FPGA platform. Key resources include 1,300 configurable logic blocks, 16,640 logic cells, 210 DSP slices and 921,600 bits of block RAM. The -2 speed grade supports performance-oriented designs, while the CSG324 package provides 210 I/O positions in a compact 15 x 15 mm, 0.8 mm-pitch ball-grid-array format. The device supports JTAG programming and is identified by AMD as the XC7A15T member of the Artix-7 family. The 28 nm architecture supports an energy-efficient balance between configurable logic, dedicated DSP and block RAM. For parallel datapaths, the 210 DSP slices can accelerate fixed-point operations without consuming general-purpose logic. The 921,600-bit block RAM provides dedicated storage for buffering, packet processing and control-plane data, while 16,640 logic cells implement state machines, interfaces and supervisory logic. Typical uses include industrial control, network packet processing, embedded vision, instrumentation and communications equipment. The same part can serve as a compact prototyping platform for parallel algorithms, as a final compact control-logic device in production equipment, or as a bridge between high-speed serial links and parallel processing blocks. Its compact BGA package requires careful PCB layout and thermal validation. When assigning pins, use the CSG324 package files referenced by AMD UG475 rather than relying on a generic symbol. Confirm the power rails, decoupling, configuration interface and bank-specific I/O voltage limits against the XC7A15T datasheet. BGA assembly also requires appropriate stencil, via-in-pad, solder-paste and X-ray inspection practices. This page combines the exact device identity, verified resource counts, package details, same-footprint family alternatives and practical migration guidance. It highlights the distinctions between speed and temperature-grade suffixes so engineers can choose a replacement without assuming that every CSG324 Artix-7 ordering code has identical qualification requirements.

RFQ رابطہ
XC7A200T-1FB484C - 215,360-LCell Artix-7 FPGA | AMD
XC7A200T-1FB484C

XC7A200T-1FB484C - 215,360-LCell Artix-7 FPGA | AMD

The AMD XC7A200T-1FB484C is an Artix-7 field-programmable gate array with 215,360 logic cells, 285 user I/Os, and a speed grade of 1 in a 484-ball FCBGA package. The device combines programmable logic, DSP resources, block RAM, programmable I/O, and dedicated clocking resources in a single low-power device for compact control, signal-processing, and communications systems. A field-programmable gate array is a semiconductor whose digital functionality is configured after manufacture. An FPGA belongs to the broader programmable-logic hierarchy, where it sits above basic programmable devices and provides substantially greater parallelism than a microcontroller or fixed-function logic device. The Artix-7 family combines that programmable flexibility with a programmable logic architecture optimized for low power consumption and high performance in cost-sensitive embedded systems. The XC7A200T-1FB484C provides 215,360 logic cells and 285 I/O positions, according to the AMD Artix-7 family data. Its speed grade 1 designation identifies the intended performance class, while the FCBGA package supports dense board-level connections for designs requiring substantial signal routing. The device also includes digital signal processing and memory resources, making it suitable for parallel data acquisition, signal conditioning, embedded control, and communication-interface functions. Artix-7 devices use configurable logic blocks, dedicated DSP slices, block RAM, and multiplexed input/output resources. These resources allow parallel datapaths to be implemented without relying on a sequence of processor instructions. The XC7A200T-1FB484C is particularly useful when several independent channels must be sampled, filtered, transformed, or checked concurrently, because fixed sequential processing can become a bottleneck as channel count increases. Typical uses include industrial automation, test and measurement equipment, medical instrumentation, embedded vision, audio and signal processing, communications infrastructure, and low-power embedded control. A board designer would normally pair the FPGA with external memory, clock sources, transceivers, analog converters, power regulators, and high-speed differential interfaces when the design exceeds the capabilities of the on-chip resources. The most important layout consideration is power and signal integrity. Place the decoupling network at each supply pin, provide a clean ground-plane structure, and follow the AMD package pinout and PCB design guidance for ball assignments and high-speed routing. Verify the exact power rails, configuration interface, and termination requirements against the manufacturer documentation before releasing the PCB. This page combines the component specifications, replacement options, application guidance, comparison data, and practical integration notes needed to evaluate the XC7A200T-1FB484C for a new programmable-logic design.

RFQ رابطہ
XC7A200T-1FB484I - 215K-Cell Artix-7 FPGA | AMD | Industrial
XC7A200T-1FB484I

XC7A200T-1FB484I - 215K-Cell Artix-7 FPGA | AMD | Industrial

AMD XC7A200T-1FB484I is an Artix-7 field-programmable gate array built on 28 nm process technology, with 215,360 programmable logic cells, 285,000 system logic cells, and 485,360 register bits. The device is supplied in a 484-ball, lidless FCBGA package measuring 23 x 23 mm with a 1.0 mm ball pitch. Its ordering code identifies a speed grade of 1 and an industrial-temperature option. An FPGA is a programmable semiconductor in the broader hierarchy of programmable logic devices, logic integrated circuits, and digital semiconductors. Artix-7 devices combine configurable logic, block RAM, programmable input/output, and dedicated clocking resources on one device. This combination allows designers to implement parallel digital logic, interface adaptation, signal processing, and embedded control functions without relying on a fixed application-specific circuit. The XC7A200T-1FB484I provides 215,360 logic cells, 134,553,60 as presented by the distributor record, 485,360 register bits, and an operating core voltage identified as 1 V. The industrial ordering suffix selects extended-temperature suitability, while the speed-grade 1 suffix indicates the device performance class within the Artix-7 family. Its 484-ball fine-pitch package supports high-density connections while requiring careful PCB layout, thermal analysis, and assembly control. The Artix-7 architecture is suitable for designs that require more parallelism than a microcontroller or discrete logic implementation can provide. Its fabric can host parallel data paths, control state machines, protocol bridges, and fixed-pipeline processing blocks. Dedicated memory resources support buffering and data alignment, while programmable I/O can accommodate multiple interface standards within the electrical limits of the selected banks and package pins. Typical applications include industrial automation, camera and imaging control, communications infrastructure, test and measurement systems, instrumentation, and embedded signal-processing equipment. The device is also appropriate for prototype platforms where programmable logic allows interfaces, timing, and control algorithms to be revised without changing the PCB. The primary design consideration is the fine-pitch BGA land pattern. A qualified PCB stack-up, escape-routing strategy, power-distribution network, and assembly process are necessary for reliable manufacture. Designers should also confirm the exact pinout, supported I/O standards, configuration method, and power requirements in AMD package documentation before releasing the hardware. This product record combines the verified device identity, package information, family-level architecture, and engineering guidance with commercial forms for quotation, availability, and lifecycle review. It also provides focused selection criteria for distinguishing speed-grade, temperature-grade, and package variants before design commitment.

RFQ رابطہ
XC7A200T-1FB676I - 215K-Cell Artix-7 FPGA | AMD
XC7A200T-1FB676I

XC7A200T-1FB676I - 215K-Cell Artix-7 FPGA | AMD

The AMD XC7A200T-1FB676I is an Artix-7 field-programmable gate array with 215,360 logic cells, 400 I/O, 28 nm process technology, and a 676-pin FCBGA package. It combines programmable logic density with integrated memory, clock-management, and high-speed transceiver capabilities for cost-sensitive embedded, industrial, communications, and signal-processing systems. An FPGA is a semiconductor whose digital circuits are configured after manufacture. Within the product hierarchy, the XC7A200T is an Artix-7 FPGA, a configurable logic device within the broader programmable-logic and semiconductor categories. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA allows designers to implement parallel processing, custom interfaces, control logic, and hardware acceleration in one device. The device provides 215,360 logic cells, 400 I/O, 13,455,360 bits of block RAM, and a nominal 1 V operating class, according to the AMD Artix-7 datasheet. The 28 nm fabrication process supports a compact implementation with configurable logic resources for data acquisition, protocol handling, image processing, embedded control, and communications infrastructure. The -1 suffix identifies the device speed grade, while the -I suffix identifies the associated temperature or qualification option. The FBG676 package provides 676 ball-grid contacts and supports the high I/O count needed by systems combining parallel data paths, external memory, high-speed serial links, and general-purpose control. Package-specific decoupling, power delivery, and escape-routing guidance must follow the AMD package data. Typical applications include industrial automation, test and measurement, communications infrastructure, video and image processing, embedded control, and high-throughput signal acquisition. In these systems, programmable parallel pipelines can process multiple samples or lanes concurrently, while integrated block RAM reduces external-memory pressure for buffers, packet descriptors, and look-up data. When planning the PCB, provide independent 28 nm FPGA power rails with low-impedance distribution and place bulk and high-frequency decoupling close to the package. Match ball escape routing to the selected board stack-up and verify high-speed transceiver, memory-interface, and differential-I/O constraints against the AMD pinout and layout guidance. This product page combines the key electrical and packaging facts, practical replacement analysis, comparison parameters, and design guidance needed to evaluate the XC7A200T-1FB676I for a new programmable-logic design.

RFQ رابطہ
XC7A200T-1FBG484C - Artix-7 FPGA, 285 I/O, FBG484 | AMD
XC7A200T-1FBG484C

XC7A200T-1FBG484C - Artix-7 FPGA, 285 I/O, FBG484 | AMD

The AMD XC7A200T-1FBG484C is an Artix-7 field-programmable gate array in a 484-ball FCBGA package, with 285 general-purpose I/O and support for MMCM and PLL resources. It is designed for cost-sensitive, small-form-factor, high-volume applications that require programmable logic, parallel processing capability, and flexible I/O density. The device is identified with the -1 speed grade and commercial temperature suffix C in its complete ordering code. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable input/output resources, memory, clock-management circuitry, and dedicated signal-processing resources. The Artix-7 family occupies the lower-cost segment of the Xilinx 7-series FPGA portfolio while providing substantial logic capacity, integrated clocking, and broad general-purpose I/O. This combination makes the XC7A200T suitable for embedded control, industrial automation, test equipment, communications interfaces, and compact embedded systems. The XC7A200T-1FBG484C provides 285 I/O in the FBG484 package and includes MMCM and PLL resources according to the product description. These resources support clock generation, clock conditioning, phase shifting, frequency synthesis, and sequencing in designs where deterministic timing and multiple internal clock domains are required. Programmable I/O allows one device to support multiple external interfaces and board-level requirements. The FBG484 package is a 484-ball FCBGA package. Its dense ball-array construction supports the I/O count and interconnect requirements of the device, but it also requires careful PCB layout, controlled escape routing, and assembly processes capable of handling fine-pitch balls. The package footprint is associated with power delivery, decoupling, signal integrity, and thermal-management work rather than simple point-to-point routing. Typical applications include industrial control systems, instrumentation, embedded vision, communications equipment, and general-purpose embedded processing. In each case, the device can implement parallel logic, control state machines, interface bridging, and clock distribution in a single adaptive device. The -1 speed grade is the principal ordering qualifier to preserve when creating a replacement or equivalent design. Use the FBG484 package pinout files and the manufacturer device documentation when assigning PCB balls, power planes, configuration pins, and bank voltages. Validate all board-level interfaces against the device-specific pinout and power architecture rather than relying on a generic Artix-7 diagram. This product page combines the verified AMD/Xilinx device identity, package information, I/O count, clocking resources, and package pinout reference with practical application guidance for engineers evaluating the XC7A200T-1FBG484C.

RFQ رابطہ
XC7A200T-1FBG484I - 740K Logic Cells FPGA | AMD Xilinx
XC7A200T-1FBG484I

XC7A200T-1FBG484I - 740K Logic Cells FPGA | AMD Xilinx

The AMD Xilinx XC7A200T-1FBG484I is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215K logic slices, and 13 Mb of block RAM in a 484-ball FBGA package. It operates from 0.95V to 1.05V core voltage and supports up to 285 user I/O pins with multiple I/O standards including LVCMOS, LVDS, and HSTL. The device features 740 DSP48E1 slices for high-speed digital signal processing and 10 clock management tiles (CMTs) for robust clock generation and distribution. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that can be configured after manufacturing to implement custom digital circuits. FPGAs sit between ASICs (application-specific integrated circuits) and microprocessors in the design hierarchy, offering the flexibility of software-defined hardware with the parallelism of dedicated logic. The Artix-7 family is optimized for cost-sensitive, high-volume applications requiring high logic density and low power, positioned below the Kintex-7 and Virtex-7 families in AMD's 7-series portfolio. Key features include 285 user I/O pins supporting up to 1.25 Gbps LVDS, 740 DSP48E1 slices with 25x18 multiplier capability, and 10 CMTs providing PLL and MMCM functions. The device also offers 13 Mb of block RAM organized as 365 36Kb blocks, enabling substantial on-chip data storage. The -1 speed grade provides balanced performance with 550 MHz maximum clock frequency, while the industrial temperature range (-40C to +100C) ensures reliable operation in harsh environments. The XC7A200T-1FBG484I is built on AMD's 28nm high-k metal gate (HKMG) process technology, delivering high performance with low static power. The architecture includes configurable logic blocks (CLBs) with 6-input look-up tables (LUTs), dedicated carry chains for arithmetic functions, and shift register capabilities. The device supports partial reconfiguration, allowing dynamic updates to logic functions without full device reprogramming, which is valuable for adaptive systems. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The high DSP count and low-latency I/O make it ideal for real-time signal processing in communications and defense systems. The 484-ball FBGA package with 1.0mm ball pitch enables compact PCB designs while providing adequate thermal dissipation for moderate power levels. When designing with this FPGA, ensure adequate decoupling capacitors on all power rails (VCCINT, VCCAUX, VCCO) and follow AMD's PCB design guidelines for high-speed I/O. The configuration interface supports multiple modes including JTAG, SPI, and SelectMAP, allowing flexible system integration. Power sequencing must follow the recommended ramp rates to avoid latch-up or configuration failures.

USD $38.50 رابطہ
XC7A200T-1FBG676C - 215K-L Cell Artix-7 FPGA | AMD
XC7A200T-1FBG676C

XC7A200T-1FBG676C - 215K-L Cell Artix-7 FPGA | AMD

AMD XC7A200T-1FBG676C is an Artix-7 field-programmable gate array with 215,360 logic cells, 400 I/O, 13,140 Kb of block RAM, and 740 DSP slices, supplied in a 676-terminal FCBGA package measuring 27 mm by 27 mm. The device uses 28 nm technology, operates from 0.95 V to 1.05 V, and is specified for the -1 commercial speed grade with a 0°C to 85°C operating-temperature range. An FPGA is a reconfigurable semiconductor in the programmable-logic hierarchy of digital semiconductors. Its configurable lookup tables, routing network, block RAM, programmable I/O, DSP resources, and dedicated clocking fabric allow one physical device to implement multiple digital functions. Vivado Design Suite and standard FPGA development tools configure the architecture and connect external processors, memory, transceivers, sensors, and industrial interfaces. Artix-7 combines substantial programmable logic with low-power, cost-sensitive operation. The XC7A200T provides 215,360 logic cells and 740 DSP slices, making it suitable for demanding parallel-processing and signal-processing designs. Its 13,140 Kb of block RAM supports buffering, packet storage, data acquisition, and general-purpose compute. The 400-I/O interface increases connectivity to external memory, control processors, transceivers, and high-speed peripherals, while the -1 speed grade provides a defined performance and thermal operating point for commercial systems. The 676-pin FCBGA package creates a dense but demanding board-level implementation. Power delivery must cover multiple supply rails, and proper decoupling, via distribution, and thermal management are necessary to preserve signal integrity and performance. Its 27 mm by 27 mm land pattern requires careful escape routing, whereas its large I/O count provides more flexibility than smaller Artix-7 packages. Configuration, clocking, and JTAG access remain essential elements of the complete design. Typical applications include industrial vision, network and communications equipment, instrumentation, embedded signal processing, control systems, and high-throughput digital logic. The 740 DSP slices are especially valuable for filtering, fixed-point arithmetic, and parallel algorithms. The 400 I/Os can connect external memory and multiple peripherals, although high-speed interfaces still require careful board-level timing and impedance-control techniques. The main engineering trade-off is package density. FBG676 offers extensive I/O and programmable resources but requires a fine-pitch PCB, a large exposed thermal solution, and meticulous power-plane design. Choose it when 400 I/O, 13,140 Kb of block RAM, and 740 DSP slices are required; select a smaller Artix-7 package when lower I/O count, easier routing, or lower board complexity is sufficient. This product analysis consolidates device capacity, package details, drop-in suffix alternatives, and practical FPGA design guidance into an engineering-focused reference. It also distinguishes the XC7A200T-1FBG676C from faster, industrial-temperature, and lower-power variants that share the FBG676 footprint.

RFQ رابطہ
XC7A200T-1FBG676I - 740K Logic Cells FPGA | AMD Xilinx | FBG676
XC7A200T-1FBG676I

XC7A200T-1FBG676I - 740K Logic Cells FPGA | AMD Xilinx | FBG676

The AMD Xilinx XC7A200T-1FBG676I is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215,360 logic slices, and 13,140 Kb of Block RAM in a 676-ball FCBGA (FBG676) package. It operates with a core voltage of 1.0V and supports I/O standards up to 3.3V, making it suitable for a wide range of high-speed digital designs. Data verified as of 2026-08-05. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, offering reconfigurable logic blocks and programmable interconnects. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which are a subset of digital integrated circuits. They provide a flexible alternative to ASICs, enabling rapid prototyping and hardware acceleration without the high NRE costs of custom silicon. Key features include 740K logic cells, 365 DSP48E1 slices, 10.5 Mb of distributed RAM, and 13,140 Kb of Block RAM. The device supports up to 400 I/O pins with SelectIO technology, offering programmable I/O standards and speeds. It also includes integrated PCIe blocks, Gigabit Transceivers (GTX) for high-speed serial communication, and a XADC for analog-to-digital conversion, providing a comprehensive platform for complex digital systems. The Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, balancing performance and power efficiency. The device features a configurable logic block (CLB) structure with 6-input LUTs, dedicated carry chains, and flip-flops, enabling efficient implementation of complex logic functions. The DSP48E1 slices support high-speed arithmetic operations, while the Block RAM provides on-chip storage for data buffering and FIFO implementations. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The high logic density and DSP resources make it ideal for signal processing tasks, while the transceivers enable high-speed data communication in networking and broadcast equipment. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) with proper sequencing, and the 676-ball BGA package demands a multi-layer PCB with adequate thermal vias for heat dissipation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the AMD datasheet.

USD $390.00 رابطہ
XC7A200T-1FF1156I - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-1FF1156I

XC7A200T-1FF1156I - 215K Logic Cell Artix-7 FPGA | AMD

AMD XC7A200T-1FF1156I is an Artix-7 field-programmable gate array with 215,360 logic elements, 500 general-purpose I/O pins, and 13,455,360 RAM bits in a 1156-ball FCBGA package measuring 35 mm by 35 mm. The device is intended for high-performance programmable logic applications requiring substantial parallel processing, memory, and external connectivity. An FPGA is a semiconductor whose digital logic, memory blocks, and I/O behavior are configured after manufacture. In the device hierarchy, the XC7A200T belongs to the Artix-7 family of programmable logic devices, positioned between fixed-function logic ICs and larger field-programmable gate arrays. Its combination of logic resources, block RAM, and high I/O count allows designers to implement parallel data acquisition, protocol bridging, image processing, control systems, and communications infrastructure on one device. The device provides 16,825 logic array blocks and 500 general-purpose I/O pins. Its 13,455,360 bits of RAM support buffering, packet storage, lookup functions, and other data-intensive operations. The -1 ordering option denotes the device performance class, while the I suffix identifies the industrial-temperature version. The specified operating range extends from -40°C to 100°C junction temperature, supporting industrial equipment where consumer-temperature components would be unsuitable. The XC7A200T-1FF1156I is implemented in a 1156-ball FCBGA package. This fine-pitch, high-ball-count package supports dense board layouts and high interface counts, but it requires a multilayer PCB with controlled impedance, disciplined power distribution, careful escape routing, and advanced assembly capability. Its 35 mm by 35 mm body dimensions make thermal and routing planning central to successful implementation. Typical applications include industrial automation, communications infrastructure, medical imaging, high-speed data acquisition, video processing, and embedded control. For acquisition systems, parallel I/O can connect multiple converters or sensors simultaneously. For communications equipment, the logic and RAM resources can support packet buffering, protocol conversion, and real-time filtering. The large I/O count is particularly valuable where multiple buses or high-speed memory interfaces must coexist. Designers should assign power, ground, configuration, clock, and user I/O pins from the official package pinout files before schematic capture. Decoupling must be placed close to the relevant supply pins, while high-speed routing requires continuous reference planes and length matching. Because the package has 1156 balls, a single routing error or assembly defect can prevent successful operation. This page combines device specifications, packaging guidance, design considerations, compatible Artix-7 ordering options, and parameter comparisons to support early architecture and sourcing decisions. It is intended to complement the manufacturer datasheet, UG475 package information, and AMD pinout files rather than replace those authoritative design documents.

RFQ رابطہ
XC7A200T-1SB484I - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-1SB484I

XC7A200T-1SB484I - 215K Logic Cell Artix-7 FPGA | AMD

The AMD XC7A200T-1SB484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 13,455,360 RAM bits, 16,825 configurable logic blocks, and 285 I/Os in a 484-ball FCBGA package. It is manufactured on a 28 nm process and operates from a 1 V core supply. The -1 speed grade, SB484 package designation, and industrial-temperature suffix organize the device for design, sourcing, and qualification workflows. An FPGA is a programmable semiconductor in the broader semiconductor and digital-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines programmable logic, block RAM, digital signal processing resources, and programmable I/O in one device. Artix-7 devices balance logic density, embedded memory, signal-processing capability, and low-cost packaging for designs requiring reconfigurable hardware or substantial parallel processing. The XC7A200T provides 215,360 logic cells and 13,455,360 RAM bits, giving designers substantial capacity for control logic, protocol bridges, data acquisition, embedded vision, and digital signal processing. The device also includes 740 DSP slices according to the Artix-7 family specification summary. Its 285 I/Os provide substantial connectivity for parallel sensors, converters, memories, and communications interfaces. The XC7A200T belongs to the Artix-7 product family, whose programmable architecture combines logic cells, block RAM, DSP slices, dedicated clocking resources, and programmable input/output. The 28 nm fabrication process supports a compact and power-efficient implementation for industrial, communications, instrumentation, and embedded-control systems. Configuration storage and the programming interface allow the same board design to support multiple hardware functions when field updates are required. Typical uses include industrial data-acquisition systems, sensor and signal-processing platforms, communications infrastructure, embedded control, high-speed interface bridges, and machine-vision preprocessing. A 484-ball FCBGA also supports dense, high-speed PCB layouts with short escape paths, but it requires careful via-in-pad, solder-mask, and thermal-management practices. The package outline is 19 mm by 19 mm according to the product listing. When planning a board, verify the SB484 ball map, differential-pair assignments, supply sequencing, and exposed thermal requirements against the AMD Artix-7 package documentation. The high pin count increases routing density, so ball-grid-array escape routing and power-plane integrity can be more consequential than they would be in a smaller package. Use the manufacturer’s pinout files and board-design guidance rather than inferring ball assignments from another Artix-7 package. This page combines device specifications, package-aware alternatives, direct comparison parameters, and practical implementation guidance. It is designed to help engineers identify the correct Artix-7 density, speed grade, and package before committing to a high-pin-count PCB layout.

RFQ رابطہ
XC7A200T-1SBG484C - 215K Artix-7 FPGA IC | AMD
XC7A200T-1SBG484C

XC7A200T-1SBG484C - 215K Artix-7 FPGA IC | AMD

The AMD XC7A200T-1SBG484C is an Artix-7 field-programmable gate array (FPGA) with 215,360 logic cells, 33,650 configurable blocks, and 13,140 Kbit of block RAM in a 484-ball FCBGA package. It operates from a 950 mV to 1.05 V core supply and provides 285 general-purpose I/O positions, making it the largest device in the Artix-7 family. The -1 speed grade is intended for performance-oriented designs requiring faster timing than the standard Artix-7 grade. An FPGA is a programmable semiconductor in the broader logic-device and digital-semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines programmable logic blocks, block RAM, digital signal processing resources, programmable I/O, and configuration memory into one device. The resulting hardware can implement parallel data paths, control systems, signal processing, and programmable interface logic without changing the physical IC. The XC7A200T-1SBG484C provides 13,140 Kbit of block RAM and 740 DSP slices, as identified in the Artix-7 family data. These resources support buffer management, video processing, control logic, high-throughput data acquisition, and embedded signal-processing pipelines. Its 28 nm Artix-7 implementation is optimized for performance per watt and low system cost, making the device suitable for industrial, communications, instrumentation, and embedded-control systems where greater programmable capacity is needed than smaller Artix-7 devices offer. A principal advantage of this FPGA is the density available from one 484-ball package. The 285 general-purpose I/O positions allow numerous external interfaces to coexist, while the large logic and RAM inventories support multi-channel designs. The device family also supports high-speed serial transceivers in suitable package configurations. Because the exact exposed transceiver count and I/O standards can depend on package and bank assignments, the device pinout files should be checked against the selected board-level connections. Typical applications include industrial machine vision, test and measurement equipment, communications infrastructure, embedded video processing, robotics, and high-performance control systems. In these systems, the XC7A200T-1SBG484C can consolidate control logic, data acquisition, buffering, and interface conversion in a single programmable device while reducing the number of discrete components compared with a multi-chip implementation. PCB design must specifically account for the FCBGA-484 footprint, multilayer construction, high-speed routing, dense power distribution, and thermal management. Place the decoupling network close to the device, route configuration and high-speed interfaces according to the AMD design guidance, and keep sensitive signals away from noisy power paths. This page also organizes package and family information, replacement constraints, application guidance, and engineering-focused comparisons for faster component selection.

RFQ رابطہ
XC7A200T-1SBG484I - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-1SBG484I

XC7A200T-1SBG484I - 215K Logic Cell Artix-7 FPGA | AMD

The AMD XC7A200T-1SBG484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 285 I/O, and a 484-terminal lidless FCBGA package measuring 19 mm x 19 mm. Built on 28 nm FPGA technology, this device combines programmable logic resources with approximately 13,140 Kb of block RAM and supports clock frequencies up to 1,098 MHz. A field-programmable gate array is a reconfigurable digital semiconductor that combines an array of programmable logic blocks, programmable I/O, embedded memory, dedicated processing resources, and clock-management circuitry. Within the FPGA hierarchy, the XC7A200T belongs to the Artix-7 family and is positioned for designs that require substantial parallel processing in a relatively compact, power-conscious device. The XC7A200T-1SBG484I provides 215,360 programmable logic cells and 285 user I/O in its SBG484 package. Its 28 nm process technology supports high performance and low power consumption, while the -1 speed grade targets demanding timing applications. The device operates from a 0.95 V to 1.05 V core supply, according to the manufacturer datasheet listing, and can be paired with external memory and interface circuitry for higher-bandwidth designs. Artix-7 devices integrate programmable logic with block RAM, DSP slices, dedicated clock pins, and high-performance I/O resources. The 215,360-cell device is useful when a fixed application-specific integrated circuit would require expensive redesigns. Because configuration data determines the implemented circuit, one hardware platform can support multiple firmware revisions, protocol variants, or field-upgradeable functions after manufacturing. Typical uses for this FPGA include industrial control, robotics, high-speed data acquisition, embedded vision, communications infrastructure, test equipment, and low-latency signal processing. The large logic capacity is especially useful for parallel sensor aggregation, hardware protocol bridges, packet processing, and control systems that combine deterministic hardware timing with programmable decision logic. The 19 mm x 19 mm lidless FCBGA requires careful PCB layout, controlled power delivery, and thermal management. Designers should follow the AMD package pinout files and UG475 when assigning balls, and should validate the selected memory interface, configuration method, voltage rails, and differential I/O requirements against the Artix-7 data sheet before layout release. This page combines family-level specifications, verified package details, drop-in speed-grade alternatives, and application-focused design guidance. It also organizes the most useful procurement and documentation entry points for engineers comparing the XC7A200T-1SBG484I with related Artix-7 devices.

RFQ رابطہ
XC7A200T-2FB484I - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-2FB484I

XC7A200T-2FB484I - 215K Logic Cell Artix-7 FPGA | AMD

The AMD XC7A200T-2FB484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 13,455,360 RAM bits, and 285 I/O positions, housed in a 484-ball FCBGA package. Built on a 28 nm process, the device combines programmable logic, block RAM, digital signal processing resources, and four GTP transceiver channels in a low-cost FPGA platform intended for compact, high-performance embedded systems. An FPGA is a semiconductor whose digital logic, interconnections, and input/output behavior are configured after manufacture. The Artix-7 family belongs to the broader FPGA hierarchy, which sits above fixed-function logic and programmable signal-processing devices. Compared with an ASIC, an FPGA permits design revisions, hardware reuse, and rapid prototyping without fabricating a custom integrated circuit. Its configurable parallel processing fabric is especially useful for image pipelines, control systems, communications, and data acquisition. The XC7A200T-2FB484I provides 13,455,360 RAM bits for buffers, packet storage, and general-purpose logic. Its 285 I/O positions support integration with external memory, control signals, serial transceivers, and industrial peripherals. Four GTP channels support high-speed serial links, while the -2 speed grade identifies a performance grade within the Artix-7 portfolio. The industrial-temperature suffix supports designs intended for extended-temperature operation. Artix-7 devices use a programmable fabric organized into configurable logic blocks and programmable interconnect resources. This architecture allows parallel datapaths to operate simultaneously, making the device suitable for video acquisition, sensor fusion, protocol bridging, and embedded control. Because FPGA designs depend on clocks, I/O standards, power rails, and tool-supported constraints, the device must be paired with an appropriate clocking scheme, power architecture, and device-aware PCB design. Typical applications include industrial machine vision, test and measurement equipment, embedded communications, radar or signal-processing front ends, and compact control systems. The 484-ball package supports dense connections but requires careful escape routing and multilayer PCB construction. Four GTP links are valuable for high-speed serial interfaces, while the large logic and RAM resources support parallel processing and substantial data buffering. A key design consideration is that the 484-ball FCBGA package requires a constrained, multilayer PCB with controlled power and ground distribution. Use the AMD package pinout files and the device-specific pin constraints when assigning banks, differential pairs, power pins, and transceiver connections. Confirm the selected clocking, memory interface, and I/O standards before finalizing the schematic and layout. This product record combines device resource details, package information, verified source links, comparison guidance, and practical PCB-design considerations to accelerate component selection and board planning.

RFQ رابطہ
XC7A200T-2FB676I - 215K Artix-7 FPGA | Advanced Micro Devices
XC7A200T-2FB676I

XC7A200T-2FB676I - 215K Artix-7 FPGA | Advanced Micro Devices

Advanced Micro Devices XC7A200T-2FB676I is an Artix-7 field-programmable gate array with 215,360 logic cells, 400 I/O, 33,650 adaptive logic modules, and a 676-ball FCBGA package. The device uses 28 nm FPGA technology, operates from a 1 V core supply, and is built around the 215K XC7A200T logic resource configuration for programmable control, signal processing, and interface designs. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable I/O, block RAM, DSP resources, and dedicated clocking circuitry. Within the device hierarchy, the XC7A200T belongs to the Artix-7 FPGA family, the Xilinx/AMD FPGA portfolio, and the broader category of programmable logic devices. Its large fabric allows parallel architectures that are difficult to implement with fixed-function processors or conventional discrete logic. The Artix-7 architecture provides 215,360 logic cells, 33,650 adaptive logic modules, 13.32 Mbit of block RAM, 740 DSP slices, and 400 user I/O according to the AMD Artix-7 family information. The -2 speed grade supports higher performance than the -1 grade, while the industrial I suffix identifies the intended temperature range. MMCM, PLL, and DSP resources support clock generation, timing, and arithmetic-heavy signal-processing pipelines. The XC7A200T-2FB676I combines programmable logic with integrated memory and DSP capacity. A design can use parallel lanes for image processing, protocol bridging, fixed-point arithmetic, or general-purpose data acquisition. Its 400 I/O provide substantial connectivity, while the FCBGA-676 package supports fine-pitch escape routing and requires careful power, ground, and differential-pair layout in multilayer PCBs. Typical uses include industrial control, test and measurement, communications infrastructure, embedded video processing, robotics, and high-throughput data conversion. The large fabric is particularly useful when an application requires deterministic parallel operation, flexible I/O, or hardware acceleration without replacing an FPGA with a larger processor-based system. The main design consideration is package complexity. The 676-ball FCBGA requires a dense escape-routing strategy, multiple power rails, carefully controlled decoupling, and assembly-process alignment. Use the AMD package pinout files and UG475 when assigning balls and planning the PCB stackup, and complete signal-integrity and power-integrity simulations before fabrication. This page combines the Artix-7 device specification with package-aware alternatives, application guidance, and design notes intended to accelerate schematic capture, PCB planning, and sourcing decisions for XC7A200T-2FB676I implementations.

RFQ رابطہ
XC7A200T-2FBG484C - Artix-7 FPGA 740K Logic Cells | AMD Xilinx
XC7A200T-2FBG484C

XC7A200T-2FBG484C - Artix-7 FPGA 740K Logic Cells | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG484C is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215K logic slices, and 13 Mb of block RAM in a 484-ball FBGA package. It operates with a core voltage of 1.0V and supports I/O standards from 1.2V to 3.3V, making it suitable for a wide range of applications. Data verified as of 2026-08-04. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. It consists of programmable logic blocks, configurable interconnects, and I/O blocks, allowing for flexible implementation of digital circuits. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the semiconductor industry. They are used in applications requiring parallel processing, high-speed I/O, and reconfigurable logic, such as communications, industrial automation, and aerospace. Key features of the XC7A200T-2FBG484C include 740K logic cells, 215K logic slices, 13 Mb of block RAM, 740 DSP slices, and 10.3 Mb of distributed RAM. It also features 16 GTX transceivers supporting up to 6.6 Gbps, 10 clock management tiles (CMTs), and 285 user I/O pins. The device supports multiple I/O standards including LVCMOS, LVDS, and HSTL, and includes hardened memory controllers for DDR3 and DDR4. The Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, offering a balance of performance, power, and cost. The device includes advanced clocking resources, such as PLLs and MMCMs, and supports partial reconfiguration for dynamic logic updates. The 484-ball FBGA package provides a compact footprint with excellent thermal and electrical characteristics, enabling high-density designs. Typical applications include software-defined radio (SDR), medical imaging, motor control, and high-performance computing. The high logic density and DSP slices make it ideal for signal processing, while the GTX transceivers support high-speed serial communication in networking and video applications. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a proper power-up sequence. Use the Xilinx Power Estimator (XPE) to calculate power consumption and design an appropriate thermal solution. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the AMD Xilinx datasheet, providing a comprehensive resource for engineers.

USD $320.00 رابطہ
XC7A200T-2FBG484I - Artix-7 FPGA 215K Logic Cells | AMD Xilinx
XC7A200T-2FBG484I

XC7A200T-2FBG484I - Artix-7 FPGA 215K Logic Cells | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG484I is a high-performance Artix-7 family FPGA featuring 215,360 logic cells, 16,825 CLBs, and 13,455,360 bits of Block RAM, packaged in a 484-ball FBGA (FBG484) with a -2 speed grade and industrial temperature range (-40°C to +100°C). It delivers 285 user I/O pins, making it ideal for high-bandwidth signal processing and connectivity applications. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that can be configured after manufacturing to implement custom digital circuits. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the application-specific integrated circuit (ASIC) family, but offer reconfigurability that ASICs lack. The Artix-7 family is positioned as a mid-range FPGA optimized for cost-sensitive, high-volume applications requiring high-speed transceivers and DSP capabilities. Key features include 740 DSP48E1 slices for high-throughput digital signal processing, 16 high-speed transceivers supporting up to 6.6 Gb/s, and 285 I/O pins with support for multiple I/O standards including LVCMOS, LVDS, and HSTL. The device also integrates a PCIe Gen2 block, 10/100/1000 Ethernet MACs, and an analog-to-digital converter (XADC) for system monitoring. The -2 speed grade provides balanced performance for logic and I/O, while the industrial temperature range ensures reliable operation in harsh environments. Architecturally, the XC7A200T is built on the 28nm high-k metal gate (HKMG) process, offering a 50% lower power footprint compared to previous generations. The configurable logic blocks (CLBs) contain 6-input look-up tables (LUTs) and dual flip-flops, enabling efficient implementation of complex logic functions. The device supports partial reconfiguration, allowing dynamic updates to specific regions without disrupting the entire design. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The high transceiver count and DSP resources make it particularly suited for communications infrastructure, such as LTE/5G base stations and network switches, where high-speed serial links and parallel processing are essential. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple voltage rails (VCCINT, VCCAUX, VCCO) with proper sequencing, and the FBG484 package has a thermal resistance of 8.4°C/W (theta_JA) that necessitates adequate airflow or heatsinking for high-utilization designs.

USD $89.15 رابطہ
XC7A200T-2FBG676C - 740K Logic Cells FPGA | AMD Xilinx
XC7A200T-2FBG676C

XC7A200T-2FBG676C - 740K Logic Cells FPGA | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG676C is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215K logic slices, and 13 Mb of block RAM in a 676-ball FCBGA (FBG676) package. It operates with a core voltage of 1.0V and supports I/O standards including LVCMOS, LVDS, and HSTL across 400 user I/O pins. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks and programmable interconnects that can be configured after manufacturing to implement any digital logic function. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which are a subset of integrated circuits (ICs). Unlike fixed-function ASICs, FPGAs offer reconfigurability, making them ideal for prototyping, rapid iteration, and applications requiring in-field updates. The Artix-7 family is optimized for cost-sensitive, high-volume applications requiring high logic density and low power. Key features include 740K logic cells, 215K logic slices, 13 Mb of block RAM, 740 DSP slices, and 16 high-speed transceivers supporting up to 6.6 Gbps. The device also integrates a 12-bit 1 MSPS ADC (XADC) for on-chip temperature and voltage monitoring. The FBG676 package provides 400 user I/O pins with support for multiple I/O standards, enabling flexible board design. The XC7A200T-2FBG676C is built on the 28nm high-k metal gate (HKMG) process technology, balancing performance and power efficiency. The -2 speed grade offers a balance of performance and cost, with internal clock speeds up to 628 MHz. The device supports partial reconfiguration, allowing dynamic updates to specific logic regions without disrupting the entire design. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The high logic density and DSP slices make it suitable for digital signal processing (DSP) tasks such as FFTs and filters, while the transceivers enable high-speed serial communication in networking equipment. When designing with this FPGA, ensure adequate decoupling capacitors on all power rails (VCCINT, VCCAUX, VCCO) and follow the recommended power-up sequence. The configuration interface (JTAG, SPI, or BPI) must be carefully planned to support the required boot mode and update strategy.

USD $550.00 رابطہ
XC7A200T-2FBG676I - 740K Logic Cells FPGA | AMD Xilinx
XC7A200T-2FBG676I

XC7A200T-2FBG676I - 740K Logic Cells FPGA | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG676I is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215,360 logic slices, and 13,140 Kb of Block RAM in a 676-ball FCBGA (FBG676) package. It operates with a core voltage of 1.0V and supports I/O standards including LVCMOS, LVDS, and HSTL, with up to 400 user I/O pins. The device is designed for high-bandwidth, low-power applications requiring substantial programmable logic and DSP resources. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that can be programmed after manufacturing to implement arbitrary digital logic functions. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the larger family of integrated circuits (ICs). Unlike fixed-function ASICs, FPGAs offer reconfigurability, making them ideal for prototyping, rapid iteration, and applications where requirements may evolve. The Artix-7 family is positioned as a mid-range FPGA balancing logic density, DSP capability, and power efficiency, bridging the gap between low-cost Spartan-7 and high-performance Kintex-7 devices. Key features of the XC7A200T-2FBG676I include 740 DSP48E1 slices for high-speed digital signal processing, 10.5 Mb of distributed RAM, and support for PCIe Gen2 x4 and 16 high-speed transceivers running at up to 6.6 Gb/s. The device also integrates a 12-bit 1 MSPS XADC for analog monitoring, and supports partial reconfiguration for dynamic logic updates. With a speed grade of -2, it offers balanced performance for a wide range of applications. Architecturally, the XC7A200T is built on a 28nm high-k metal gate (HKMG) process, providing a 50% power reduction compared to previous generations. The device features a flexible clocking architecture with 10 CMTs (Clock Management Tiles) and 32 global clock buffers, enabling complex multi-clock domain designs. The FBG676 package provides 676 balls with a 27mm x 27mm body, offering excellent thermal and electrical characteristics for high-density designs. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The device's high logic density and DSP resources make it suitable for implementing complex algorithms such as FFTs, filters, and image processing pipelines. Its transceiver capability supports high-speed serial protocols like PCIe, Gigabit Ethernet, and CPRI. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) with proper sequencing, and a heatsink or active cooling is recommended for high-utilization designs. Use AMD's Vivado Design Suite for configuration and implementation, and refer to the Artix-7 FPGA Data Sheet (DS181) for detailed specifications.

USD $100.00 رابطہ
XC7A200T-2FF1156I - 500 I/O Artix-7 FPGA | AMD
XC7A200T-2FF1156I

XC7A200T-2FF1156I - 500 I/O Artix-7 FPGA | AMD

The AMD XC7A200T-2FF1156I is an Artix-7 field-programmable gate array built on 28 nm technology, with 215,360 logic cells, 500 I/O, 16,825 configurable logic blocks, 740 DSP slices, and 13 Mb of block RAM in a 1156-ball FCBGA package. It operates from a 1 V core supply and targets designs requiring substantial parallel processing, high-speed serial links, programmable logic, and dedicated DSP resources. An FPGA is a user-programmable semiconductor containing configurable logic blocks, programmable I/O, memory, dedicated DSP slices, and clock-management resources. Within the semiconductor hierarchy, an FPGA sits above a programmable logic device and supports hardware-level parallelism rather than executing instructions sequentially. The XC7A200T belongs to the Artix-7 family, which combines mid-range programmable logic density with low-power operation for industrial control, communications, instrumentation, embedded vision, and test equipment. The Artix-7 device provides 215,360 logic cells organized into 16,825 CLBs, together with 13 Mb of block RAM and 740 DSP48 resources. Its 500 user I/O support high pin-count interfaces, while integrated transceivers and advanced clocking resources enable high-speed serial connectivity. The -2 speed designation and industrial-temperature suffix identify this configuration for designs requiring the specified performance grade across industrial operating conditions. The 1156-BBGA, FCBGA package is intended for multilayer PCB construction and high-density interconnect. Because the package exposes more than 1,100 contacts, power delivery, via-in-pad construction, ball-map verification, and thermal design are central to successful implementation. AMD package-device pinout files should be used when assigning every power, ground, configuration, clock, and user-I/O connection. Typical Artix-7 applications include industrial Ethernet and programmable control, high-speed data acquisition, digital signal processing, test and measurement, communications infrastructure, embedded vision, and sensor-fusion systems. These systems benefit from parallel pipelines, dedicated DSP resources, and deterministic hardware timing without the power envelope of a larger programmable-logic family. When migrating an existing board, verify the exact package drawing, ball map, power rails, configuration interface, and design-tools support before treating another Artix-7 ordering code as interchangeable. A device with a similar cell count is not automatically a drop-in replacement when its package designation, speed grade, temperature rating, or pin map differs. This page consolidates device specifications, ordering-code differences, package considerations, application guidance, and design notes for engineers evaluating the XC7A200T-2FF1156I as the central programmable-logic device in an industrial or communications design.

RFQ رابطہ
XC7A200T-2FFG1156I - Artix-7 FPGA 215K Logic Cells | AMD
XC7A200T-2FFG1156I

XC7A200T-2FFG1156I - Artix-7 FPGA 215K Logic Cells | AMD

The AMD XC7A200T-2FFG1156I is a member of the Artix-7 FPGA family, offering a balance of high performance, low power, and cost efficiency for a wide range of applications. It features 215,360 logic cells, 500 user I/Os, and 13,455,360 block RAM bits, all in a 1156-ball FCBGA package. Operating from a 0.95V to 1.05V core voltage, this device is designed for systems requiring substantial programmable logic and I/O capability. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementations. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the semiconductor industry. They offer flexibility and parallel processing capabilities that are often superior to microprocessors for specific tasks, making them essential in prototyping, signal processing, and hardware acceleration. Key features of the XC7A200T-2FFG1156I include 740 DSP slices for high-speed digital signal processing, 10 clock management tiles (CMTs) with MMCM and PLL for robust clock generation, and support for MicroBlaze soft-core processors. The device also integrates analog-to-digital converters (XADC) for on-chip temperature and voltage monitoring. With a maximum operating frequency of 628 MHz, it delivers high performance for demanding logic designs. Built on 28nm technology, the Artix-7 family provides the highest performance-per-watt fabric in its class. The device supports various I/O standards, including LVCMOS, LVDS, and HSTL, and features high-speed transceivers for serial communication. The 1156-ball FCBGA package offers excellent thermal and electrical characteristics, enabling reliable operation in industrial temperature ranges (-40°C to +100°C). Typical applications include software-defined radio, motor control, medical imaging, and aerospace systems. The combination of logic density, DSP capability, and I/O flexibility makes it suitable for both prototyping and production deployments. Designers can leverage AMD's Vivado Design Suite for comprehensive development support. When designing with this FPGA, careful attention to power supply decoupling and thermal management is essential. The device requires multiple supply rails, and proper sequencing is critical to ensure reliable operation. Additionally, utilizing the on-chip XADC for monitoring can enhance system reliability.

RFQ رابطہ
XC7A200T-2FGG484I - Artix-7 FPGA 215K Logic Cells | AMD
XC7A200T-2FGG484I

XC7A200T-2FGG484I - Artix-7 FPGA 215K Logic Cells | AMD

The AMD XC7A200T-2FGG484I is a high-performance Artix-7 Field Programmable Gate Array (FPGA) from the cost-optimized 28nm family, delivering the highest performance-per-watt fabric in its class. It features 215,360 logic cells, 16825 CLBs, and 13,455,360 bits of block RAM, packaged in a 484-ball Fine-Pitch Ball Grid Array (FBGA) with an industrial temperature range of -40°C to +100°C. This device operates from a nominal 1.0V core supply (0.95V to 1.05V) and supports up to 285 user I/O pins. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementation. FPGAs sit within the broader hierarchy of programmable logic devices, which are part of the semiconductor industry. Unlike fixed-function ASICs, FPGAs offer reconfigurability, making them ideal for prototyping, low-to-mid volume production, and applications requiring field updates. The Artix-7 family specifically targets cost-sensitive, high-volume applications where performance-per-watt and low power are critical. Key features of the XC7A200T-2FGG484I include 740 DSP slices for high-speed digital signal processing, 10 clock management tiles (CMTs) with MMCM and PLL, and support for various configuration interfaces including JTAG, SPI, and BPI. The -2 speed grade offers a balanced performance point, with the -3 being the highest performance and -1/-1LI/-2L optimized for lower static power. The device also integrates analog mixed-signal (AMS) blocks with a 12-bit 1MSPS ADC for on-chip monitoring. Technically, the Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, providing a significant leap in logic density and power efficiency over previous generations. The fabric includes 6-input look-up tables (LUTs), dedicated carry chains, and shift register logic, enabling efficient implementation of complex datapaths. The block RAM can be configured in various aspect ratios, and the DSP48E1 slices support 25x18 multiplication with 48-bit accumulation, ideal for filter and FFT implementations. Typical applications include software-defined radio, motor control, medical imaging, and industrial networking. The high I/O count and DSP resources make it suitable for video processing, high-speed data acquisition, and aerospace/defense systems requiring reconfigurable logic. The industrial temperature grade ensures reliable operation in harsh environments. When designing with this device, careful attention must be paid to power supply decoupling, with multiple 1.0V core and 1.8V auxiliary rails requiring proper filtering. Configuration bitstream storage in external SPI flash is recommended for production, and the device supports partial reconfiguration for dynamic logic updates.

RFQ رابطہ
XC7A200T-2SB484I - 215K Artix-7 FPGA | AMD | Industrial
XC7A200T-2SB484I

XC7A200T-2SB484I - 215K Artix-7 FPGA | AMD | Industrial

The AMD XC7A200T-2SB484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 285 I/Os, and 13,455,360 RAM bits in a 484-ball FCBGA package. It combines programmable logic, fixed-point DSP resources, block RAM, high-speed serial transceivers, and general-purpose I/O in a single device. The -2 speed grade targets mid-range performance, while the industrial I temperature designation supports extended-temperature operation. An FPGA is a semiconductor whose digital logic, interconnects, memory, and I/O behavior are configured after manufacture. The Artix-7 family occupies the hierarchy between lower-capacity programmable-logic devices and larger Zynq-class adaptive SoCs. It is intended for designs requiring substantially more parallel processing and storage than a microcontroller while avoiding the cost and complexity of a larger FPGA platform. Configuration logic determines how the internal resources implement a completed digital design. The XC7A200T provides 215,360 logic cells and 13,455,360 RAM bits, making it suitable for parallel image processing, industrial control, communications, instrumentation, and embedded signal-processing systems. The device exposes 285 general-purpose I/O and includes four high-speed serial transceiver channels in the associated 484-ball family information. Its 28 nm process technology supports a balance of performance, capacity, and power efficiency. Exact clock, transceiver, and I/O performance limits must be selected from the appropriate speed-grade and temperature tables in the manufacturer datasheet. The SB484 package is a 19 x 19 mm, 0.80 mm-pitch FBGA with 484 bottom-side terminals. Package construction, power delivery, and exposed thermal behavior are critical in an FPGA design because dynamic power depends on configuration, clock activity, I/O toggling, and resource utilization. Decoupling, controlled rise time, and heat removal should be planned with the same care as high-speed signal routing. The -2 speed grade should not be assumed to satisfy -1, -2L, or -3 timing requirements in an existing design. Typical applications include industrial machine vision, high-speed data acquisition, serial-interface aggregation, programmable logic controllers, test equipment, and embedded control systems. A 215K-cell device can consolidate parallel pipelines and interface logic that would otherwise require several discrete devices. Its block RAM supports packet buffering and data-plane storage, while DSP slices accelerate fixed-point filtering, correlation, and waveform-processing tasks. The available serial transceivers can reduce the need for external line drivers in suitable links. The primary design tradeoff is package migration. XC7A200T ordering codes containing a different package suffix can represent the same base FPGA but not necessarily the same footprint, height, ball map, or power architecture. For a drop-in decision, compare the exact package drawing, pinout file, voltage rails, decoupling requirements, configuration interface, and thermal design rather than relying only on the 484-ball ball count. This product record combines the verified manufacturer-family characteristics, package information, searchable ordering-code references, and design-oriented selection guidance. It also distinguishes true same-footprint options from superficially similar Artix-7 devices, helping engineers evaluate capacity, speed grade, temperature grade, package construction, and board-level compatibility before committing to a replacement or second-source strategy.

RFQ رابطہ
XC7A200T-2SBG484C - 215K Cell Artix-7 FPGA | AMD
XC7A200T-2SBG484C

XC7A200T-2SBG484C - 215K Cell Artix-7 FPGA | AMD

The AMD XC7A200T-2SBG484C is an Artix-7 field-programmable gate array with 215,360 logic cells, 16,825 logic blocks, 13,455,360 RAM bits, and 285 I/O sites in a 484-pin FCBGA package. It uses 28 nm process technology and belongs to the -2 speed grade. The SBG484 package supports dense programmable-logic, digital signal processing, embedded-processing, and high-speed I/O designs where the 484-ball footprint provides substantial routing and interface capacity. An FPGA is a semiconductor whose internal logic, interconnect, and I/O are configured after manufacture. A field-programmable gate array belongs to the programmable-logic hierarchy, combining configurable logic blocks, block RAM, programmable input/output resources, dedicated processing elements, and clocking resources on one device. The XC7A200T family therefore implements complete digital systems in a single integrated circuit rather than relying on a fixed sequence of processor instructions. The Artix-7 architecture provides 215,360 programmable logic cells, 16,825 logic blocks, and 13,455,360 RAM bits. These resources support parallel data paths, digital filters, protocol bridges, control logic, and embedded systems. The device also provides 285 I/O sites and dedicated high-performance I/O resources, allowing a board design to combine multiple interfaces without relying on a large collection of external devices. The XC7A200T-2SBG484C is manufactured on 28 nm technology and is identified with a 1 V core-voltage configuration in the published device listing. Its -2 designation identifies the performance grade. Compared with lower-speed Artix-7 options, the -2 grade favors designs that require greater logic timing margin, although board-level signal integrity, power delivery, and tool constraints still determine whether a design closes timing successfully. Typical uses include industrial control and automation, embedded vision, communications infrastructure, test equipment, consumer peripherals, and high-throughput digital signal processing. The 215,360-cell fabric is particularly suitable for parallel acquisition systems, protocol conversion, image pre-processing, control-plane logic, and designs that combine MicroBlaze processor logic with dedicated hardware pipelines. The most important design consideration is package and power planning. The 484-ball FCBGA requires a dense multilayer PCB, careful power-plane segmentation, and constrained escape routing from the device. Configure the power rails, decoupling network, clocking scheme, and I/O standards for the selected board environment, then validate timing and signal integrity with the complete Vivado design flow. This page combines the exact device identity, package and logic-resource data, drop-in ordering-code comparisons, and practical PCB guidance. It is intended to help engineers confirm that XC7A200T-2SBG484C matches the intended Artix-7 design before investing in board layout, tooling, or procurement.

RFQ رابطہ
XC7A200T-2SBG484I - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-2SBG484I

XC7A200T-2SBG484I - 215K Logic Cell Artix-7 FPGA | AMD

The AMD/Xilinx XC7A200T-2SBG484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 13,455,360 RAM bits, and 285 I/O in a 484-FBGA package. The -2 speed grade provides a performance-oriented configuration for designs requiring substantial programmable logic, embedded block RAM, and parallel digital I/O in one highly integrated device. An FPGA is a semiconductor whose digital logic is configured after manufacture. Within the broader hierarchy, the XC7A200T-2SBG484I is a field-programmable gate array, an FPGA, and a programmable-logic semiconductor. Its configurable architecture supports parallel processing, control, interface, data acquisition, and embedded-memory functions without relying on a fixed application-specific instruction set. The Artix-7 family targets compact, cost-sensitive systems that require more capability than small programmable logic devices. The device provides 215,360 logic cells and 13,455,360 RAM bits, creating approximately 1.34 MB of block RAM for buffering, packet storage, video line buffers, or general-purpose on-chip data retention. Its 285 I/O positions support interfaces to external memory, converters, transceivers, displays, sensors, and digital peripherals. The 484-FBGA package also supports high-density board integration while exposing the device through a large ball-grid array rather than perimeter leads. The XC7A200T designation identifies the 200K-class Artix-7 device, while the SBG484 suffix identifies the 484-ball package configuration. The -2 speed designation selects the second performance grade. The industrial I suffix identifies an industrial-temperature-grade ordering option. Exact AC timing limits, configuration-memory organization, differential I/O standards, and power characteristics should be checked against the applicable Artix-7 data sheet and package-specific pinout before a board is released. Typical uses include industrial control and automation, video and image processing, sensor aggregation, communications infrastructure, test-and-measurement equipment, and embedded control systems. The combination of 215,360 logic cells, approximately 1.34 MB of block RAM, and 285 I/O makes the device suitable for designs that need several parallel pipelines operating concurrently or substantial local buffering between external interfaces. Board design requires careful treatment of the 484-ball footprint, power rails, configuration pins, decoupling, and high-speed routing. Use the official package pinout file when assigning every ball, and keep sensitive configuration and clock routing away from noisy switching nodes. Confirm the selected package variant, device speed grade, and industrial-temperature designation against the system’s environmental requirements before releasing the BOM. This product page combines the exact device identity, package information, logic and memory capacity, sourcing context, drop-in comparison options, and practical implementation guidance. It is intended to help engineers confirm fit at the datasheet level while avoiding unsupported claims about timing, compliance, or pin-level connectivity.

RFQ رابطہ