MAX3387EEUG+ vs MAX3387ECUG+ موازنہ
تفصیلی ساتھ ساتھ موازنہ از MAX3387EEUG+ بذریعہ Analog Devices اور MAX3387ECUG+ بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | MAX3387EEUG+ | MAX3387ECUG+ |
|---|---|---|
| برانڈ | Analog Devices | Analog Devices |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| فنکشن | Transceiver | — |
| Protocol | RS-232 | — |
| Number of Drivers/Receivers | 3/3 | — |
| Duplex | Full | — |
| ڈیٹا ریٹ | 250 kbps | — |
| سپلائی وولٹیج | 3.0 V to 5.5 V | — |
| ESD Protection (RS-232 pins) | ±15 kV (HBM); ±15 kV IEC 61000-4-2 Air Gap | — |
| آپریٹنگ درجہ حرارت | -40 °C to +85 °C | — |
| پیکیج | 24-TSSOP (4.40 mm) | 24-pin TSSOP |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface mount |
| Shutdown Current (AutoShutdown Plus) | 1 µA typical | — |
| External Capacitors | 4 × 0.1 µF | — |
| INVALID Output | Active-low, three drivers | — |
| Standards Compliance | EIA/TIA-232, V.28/V.24 | — |
| RoHS اسٹیٹس | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Transceiver Configuration | — | 3 transmitters and 3 receivers |
| Supply Voltage Range | — | 3 V to 5.5 V |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Data Rate | — | 250 kbps |
| Communications Standard | — | EIA/TIA-232 and V.28/V.24 |
| ESD Protection | — | ±15 kV |
| Charge-Pump Capacitor Count | — | 4 capacitors |
| Charge-Pump Capacitance | — | 0.1 uF each |
| Power Architecture | — | Dual charge pump |
| Transmitter Output Stage | — | Proprietary low-dropout design |
| Power Management Feature | — | AutoShutdown Plus |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| آپریٹنگ درجہ حرارت رینج | — | [DATA_NEEDED: operating temperature range] |
| سپلائی کرنٹ | — | [DATA_NEEDED: supply current] |
| Logical Input High Voltage | — | [DATA_NEEDED: logical input high voltage] |
| RS-232 Output Voltage Levels | — | [DATA_NEEDED: driver output voltage levels] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Standard Packaging Quantity | — | [DATA_NEEDED: standard packaging quantity] |