Analog Devices

AD8004ANZ - Quad 3000 V/us Current Feedback Amplifier | Analog Devices

MPN: AD8004ANZ ✓ فعال
Single or dual supply Vdss 14-pin PDIP Package
MOQ: 1 |

AD8004ANZ جائزہ

The Analog Devices AD8004ANZ is a quad high-speed current-feedback operational amplifier with a slew rate of 3000 V/us, 35 mW power rating, and four amplifiers in a 14-pin PDIP package. Designed for single- or dual-supply operation, it is suited to video, instrumentation, RF, and large-amplitude pulse-processing circuits where rapid signal transitions and low power are important.

An operational amplifier is an active analog signal-conditioning device that uses negative feedback to amplify the difference between two input voltages. The AD8004 belongs to the current-feedback amplifier family within the broader hierarchy of operational amplifiers, analog ICs, and semiconductor signal-processing devices. Unlike a voltage-feedback amplifier, a current-feedback stage can maintain high slew rate across a wide range of gain settings, making it especially effective in video and pulse applications.

Four amplifiers are integrated into one package, allowing a complete multi-channel signal chain to occupy one 14-pin PDIP footprint. The 3000 V/us slew rate enables the device to reproduce large-amplitude edges without the severe bandwidth reduction commonly associated with voltage-feedback amplifiers at high gain. Its stated 35 mW power rating supports compact, low-power analog designs while retaining high-speed performance. Operation from a single or dual supply also permits different system architectures for positive-only and split-supply rails.

The current-feedback architecture is the central technical feature of the AD8004. It is particularly appropriate for video monitoring, broadcast signal conditioning, waveform generation, test equipment, and instrumentation where wide bandwidth, fast edge response, and multiple independent channels are needed. Because current-feedback amplifiers are sensitive to implementation details, feedback-resistor selection, source-impedance balance, and stable gain configuration must follow the manufacturer's recommended circuit practices.

Typical uses include four-channel video buffering, pulse generation, data-converter interface circuitry, RF and IF signal conditioning, and industrial measurement systems. In a video design, the amplifier can preserve edge sharpness across several channels while operating from the same supply as the surrounding analog circuitry. In instrumentation, four independent amplifiers can reduce component count while providing consistent device-level behavior.

A key design consideration is stability. Keep feedback networks short, minimize parasitic capacitance around high-impedance inputs, and follow the datasheet-recommended resistor values for the intended gain. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels require appropriate input and output termination. These practices help preserve the advertised 3000 V/us slew-rate capability and reduce ringing.

This page combines the manufacturer's device characteristics, sourcing details, replacement guidance, comparison parameters, and practical circuit-design notes in one engineering reference. It also identifies where application-specific details require confirmation against the current Analog Devices datasheet before schematic release or production procurement.

کے لیے ڈراپ اِن متبادل AD8004ANZ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں AD8004ANZ (یکساں فارم فیکٹر اور فٹ پرنٹ).

AD8004AN

✅ ڈراپ-اِن
📦 14-pin PDIP
Lead-free Z suffix is omitted; the amplifier function, 3000 V/us slew rate, 35 mW power rating, and 14-pin PDIP configuration remain the same

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD8004ANZ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Count 4 circuits
Architecture Current feedback
Slew Rate 3000 V/us
Power Rating 35 mW
Supply Configuration Single or dual supply
پیکیج 14-pin PDIP
ماؤنٹنگ ٹائپ Through-hole

AD8004ANZ 14-pin pdip پن کنفیگریشن گائیڈ

AD8004ANZ (14-pin pdip پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

AD8004ANZ کے لیے 14-pin pdip پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AD8004ANZ.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

AD8004ANZ کے لیے موزوں ہے 6 ایپلیکیشنs: Video Signal Conditioning, Large-Amplitude Pulse Generation, RF and IF Signal Conditioning, Test and Measurement Instrumentation, Industrial Sensor Interface, Data Converter Interface.

📺

Video Signal Conditioning

The AD8004ANZ fits multi-channel video conditioning because its four current-feedback amplifiers provide a 3000 V/us slew rate for preserving rapid transitions on large-amplitude signals. The amplifiers can be assigned to independent video paths, reducing the number of packages required when a system handles several composite or component-video lines. Current feedback is advantageous because it can retain strong edge response at higher gains than a conventional voltage-feedback stage. The designer should use the datasheet-recommended feedback resistors, account for the source and load impedances, and verify output swing and stability on the target video standard. A 14-pin PDIP footprint is appropriate for through-hole or mixed-technology boards where four channels are needed in a compact circuit area.

⚡

Large-Amplitude Pulse Generation

The AD8004ANZ is well suited to generating large-amplitude pulses because the 3000 V/us slew rate allows output edges to change rapidly while the 35 mW power rating supports a low-power implementation. Four channels can create complementary or sequential drive waveforms for timing, test, and communications circuits. Current-feedback behavior is especially relevant when pulse rise and fall times directly affect system timing. Feedback resistance and capacitance should be selected using the manufacturer guidance for the intended gain, and the output stage must remain within its specified load capability. Include output protection and controlled termination when driving long cables or back-terminated networks. The quad package reduces routing overhead by keeping related pulse outputs in one through-hole device.

🌐

RF and IF Signal Conditioning

The AD8004ANZ can condition RF or intermediate-frequency signals when the required signal amplitude and bandwidth remain within the device's operating limits. Its 3000 V/us slew rate is valuable for preserving envelope shape and reducing distortion in pulse-shaped carriers, while the current-feedback topology supports high-speed closed-loop layouts. Four channels allow parallel processing of I and Q paths or several receiver taps. The circuit should use controlled impedance routing, short feedback paths, and suitable source termination to avoid added phase error. Designers must verify gain-bandwidth, output swing, noise, and stability at the actual operating frequency rather than relying only on slew rate. The PDIP package also simplifies prototype assembly and rework in laboratory or industrial instrumentation systems.

🖥️

Test and Measurement Instrumentation

The quad AD8004ANZ is appropriate for test and measurement equipment that needs several high-speed, low-power signal paths. Four current-feedback amplifiers can buffer sensor outputs, drive comparator inputs, condition waveform channels, or amplify small signals before digitization without using four separate packages. The 3000 V/us slew rate improves reproduction of fast transitions, while the 35 mW rating helps limit heat in multi-channel instruments. For accurate measurements, the selected gain and feedback network must follow the datasheet because current-feedback bandwidth depends on circuit impedance. Place bypass capacitors close to the supply connections, keep sensitive input routes short, and check output loading to avoid gain errors or instability. The four-channel arrangement simplifies board partitioning and provides consistent placement of related analog circuitry.

🏭

Industrial Sensor Interface

The AD8004ANZ can serve as a fast output or intermediate amplification stage in an industrial sensor interface when sensor bandwidth exceeds the capability of a general-purpose amplifier. Its four channels support combinations of transducer buffering, gain stages, active filtering, and output drive within one package. The 3000 V/us slew rate is advantageous for sensors that produce sharp mechanical or electrical events, and the 35 mW rating supports compact multi-channel assemblies. Protection against industrial transients should be added ahead of the amplifier, while the input common-mode and output swing requirements must remain within the device's specified operating range. Use short, shielded routing for sensitive sensor nodes and verify stability with the actual source and load impedances. The through-hole package is particularly convenient for modular industrial control boards.

🧩

Data Converter Interface

The AD8004ANZ may be used in data-converter interface circuitry when the required slew rate, signal polarity, and loading are compatible with the amplifier's characteristics. Its four current-feedback channels can buffer multiple converter inputs, distribute an output, or condition complementary clock and data signals in a high-speed instrumentation system. The 3000 V/us slew rate helps preserve edge timing, while the low 35 mW power rating helps manage thermal load in systems with many conversion channels. Feedback values and source terminations should be selected for the target data rate and logic family rather than copied without impedance analysis. Confirm the converter's input capacitance, output settling requirements, and the amplifier's gain-bandwidth behavior in the design review. A quad package reduces the number of routing transitions around sensitive converter circuitry.

What is the AD8004ANZ and what are its main specifications?
The AD8004ANZ is a quad, low-power, high-speed current-feedback operational amplifier with a 3000 V/us slew rate, 35 mW power rating, and four circuits in a 14-pin PDIP package. According to the Analog Devices AD8004 datasheet, it operates from single or dual supplies and is designed for applications requiring large-amplitude pulse handling. The four integrated amplifiers let designers build parallel analog channels without using four separate packages.
What are the key specifications of AD8004ANZ that engineers should know?
The key AD8004ANZ specifications are four current-feedback amplifiers, a 3000 V/us slew rate, a 35 mW power rating, single- or dual-supply operation, and a 14-pin PDIP package. The Analog Devices datasheet identifies the device as a low-power, high-speed amplifier intended for large-amplitude pulses. These characteristics position it between general-purpose precision amplifiers and higher-power video-output stages.
Why does the AD8004 use current-feedback architecture?
The AD8004 uses current-feedback architecture to maintain a 3000 V/us slew rate across a broader range of gain settings than a typical voltage-feedback amplifier. Current feedback is especially useful for video edges, pulse generation, and instrumentation signals whose amplitude changes rapidly. The Analog Devices datasheet specifically identifies large-amplitude pulse handling as a principal use case for the family.
Is AD8004ANZ suitable for single-supply or dual-supply operation?
The AD8004ANZ supports both single- and dual-supply operation according to the Analog Devices AD8004 datasheet. Single-supply operation is useful where the signal stays above ground, while dual supplies support circuits that require bipolar signal swings around zero. The exact allowable supply voltages and input/output ranges must be confirmed in the manufacturer datasheet for the selected gain and load conditions.
AD8004ANZ vs AD8004AN: is the Z suffix a functional change?
The AD8004ANZ and AD8004AN represent the same quad current-feedback amplifier family and electrical function, with the Z designation identifying the lead-free ordering option. Both use the manufacturer's 14-pin PDIP configuration for this ordering family. The AD8004ANZ is the appropriate choice when the purchasing specification specifically requires the Z suffix and associated RoHS-compatible lead-free finish.
When should I choose AD8004ANZ over AD8004AN?
Choose AD8004ANZ when the approved bill of materials requires the lead-free Z ordering option, particularly for a RoHS-controlled production build. Choose AD8004AN when that ordering code is approved instead. The functional core is the same quad, 3000 V/us current-feedback amplifier, so the choice should follow mechanical compatibility, lifecycle status, procurement requirements, and exact manufacturer ordering documentation rather than speed or slew-rate differences.
Is AD8004ANZ suitable for video and pulse-processing applications?
The AD8004ANZ is suitable for video and pulse-processing applications because its 3000 V/us slew rate supports large-amplitude, rapidly changing signals. Four amplifiers in one package can provide matched channel functions for video routing, monitoring, or waveform conditioning. The Analog Devices datasheet identifies large-amplitude pulse handling as a core capability, while the exact bandwidth, gain, and load limits should guide the final application choice.
What can replace AD8004ANZ?
The closest identified replacement is AD8004AN, which retains the same quad current-feedback amplifier configuration and 14-pin PDIP package. A true drop-in substitute must also satisfy the target's supply, gain, bandwidth, output-load, noise, and stability requirements. No verified cross-brand part was established as pin-to-pin compatible with the AD8004ANZ, so an unverified amplifier should not be placed on the board without complete engineering review.
Is AD8004ANZ the same as AD8004AN for PCB replacement?
Yes, AD8004ANZ and AD8004AN are electrically equivalent members of the same 14-pin PDIP AD8004 family, with the primary ordering distinction being the Z lead-free suffix. An AD8004AN can replace AD8004ANZ when the approved component specification permits that substitution. Verify the exact order code, marking, package dimensions, and RoHS purchasing requirements before using it as a formal second source.
What is the best cross-brand equivalent for AD8004ANZ?
No cross-brand equivalent was verified as a true drop-in replacement for the AD8004ANZ. A valid substitute must match the 14-pin PDIP pinout and preserve the device's current-feedback behavior, 3000 V/us-class slew rate, low-power operation, supply range, stability characteristics, and output-drive capability. Similar bandwidth or slew-rate specifications alone are insufficient because feedback topology and compensation differences can alter stability and signal integrity.
Where can I download the AD8004ANZ datasheet PDF?
The official AD8004 product page at Analog Devices provides the manufacturer datasheet and supporting product information for the AD8004 family. Open the AD8004 page and select the datasheet download link for the current document revision. Use that manufacturer PDF for pin assignments, recommended feedback values, supply limits, electrical characteristics, and application-circuit details.
Where can I find the AD8004ANZ pinout and package drawing?
The AD8004ANZ pinout and mechanical package drawing are shown in the Analog Devices AD8004 datasheet. Use the pin-description table and package outline for the 14-pin PDIP configuration, paying attention to amplifier channel assignments, supply pins, and power-down or shutdown functions. Confirm the physical dimensions against the board layout before manufacturing.
Where to buy AD8004ANZ online?
Use the Request a Quote form on this page to request AD8004ANZ availability, current lead time, and order confirmation. The manufacturer identifies the AD8004ANZ as a 14-pin PDIP current-feedback amplifier, but production planning should use the exact order code and package suffix shown on this page. Supply the requested quantity, date code requirements, and target shipment location in the quote request.
What is the price of AD8004ANZ?
Use the Request a Quote form on this page for the current AD8004ANZ price and quantity structure. Pricing can vary with order quantity, date code, inventory status, and purchasing terms, so a static price may not reflect an executable quotation. Include the required order quantity, packaging information, target date code, and delivery location in the request to obtain a current commercial response.
What is the lead time and stock status for AD8004ANZ?
Current AD8004ANZ lead time and stock status should be confirmed through the Request a Quote form on this page. Include the required quantity, approved date-code range, delivery location, and target production date in the request. The AD8004ANZ is listed as a 14-pin PDIP quad current-feedback amplifier, but only a current quotation response should be used for schedule planning and manufacturing commitments.

کے لیے انجینئرنگ ریفرنس ڈیٹا AD8004ANZ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the AD8004ANZ when the design requires four current-feedback amplifiers in a 14-pin PDIP package and the approved ordering specification calls for the lead-free Z suffix. Its 3000 V/us slew rate is most useful for video, pulse, RF, IF, and high-speed instrumentation signals, while the 35 mW power rating supports low-power multi-channel systems. The AD8004AN is the closest identified alternative because it retains the same amplifier architecture, channel count, speed, power rating, and package, but its ordering code omits the Z suffix. Confirm that the alternate suffix is acceptable to purchasing and environmental-compliance requirements before substitution. No verified cross-brand drop-in equivalent was identified, so changing manufacturers should be treated as a redesign rather than a routine replacement. In either case, validate the feedback network, output loading, supply range, stability, and thermal performance using the manufacturer datasheet and the final board configuration.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ AD8004AN
Brand Analog Devices Analog Devices
Package 14-pin PDIP 14-pin PDIP
Amplifier Count 4 circuits 4 circuits
Architecture Current feedback Current feedback
Slew Rate 3000 V/us 3000 V/us
Power Rating 35 mW 35 mW
Supply Configuration Single or dual supply Single or dual supply
Lead-Free Ordering Suffix Z suffix present Z suffix absent

اہم امتیازی خصوصیات

  • