MAX3488CSA+ vs MAX3488ESA+ موازنہ
تفصیلی ساتھ ساتھ موازنہ از MAX3488CSA+ بذریعہ Analog Devices اور MAX3488ESA+ بذریعہ Maxim Integrated. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Analog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | MAX3488CSA+ | MAX3488ESA+ |
|---|---|---|
| برانڈ | Analog Devices | Maxim Integrated |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| سپلائی وولٹیج | 3.3 V | 3.3 V |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver Edge Control | Slew-rate limited | — |
| Communication Standard | RS-485/RS-422 | — |
| پیکیج | 8-pin NSOIC | 8-SOIC |
| ماؤنٹنگ ٹائپ | Surface mount | Surface Mount |
| Low-Power Family | 3.3 V, low-power transceiver | — |
| Cable Reflection Control | Slew-rate-limited driver intended to reduce reflections | — |
| EMI Control | Slew-rate-limited driver intended to reduce EMI | — |
| Application Topology | RS-422 point-to-point and RS-485 multidrop | — |
| Differential Signal | Balanced line signaling | — |
| Logic Interface | Digital logic-level driver and receiver | — |
| Manufacturer Product Status | Production | — |
| Manufacturer Data Sheet Revision | Rev. 2 | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| آپریٹنگ درجہ حرارت | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| ESD Rating | [DATA_NEEDED: ESD rating] | — |
| Typical Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Isolation | [DATA_NEEDED: isolation rating] | — |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Interface Standard | — | True RS-485/RS-422 |
| Slew-Rate Limiting | — | Yes |
| Transceiver Configuration | — | 1/1 full transceiver |
| Operating Voltage | — | [DATA_NEEDED: operating voltage range] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Common-Mode Voltage | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Shutdown Control | — | [DATA_NEEDED: shutdown or enable control] |
| AEC-Q100 Qualification | — | unknown |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |