A3P250L-FG144 - 250K Low-Power FPGA | Microchip | Industrial Control
MPN: A3P250L-FG144 ✗ اختتامِ زندگیA3P250L-FG144 جائزہ
A field-programmable gate array is a semiconductor whose digital logic is configured after fabrication. FPGAs occupy the hierarchy between fixed-function logic ICs and programmable processors. The ProASIC3L family combines flash-based, nonvolatile configuration with customizable logic and I/O. This makes it useful when a product needs hardware updates, multiple interface variations, or logic consolidation without changing the printed circuit board.
The defining feature of the A3P250L-FG144 is its low-power ProASIC3L implementation. It provides the same 250K-class logic density and 97-I/O interface count as the ProASIC3 family while targeting lower static and dynamic power characteristics. The device combines 36,864 logic elements with a 144-LBGA package, allowing dense control logic, peripheral interfaces, and signal processing blocks to be integrated into one component.
ProASIC3 devices support reprogramming and are commonly used where field updates, configuration storage, and design flexibility are important. Compared with a mask-programmed ASIC, an FPGA shortens the path between design revisions and production because the same physical package can support different logic configurations. Compared with a processor-based implementation, dedicated FPGA logic can execute interface, decode, filtering, and control tasks concurrently with predictable hardware timing.
Typical applications include industrial automation, communications equipment, test and measurement systems, embedded control, interface bridging, and signal processing. The 97 available I/O make the part suitable for systems combining multiple digital buses, serial links, control outputs, and status inputs. In each case, the design must provide the required configuration memory, clocking, decoupling, programming access, and a power architecture appropriate for the selected speed and temperature grade.
A key design consideration is that the L designation identifies a low-power family variant, while ordering suffixes identify speed, temperature, and packaging options. PCB and system designers should therefore treat the complete MPN as the ordering identity rather than selecting only by the base ProASIC3 family name. Validate the selected ordering code against the Microchip datasheet, pin table, footprint, and power requirements before releasing the PCB.
This page consolidates the verified device identity, package and I/O characteristics, drop-in alternatives that can be substantiated, comparison fields, and application-oriented design guidance. It also distinguishes documented facts from parameters that must be confirmed directly in the manufacturer datasheet, helping engineers shorten component selection and PCB review.
کے لیے ڈراپ اِن متبادل A3P250L-FG144 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
A3P250L-1FG144
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
A3P250L-FG144 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | ProASIC3L field-programmable gate array (FPGA) |
| Logic Density | 250K class |
| Logic Elements | 36,864 |
| I/O Count | 97 I/O |
| پیکیج | 144-LBGA |
| ماؤنٹنگ ٹائپ | Surface mount |
| Configuration Memory | Flash-based nonvolatile configuration |
| FPGA Family | ProASIC3L |
| Vendor | Microchip Technology |
| Programmability | Field-programmable and reconfigurable |
| Number of Logic Elements | 36,864 elements |
| RoHS اسٹیٹس | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
A3P250L-FG144 144-lbga پن کنفیگریشن گائیڈ
A3P250L-FG144 (144-lbga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں A3P250L-FG144.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
A3P250L-FG144 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation Controllers, Communications Interface Equipment, Test and Measurement Systems, Embedded Interface Bridging, Programmable Signal Conditioning, Security and Access-Control Equipment.
Industrial Automation Controllers
The A3P250L-FG144 fits industrial automation controllers that must combine parallel machine-control I/O, bus decoding, timing logic, and communication interfaces in one programmable device. Its 97 I/O provide substantial board-level connectivity, while 36,864 logic elements can implement control planes and peripheral bridges concurrently. The ProASIC3L low-power family position is useful when static and dynamic power are important, but the exact speed and temperature grade must satisfy the machine environment. Designers should partition deterministic logic carefully, verify I/O standards against the package pin table, and retain a hardware watchdog and safe-state strategy for actuator outputs.
تجویز کردہ
Communications Interface Equipment
The A3P250L-FG144 can implement protocol conversion, framing, filtering, and supervisory logic around communications interfaces. With 97 I/O and 36,864 logic elements, the FPGA can combine parallel interfaces and control functions without relying on a separate fixed-function logic device. For telecom, industrial-network, or test equipment, the low-power ProASIC3L family can help control consumption when the logic does not require continuous high activity. Design validation should cover clock-domain crossings, input tolerance, output timing, and I/O voltage selection, because those details are governed by the exact suffix and package configuration.
تجویز کردہ
Test and Measurement Systems
The A3P250L-FG144 is suitable for programmable test and measurement logic that coordinates acquisition, trigger, routing, and result-handling functions. Its 36,864 logic elements provide parallel capacity for counters, state machines, pattern generation, and data-format conversion, while 97 I/O can support instrument-facing signals and control registers. The flash-based ProASIC3 architecture also permits configuration updates when product variants share the same hardware. Engineers should establish acquisition-clock budgets, control register behavior, and deterministic I/O timing, then verify that the selected operating grade supports the ambient temperature and measurement accuracy requirements.
تجویز کردہ
Embedded Interface Bridging
The A3P250L-FG144 is appropriate for embedded systems that need a bridge between legacy parallel buses, serial protocols, and supervisory control logic. The 97 available I/O allow several buses and discrete control signals to coexist, while 36,864 logic elements can implement buffering, arbitration, endian conversion, and protocol state machines. The low-power ProASIC3L family is relevant to compact equipment where a processor-only implementation would leave idle or low-duty-cycle logic active. The hardware design should include pull-up or pull-down strategies for unused pins, buffered clock distribution, and a configuration strategy that prevents unintended outputs during startup.
تجویز کردہ
Programmable Signal Conditioning
The A3P250L-FG144 can implement digital signal conditioning, filtering, sequencing, and data capture around sensors and analog front ends. Its 36,864 logic elements provide parallel capacity for digital filters and state-machine-based sequencing, while 97 I/O simplify connections to converters, sensors, and calibration interfaces. Because the device is a programmable logic platform rather than a dedicated DSP, designers should assess whether a hard multiplier, block RAM, or clocking resource meets the workload and whether power remains acceptable during acquisition bursts. Signal-integrity work should include controlled impedance routing, termination, and dedicated clock paths.
تجویز کردہ
Security and Access-Control Equipment
The A3P250L-FG144 can support access-control and security equipment that requires coordinated credential parsing, event logging, alarm logic, and external-device control. Its 97 I/O permit integration of readers, status indicators, relays, and communication channels, while 36,864 logic elements enable parallel protocol handling and control state machines. The flash-based ProASIC3 configuration supports field-reprogrammable product variants, but security-critical implementations should authenticate configuration files and protect update mechanisms outside the FPGA logic. Review the exact operating-temperature and lifecycle requirements before deployment because this is a legacy family.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا A3P250L-FG144 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | A3P250L-1FG144 |
|---|---|---|
| Package | 144-LBGA | 144-LBGA |
| Brand | Microchip Technology | Microchip Technology |
| FPGA Family | ProASIC3L | ProASIC3L |
| Logic Elements | 36,864 | 36,864 |
| I/O Count | 97 I/O | 97 I/O |
| Logic Density Class | 250K | 250K |
| Configuration Memory | Flash-based nonvolatile | Flash-based nonvolatile |
| Mounting Type | Surface mount | Surface mount |
| Ordering-Suffix Difference | FG144 | 1FG144; speed and temperature grade must be confirmed |
| RoHS Status | unknown | unknown |
اہم امتیازی خصوصیات
- Low-power member of the 250K ProASIC3 family (بمقابلہA3P250-FG144)
- High board-level connectivity in a compact package (بمقابلہA3P250L-1FG144)
- Nonvolatile field reconfiguration (بمقابلہA3P250L-1FG144)
ڈیزائن نوٹس
Use the official 144-LBGA land pattern and pin table when routing the A3P250L-FG144; do not infer ball assignments from the package name alone. Place all required power and ground connections directly to their associated balls, provide local decoupling at the device, and keep configuration, clock, and high-fanout nets away from sensitive inputs. Because the verified records do not enumerate the 144 balls, schematic and layout release must include a line-by-line comparison with the manufacturer package drawing.
Determine the complete supply topology from the manufacturer datasheet before assigning power pins or setting regulator output voltages. The ProASIC3L designation identifies the low-power family, but it does not establish core voltage, I/O voltage, tolerance, sequencing, or current limits. Validate every power rail against the exact A3P250L-FG144 ordering code and worst-case activity level. This avoids connecting rails that may appear interchangeable in generic ProASIC3 documentation but have different limits.
Do not treat the A3P250L-1FG144 suffix difference as cosmetic. The additional -1 ordering code can identify a different speed or temperature grade, so replacing A3P250L-FG144 without checking those limits may reduce timing margin or invalidate environmental qualification. Likewise, A3P250-FGG144I is not a direct substitute because its FGG package is physically different. Preserve the exact package and confirm timing, temperature, configuration, and qualification requirements.
Plan clock distribution, configuration access, and high-speed I/O as separate layout concerns. Use short, continuous clock routes with appropriately placed decoupling, avoid routing clocks over unrelated ball breaks, and provide clean references for I/O return paths. Although the 97-I/O count supports many external signals, the 144-LBGA package also carries power, ground, configuration, clock, and dedicated pins. Signal assignment must therefore begin from the complete pin-description table rather than from the 97 user-I/O figure alone.
تعمیل کی معلومات
No exact-device RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were established for A3P250L-FG144. Request the manufacturer or supplier compliance documentation for the exact ordering code and lot.