Analog Devices

AD6600AST - 11-Bit, 20 MSPS Dual-Channel ADC | Analog Devices

MPN: AD6600AST ✓ فعال
5 V Vdss 44-LQFP, 10 mm x 10 mm Package 250 MHz Speed
MOQ: 1 |

AD6600AST جائزہ

The Analog Devices AD6600AST is an 11-bit, 20 MSPS dual-channel mixed-signal receiver ADC in a 44-LQFP package. It directly samples analog input frequencies up to 250 MHz and provides two receive channels, each with a 1 GHz input amplifier and 30 dB of automatic gain-ranging circuitry. The device supports 5 V analog operation and CMOS-compatible digital outputs for interfacing with 3.3 V or 5 V processing devices.

A mixed-signal receiver ADC combines high-frequency analog sampling with parallel digital output. In the broader semiconductor hierarchy, the AD6600 belongs to the analog-to-digital converter family, integrates receiver functions into one device, and ultimately serves as a signal-chain interface for communications equipment. Its dual-channel architecture is designed for antenna-diversity receivers, where two antenna paths are sampled coherently for comparison and selection.

Key features include 11-bit resolution, a 20 MSPS conversion rate, two analog inputs, a maximum 250 MHz analog input frequency, and 1 GHz input amplifiers. Each channel includes 30 dB of automatic gain ranging, which reduces the external signal-chain burden when received signal strength changes. Two's-complement CMOS output data can connect directly to 3.3 V or 5 V digital processing chips.

The AD6600 combines an 11-bit pipeline ADC with receiver-oriented analog front-end functions in a single 44-LQFP package. Its 1 GHz input amplifiers provide wideband signal conditioning ahead of digitization, while the automatic gain-ranging block covers a 30 dB input range. These characteristics suit RF and IF sampling architectures where the received carrier must be captured directly rather than downconverted through additional mixer stages.

Typical uses include dual-antenna diversity receivers, wireless infrastructure, communications test equipment, instrumentation, and other wideband sampling systems. Because the two channels provide separate gain-ranging paths, the device can support received-signal-strength measurement and diversity combining in one conversion system.

A critical design consideration is the relationship between the 20 MSPS conversion rate and the 250 MHz maximum analog input frequency. PCB signal integrity, impedance control, grounding, and decoupling are essential because wideband input signals amplify supply and layout noise as well as the desired carrier. Use the pin-description table and application guidance in the manufacturer datasheet when assigning tracks, decoupling capacitors, and digital output routing.

This page consolidates the verified manufacturer and distributor product information, identifies same-footprint replacement options, and adds application, comparison, and layout guidance that helps shorten evaluation time for wideband receiver-ADC designs.

کے لیے ڈراپ اِن متبادل AD6600AST — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

AD6600ASTZ

✅ ڈراپ-اِن
📦 44-LQFP (10 mm x 10 mm)
Same 44-LQFP footprint, 11-bit resolution, 20 MSPS rate, and consistent terminal arrangement; ordering-code finish differs by 0% in resolution and sampling rate

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD6600AST زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

ریزولوشن 11 bit
Maximum Sampling Rate 20 MSPS
Analog Input Channels 2 channels
Maximum Analog Input Frequency 250 MHz
Input Amplifier Bandwidth 1 GHz per channel
Automatic Gain Range 30 dB per channel
Architecture 1-pipelined-stage mixed-signal receiver ADC
Analog Supply Voltage 5 V
Digital Output Logic 3.3 V or 5 V CMOS-compatible
Digital Output Format Two's complement
آپریٹنگ درجہ حرارت رینج -40°C to +85°C
پیکیج 44-LQFP, 10 mm x 10 mm
Package Type Low-profile flatpack, tray shipping option
ماؤنٹنگ ٹائپ Surface mount
Primary Application Dual-antenna diversity receiver signal chain

AD6600AST low-profile flatpack, tray shipping option پن کنفیگریشن گائیڈ

AD6600AST (low-profile flatpack, tray shipping option پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

AD6600AST کے لیے low-profile flatpack, tray shipping option پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AD6600AST.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

AD6600AST کے لیے موزوں ہے 6 ایپلیکیشنs: Dual-Antenna Diversity Receiver, RF and IF Signal Sampling, Communications Test Equipment, Wireless Infrastructure Receiver, Spectrum and Waveform Analysis, Instrumentation and Industrial Monitoring.

🌐

Dual-Antenna Diversity Receiver

The AD6600AST fits diversity receivers because its two analog input channels can sample separate antenna paths while each channel provides a 1 GHz input amplifier and 30 dB of automatic gain ranging. The 20 MSPS converter rate supports direct capture of received signals up to 250 MHz, reducing the need for additional downconversion stages. The two's-complement CMOS output can feed a 3.3 V or 5 V processor for channel comparison, switch control, and diversity combining. Validate antenna-to-pin isolation and gain-calibration behavior on the assembled board.

🌐

RF and IF Signal Sampling

Use the AD6600AST when a communications design must sample RF or IF carriers directly at frequencies as high as 250 MHz. The 1 GHz input amplifiers provide wideband analog drive, while the 11-bit, 20 MSPS pipeline architecture converts each channel to parallel digital data for a DSP or FPGA. The 30 dB automatic gain range accommodates received-signal-level variation, but board design must control return loss, crosstalk, and impedance discontinuities between the antenna path and ADC inputs.

🔧

Communications Test Equipment

The AD6600AST is appropriate for communications test equipment that needs two synchronized wideband sampling paths rather than a single slow-resolution measurement channel. Its 20 MSPS rate, 250 MHz maximum analog input frequency, and 11-bit output resolution support carrier analysis, gain measurement, and modulation inspection. The two independent gain-ranging paths are especially useful when comparing two inputs under different signal levels. Use calibrated clocks and short, impedance-controlled analog routing to preserve measurement accuracy.

🏭

Wireless Infrastructure Receiver

Infrastructure receivers can use the AD6600AST to digitize two received channels directly and perform gain, signal-strength, or diversity decisions in digital hardware. Direct sampling up to 250 MHz removes some mixer-chain complexity, while 30 dB of automatic gain ranging helps maintain usable converter codes as signal strength changes. Because infrastructure systems operate in fixed installations, thermal stability and reference accuracy are critical; verify the analog supply arrangement and provide clean, low-impedance grounding beneath the wideband input stage.

📡

Spectrum and Waveform Analysis

The AD6600AST can serve as the front end of a dual-channel spectrum or waveform analyzer when 11-bit resolution and 20 MSPS sampling are sufficient for the measurement bandwidth. Two inputs permit comparative measurements, monitoring of a signal against a reference, or a simplified quadrature arrangement. The 1 GHz amplifiers preserve wideband amplitude information ahead of conversion, while 30 dB of automatic gain ranging expands the usable input window. Account for aliasing, quantization, and the 250 MHz input limit in the system acquisition plan.

🏭

Instrumentation and Industrial Monitoring

The AD6600AST is suitable for instrumentation that must observe two high-frequency analog channels and process the samples digitally. Its -40°C to +85°C operating range supports industrial environments, and the dual-channel structure can monitor a subject and reference simultaneously. The 20 MSPS rate supports analysis of higher-frequency effects than many general-purpose low-speed ADCs, while automatic gain ranging helps maintain useful code utilization. Choose appropriate input attenuation and protection ahead of the 1 GHz amplifiers to avoid overload damage.

تجویز کردہ پروڈکٹس کا خلاصہ

AD6600ASTZ Same-footprint AD6600 ordering variant استعمال ہوتا ہے: Dual-Antenna Diversity Receiver, RF and IF Signal Sampling, Communications Test Equipment, Wireless Infrastructure Receiver, Spectrum and Waveform Analysis, Instrumentation and Industrial Monitoring
What are the key specifications of AD6600AST that engineers should know?
The AD6600AST is an 11-bit, 20 MSPS dual-channel mixed-signal receiver ADC with analog input bandwidth up to 250 MHz. Each channel includes a 1 GHz input amplifier and 30 dB of automatic gain-ranging circuitry. The device operates from a 5 V analog supply, produces two's-complement CMOS-compatible outputs for 3.3 V or 5 V digital processors, and is packaged in a 44-LQFP package. According to the Analog Devices AD6600 product page and data sheet, the dual input arrangement supports antenna-diversity receiver designs.
What is the difference between AD6600AST and AD6600ASTZ?
The AD6600AST and AD6600ASTZ are both Analog Devices 11-bit, 44-LQFP AD6600 variants with consistent performance and terminal arrangements, and cross-reference listings describe the ASTZ as a complete replacement for the AST. The distinguishing ordering detail is the terminal-finish or packaging code, so engineers should confirm the lead-finish requirement and the exact orderable MPN against their assembly process before substitution. The AD6600AST is the tray designation, while AD6600AST-REEL is a separate reel-packed ordering code.
What is the best drop-in replacement for AD6600AST?
The AD6600ASTZ is the closest documented drop-in replacement for the AD6600AST because it retains the same 44-LQFP footprint, 11-bit resolution, 20 MSPS sampling rate, and consistent terminal and performance characteristics. Cross-reference information states that replacing the AST with the ASTZ does not require circuit modification. Confirm ordering codes, temperature grade, and lead-finish requirements against the manufacturer data sheet before approving the substitution.
Can AD6600ASTZ replace AD6600AST without PCB changes?
Yes, the AD6600ASTZ can replace the AD6600AST without PCB changes according to the documented cross-reference comparison, which reports consistent terminals, packages, functional characteristics, and main performance parameters. Both use the 44-LQFP package and 11-bit, 20 MSPS receiver-ADC configuration. The same-footprint relationship does not by itself resolve orderable-code or material-finish requirements, so review the ordering guide before releasing a production BOM.
Where can I download the AD6600AST datasheet PDF?
The official AD6600 datasheet and product documentation are available from the Analog Devices AD6600 product page at https://www.analog.com/en/products/ad6600.html. The page provides the manufacturer data sheet and supporting technical resources for the dual-channel mixed-signal receiver. Use the manufacturer copy for pin assignments, electrical characteristics, application-circuit details, and package drawings; distributor-hosted PDF mirrors are secondary copies that may use different document revisions.
Where is the AD6600AST pinout located?
The AD6600AST pinout is presented in the pin-description table and package drawings contained in the Analog Devices AD6600 data sheet linked from the AD6600 product page. The device uses a 44-LQFP package, and its numbering includes analog inputs, clocking, control, power, ground, and parallel digital outputs. Because the exact 44-LQFP footprint is not held in the package-diagram library, this page does not reproduce a generated pin diagram; use the manufacturer drawing for board routing and assembly.
What is the operating temperature range of AD6600AST?
The AD6600AST operates from -40°C to +85°C. This industrial temperature range supports laboratory, industrial, and communications equipment where the receiver front end may operate outside consumer-temperature conditions. The Analog Devices AD6600 documentation should be checked for any temperature-dependent limits on gain-ranging performance, clocking, reference accuracy, and digital output timing.
What is the operating voltage of AD6600AST?
The AD6600AST uses a 5 V analog supply, and its two's-complement digital outputs are CMOS-compatible with 3.3 V or 5 V processing chips. This combination allows the converter to interface with both 5 V and 3.3 V digital hardware while retaining a 5 V analog domain. Confirm supply tolerances, analog and digital sequencing requirements, and decoupling values in the manufacturer data sheet before finalizing the power architecture.
How does automatic gain ranging help in an AD6600AST receiver design?
The AD6600AST provides 30 dB of automatic gain-ranging circuitry on each of its two input channels. This range allows the receiver to accommodate a 30 dB change in received signal strength without relying on the same external attenuator or amplifier gain for both antenna paths. The result is a more compact RF and IF signal chain, although gain calibration, attack behavior, and adjacent-signal performance still require system-level verification.
Where to buy AD6600AST online?
Use the Request a Quote form on this page to request current AD6600AST availability, volume pricing, and order processing for the exact 44-LQFP tray-packed MPN. The form is the appropriate channel for confirming stock status, scheduled deliveries, and lot-level sourcing. Because this is a mixed-signal receiver ADC with a specific package code, include the AD6600AST ordering information in the request to avoid ambiguity with the AD6600ASTZ or reel-packed variants.
What is the price of AD6600AST?
Current AD6600AST pricing is handled through the Request a Quote form on this page, which supports quantity-specific sourcing and schedule confirmation for the exact MPN. Pricing for this mixed-signal receiver ADC depends on order quantity, package variant, delivery schedule, and market conditions. Submit the requested quantity and target date with the quote request to receive a current commercial response.
What is the lead time for AD6600AST?
Request the current AD6600AST lead time through the Request a Quote form on this page, including your required quantity, target ship date, and acceptable package form. Lead time for this mixed-signal receiver ADC depends on production scheduling, available inventory, and the exact ordering code. The request can also confirm whether the AD6600AST or AD6600ASTZ ordering route best matches your assembly and sourcing plan.
Is AD6600AST in stock?
Current AD6600AST stock status should be confirmed through the Request a Quote form on this page. Provide the quantity, tray packaging requirement, and delivery window so the sourcing team can check the exact ordering code. The AD6600ASTZ is a related 44-LQFP option, but it should not be treated as an interchangeable stock answer without confirming its orderable status and assembly requirements.
When should I choose AD6600AST over AD6600ASTZ?
Choose the AD6600AST when your bill of materials specifically requires the tray-shipping orderable code and its documented finish or terminal treatment. Choose the AD6600ASTZ when the supply chain or assembly process supports that ordering variant, since cross-reference information describes it as a complete, unmodified replacement with the same package and main performance parameters. The decision is primarily an ordering, availability, and finish-control issue rather than an architecture change.
Is AD6600AST suitable for a dual-antenna diversity receiver?
Yes, the AD6600AST is suitable for a dual-antenna diversity receiver because it provides two independent analog input channels, each with a 1 GHz input amplifier and 30 dB of automatic gain-ranging circuitry. According to the Analog Devices AD6600 product page, the primary use of the dual analog input structure is sampling both antennas in a two-antenna diversity receiver. Its 20 MSPS conversion rate also supports direct sampling of received signals up to 250 MHz.
What is the best Analog Devices equivalent for AD6600AST?
The best documented Analog Devices equivalent for the AD6600AST is the AD6600ASTZ because it retains the same 44-LQFP package, 11-bit resolution, 20 MSPS operation, and consistent functional and terminal characteristics. The manufacturer family page and the cross-reference comparison identify this relationship as a complete replacement without circuit modification. Final approval should include review of orderable codes, temperature grade, and lead-finish requirements.
What can replace AD6600AST?
The AD6600ASTZ is the documented same-footprint part that can replace the AD6600AST without circuit modification, because both retain the 44-LQFP package and the same 11-bit, 20 MSPS receiver-ADC configuration. No cross-manufacturer drop-in replacement could be established from the available cross-reference information without risking pin, timing, or interface incompatibility. Use the AD6600ASTZ as the primary replacement candidate and verify ordering details with the manufacturer data sheet.

کے لیے انجینئرنگ ریفرنس ڈیٹا AD6600AST — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the AD6600AST when the AD6600 family architecture is required and the tray-shipping orderable code matches your bill of materials and assembly plan. Its two 20 MSPS, 11-bit channels, 1 GHz input amplifiers, and 30 dB automatic gain ranging are suited to antenna-diversity receivers and direct wideband signal sampling. The AD6600ASTZ is the preferred same-footprint alternative when its ordering code better fits procurement or assembly; cross-reference information reports consistent performance, terminals, and package, with no circuit modification required. For this device family, changing between orderable codes is lower risk than adopting an unrelated converter whose interface timing, input network, or digital data organization may differ. Review the manufacturer data sheet for lead finish, temperature grade, clocking requirements, reference details, and absolute maximum ratings before releasing either part into production.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ AD6600ASTZ
Brand Analog Devices Analog Devices
Package 44-LQFP (10 mm x 10 mm) 44-LQFP (10 mm x 10 mm)
Resolution 11 bit 11 bit
Maximum Sampling Rate 20 MSPS 20 MSPS
Analog Input Channels 2 channels 2 channels
Maximum Analog Input Frequency 250 MHz 250 MHz
Input Amplifier Bandwidth 1 GHz per channel 1 GHz per channel
Automatic Gain Range 30 dB per channel 30 dB per channel
Operating Temperature Range -40°C to +85°C -40°C to +85°C
Digital Output Compatibility Two's-complement CMOS, 3.3 V or 5 V Two's-complement CMOS, 3.3 V or 5 V

اہم امتیازی خصوصیات

  • Combines dual direct-sampling inputs with on-chip wideband gain ranging (بمقابلہAD6600ASTZ)
  • Targets antenna-diversity receiver architectures (بمقابلہAD6600ASTZ)
  • Supports direct connection to mixed digital voltage levels (بمقابلہAD6600ASTZ)

ڈیزائن نوٹس

Treat the two analog inputs as controlled-impedance RF paths. Keep the AD6600AST input routing short, avoid stubs and unnecessary vias, and maintain continuous reference-plane return paths under the 1 GHz input amplifiers. Place input protection, attenuation, and any external filtering directly ahead of the relevant pins rather than distributing them around the board. This minimizes insertion loss, reflections, and channel-to-channel crosstalk when sampling carriers as high as 250 MHz.

Separate analog and digital supply return paths as far as practical and follow the manufacturer decoupling table exactly. The AD6600AST uses a 5 V analog domain and supports 3.3 V or 5 V CMOS-compatible digital outputs. Place high-frequency bypass capacitors at the device pins rather than at the power-entry point, and keep the switching supply or digital return currents out of the analog reference area. Confirm power-up and power-down sequencing against the manufacturer recommendations.

Account for the interaction between the 20 MSPS conversion rate and the much higher 250 MHz analog input bandwidth. A narrow output bus carrying 11-bit parallel data at 20 MSPS requires matched-length routing and clean clock delivery; excessive skew or output-ringing can reduce effective code performance. Route clock and data as a controlled interface group, keep the digital return path continuous, and validate eye margin and timing with the actual processor or FPGA load.

Do not assume that the 30 dB automatic gain range replaces front-end protection. Very large or fast input transients can overload the 1 GHz amplifiers before gain-ranging action is effective. Use suitable attenuation, clamps, or limiting networks where antenna transients are possible. Also confirm that the clock, reference, and digital interface timing meet the requirements in the AD6600 data sheet rather than treating the 250 MHz input specification as a guaranteed full-scale accuracy figure.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The verified product information does not explicitly state the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations against the current Analog Devices product documentation and the applicable ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-18 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

AD6600AST datasheet AD6600AST pinout AD6600AST datasheet pdf AD6600AST equivalent AD6600AST replacement AD6600AST vs AD6600ASTZ AD6600AST price AD6600AST stock Analog Devices AD6600AST AD6600 44-LQFP ADC AD6600AST application circuit AD6600AST diversity receiver what is the sampling rate of AD6600AST AD6600AST 250 MHz ADC

متعلقہ اجزاء اور اصطلاحات

Analog Devices AD6600AST AD6600ASTZ AD6600 mixed-signal receiver chip analog-to-digital converter ADC pipeline ADC RF sampling IF sampling antenna diversity receiver automatic gain ranging 1 GHz input amplifier 30 dB gain range 250 MHz analog input 20 MSPS 11-bit resolution two's-complement CMOS 44-LQFP 10 mm x 10 mm surface mount parallel digital output analog-to-digital conversion received signal strength indicator
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں