مائیکرو کنٹرولرز

مصنوعات (19,000+)

STM32F765IIK6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765IIK6

STM32F765IIK6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

The STMicroelectronics STM32F765IIK6 is a 32-bit Arm Cortex-M7 microcontroller with a 216 MHz CPU, 2 MB of flash memory, and a 176+25 UFBGA package measuring 10 mm by 10 mm. It is designed for high-performance embedded control, DSP, graphics, networking, and connected industrial applications. The Cortex-M7 core includes an FPU, DSP instructions, an L1 cache, an MPU, and the ART Accelerator for efficient embedded execution. An Arm Cortex-M7 microcontroller is a 32-bit embedded processor based on the Arm Cortex-M architecture. It combines real-time interrupt-driven control with higher-performance DSP and floating-point capabilities than typical entry-level microcontrollers. In the STM32 product hierarchy, the STM32F765 belongs to the STM32F7 family of high-performance microcontrollers, combining general-purpose control, memory acceleration, and extensive peripheral integration. The verified product information identifies a maximum CPU frequency of 216 MHz, 2 MB of flash, a 176+25 UFBGA package, and a 10 mm by 10 mm package size. The manufacturer’s STM32F765 product family datasheet also identifies up to 2 MB flash, 462 DMIPS, SDRAM, DFSDM, and advanced signal-processing and connectivity features. These characteristics make the STM32F765IIK6 suitable for applications requiring more computation and memory than a basic Cortex-M microcontroller. The Cortex-M7 architecture is designed to improve instruction throughput through its pipeline, cache mechanisms, DSP support, and ART Accelerator. The FPU supports floating-point workloads, while DSP instructions accelerate common filtering and signal-processing operations. An MPU can provide memory-protection capabilities for systems that require isolation between critical tasks or software components. These features are especially valuable in control systems, audio equipment, industrial controllers, and embedded human-machine interfaces. Typical applications include industrial automation, motor and motion control, audio and DSP systems, communications equipment, test and measurement instruments, and connected embedded products. The STM32F765IIK6 is also identified by a distributor source as a supported flight-controller MCU target in the STM32F7X5 family. For flight-control designs, careful validation of motor control, sensor timing, power supplies, and firmware remains essential. The 176+25 UFBGA package is a fine-pitch, high-density package that requires careful PCB layout, controlled escape routing, adequate power delivery, and reliable assembly capability. The 10 mm by 10 mm outline and 0.65 mm pitch place demands on via planning, solder mask, thermal management, and inspection. The package is not a direct substitute for parts using a leaded package or a different ball count. This page consolidates verified distributor information, the manufacturer datasheet link, application context, comparison fields, and practical design considerations. Because the supplied web results do not expose a complete verified price table or a complete manufacturer pinout list, unavailable values are marked for validation rather than inferred. The STM32F765IIK6 should be selected when a design specifically requires the STM32F765 device identity, 216 MHz Cortex-M7 performance, 2 MB flash, and the 176+25 UFBGA footprint. Confirm package pin assignments, voltage rails, memory configuration, peripheral availability, lifecycle status, and assembly capability against the official STM32F765 family datasheet before releasing a production PCB.

RFQ رابطہ
STM32F765IIK7 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765IIK7

STM32F765IIK7 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

STMicroelectronics STM32F765IIK7 is a high-performance 32-bit Arm Cortex-M7 microcontroller with FPU, operating up to 216 MHz and delivering 462 DMIPS, with 2 MB of Flash in a 176+25-pin UFBGA 10 x 10 mm package. It combines embedded control capability with high-speed digital signal processing and extensive connectivity for demanding embedded systems. A microcontroller, or MCU, integrates a processor core, Flash memory, SRAM, peripherals, and interface controllers into one package. The STM32F765 belongs to the STM32F7 high-performance MCU family, combining an Arm Cortex-M7 CPU core with embedded Flash, RAM, real-time peripherals, and connectivity hardware. This places it above general-purpose Cortex-M devices in the hierarchy of MCU, embedded processor, and semiconductor. Verified headline features include a 32-bit Arm Cortex-M7 core with FPU, a maximum operating frequency of 216 MHz, 462 DMIPS computational performance, and 2 MB of Flash memory. The supplied distributor data identifies a 176+25 UFBGA package measuring 10 x 10 mm. Its performance is useful for control loops, real-time signal processing, communications gateways, and human-machine-interface systems where deterministic execution and external peripheral integration matter. The Cortex-M7 architecture is designed for efficient real-time execution and includes hardware floating-point support for DSP-oriented workloads. The STM32F765 device family also provides features associated with the STM32F7 platform, including multi-layer bus architecture, DMA, and high-speed peripherals. However, exact RAM capacity, voltage limits, peripheral variants, timing limits, and package pin assignments must be confirmed in the manufacturer datasheet before a new design is released. Typical uses include industrial automation, communications infrastructure, audio and signal-processing equipment, display controllers, and connected embedded products. Designers can pair the MCU with Ethernet PHY, USB interface, memory, and sensor components when their electrical and protocol requirements match. Firmware configuration, clock planning, peripheral pin multiplexing, and package-level escape routing remain central to successful implementation. For PCB design, provide a regulated supply, decoupling close to power pins, an exposed-pad-aware thermal strategy, and clean clock routing. SWD programming and recovery should remain accessible in production. Because detailed electrical limits and pin names are not fully available in the supplied verified data, they must be checked directly against the STMicroelectronics family datasheet. This page consolidates verified distributor specifications, package information, sourcing data, practical application guidance, and same-family replacement analysis. It is intended to accelerate engineering evaluation while clearly separating verified facts from parameters that still require manufacturer-datasheet confirmation.

RFQ رابطہ
STM32F765IIT6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765IIT6

STM32F765IIT6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

The STMicroelectronics STM32F765IIT6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 2 MB of Flash memory, in a 176-LQFP 24 mm × 24 mm package. It belongs to the STM32F7 microcontroller family and combines a 32-bit RISC processor core, embedded memory, and extensive peripheral connectivity in one integrated circuit. A microcontroller is a programmable system-on-chip that executes firmware, reads sensor and user inputs, controls outputs, and manages communications. The STM32F7 series sits within the hierarchy microcontroller → 32-bit microcontroller → Arm Cortex-M MCU → STM32F7 high-performance MCU. This device is suited to applications requiring substantially more processing capability than basic 8-bit or low-cost Cortex-M controllers while retaining the ecosystem and software model associated with Arm Cortex-M devices. The verified product information identifies an Arm Cortex-M7 core, a maximum operating frequency of 216 MHz, and 2 MB of Flash organized as 2M × 8. The STM32F765xx family is described by STMicroelectronics as a high-performance Cortex-M7 platform. These headline values support responsive control loops, connected embedded products, and signal-processing workloads where CPU throughput and program storage are important selection criteria. The STM32F765IIT6 is identified specifically as a 176-LQFP package measuring 24 mm × 24 mm. This large leaded package provides 176 external connection points and is suitable for prototypes, industrial controllers, and equipment where fine-pitch BGA assembly is undesirable. Exact pin functions, electrical limits, memory-map details, and peripheral configurations must be checked against the manufacturer datasheet before final PCB design. Typical uses include industrial automation, motor and motion control, communications equipment, instrumentation, human-interface systems, and connected embedded products. At 216 MHz, the device can process firmware concurrently with communications and control tasks, while its 2 MB Flash capacity provides room for larger application code. Because detailed peripheral and timing specifications were not included in the verified search data, they should not be inferred without reviewing the official datasheet. A practical design begins with the STMicroelectronics STM32F765xx datasheet, followed by the device reference manual, pin definitions, electrical characteristics, and package drawing. Confirm the exact suffix temperature range and ordering information, preserve all required power and decoupling connections, and validate the 176-pin land pattern against the official package drawing. Do not substitute another STM32F7 member solely because it uses Cortex-M7; Flash size, pinout, peripheral mix, and qualification must match. This page consolidates the verified manufacturer and distributor facts for STM32F765IIT6, including the 216 MHz Cortex-M7 core, 2 MB Flash, 176-LQFP package, source links, and design considerations. It is intended to accelerate engineering discovery, but the manufacturer datasheet remains the authoritative source for release timing, electrical limits, and production details.

RFQ رابطہ
STM32F765NGH6 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F765NGH6

STM32F765NGH6 - 216MHz Cortex-M7 MCU | STMicroelectronics

STMicroelectronics STM32F765NGH6 is a high-performance 32-bit Arm Cortex-M7 microcontroller with FPU and DSP capability, operating up to 216 MHz and containing 1 MB of flash memory in a 216-pin TFBGA package measuring 13 x 13 mm. It uses a 3.3 V supply and is supplied in tray packaging according to the verified distributor data. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. The STM32F7 family belongs to the Arm Cortex-M microcontroller hierarchy, combining real-time embedded control, low-power operation, and extensive digital and analog peripherals. The STM32F765NGH6 is positioned for applications requiring greater processing throughput, external memory connectivity, and high-speed communications than typical entry-level Cortex-M devices. The verified manufacturer data identifies an Arm Cortex-M7 32-bit RISC core, a maximum operating frequency of 216 MHz, and 1 MB of flash. The family documentation states a score of up to 462 DMIPS. Its 216-pin TFBGA package exposes substantially more I/O than smaller leaded packages, allowing simultaneous use of communications, control, analog, and memory interfaces. Operating voltage is listed as 3.3 V, while detailed RAM, peripheral, temperature, and timing limits require confirmation in the manufacturer datasheet. Typical application areas include industrial automation, networked embedded equipment, data acquisition, human-machine interfaces, motor and motion control, and connected control systems. Its 216 MHz Cortex-M7 performance supports real-time signal processing and higher-level control tasks, while the large package provides extensive pin availability. Designers should confirm peripheral assignments, power requirements, and board-level interface support against the exact STM32F765NGH6 datasheet before layout release. A critical design consideration is BGA assembly. The 13 x 13 mm TFBGA package requires a PCB with suitable escape routing, via-in-pad or via-under-ball construction where appropriate, appropriate copper thermal and power distribution, and a manufacturing process capable of inspecting the solder joints. A fine-pitch MCU also benefits from short, properly referenced clock and high-speed signal paths. This page consolidates verified manufacturer and distributor facts, exact package information, commercial availability data, and same-family replacement candidates. It also distinguishes verified specifications from parameters that still require datasheet confirmation, helping engineers make a more reliable sourcing and design decision without treating generic STM32 family data as part-specific evidence.

RFQ رابطہ
STM32F765NGH7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F765NGH7

STM32F765NGH7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

STMicroelectronics STM32F765NGH7 is a 32-bit Arm Cortex-M7 microcontroller with a 216 MHz maximum operating frequency, 1 MB of flash memory, and a 216-TFBGA 13 x 13 mm package. The device includes a double-precision floating-point unit, ART Accelerator, 16 KB instruction and data caches, an MPU, and DSP instructions, supporting up to 462 DMIPS according to the manufacturer datasheet. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, data memory, peripherals, and communication interfaces on one package. The STM32F7 family belongs to the broader Arm Cortex-M microcontroller category, with the Cortex-M7 core using a 32-bit RISC architecture. This places the STM32F765NGH7 within the semiconductor and embedded-control device hierarchy for industrial, communications, consumer, and real-time control systems. Key features include a 216 MHz maximum clock, 1 MB of flash organized as 1M x 8, up to 462 DMIPS, a 16 KB L1 instruction cache, a 16 KB L1 data cache, an MPU, and DSP instructions. The 3 V operating supply identified in the verified product data is suitable for embedded systems designed around conventional 3.3 V rails. Its high-performance architecture supports computationally intensive control, communications, and signal-processing workloads. The Cortex-M7 core combines a 32-bit Arm architecture with a double-precision FPU and ART Accelerator. According to the manufacturer datasheet, the 16 KB instruction and data caches allow zero-wait-state execution from embedded flash and external memory. The MPU supports memory-protection and isolation functions, while DSP instructions accelerate suitable arithmetic operations. These capabilities distinguish this device from simpler Cortex-M3 or Cortex-M4 microcontrollers. Typical applications include industrial automation equipment, networked embedded controllers, communications infrastructure, audio and digital signal processing, and real-time control systems. Its 216 MHz performance and floating-point capability are useful when control loops or signal-processing tasks must execute without relying on a separate processor. The principal design consideration is the 216-ball BGA footprint. A new PCB layout must provide the required escape routing, via structure, power distribution, and assembly process for a 13 x 13 mm TFBGA. Firmware and peripheral configurations should be validated against the manufacturer datasheet before production release. This page consolidates verified manufacturer information, distributor pricing and availability, engineering selection guidance, and explicitly qualified replacement analysis. It distinguishes confirmed drop-in candidates from unavailable alternatives so procurement and design decisions can be made without treating general-purpose MCU alternatives as pin-compatible replacements.

RFQ رابطہ
STM32F765NGH7TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)
STM32F765NGH7TR

STM32F765NGH7TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM32F765NGH7TR is a 32-bit Arm Cortex-M7 microcontroller with a 216 MHz maximum operating frequency, 1 MB of flash memory, and a 216-TFBGA 13 x 13 mm package. The device includes a double-precision floating-point unit, ART Accelerator, 16 KB instruction and data caches, an MPU, and DSP instructions, supporting up to 462 DMIPS according to the manufacturer datasheet. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, data memory, peripherals, and communication interfaces on one package. The STM32F7 family belongs to the broader Arm Cortex-M microcontroller category, with the Cortex-M7 core using a 32-bit RISC architecture. This places the STM32F765NGH7TR within the semiconductor and embedded-control device hierarchy for industrial, communications, consumer, and real-time control systems. Key features include a 216 MHz maximum clock, 1 MB of flash organized as 1M x 8, up to 462 DMIPS, a 16 KB L1 instruction cache, a 16 KB L1 data cache, an MPU, and DSP instructions. The 3 V operating supply identified in the verified product data is suitable for embedded systems designed around conventional 3.3 V rails. Its high-performance architecture supports computationally intensive control, communications, and signal-processing workloads. The Cortex-M7 core combines a 32-bit Arm architecture with a double-precision FPU and ART Accelerator. According to the manufacturer datasheet, the 16 KB instruction and data caches allow zero-wait-state execution from embedded flash and external memory. The MPU supports memory-protection and isolation functions, while DSP instructions accelerate suitable arithmetic operations. These capabilities distinguish this device from simpler Cortex-M3 or Cortex-M4 microcontrollers. Typical applications include industrial automation equipment, networked embedded controllers, communications infrastructure, audio and digital signal processing, and real-time control systems. Its 216 MHz performance and floating-point capability are useful when control loops or signal-processing tasks must execute without relying on a separate processor. The principal design consideration is the 216-ball BGA footprint. A new PCB layout must provide the required escape routing, via structure, power distribution, and assembly process for a 13 x 13 mm TFBGA. Firmware and peripheral configurations should be validated against the manufacturer datasheet before production release. This page consolidates verified manufacturer information, distributor pricing and availability, engineering selection guidance, and explicitly qualified replacement analysis. It distinguishes confirmed drop-in candidates from unavailable alternatives so procurement and design decisions can be made without treating general-purpose MCU alternatives as pin-compatible replacements.

RFQ رابطہ
STM32F765NIH6 - 216MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics
STM32F765NIH6

STM32F765NIH6 - 216MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics

The STMicroelectronics STM32F765NIH6 is a 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 2 MB of flash memory, in a 216-TFBGA package measuring 13 x 13 mm. It belongs to the STM32F7 performance-oriented microcontroller family and combines a high-frequency CPU with extensive embedded memory and integrated peripherals. A microcontroller is a compact semiconductor system that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals such as timers, communication interfaces, and interrupt controllers. The STM32F7 family hierarchy is Arm Cortex-M7 processor core, embedded microcontroller, STM32 microcontroller, and semiconductor. This device is intended for embedded control systems requiring substantially more processing capability than typical low-cost Cortex-M microcontrollers. Verified source data identifies a 32-bit architecture, up to 216 MHz operation, and 2 MB organized as 2M x 8 of flash. The family datasheet also states 462 DMIPS and up to 2 MB of flash. Its high-performance positioning makes it relevant for industrial controllers, connected equipment, audio systems, and real-time user interfaces. Exact RAM, peripheral, voltage, and package-pin details are retained as data-needed fields rather than inferred from other STM32 devices. The Arm Cortex-M7 core uses a 32-bit RISC architecture and includes floating-point capability in the applicable STM32F7 family documentation. Unlike an application processor, the STM32F765NIH6 is designed around deterministic embedded control, firmware-driven peripherals, and compact real-time operation. Its 216 MHz ceiling provides headroom for protocol processing, control loops, and concurrent peripheral activity, although final performance depends on memory configuration, peripherals, and firmware. Typical applications include industrial automation, factory equipment, industrial networking, audio and signal processing, human-interface systems, and connected embedded products. The 2 MB program memory supports substantially larger firmware than entry-level MCUs, while the 216 MHz core can manage control calculations and communication tasks. Engineers should still budget SRAM, validate clock-tree configuration, and confirm every peripheral and pin assignment against the manufacturer datasheet. For PCB implementation, the 216-TFBGA package demands careful escape routing, uninterrupted supply distribution, and thermal-aware placement. Banked ground connections, short high-speed routes, and verified decoupling should be designed according to the datasheet layout guidance. Because the supplied sources do not publish the complete 216-ball pinout, exact ball names and functions are not asserted here. This product record combines verified manufacturer and distributor specifications, sourcing links, and honest data-gap markers. It does not infer unavailable electrical limits, pricing, pin assignments, or cross-brand replacements; those fields require confirmation before schematic release or production procurement.

RFQ رابطہ
STM32F765NIH6TR - 216MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics (Tape & Reel)
STM32F765NIH6TR

STM32F765NIH6TR - 216MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F765NIH6TR is a 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 2 MB of flash memory, in a 216-TFBGA package measuring 13 x 13 mm. It belongs to the STM32F7 performance-oriented microcontroller family and combines a high-frequency CPU with extensive embedded memory and integrated peripherals. A microcontroller is a compact semiconductor system that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals such as timers, communication interfaces, and interrupt controllers. The STM32F7 family hierarchy is Arm Cortex-M7 processor core, embedded microcontroller, STM32 microcontroller, and semiconductor. This device is intended for embedded control systems requiring substantially more processing capability than typical low-cost Cortex-M microcontrollers. Verified source data identifies a 32-bit architecture, up to 216 MHz operation, and 2 MB organized as 2M x 8 of flash. The family datasheet also states 462 DMIPS and up to 2 MB of flash. Its high-performance positioning makes it relevant for industrial controllers, connected equipment, audio systems, and real-time user interfaces. Exact RAM, peripheral, voltage, and package-pin details are retained as data-needed fields rather than inferred from other STM32 devices. The Arm Cortex-M7 core uses a 32-bit RISC architecture and includes floating-point capability in the applicable STM32F7 family documentation. Unlike an application processor, the STM32F765NIH6TR is designed around deterministic embedded control, firmware-driven peripherals, and compact real-time operation. Its 216 MHz ceiling provides headroom for protocol processing, control loops, and concurrent peripheral activity, although final performance depends on memory configuration, peripherals, and firmware. Typical applications include industrial automation, factory equipment, industrial networking, audio and signal processing, human-interface systems, and connected embedded products. The 2 MB program memory supports substantially larger firmware than entry-level MCUs, while the 216 MHz core can manage control calculations and communication tasks. Engineers should still budget SRAM, validate clock-tree configuration, and confirm every peripheral and pin assignment against the manufacturer datasheet. For PCB implementation, the 216-TFBGA package demands careful escape routing, uninterrupted supply distribution, and thermal-aware placement. Banked ground connections, short high-speed routes, and verified decoupling should be designed according to the datasheet layout guidance. Because the supplied sources do not publish the complete 216-ball pinout, exact ball names and functions are not asserted here. This product record combines verified manufacturer and distributor specifications, sourcing links, and honest data-gap markers. It does not infer unavailable electrical limits, pricing, pin assignments, or cross-brand replacements; those fields require confirmation before schematic release or production procurement.

RFQ رابطہ
STM32F765NIH7 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765NIH7

STM32F765NIH7 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

STMicroelectronics STM32F765NIH7 is a high-performance 32-bit Arm Cortex-M7 microcontroller with a maximum operating frequency of 216 MHz, 2 MB of internal Flash memory, and a 216-pin TFBGA package measuring 13 x 13 mm. It is designed for embedded applications requiring substantial processing performance, DSP capability, and extensive peripheral integration in a relatively compact surface-mount package. The device belongs to the STM32F7 family of Cortex-M7 microcontrollers and is positioned between general-purpose embedded control and higher-performance control applications. A Cortex-M7 microcontroller is a 32-bit reduced-instruction-computing processor commonly used for real-time control, communications, audio, graphics, and industrial automation. In the product hierarchy, STM32F765NIH7 is a microcontroller, embedded processor, semiconductor, and programmable control device. The STM32F7 family combines a high-performance CPU core with dedicated Flash, SRAM, communication interfaces, timers, and analog peripherals within one integrated package. The verified product information identifies an Arm Cortex-M7 core operating at up to 216 MHz, 2 MB of Flash organized as 2M x 8 bits, and a 216-TFBGA package. The manufacturer describes the STM32F765xx family as a high-performance 32-bit MCU with FPU and DSP capability. The 216 MHz operating point is useful for computationally intensive control loops, digital signal processing, human-machine interfaces, and connected industrial equipment. The large 2 MB Flash capacity provides room for substantial application code, firmware updates, and embedded assets. The STM32F765NIH7 combines CPU performance with the integration expected from a mixed-signal embedded platform. Its Cortex-M7 architecture can accelerate code containing intensive arithmetic, filtering, and control operations, while integrated peripherals reduce the need for external interface devices. Because the supplied distributor and manufacturer excerpts do not enumerate the complete peripheral set, specific peripheral counts, SRAM capacity, operating-temperature limits, and maximum I/O specifications should be confirmed in the manufacturer datasheet before design release. Typical uses include industrial automation, motor and motion control, communications equipment, audio and digital signal processing, test and measurement instruments, and high-end human-machine interfaces. In these systems, the 216 MHz core provides processing headroom for concurrent control and communication tasks, while the 2 MB Flash budget accommodates larger embedded applications. The 13 x 13 mm TFBGA package can support dense designs but demands careful PCB layout and assembly planning because its ball pitch and thermal characteristics differ from leaded packages. Designers should prioritize the manufacturer's reference schematic, pin multiplexing guidance, decoupling requirements, clock configuration, and exposed-pad recommendations when laying out a new board. Because this exact 216-ball package is not represented in the available package-diagram library, no verified pin-level diagram is asserted here. Firmware, bootloader behavior, memory organization, and peripheral availability must also be checked against the exact STM32F765NIH7 ordering code and its applicable device datasheet. This page consolidates verified manufacturer and distributor information, distinguishes confirmed specifications from fields requiring datasheet review, and explains the engineering trade-offs associated with a high-speed Cortex-M7 MCU in a compact 216-pin TFBGA. It also provides practical sourcing guidance and a conservative drop-in assessment rather than presenting unverified substitutes as direct replacements.

RFQ رابطہ
STM32F765VGH6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F765VGH6

STM32F765VGH6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

STMicroelectronics STM32F765VGH6 is a high-performance 32-bit Arm Cortex-M7 microcontroller with a 216 MHz operating frequency, 1 MB of embedded Flash, and a 100-pin TFBGA package measuring 8 x 8 mm. It combines a double-precision FPU, DSP instructions, an ART Accelerator, and a 16 KB L1 cache for high-performance embedded control. The MCU also provides SDRAM and DFSDM support, making it suitable for signal processing, communications, audio, industrial control, and connected equipment. An Arm Cortex-M7 MCU is a 32-bit RISC processor within the embedded microcontroller and semiconductor hierarchy. Its floating-point and DSP capabilities accelerate mathematical and signal-processing workloads while retaining the deterministic control characteristics expected from a microcontroller. The STM32F765VGH6 specifically combines that processing performance with 1 MB of Flash for firmware and 3.3 V operation in a compact surface-mount package. Key features include operation up to 216 MHz, 462 DMIPS, a double-precision floating-point unit, dedicated DSP instructions, and 16 KB of combined instruction/data L1 cache. The ART Accelerator provides accelerated Flash access, while the memory-protection unit supports controlled memory access. Integrated SDRAM support adds flexibility for systems requiring external memory, and the DFSDM peripheral targets applications requiring efficient digital conversion and filtering. Technically, the STM32F765VGH6 is positioned for performance-oriented embedded systems where a Cortex-M7 core, substantial program memory, and a broad set of peripherals must coexist within one device. Its 100-lead TFBGA arrangement supports compact PCB layouts, but the fine-pitch land pattern requires careful escape routing, assembly-profile control, and inspection during production. The manufacturer datasheet remains the controlling reference for pin functions, electrical limits, and package details. Typical uses include industrial automation, communications equipment, audio and digital signal processing, motor and motion control, test equipment, and embedded user interfaces. The 216 MHz Cortex-M7 performance and DSP capability benefit workloads with real-time sampling or control loops, while 1 MB of Flash can accommodate substantial application code, drivers, protocol stacks, and a bootloader. Designers should verify the complete TFBGA-100 footprint, pin multiplexing, exposed-pad requirements, recommended decoupling, and operating limits against the STMicroelectronics datasheet before layout release. Firmware also requires the appropriate startup code, clock configuration, memory initialization, and peripheral pin assignments. Because the 100-pin package provides many parallel and high-speed functions, signal-integrity and manufacturing reviews should be completed before high-volume production. This product page consolidates verified manufacturer and distributor information, package and memory characteristics, commercially focused sourcing questions, same-family drop-in alternatives, and practical design guidance. It also distinguishes confirmed specifications from parameters that require confirmation in the full manufacturer datasheet.

RFQ رابطہ
STM32F765VGH6TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)
STM32F765VGH6TR

STM32F765VGH6TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM32F765VGH6TR is a high-performance 32-bit Arm Cortex-M7 microcontroller with a 216 MHz operating frequency, 1 MB of embedded Flash, and a 100-pin TFBGA package measuring 8 x 8 mm. It combines a double-precision FPU, DSP instructions, an ART Accelerator, and a 16 KB L1 cache for high-performance embedded control. The MCU also provides SDRAM and DFSDM support, making it suitable for signal processing, communications, audio, industrial control, and connected equipment. An Arm Cortex-M7 MCU is a 32-bit RISC processor within the embedded microcontroller and semiconductor hierarchy. Its floating-point and DSP capabilities accelerate mathematical and signal-processing workloads while retaining the deterministic control characteristics expected from a microcontroller. The STM32F765VGH6TR specifically combines that processing performance with 1 MB of Flash for firmware and 3.3 V operation in a compact surface-mount package. Key features include operation up to 216 MHz, 462 DMIPS, a double-precision floating-point unit, dedicated DSP instructions, and 16 KB of combined instruction/data L1 cache. The ART Accelerator provides accelerated Flash access, while the memory-protection unit supports controlled memory access. Integrated SDRAM support adds flexibility for systems requiring external memory, and the DFSDM peripheral targets applications requiring efficient digital conversion and filtering. Technically, the STM32F765VGH6TR is positioned for performance-oriented embedded systems where a Cortex-M7 core, substantial program memory, and a broad set of peripherals must coexist within one device. Its 100-lead TFBGA arrangement supports compact PCB layouts, but the fine-pitch land pattern requires careful escape routing, assembly-profile control, and inspection during production. The manufacturer datasheet remains the controlling reference for pin functions, electrical limits, and package details. Typical uses include industrial automation, communications equipment, audio and digital signal processing, motor and motion control, test equipment, and embedded user interfaces. The 216 MHz Cortex-M7 performance and DSP capability benefit workloads with real-time sampling or control loops, while 1 MB of Flash can accommodate substantial application code, drivers, protocol stacks, and a bootloader. Designers should verify the complete TFBGA-100 footprint, pin multiplexing, exposed-pad requirements, recommended decoupling, and operating limits against the STMicroelectronics datasheet before layout release. Firmware also requires the appropriate startup code, clock configuration, memory initialization, and peripheral pin assignments. Because the 100-pin package provides many parallel and high-speed functions, signal-integrity and manufacturing reviews should be completed before high-volume production. This product page consolidates verified manufacturer and distributor information, package and memory characteristics, commercially focused sourcing questions, same-family drop-in alternatives, and practical design guidance. It also distinguishes confirmed specifications from parameters that require confirmation in the full manufacturer datasheet.

RFQ رابطہ
STM32F765VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F765VGT6

STM32F765VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F765VGT6 is a 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of Flash memory in a 100-LQFP 14 x 14 mm package. Its 462 DMIPS performance and DSP-oriented processing make it suitable for industrial control, communications, audio, and embedded systems requiring higher real-time throughput than typical entry-level Cortex-M devices. A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F7 family belongs to the Arm Cortex-M embedded-computing hierarchy and provides integrated flash, SRAM, timers, GPIO, serial interfaces, and communication peripherals. The STM32F765VGT6 combines this embedded integration with a high-performance Cortex-M7 core and hardware caches designed to reduce execution stalls. Key verified features include up to 216 MHz operating frequency, 1 MB (1M x 8) Flash memory, a 32-bit Arm Cortex-M7 core, and a 100-LQFP package. The Cortex-M7 core includes the features identified in the provided technical data: an FPU, DSP instructions, MPU support, ART Accelerator, and separate instruction and data caches. The verified core performance is 462 DMIPS, equivalent to 2.14 DMIPS/MHz using Dhrystone 2.1. The device is positioned for applications that benefit from fast control-loop execution and substantial embedded Flash while retaining a compact 100-pin surface-mount footprint. Its package provides more external connectivity than smaller STM32 packages, allowing designers to connect multiple peripherals without moving to a higher pin-count device. Exact RAM size, voltage range, peripheral inventory, and electrical limits were not provided in the verified data and are therefore not inferred here. Typical design uses include industrial automation, motor and motion control, communications gateways, audio signal processing, data acquisition, and connected embedded equipment. In each case, firmware should use the STM32CubeMX and STM32CubeIDE ecosystems for peripheral configuration and should validate pin multiplexing, clock settings, and peripheral electrical limits against the manufacturer datasheet before production. A key design consideration is ensuring that the selected board, power supply, clock, and decoupling implementation match the device requirements. The 100-LQFP package should be laid out with controlled trace geometry and adequate ground-plane continuity; however, exact recommended capacitor values and routing dimensions require the complete manufacturer datasheet, which was not included in the supplied specification data. This page consolidates the verified manufacturer identity, core frequency, memory configuration, package, pricing references, source links, and engineering comparison points in one searchable record. Values not explicitly present in the verified data remain marked for review rather than being guessed.

