ISO8200BTR vs MAX14854GWE+ موازنہ
تفصیلی ساتھ ساتھ موازنہ از ISO8200BTR بذریعہ STMicroelectronics اور MAX14854GWE+ بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
STMicroelectronics
ISO8200BTR - Galvanic Isolated 8-Ch High-Side Smart SSR | STMicroelectronics
ISO8200BTR ✓ فعال
خصوصیات کا موازنہ
| پیرامیٹر | ISO8200BTR | MAX14854GWE+ |
|---|---|---|
| برانڈ | STMicroelectronics | Analog Devices |
| زمرہ | Power MOSFET Drivers | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | Galvanic Isolated 8-Channel High-Side Smart Solid-State Relay | Isolated full-duplex RS-485/RS-422 transceiver |
| Number of Channels | 8 | — |
| ٹوپولوجی | High-side switch | — |
| On-Resistance (per channel) | 0.11 ohm (typical) | — |
| Output Current per Channel | 700 mA | — |
| Load Voltage (max) | 45 V | — |
| Galvanic Isolation Domains | 2 (VCC power stage, VDD digital stage) | — |
| Supply Voltage Domains | VCC (logic/power), VDD (digital) | — |
| Quiescent Supply Current | Very low (per datasheet) | — |
| Protection Functions | Loss of GND, undervoltage shutdown, reset | — |
| پیکیج | PowerSO-36 (slug up, thermally enhanced) | 16-pin WSOIC |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface mount |
| آپریٹنگ درجہ حرارت | Industrial grade | [DATA_NEEDED: operating temperature range] |
| RoHS اسٹیٹس | ROHS3 Compliant | [DATA_NEEDED: RoHS status] |
| Primary Application | Industrial PLC digital outputs / 24 V load switching | — |
| Supply Voltage Range | — | 1.71V to 5.5V |
| Maximum Data Rate | — | 25Mbps |
| Low-Speed Data Rate | — | 500kbps |
| Galvanic Isolation | — | 2.75kV RMS for 60 seconds |
| ESD Protection | — | ±35kV |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Supported Protocols | — | RS-485 and RS-422 |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Isolation Technology | — | [DATA_NEEDED: isolation technology] |
| REACH Status | — | [DATA_NEEDED: REACH status] |