AD602JRZ vs AD602JR موازنہ
تفصیلی ساتھ ساتھ موازنہ از AD602JRZ بذریعہ Analog Devices اور AD602JR بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | AD602JRZ | AD602JR |
|---|---|---|
| برانڈ | Analog Devices | Analog Devices |
| زمرہ | Amplifier ICs | Amplifier ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Amplifier Type | Dual-channel variable gain amplifier | — |
| Number of Channels | 2 channels | 2 channels |
| Gain Range | −10 dB to +30 dB per channel | -10 dB to +30 dB |
| Maximum Gain | 31.07 dB | — |
| −3 dB Bandwidth | 35 MHz nominal | — |
| Bandwidth Dependence on Gain | Nominally independent of gain | — |
| Positive Supply Voltage | Up to +5.25 V | — |
| Negative Supply Voltage | Down to −5.25 V | — |
| Total Supply Span | Up to 10.5 V | — |
| Gain Control Logic Compatibility | TTL- and CMOS-compatible | — |
| پیکیج | 16-lead SOIC | — |
| ماؤنٹنگ ٹائپ | Surface mount | Surface mount |
| آپریٹنگ درجہ حرارت | 0°C to +70°C | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Channel Architecture | — | 2 independent gain-control channels |
| Gain-Control Response | — | Linear in dB |
| Gain Accuracy | — | 0.3 dB accurate absolute gain |
| Input Noise Density | — | 1.4 nV/√Hz |
| -3 dB Bandwidth | — | 35 MHz |
| Total Harmonic Distortion | — | -60 dBc THD at 1 V output |
| Number of Gain Ranges | — | 2 gain ranges |
| Upper Gain Range | — | +30 dB |
| Package Type | — | 16-lead SOIC |
| Primary Application | — | Ultrasound imaging |
| Signal Type | — | Analog |
| Control Interface | — | Analog gain control |
| آپریٹنگ درجہ حرارت رینج | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| کوئیسینٹ کرنٹ | — | [DATA_NEEDED: quiescent current] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |