LTC2309IF vs LTC2312CTS8-12 موازنہ

تفصیلی ساتھ ساتھ موازنہ از LTC2309IF بذریعہ Analog Devices اور LTC2312CTS8-12 بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔

Analog Devices
LTC2309IF LTC2309IF - 12-Bit 8-Ch SAR ADC, I2C, 5V | Analog Devices

LTC2309IF - 12-Bit 8-Ch SAR ADC, I2C, 5V | Analog Devices

LTC2309IF ✓ فعال
Analog Devices
LTC2312CTS8-12 LTC2312CTS8-12 - 12-Bit 500ksps SAR ADC, TSOT-23-8 | Analog Devices

LTC2312CTS8-12 - 12-Bit 500ksps SAR ADC, TSOT-23-8 | Analog Devices

LTC2312CTS8-12 ✓ فعال

خصوصیات کا موازنہ

پیرامیٹر LTC2309IF LTC2312CTS8-12
برانڈ Analog Devices Analog Devices
زمرہ ADC/DAC ADC/DAC
لائف سائیکل کی حالت فعال فعال
ریزولوشن 12 bit 12 bits
Number of Input Channels 8 single-ended / 4 differential —
Architecture SAR (Successive Approximation Register) SAR (Successive Approximation)
Conversion Time 1.3 us per channel (typical) —
Throughput Rate up to 500 ksps (datasheet-dependent) —
Supply Voltage (VDD) 5 V single supply —
سپلائی کرنٹ 300 uA at 1 ksps (typical) 3 mA
Digital Interface I2C-compatible, standard / fast / high-speed modes SPI/QSPI/MICROWIRE-compatible serial
I2C Address Selection 2 pins (AD0, AD1) - up to 4 devices on one bus —
Internal Reference 2.5 V, 10 ppm/C typical drift —
External Reference Input (REFIN) Yes, supports ratiometric operation —
Sample-and-Hold Fully differential, common-mode noise rejection —
Analog Input Range 0 V to VDD (unipolar); +/-VREF differential —
پیکیج 20-TSSOP (FE) TSOT-23-8
Operating Temperature Range (I grade) -40 C to +85 C —
شٹ ڈاؤن کرنٹ Nap / I2C power-down supported —
RoHS اسٹیٹس Compliant (PBF suffix) Compliant
Sample Rate — 500 ksps
Number of Channels — 1
سپلائی وولٹیج — 3 V or 5 V single supply
INL (Max) — ±0.5 LSB
Logic I/O Voltage — 1.8 V to 5 V
Integrated Reference — 2.5 V, 20 ppm/°C max drift
External Reference Support — Yes (REF pin)
Reference Buffer — Integrated
RESET / SYNC Input — Hardware (pin 8)
آپریٹنگ درجہ حرارت — -40 °C to +85 °C
ماؤنٹنگ ٹائپ — Surface Mount
MSL لیول — [DATA_NEEDED: MSL rating]

Datasheets اور وسائل

تمام مصنوعات براؤز کریں BOM بنائیں قیمت کی درخواست کریں