NE5534DR vs NE5534ADG موازنہ
تفصیلی ساتھ ساتھ موازنہ از NE5534DR بذریعہ Texas Instruments اور NE5534ADG بذریعہ onsemi. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | NE5534DR | NE5534ADG |
|---|---|---|
| برانڈ | Texas Instruments | onsemi |
| زمرہ | Amplifier ICs | Amplifier ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | Single low-noise operational amplifier | Single low-noise operational amplifier |
| Manufacturer | Texas Instruments | — |
| Number of Circuits | 1 | — |
| پیکیج | 8-SOIC | 8-SOIC, 0.154 inch (3.90 mm) width |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface mount |
| Total Supply Voltage | 10 V to 30 V | — |
| Equivalent Input Noise Voltage | 3.5 nV/Hz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| DC Voltage Gain | 100 dB typical | — |
| Slew Rate | 13 V/us typical | 13 V/us |
| Open-Loop Voltage Gain | 100 V/mV typical | — |
| Supply Configuration | ±5 V to ±15 V | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical at ±18 V | — |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current Capability | [DATA_NEEDED: output current capability] | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of Amplifiers | — | 1 circuit |
| Supply Voltage Range | — | 3 V to 20 V |
| Gain-Bandwidth Product | — | 10 MHz |
| Amplifier Type | — | General purpose |
| Packaging | — | Tube |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Voltage Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |