LM2901VN vs LM2901N موازنہ
تفصیلی ساتھ ساتھ موازنہ از LM2901VN بذریعہ onsemi اور LM2901N بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | LM2901VN | LM2901N |
|---|---|---|
| برانڈ | onsemi | Texas Instruments |
| زمرہ | Amplifier ICs | Amplifier ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Comparator Type | Quad differential voltage comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | — |
| Maximum Supply Voltage | 36 V | 36 V |
| سپلائی وولٹیج | ±18 V or 36 V total | — |
| آؤٹ پٹ کی قسم | Open collector | Open collector |
| پیکیج | 14-pin PDIP | 14-pin DIP |
| ماؤنٹنگ ٹائپ | Through-hole | Through hole |
| Common-Mode Input Range | Includes ground | — |
| Logic Compatibility | TTL, MOS, and CMOS compatible | TTL, DTL, MOS, ECL, and CMOS output compatibility |
| Differential Input Voltage | ±38 V maximum-rated range | — |
| Low Power Supply Current | [DATA_NEEDED: supply current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | 25 nA typical |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | [DATA_NEEDED: output saturation voltage] |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | — |
| RoHS اسٹیٹس | Compliant | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | not_applicable |
| Supply Configuration | — | Single or split supply |
| Input Offset Current | — | ±5.0 nA typical |
| Supply Current Drain | — | 800 µA typical |
| آپریٹنگ درجہ حرارت | — | -40 °C to +85 °C |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Response Time | — | [DATA_NEEDED: comparator response time] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |