CY7C65213-32LTXIT vs CY7C65213-32LTXI موازنہ
تفصیلی ساتھ ساتھ موازنہ از CY7C65213-32LTXIT بذریعہ Infineon اور CY7C65213-32LTXI بذریعہ Infineon. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | CY7C65213-32LTXIT | CY7C65213-32LTXI |
|---|---|---|
| برانڈ | Infineon | Infineon |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| فنکشن | USB to UART bridge controller | — |
| USB Interface | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Data Rate | Up to 3 Mbps | — |
| Protocol Support | RS232 / RS485 / RS422 | — |
| Number of GPIOs | 8 | — |
| Embedded Memory | 512-byte flash | — |
| Internal Regulator | Yes (3.3 V output) | — |
| Internal Oscillator | Yes (no external crystal required) | — |
| سپلائی وولٹیج | 3.3 V / 5 V | — |
| پیکیج | 32-QFN (5x5 mm) with exposed pad | 32-QFN |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface mount |
| آپریٹنگ درجہ حرارت | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| سپلائی کرنٹ | [DATA_NEEDED: typical operating supply current] | — |
| ESD Rating | [DATA_NEEDED: ESD rating] | — |
| MSL لیول | [DATA_NEEDED: moisture sensitivity level] | — |
| RoHS اسٹیٹس | Compliant (Pb-free / -IT suffix per Infineon ordering code) | [DATA_NEEDED: RoHS status] |
| Packaging | Tape and Reel (T suffix) | — |
| Product Type | — | USB-to-UART bridge controller |
| USB Standard | — | USB 2.0 Full-Speed |
| UART Maximum Data Rate | — | 3 Mbps |
| GPIO Count | — | 8 GPIOs |
| Serial Interface Support | — | RS232/RS422 |
| Package Dimensions | — | 5 mm × 5 mm |
| USB Suspend Support | — | SLEEP# asserted during USB suspend |
| Power Architecture | — | Fully integrated USB-to-UART bridge |
| Legacy UART Upgrade | — | Supports upgrading UART-based devices to USB |
| Operating Voltage | — | [DATA_NEEDED: operating voltage] |
| UART Electrical Levels | — | [DATA_NEEDED: UART logic levels] |
| Clock or Crystal Requirement | — | [DATA_NEEDED: clock or crystal requirement] |
| USB Bus-Powered Suspend Current | — | [DATA_NEEDED: suspend current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |