A3P250-PQ208I - 250K Gate FPGA, 151 I/O | Microchip
MPN: A3P250-PQ208I ✓ فعالA3P250-PQ208I جائزہ
A field-programmable gate array is a programmable digital logic device within the broader FPGA and semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA can be configured after manufacture for logic, control, data acquisition, communications, or embedded processing functions. The ProASIC3 family combines this in-system reprogrammability with deterministic FPGA performance, nonvolatile configuration storage, and designs suited to compact embedded systems.
The A3P250-PQ208I provides 250K equivalent logic gates, 151 I/O, and a 231 MHz maximum frequency. Its 130 nm fabrication process supports integration of logic cells, configurable memory, user I/O, clock-management resources, and embedded multipliers within one device. The 208-pin PQFP package also provides a large number of external connections, which is valuable for designs requiring substantial parallel data movement or multiple peripheral interfaces.
ProASIC3 devices support reprogramming, which allows one physical board design to serve multiple firmware configurations or field updates. This is useful when product requirements evolve during development or when a deployed controller must be updated without replacing the hardware. Designers should still validate configuration storage, startup behavior, clocking, and I/O standards against their system requirements before production release.
Typical uses include industrial control, data acquisition, communications gateways, embedded instrumentation, and general-purpose digital signal processing. The large 151-I/O count can simplify connections to sensors, converters, memory devices, display controllers, and communication transceivers. For designs operating near the device's upper frequency, printed-circuit-board signal integrity, clock routing, output loading, and power-supply integrity require careful attention.
The primary design consideration is package and pin compatibility during migration. Microchip's ProASIC3 migration documentation identifies pin compatibility as a central issue when moving between devices of different logic densities, so engineers should verify every power, ground, configuration, clock, and user-I/O connection rather than assuming that a lower-density part is interchangeable.
This product overview combines the manufacturer family information with distributor package and ordering records, supported replacement candidates, and engineering-focused migration guidance. It also distinguishes verified device attributes from parameters that require confirmation from the manufacturer datasheet, helping teams plan a ProASIC3 design without relying on incomplete catalog summaries.
کے لیے ڈراپ اِن متبادل A3P250-PQ208I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں A3P250-PQ208I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Core Supply Voltage, Mounting Type, Device Type, Family.
A3P250-PQG208I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
A3P250-PQ208
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →A3P250-PQG208
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →A3P250-PQ208I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | ProASIC3 FPGA |
| Logic Capacity | 250,000 gates |
| Maximum Frequency | 231 MHz |
| User I/O Count | 151 I/O |
| Fabrication Process | 130 nm |
| Core Supply Voltage | 1.5 V |
| پیکیج | 208-pin PQFP |
| پن کی تعداد | 208 pins |
| Programmable Logic | 250K-gate ProASIC3 architecture |
| Configuration Support | In-system programmable |
A3P250-PQ208I 208-pin pqfp پن کنفیگریشن گائیڈ
A3P250-PQ208I (208-pin pqfp پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں A3P250-PQ208I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
A3P250-PQ208I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Systems, Data Acquisition Systems, Communications Gateways, Programmable Logic Instrumentation, Embedded Display and Control Panels, Aerospace Ground Support Equipment.
Industrial Control Systems
The A3P250-PQ208I fits industrial controllers that combine parallel digital I/O, sequencing, timing, and communication logic in one programmable device. Its 151 user I/O can connect limit switches, relay drivers, encoders, status indicators, and external data buses without requiring multiple large logic devices. The 250K-gate ProASIC3 architecture provides sufficient capacity for control state machines, event counters, alarm logic, and supervisory processing, while its 231 MHz maximum frequency supports demanding digital functions. Because the package exposes 208 pins, the design can also retain legacy parallel interfaces without extensive redesign. Engineers should use the manufacturer package pinout to separate clock and configuration signals from high-fanout outputs, and should account for grounding, decoupling, and signal-integrity requirements in industrial equipment.
تجویز کردہ
Data Acquisition Systems
The A3P250-PQ208I is suitable for data-acquisition front ends that must coordinate sampling control, data capture, buffering, and communication. Its 151 I/O provide substantial parallel connectivity for sensor interfaces, multiplexers, counters, converters, and host buses, while the 250K-gate fabric can implement acquisition state machines and protocol engines. The device's 231 MHz maximum frequency provides useful timing margin for parallel bus control and data organization. A practical implementation would use dedicated clock routing, constrained timing, and registered interfaces to reduce skew between sampling and conversion signals. Verify analog-interface isolation and voltage tolerances independently because the FPGA does not replace input protection. Board-level return paths and a quiet supply arrangement are especially important when the acquisition subsystem handles small signals or high-resolution converters.
تجویز کردہ
Communications Gateways
The A3P250-PQ208I can implement protocol conversion, framing, buffering, and supervisory logic for communications gateways. Its 151 I/O support parallel host interfaces, status and alarm signals, and external transceiver connections, while the programmable ProASIC3 fabric can accommodate multiple protocol engines or redundant control paths. At a maximum frequency of 231 MHz, the device is appropriate for deterministic packet handling, FIFO-based flow control, and interface bridging. Designers should partition clock domains carefully and use the manufacturer's timing constraints to avoid errors at the maximum operating rate. External transceivers still require their own line-impedance and ESD-control networks. Configuration should also preserve correct startup behavior if the gateway must recover autonomously after power restoration or a firmware update.
تجویز کردہ
Programmable Logic Instrumentation
The A3P250-PQ208I suits programmable test and measurement instruments that need extensive control I/O alongside reconfigurable digital logic. Engineers can use the 151 available I/O to coordinate instruments, trigger channels, route status signals, and implement timing sequences, while the 250K-gate fabric handles counters, sequencers, and interface adaptation. The 1.5 V core supply and 130 nm ProASIC3 implementation place the device in a conventional low-voltage FPGA class. For measurement accuracy, separate analog and digital return paths and avoid routing switching outputs directly beside sensitive inputs. Clock inputs, bank supply requirements, and I/O voltage limits must be checked against the selected board architecture. In-system programmability is valuable for field upgrades, provided the design includes a reliable update mechanism and verifies the newly programmed configuration after restart.
تجویز کردہ
Embedded Display and Control Panels
The A3P250-PQ208I can coordinate displays, keypad inputs, indicator drivers, and machine controls in a compact embedded panel. Its high I/O count allows the FPGA to bridge display interfaces, touch or membrane-key inputs, alarm outputs, and communications to a supervisory processor. The programmable architecture simplifies adaptation when panel layouts or control sequences change, while the 231 MHz maximum frequency supports timing-intensive display and refresh functions. In a mixed-signal enclosure, keep display and switching return currents away from sensitive control nodes, and use controlled series resistance or proper source termination where signal reflections are possible. Validate every display and peripheral voltage against the device's I/O constraints. Configuration storage should be protected against accidental programming, and the startup sequence should ensure that outputs remain in a safe state until the intended logic is active.
تجویز کردہ
Aerospace Ground Support Equipment
The A3P250-PQ208I can be evaluated for ground-support and test equipment where deterministic programmable control and abundant parallel I/O are useful. The device can implement sequencers, redundant monitoring, communication adapters, and equipment-interface logic in a 208-pin PQFP package. The 250K-gate capacity allows substantial control logic without splitting small functions across multiple FPGAs, while the 231 MHz maximum operating frequency supports demanding timing. Ground-support equipment may have wide environmental exposure and strict functional-safety expectations, so the exact temperature grade, radiation considerations, and qualification requirements must be evaluated independently for each deployment. Use the manufacturer ordering guide to verify the I suffix and do not infer aerospace qualification solely from the family name. For safety-related functions, include watchdog behavior, fail-safe output states, configuration checks, and documented verification procedures.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا A3P250-PQ208I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | A3P250-PQG208I | A3P250-PQ208 | A3P250-PQG208 |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Pricing | Request a Quote | Request a Quote | Request a Quote | Request a Quote |
اہم امتیازی خصوصیات
- Directly documented 208-pin ProASIC3 replacement path (بمقابلہA3P250-PQG208I)
- Large I/O count in the original 208-pin footprint (بمقابلہA3P250-PQ208)
- Documented equivalent primary performance profile (بمقابلہA3P250-PQG208)
ڈیزائن نوٹس
Treat the 208-pin PQFP as a high-pin-count fanout device and preserve continuous ground references beneath and between rows of leads. Route clock inputs away from high-current switching outputs, maintain the manufacturer-recommended supply decoupling close to the relevant pins, and route configuration signals away from noisy analog sections. Because ProASIC3 migrations can depend on pin compatibility, maintain a package-level pin map and verify every power, configuration, clock, and user-I/O connection before substituting another logic-density device.
Use the manufacturer's timing constraints and board-design guidance for any design operating near the 231 MHz maximum device frequency. Pay particular attention to clock skew, I/O loading, external memory interfaces, and simultaneous-switching output effects on the 1.5 V core supply. Registered I/O stages, series damping on externally clocked nets, and a low-impedance return path can reduce timing failures and signal-integrity problems. Validate the final layout with post-route timing analysis rather than relying only on nominal device frequency.
Do not assume that an A3P250 suffix with the same package is automatically interchangeable. Microchip's migration document identifies pin compatibility as a key issue when changing ProASIC3 logic densities, and ordering suffixes can encode speed, temperature, or qualification differences. Before replacing A3P250-PQ208I, compare supply voltage, absolute maximum ratings, operating temperature, I/O standards, configuration pins, timing limits, and lifecycle status against the manufacturer ordering guide. Preserve the original schematic and PCB constraints until functional and timing checks pass.
تعمیل کی معلومات
Compliance status requires confirmation from the manufacturer product page, material declarations, or order-specific documentation.