CP2103-GMR vs CP2104-F03-GMR موازنہ
تفصیلی ساتھ ساتھ موازنہ از CP2103-GMR بذریعہ Silicon Labs اور CP2104-F03-GMR بذریعہ Silicon Labs. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | CP2103-GMR | CP2104-F03-GMR |
|---|---|---|
| برانڈ | Silicon Labs | Silicon Labs |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | NRND | فعال |
| Product Type | USB 2.0 to UART bridge controller | — |
| USB Interface | USB 2.0 | — |
| سپلائی وولٹیج | 3 V to 3.6 V | 3 V to 3.6 V (VDD) |
| UART Interface | Asynchronous serial data bus | — |
| Digital I/O Pins | 4 | — |
| Internal EEPROM | 1024 bytes | — |
| External Crystal Requirement | No external crystal required | — |
| پیکیج | 28-pin QFN (5 x 5 mm) exposed-pad package | 24-QFN (4x4 mm) with exposed pad |
| ماؤنٹنگ ٹائپ | Surface mount | Surface Mount |
| Lead-Free Status | Lead free | — |
| RoHS اسٹیٹس | Compliant | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| آپریٹنگ درجہ حرارت | [DATA_NEEDED: operating temperature range] | -40C to +85C |
| UART Baud Rate | [DATA_NEEDED: supported UART baud rate] | — |
| USB Operating Speed | [DATA_NEEDED: USB operating speed] | — |
| تھرمل ریزسٹنس | [DATA_NEEDED: package thermal resistance] | — |
| Recommended PCB Land Pattern | [DATA_NEEDED: manufacturer land-pattern dimensions] | — |
| Driver Support | Royalty-free device drivers | — |
| EEPROM Configuration Fields | Vendor ID, product ID, serial number, power descriptor, release number, and product description | — |
| Evaluation Kit | CP2103EK | — |
| Lifecycle Recommendation | Not Recommended for New Designs | — |
| فنکشن | — | USB 2.0 to UART bridge controller |
| USB Standard | — | USB 2.0 full speed, 12 Mbps |
| UART Channels | — | 1 |
| Baud Rate Range | — | 300 bps to 2 Mbps (programmable) |
| FIFO Buffer | — | 576 byte |
| I/O Supply (VIO) | — | 1.8 V, 3 V to 3.6 V |
| On-Chip Regulator Output | — | 3.45 V |
| Non-Volatile Memory | — | 1024 byte one-time-programmable ROM |
| GPIO | — | 4 digital I/O pins |
| Flow Control | — | ~RTS, ~CTS, ~DTR, ~DSR, ~DCD, ~RI |
| Integrated Clock | — | Yes (no external crystal required) |
| Integrated USB Transceiver | — | Yes (no external resistors required) |
| Power-On Reset | — | On-chip |