RFQ رابطہ
STM32F765VGT6TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)
STM32F765VGT6TR

STM32F765VGT6TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F765VGT6TR is a 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of Flash memory in a 100-LQFP 14 x 14 mm package. Its 462 DMIPS performance and DSP-oriented processing make it suitable for industrial control, communications, audio, and embedded systems requiring higher real-time throughput than typical entry-level Cortex-M devices. A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F7 family belongs to the Arm Cortex-M embedded-computing hierarchy and provides integrated flash, SRAM, timers, GPIO, serial interfaces, and communication peripherals. The STM32F765VGT6TR combines this embedded integration with a high-performance Cortex-M7 core and hardware caches designed to reduce execution stalls. Key verified features include up to 216 MHz operating frequency, 1 MB (1M x 8) Flash memory, a 32-bit Arm Cortex-M7 core, and a 100-LQFP package. The Cortex-M7 core includes the features identified in the provided technical data: an FPU, DSP instructions, MPU support, ART Accelerator, and separate instruction and data caches. The verified core performance is 462 DMIPS, equivalent to 2.14 DMIPS/MHz using Dhrystone 2.1. The device is positioned for applications that benefit from fast control-loop execution and substantial embedded Flash while retaining a compact 100-pin surface-mount footprint. Its package provides more external connectivity than smaller STM32 packages, allowing designers to connect multiple peripherals without moving to a higher pin-count device. Exact RAM size, voltage range, peripheral inventory, and electrical limits were not provided in the verified data and are therefore not inferred here. Typical design uses include industrial automation, motor and motion control, communications gateways, audio signal processing, data acquisition, and connected embedded equipment. In each case, firmware should use the STM32CubeMX and STM32CubeIDE ecosystems for peripheral configuration and should validate pin multiplexing, clock settings, and peripheral electrical limits against the manufacturer datasheet before production. A key design consideration is ensuring that the selected board, power supply, clock, and decoupling implementation match the device requirements. The 100-LQFP package should be laid out with controlled trace geometry and adequate ground-plane continuity; however, exact recommended capacitor values and routing dimensions require the complete manufacturer datasheet, which was not included in the supplied specification data. This page consolidates the verified manufacturer identity, core frequency, memory configuration, package, pricing references, source links, and engineering comparison points in one searchable record. Values not explicitly present in the verified data remain marked for review rather than being guessed.

RFQ رابطہ
STM32F765VGT7 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F765VGT7

STM32F765VGT7 - 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F765VGT7 is an Arm Cortex-M7 32-bit microcontroller operating up to 216 MHz, with 1 MB of Flash memory and a 100-LQFP package measuring 14 mm by 14 mm. It combines the MCU, MCU+FPU category, and Cortex-M7 performance class in one embedded device. A microcontroller is a programmable system-on-chip used to supervise sensors, communications, actuators, and user interfaces. The STM32F7 family combines a high-performance CPU core with embedded memory, peripherals, and external-memory interfaces. The Cortex-M7 architecture includes DSP instructions and an FPU, while the ART Accelerator and L1 cache support efficient execution from embedded Flash and external memories. The verified data identifies a 216 MHz operating frequency, 1 MB of Flash organized as 1M x 8, 16 KB of instruction and data L1 cache, an ART Accelerator, 462 DMIPS under Dhrystone 2.1, and an FPU. The device also supports SDRAM and DFSDM, according to the supplied technical search results. These features position it for real-time control, communications, industrial equipment, IoT, and embedded automation. This device is useful when an embedded design requires substantially more processing capability than a basic Cortex-M class MCU. The Cortex-M7 core can handle signal processing, protocol management, control loops, and user-interface logic, while the 1 MB Flash capacity provides room for application firmware. The 100-LQFP package offers a conventional leaded footprint for prototype and production assembly. Typical applications include industrial controllers, motor-control systems, communications equipment, data acquisition, IoT gateways, and low-power embedded systems. The STM32F765VGT7 should be selected only when the system requires its verified 216 MHz Cortex-M7 performance, 1 MB Flash configuration, and 100-LQFP footprint. Designers must confirm peripheral assignments, pin multiplexing, voltage limits, clocking, memory requirements, and package-level details against the official STMicroelectronics documentation. For new layouts, preserve the defined 100-LQFP footprint, validate all peripheral pins before routing, and provide the required decoupling and clock circuitry specified in the manufacturer documentation. This page combines verified manufacturer and distributor information with engineering-oriented application guidance; unavailable package, electrical, and lifecycle details are marked for data completion rather than inferred.

RFQ رابطہ
STM32F765VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST
STM32F765VIH6

STM32F765VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST

The STMicroelectronics STM32F765VIH6 is a high-performance 32-bit microcontroller based on the Arm Cortex-M7 core operating at up to 216 MHz, with 2 MB of Flash memory, 462 DMIPS of processing performance, and an 8x8 mm 100-ball TFBGA package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals onto one die, serving as the computational heart of embedded systems. Within the system hierarchy, the STM32F765 belongs to the STM32F7 Series of high-performance MCUs, which sits above mainstream Cortex-M4 families and below multicore application processors, making it the workhorse choice for demanding real-time embedded control. Key features include the Arm Cortex-M7 core with double-precision FPU and Armv7E-M DSP instructions, the adaptive real-time (Art) memory accelerator that achieves 0-wait-state execution from Flash at 216 MHz, and L1 instruction and data caches that maximize performance from external memory. Peripherals include SDRAM interface support, DFSDM (digital filter for sigma-delta modulators), multiple high-speed communication interfaces, and advanced analog blocks suitable for motor control and digital power. Architecturally, the Art Accelerator and 16-Kbyte L1 instruction cache allow the Cortex-M7 to sustain its full 1082 CoreMark/MHz-class throughput even when fetching from on-chip Flash, a key differentiator from earlier Cortex-M families that required SRAM execution for peak performance. The double-precision FPU accelerates scientific and signal-processing math natively without software emulation. Typical applications include industrial motor drives and digital power conversion (leveraging DFSDM and high-resolution timers), medical and test instrumentation requiring 216 MHz DSP throughput, and high-end consumer devices with graphical displays driven via SDRAM and LCD interfaces. A key design consideration: the TFBGA package demands careful PCB design with controlled-impedance fanout, and the low core voltage is generated by an embedded regulator, so follow ST layout guidelines for VCAP capacitors and decoupling. This page synthesizes distributor pricing, verified drop-in alternatives, design guidance, and application notes not consolidated in the manufacturer datasheet.

RFQ رابطہ
STM32F765VIT6 - 2MB Flash, 512KB RAM Cortex-M7 MCU | STMicroelectronics
STM32F765VIT6

STM32F765VIT6 - 2MB Flash, 512KB RAM Cortex-M7 MCU | STMicroelectronics

The STM32F765VIT6 is a high-performance 32-bit microcontroller from STMicroelectronics based on the ARM Cortex-M7 core, operating at up to 216 MHz. It features 2 MB of Flash memory and 512 KB of SRAM, making it suitable for complex applications requiring substantial code and data storage. The device is housed in a 100-pin LQFP package (LQFP100) and supports a wide supply voltage range of 1.7V to 3.6V. Data verified as of 2026-08-05. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. In the system hierarchy, the STM32F765VIT6 is a microcontroller -> embedded processor -> integrated circuit -> semiconductor. This MCU family is part of the STM32F7 series, which is positioned as a high-performance line within the broader STM32 ecosystem, offering a balance of processing power, memory, and peripheral integration for industrial, consumer, and IoT applications. Key features include a 216 MHz ARM Cortex-M7 core with double-precision FPU, 2 MB of dual-bank Flash, 512 KB of SRAM, and a comprehensive set of peripherals: multiple 12-bit ADCs, DACs, timers, USARTs, SPIs, I2Cs, USB OTG HS/FS, Ethernet MAC, camera interface, and cryptographic acceleration. The device also includes a Chrom-ART Accelerator for 2D graphics and a TFT LCD controller, enabling rich user interfaces. The Cortex-M7 core delivers 7 CoreMark/MHz, providing high computational throughput for DSP and control applications. Technically, the STM32F765VIT6 is built on a 40nm process technology, offering low power consumption with multiple low-power modes (Sleep, Stop, Standby). It includes a memory protection unit (MPU), a cache (I-Cache and D-Cache) to optimize performance, and a flexible memory controller (FMC) for external memory expansion. The device supports a wide range of communication interfaces, making it a versatile choice for connectivity-centric designs. Typical applications include industrial control systems, motor drives, power conversion, IoT gateways, audio processing, and advanced human-machine interfaces (HMI). The combination of high clock speed, large memory, and rich peripherals makes it ideal for applications requiring real-time processing and connectivity. When designing with this MCU, pay attention to power supply decoupling: place a 100nF capacitor close to each VDD pin and a 4.7uF capacitor at the main supply. Also, ensure proper layout for the high-speed USB and Ethernet interfaces to maintain signal integrity. The device supports in-circuit programming and debugging via SWD and JTAG, facilitating development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32F765VIT6.

USD $10.37 رابطہ
STM32F765ZGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F765ZGT6

STM32F765ZGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F765ZGT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with double-precision FPU, operating at up to 216 MHz, integrating 1 MB of Flash memory and 384 KB of SRAM in a 144-pin LQFP package (20x20 mm). It delivers 462 DMIPS (2.14 DMIPS/MHz, Dhrystone 2.1) and supports DSP instructions with single-precision floating point, plus a memory protection unit (MPU) for robust embedded designs. A microcontroller (MCU) is a single-chip embedded computer that combines a processor core, on-chip memory, and programmable peripherals, sitting at the heart of nearly every modern electronic system. Within the component taxonomy, the STM32F765ZGT6 belongs to the STM32F7 series of 32-bit Flash MCUs, which falls under the broader STM32 family and the ARM Cortex-M ecosystem, serving industrial, consumer, and medical applications that demand more compute headroom than Cortex-M4 devices can deliver. The Cortex-M7 in turn inherits from ARM's Cortex-M processor lineage, while MCU itself is a hypernym of microprocessor. Key differentiating features include the Adaptive Real-Time (ART) Accelerator with 16 Kbytes I/D L1 cache enabling 0-wait-state execution from embedded Flash, the Chrom-ART Accelerator (DMA2D) that offloads 2D graphics work, and a rich peripheral set including multiple 12-bit ADCs, DACs, advanced timers, USART/UART, SPI, I2C, CAN, USB OTG full-speed/high-speed, an Ethernet MAC with IEEE 1588 support, and a camera interface. A flexible external memory controller (FMC) supports SDRAM, SRAM, and NOR/NAND Flash for large frame buffers. Technically, the Cortex-M7 6-stage pipeline with branch prediction and dual-issue capability sustains high throughput even under interrupt load, while the integrated FPU accelerates signal-processing tasks. Supply range is 1.7V to 3.6V with operation from -40C to +85C ambient for the STM32F765ZGT6 industrial grade, and the part supports Sleep, Stop, and Standby low-power modes. Typical applications include industrial automation (PLCs, motor control), human-machine interfaces with graphical TFT displays, IoT gateways where the Ethernet MAC enables precise IEEE 1588 time synchronization, and audio processing using the DSP extensions. The wide peripheral set also suits building automation, point-of-sale terminals, and medical instrumentation. Design-wise, place 100nF decoupling capacitors on each VDD pin and a 4.7uF bulk cap on the main supply, follow ST's reference layout for the HSE crystal and VREF+ analog domain, and exploit the low-power modes for battery-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, FAQ answers, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-10-10.

USD $22.97 اسٹاک میں
STM32F765ZGT6TR - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics (Tape & Reel)
STM32F765ZGT6TR

STM32F765ZGT6TR - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F765ZGT6TR is a high-performance 32-bit ARM Cortex-M7 microcontroller with double-precision FPU, operating at up to 216 MHz, integrating 1 MB of Flash memory and 384 KB of SRAM in a 144-pin LQFP package (20x20 mm). It delivers 462 DMIPS (2.14 DMIPS/MHz, Dhrystone 2.1) and supports DSP instructions with single-precision floating point, plus a memory protection unit (MPU) for robust embedded designs. A microcontroller (MCU) is a single-chip embedded computer that combines a processor core, on-chip memory, and programmable peripherals, sitting at the heart of nearly every modern electronic system. Within the component taxonomy, the STM32F765ZGT6TR belongs to the STM32F7 series of 32-bit Flash MCUs, which falls under the broader STM32 family and the ARM Cortex-M ecosystem, serving industrial, consumer, and medical applications that demand more compute headroom than Cortex-M4 devices can deliver. The Cortex-M7 in turn inherits from ARM's Cortex-M processor lineage, while MCU itself is a hypernym of microprocessor. Key differentiating features include the Adaptive Real-Time (ART) Accelerator with 16 Kbytes I/D L1 cache enabling 0-wait-state execution from embedded Flash, the Chrom-ART Accelerator (DMA2D) that offloads 2D graphics work, and a rich peripheral set including multiple 12-bit ADCs, DACs, advanced timers, USART/UART, SPI, I2C, CAN, USB OTG full-speed/high-speed, an Ethernet MAC with IEEE 1588 support, and a camera interface. A flexible external memory controller (FMC) supports SDRAM, SRAM, and NOR/NAND Flash for large frame buffers. Technically, the Cortex-M7 6-stage pipeline with branch prediction and dual-issue capability sustains high throughput even under interrupt load, while the integrated FPU accelerates signal-processing tasks. Supply range is 1.7V to 3.6V with operation from -40C to +85C ambient for the STM32F765ZGT6TR industrial grade, and the part supports Sleep, Stop, and Standby low-power modes. Typical applications include industrial automation (PLCs, motor control), human-machine interfaces with graphical TFT displays, IoT gateways where the Ethernet MAC enables precise IEEE 1588 time synchronization, and audio processing using the DSP extensions. The wide peripheral set also suits building automation, point-of-sale terminals, and medical instrumentation. Design-wise, place 100nF decoupling capacitors on each VDD pin and a 4.7uF bulk cap on the main supply, follow ST's reference layout for the HSE crystal and VREF+ analog domain, and exploit the low-power modes for battery-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, FAQ answers, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-10-10.

USD $22.97 اسٹاک میں
STM32F765ZGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F765ZGT7

STM32F765ZGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

STMicroelectronics STM32F765ZGT7 is a 32-bit Arm Cortex-M7 microcontroller with a 216 MHz maximum operating frequency, 1 MB of flash memory, and a 144-pin LQFP package measuring 20 mm by 20 mm. The device is positioned for high-performance embedded control, connected industrial equipment, audio and communications, and real-time signal-processing systems. Verified distributor data identifies it as an STM32F7-series MCU with DSP, FPU, cache, Art Accelerator, SDRAM, and DFSDM capabilities. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, data memory, peripherals, and communication interfaces into one device. The STM32F7 family belongs to the embedded MCU hierarchy and uses the Arm Cortex-M7 RISC architecture. This combination provides a high-performance platform for real-time control while retaining the software portability and ecosystem benefits associated with Arm Cortex-M processors. The STM32F765ZGT7 headline features are its 216 MHz Cortex-M7 core, 1 MB flash capacity, and 144-pin LQFP footprint. Its architecture is designed for high-performance and DSP applications, with the verified sources specifically listing an FPU, cache, Art Accelerator, SDRAM, and DFSDM. The LQFP package provides a large lead count and a mechanically accessible footprint for industrial, communications, and embedded-control boards. Exact RAM, voltage range, peripheral inventory, and temperature limits are not provided in the supplied verified data. The STM32F765xx family combines a 32-bit RISC core with high-performance and DSP-oriented processing. The FPU accelerates floating-point workloads, while cache support can improve instruction and data access behavior in suitable workloads. SDRAM support is relevant for systems requiring external memory, and DFSDM can support applications involving digital filter or ADC-related signal acquisition. These features make the MCU suitable where deterministic control and higher computational throughput are needed beyond a basic general-purpose microcontroller. Typical applications include industrial automation, communications equipment, consumer electronics, medical-device control, automotive electronics, and real-time embedded systems. The 216 MHz operating speed is useful for protocol processing, control loops, and signal-processing tasks, while 1 MB flash provides room for larger firmware and application code. Engineers should verify the complete pinout, electrical limits, memory map, peripheral availability, and package details in the official STMicroelectronics datasheet before final PCB release. A key design consideration is package and firmware verification. Because the supplied evidence confirms a 144-pin LQFP package and a 1 MB flash configuration but does not provide a complete verified pin table, do not rely on generic STM32F7 pin assumptions. Confirm the exact STM32F765ZGT7 datasheet, board support package, clock tree, power rails, decoupling, and exposed thermal requirements. XAIPART provides the product record, source links, pricing tiers, and engineering guidance, while missing technical values remain explicitly marked for validation. This page combines verified distributor availability, the official STMicroelectronics family description, package and processor specifications, application context, and replacement-screening guidance. It is intended to accelerate component search and engineering review without inventing electrical values that were not supplied by the verified sources.

RFQ رابطہ
STM32F765ZIT6 - 216MHz Cortex-M7 MCU, 2MB Flash, LQFP-144 | STMicroelectronics
STM32F765ZIT6

STM32F765ZIT6 - 216MHz Cortex-M7 MCU, 2MB Flash, LQFP-144 | STMicroelectronics

The STMicroelectronics STM32F765ZIT6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, packaged in a 144-pin LQFP with 2 MB of embedded Flash and 512 KB of SRAM. It integrates a double-precision FPU, DSP instructions, and a 16-Kbyte I-cache plus 16-Kbyte D-cache, enabling 0-wait-state execution from Flash at full 216 MHz speed and delivering up to 462 DMIPS (2.14 DMIPS/MHz). The LQFP-144 footprint also exposes the full set of high-speed peripherals required for graphics, Ethernet, and USB 2.0 HS workloads. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals such as timers, ADCs, and communication interfaces. The STM32F7 family sits at the high-performance end of the Cortex-M hierarchy — Cortex-M7 > Cortex-M4 > Cortex-M3 > Cortex-M0 — and is a member of the broader Arm Cortex-M MCU taxonomy under embedded microcontrollers, semiconductor devices, and integrated circuits. Within ST's portfolio, the F7 line bridges Cortex-M4-class parts (such as the STM32F4 series) and Cortex-M7 application processors. Key features include up to 17 timers (including motor-control, HRTIM, and 32-bit timers), two 12-bit ADCs sampling at 2.4 MSPS, two 12-bit DACs, a true random number generator (RNG), cryptographic accelerators, and a Chrom-ART accelerator for offloading GUI rendering. An integrated 2.4-inch TFT-LCD controller (LTDC) supports up to XGA resolution without an external graphics chip, while USB 2.0 High-Speed with on-chip PHY and 10/100 Ethernet with IEEE 1588 make the part attractive for connected embedded designs. Architecturally, the Cortex-M7 core pairs a 6-stage superscalar pipeline with branch prediction and tightly-coupled memory for deterministic interrupt response. The 2 MB of dual-bank Flash supports read-while-write for safe in-field firmware upgrades, and the 512 KB SRAM is split into multiple AHB-matrix regions for simultaneous DMA and CPU access. This bandwidth is what allows driving parallel TFT displays while running DSP-style audio or motor-control loops concurrently. Typical applications include industrial HMI panels with TFT-LCD touchscreens, motor-control and field-oriented control drives, industrial Ethernet gateways, USB audio interfaces, and barcode/scanner modules. Specific uses range from PLC operator panels to medical instrumentation front-ends and office printers requiring raster image processing. When PCB area is constrained, designers often migrate to the LQFP-100 or LQFP-176 versions of the same silicon, but the ZIT6 in LQFP-144 maximizes peripheral exposure without stepping up to a BGA. For power-supply design, the part requires a 1.8V to 3.6V supply with decoupling on every VDD/VBAT pin; bypassing must keep PCB track inductance below roughly 1 nH to avoid noise coupling into the PLL. Trade-off: peak performance at 216 MHz pushes core current beyond 100 mA, so efficiency-aware designs often drop to 180 MHz when full throughput is not required. This page synthesizes distributor pricing, same-package drop-in alternatives from across the STM32 family, and design notes not contained in a single manufacturer datasheet.

RFQ رابطہ
STM32F765ZIT7 - 216MHz Cortex-M7 MCU, 2MB Flash, 144-LQFP | STMicroelectronics (Tape & Reel)
STM32F765ZIT7

STM32F765ZIT7 - 216MHz Cortex-M7 MCU, 2MB Flash, 144-LQFP | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F765ZIT7 is a high-performance ARM Cortex-M7 32-bit RISC microcontroller with FPU, operating at up to 216 MHz and delivering 462 DMIPS of compute throughput, housed in a 144-pin LQFP (20x20 mm) package. It integrates 2 MB of embedded Flash and 512+16+4 KB of SRAM, plus an extensive set of high-speed peripherals including USB OTG HS/FS, two CAN 2.0B interfaces, an LCD-TFT controller, an MIPI-DSI host, and a hardware cryptographic accelerator suite. The 'I' suffix denotes the industrial-grade (-40C to +85C) operating range, and 'TR' designates Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. The Cortex-M7 is ARM's highest-performance Cortex-M core, featuring a six-stage superscalar pipeline, branch prediction, and an integrated single-precision floating-point unit; it sits at the top of the Cortex-M family alongside the Cortex-M4 and Cortex-M33. STM32F7-series MCUs belong to the broader ARM Cortex-M taxonomy, which itself falls under 32-bit RISC microcontrollers and, more generally, embedded microprocessors and semiconductor ICs. Compared with Cortex-M4 parts, the Cortex-M7 offers roughly doubled DSP performance and is aimed at demanding signal-processing and graphics workloads. Key features that distinguish this part include the dual-bank 2 MB Flash with ART Accelerator for zero-wait-state execution from Flash, 16-bit and 32-bit timers, up to 28 communication interfaces (USART/UART/SPI/I2S/I2C), a 12-bit ADC reaching 2.4 MSPS, two 12-bit DACs, an SDMMC host interface for external SD cards or eMMC, and an Ethernet MAC with dedicated DMA. The integrated cryptographic accelerator (AES-256, SHA-1/SHA-2, HMAC, and TRNG) enables hardware-bound secure boot and TLS/SSL offload. The Chrom-ART Accelerator 2D DMA engine accelerates bitmap operations for HMI applications. Typical applications include industrial motor drives and PLCs, medical patient-monitoring and diagnostic equipment, human-machine interface (HMI) panels with TFT-LCD or DSI displays, factory-automation controllers with EtherCAT/PROFINET bridges, point-of-sale terminals, building-automation gateways, and audio-processing units including USB audio class endpoints. The 216 MHz Cortex-M7 with single-precision FPU and DSP extensions makes the part particularly suited to real-time FFT-based analytics, digital filtering, and motor-control algorithms using FOC (field-oriented control). Pin-compatible upgrades within the STM32F765 family extend to the STM32F767/F769 line for projects that need additional MIPI-DSI lanes or the SPDIF interface. When designing with this MCU, attention must be paid to decoupling (1 uF + 100 nF near each VDD pin), the layout of the 25 MHz HSE crystal traces within 5 mm of the OSC_IN/OSC_OUT pins, and the thermal dissipation in continuous high-CPU-load scenarios. The 144-LQFP package has a thermal resistance of approximately 38 C/W (theta_JA on a 4-layer JEDEC board) and is adequate for industrial operating points up to about 0.8 W steady-state dissipation without airflow. This page synthesizes 144-LQFP same-package drop-in alternatives, distributor pricing tiers, and practical design notes not found in a single source.

RFQ رابطہ
STM32F765ZIT7TR - 216MHz Cortex-M7 MCU, 2MB Flash, 144-LQFP | STMicroelectronics
STM32F765ZIT7TR

STM32F765ZIT7TR - 216MHz Cortex-M7 MCU, 2MB Flash, 144-LQFP | STMicroelectronics

The STMicroelectronics STM32F765ZIT7TR is a high-performance ARM Cortex-M7 32-bit RISC microcontroller with FPU, operating at up to 216 MHz and delivering 462 DMIPS of compute throughput, housed in a 144-pin LQFP (20x20 mm) package. It integrates 2 MB of embedded Flash and 512+16+4 KB of SRAM, plus an extensive set of high-speed peripherals including USB OTG HS/FS, two CAN 2.0B interfaces, an LCD-TFT controller, an MIPI-DSI host, and a hardware cryptographic accelerator suite. The 'I' suffix denotes the industrial-grade (-40C to +85C) operating range, and 'TR' designates Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. The Cortex-M7 is ARM's highest-performance Cortex-M core, featuring a six-stage superscalar pipeline, branch prediction, and an integrated single-precision floating-point unit; it sits at the top of the Cortex-M family alongside the Cortex-M4 and Cortex-M33. STM32F7-series MCUs belong to the broader ARM Cortex-M taxonomy, which itself falls under 32-bit RISC microcontrollers and, more generally, embedded microprocessors and semiconductor ICs. Compared with Cortex-M4 parts, the Cortex-M7 offers roughly doubled DSP performance and is aimed at demanding signal-processing and graphics workloads. Key features that distinguish this part include the dual-bank 2 MB Flash with ART Accelerator for zero-wait-state execution from Flash, 16-bit and 32-bit timers, up to 28 communication interfaces (USART/UART/SPI/I2S/I2C), a 12-bit ADC reaching 2.4 MSPS, two 12-bit DACs, an SDMMC host interface for external SD cards or eMMC, and an Ethernet MAC with dedicated DMA. The integrated cryptographic accelerator (AES-256, SHA-1/SHA-2, HMAC, and TRNG) enables hardware-bound secure boot and TLS/SSL offload. The Chrom-ART Accelerator 2D DMA engine accelerates bitmap operations for HMI applications. Typical applications include industrial motor drives and PLCs, medical patient-monitoring and diagnostic equipment, human-machine interface (HMI) panels with TFT-LCD or DSI displays, factory-automation controllers with EtherCAT/PROFINET bridges, point-of-sale terminals, building-automation gateways, and audio-processing units including USB audio class endpoints. The 216 MHz Cortex-M7 with single-precision FPU and DSP extensions makes the part particularly suited to real-time FFT-based analytics, digital filtering, and motor-control algorithms using FOC (field-oriented control). Pin-compatible upgrades within the STM32F765 family extend to the STM32F767/F769 line for projects that need additional MIPI-DSI lanes or the SPDIF interface. When designing with this MCU, attention must be paid to decoupling (1 uF + 100 nF near each VDD pin), the layout of the 25 MHz HSE crystal traces within 5 mm of the OSC_IN/OSC_OUT pins, and the thermal dissipation in continuous high-CPU-load scenarios. The 144-LQFP package has a thermal resistance of approximately 38 C/W (theta_JA on a 4-layer JEDEC board) and is adequate for industrial operating points up to about 0.8 W steady-state dissipation without airflow. This page synthesizes 144-LQFP same-package drop-in alternatives, distributor pricing tiers, and practical design notes not found in a single source.

RFQ رابطہ
STM32F767BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F767BGT6

STM32F767BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F767BGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, built around the Arm® Cortex®-M7 core with a floating-point unit (FPU) and digital signal processing (DSP) instructions. Operating at up to 216 MHz, it delivers 462 DMIPS, making it suitable for demanding embedded applications. The device integrates 1 MB of flash memory and 512 KB of SRAM, along with a rich set of peripherals including USB OTG HS/FS, multiple communication interfaces, an LCD controller, and a DSI host. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F7 series sits at the high-performance end of the STM32 portfolio, positioned above the mainstream F4 series and below the application processors in the STM32MP1 line. This hierarchy places the STM32F767BGT6 as a top-tier MCU for applications requiring significant compute power and connectivity. Key features include a 216 MHz Arm Cortex-M7 core with double-precision FPU, 1 MB of flash memory, 512 KB of SRAM, and a comprehensive set of peripherals. The device supports a wide range of communication interfaces, including USB OTG HS/FS, Ethernet, multiple USARTs, SPIs, I2Cs, and CAN. It also features an LCD-TFT controller and a DSI host, enabling direct connection to displays. The STM32F767BGT6 is available in a 208-pin LQFP package (28x28 mm), providing ample I/O for complex designs. The STM32F767BGT6 leverages the Arm Cortex-M7 architecture, which includes a 6-stage pipeline, branch prediction, and a memory protection unit (MPU). The FPU supports both single and double precision, accelerating mathematical operations for signal processing and control algorithms. The device also includes a Chrom-ART Accelerator™ for 2D graphics, offloading the CPU for graphical user interfaces. With its high clock speed and advanced peripherals, the STM32F767BGT6 excels in applications such as industrial control, motor control, audio processing, and human-machine interfaces. Typical applications include high-end industrial automation, robotics, audio processing, and advanced human-machine interfaces. The device's high performance and rich peripheral set make it ideal for applications requiring real-time control and complex user interfaces. For example, in industrial automation, the STM32F767BGT6 can handle multiple communication protocols simultaneously while executing complex control algorithms. When designing with the STM32F767BGT6, ensure adequate power supply decoupling with 100 nF capacitors close to each power pin and a bulk capacitor. The device supports a wide supply voltage range of 1.7V to 3.6V, allowing flexible power design. For high-speed communication interfaces, pay attention to PCB layout to maintain signal integrity.

USD $11.55 رابطہ
STM32F767BIT6 - ARM Cortex-M7 MCU, 2MB Flash, 216MHz | STMicroelectronics
STM32F767BIT6

STM32F767BIT6 - ARM Cortex-M7 MCU, 2MB Flash, 216MHz | STMicroelectronics

The STMicroelectronics STM32F767BIT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU, 2 MB of embedded Flash and 512 KB of SRAM, integrated into a 208-pin LQFP (28x28 mm) package. Key headline specifications include a 216 MHz maximum CPU clock delivering 462 DMIPS (2.14 DMIPS/MHz, Dhrystone 2.1), DSP instructions and an ART Accelerator with 16 KB I/D L1 cache enabling zero-wait-state execution from Flash. The device integrates a Cryptography accelerator (AES-256, Hash, RNG) and an Embedded SDRAM controller supporting external SDRAM up to 32-bit wide. What is a Cortex-M7 MCU? An ARM Cortex-M7 microcontroller is a high-end 32-bit microcontroller core designed by Arm for deterministic real-time embedded systems. The Cortex-M7 belongs to the Cortex-M family and is positioned above Cortex-M4 by adding a double-precision FPU, single-precision floating-point pipeline, branch prediction, and tightly-coupled instruction/data caches. The STM32F7 line is part of ST's mainstream performance tier that also introduces MIPI-DSI display, USB Type-C / Power Delivery and a richer analog set over the F4 generation, making it suitable for industrial control, audio DSP, HMI graphics and motor-control loops. Key features of the STM32F767BIT6 include: up to 18 timer channels, three 12-bit ADC converters (up to 2.4 MSPS each), two 12-bit DACs, a USB 2.0 OTG full-speed/high-speed PHY, two CAN 2.0B controllers, an SDIO/MMC interface, a Quad-SPI flash interface and an LCD-TFT controller. The Cryptography block accelerates AES-256, SHA-1/SHA-2 hashing, and true RNG, easing secure-boot and TLS link setups. The 208-LQFP footprint routes out 162 GPIO pins plus a wide parallel-interface bus, sufficient for SDRAM + TFT display + Ethernet + USB Type-C concurrently. The architecture pairs a dual-issue FPU + DSP pipeline with ART Accelerator to minimise flash wait-states; combined with the 16 KB L1 cache, the device achieves 462 DMIPS at 216 MHz with deterministic interrupt latency of <30 ns typical. Cryptography hardware offloads AES, SHA-1/2 and RNG; this dramatically reduces CPU overhead in TLS handshakes compared to software-only implementations. Embedded SRAM is split into 384 KB DTCM + 128 KB SRAM + 4 KB backup SRAM, with the SDRAM controller extending external memory up to 32-bit wide for display or data buffers. Typical applications are industrial HMI panels, motor drives and servo controllers, USB-C PD chargers and audio DSP platforms. The combination of TFT-LCD controller + DMA2D + SDRAM controller + USB high-speed on-chip PHY makes the F767 a single-chip candidate for 4.3-inch touchscreen displays with secure field updates. When designing with this device the 1.7-3.6 V supply and an external 25 MHz HSE crystal (with optional LSE 32.768 kHz for RTC) must be provided. Decoupling follows ST AN4365 placement rules: 100 nF + 4.7 µF near each VDD/VSS pair, plus a dedicated 1 µF bulk for the USB OTG PHY rail. For SDRAM operation use layed-out matched length with VREF = VDD/2 and 50 Ω impedance; bypass VBAT with a 0.1 µF cap if no battery is fitted.

RFQ رابطہ