ATSAMD21-XPRO vs ATSAMC21-XPRO موازنہ
تفصیلی ساتھ ساتھ موازنہ از ATSAMD21-XPRO بذریعہ Microchip Technology اور ATSAMC21-XPRO بذریعہ Microchip Technology. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Microchip Technology
ATSAMD21-XPRO - SAM D21 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMD21-XPRO ✓ فعالMicrochip Technology
ATSAMC21-XPRO - SAM C21 Xplained Pro Evaluation Kit | Microchip
ATSAMC21-XPRO ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | ATSAMD21-XPRO | ATSAMC21-XPRO |
|---|---|---|
| برانڈ | Microchip Technology | Microchip Technology |
| زمرہ | Development Boards | Development Boards |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | Evaluation Board (Xplained Pro) | Evaluation / Development Board |
| Target MCU | ATSAMD21J18A | ATSAMC21J18A |
| Core Processor | ARM Cortex-M0+ 32-bit | ARM Cortex-M0+ 32-bit |
| CPU Max Frequency | 48 MHz | — |
| Flash Memory (on-chip) | 256 KB | — |
| SRAM | 32 KB | — |
| On-board SPI Flash | 1 MB | — |
| Low-frequency Crystal | 32.768 kHz | — |
| High-frequency Crystal | 12 MHz | — |
| Debug Interface | nEDBG (CMSIS-DAP) on-board | USB (micro-B) to host PC |
| USB Connectors | 1x Micro-B (debug/CDC), 1x Micro-B (target) | — |
| Extension Headers | 3x 20-pin Xplained Pro (compatible with I/O1, OLED1, QT1, PROTO1) | 3x Xplained Pro (EXT1, EXT2, EXT3) |
| User Inputs | 1x mechanical reset button, 1x user touch button | — |
| User Outputs | 1x user LED | — |
| Arduino-compatible Headers | Yes (subset of ATSAMD21J18A I/O) | — |
| Operating Voltage (target) | 3.3 V | — |
| Board Power Source | USB Micro-B | — |
| Supported IDEs | MPLAB X IDE, Atmel Studio 7, Atmel START | — |
| RoHS اسٹیٹس | Compliant | Compliant |
| Form Factor | Xplained Pro standard (approx 88 mm x 53 mm) | — |
| Core Architecture | — | ARMv6-M |
| Operating Frequency | — | [DATA_NEEDED: max MHz] |
| On-board Flash (target MCU) | — | 256 KB |
| On-board SRAM (target MCU) | — | 32 KB |
| Supply Voltage (board) | — | 5V via USB or external |
| Digital I/O Voltage | — | 5V tolerant |
| On-board Debugger | — | EDBG (CMSIS-DAP / DGI / CDC) |
| Current Measurement Header | — | 1x2 100 mil, marked MCU current |
| Buttons | — | Reset + 2x QTouch |
| LEDs | — | Power LED + Status LED + User LED |
| On-board MCU Package | — | 64-pin TQFP / VQFN-style |
| آپریٹنگ درجہ حرارت | — | 0C to +70C (commercial dev kit) |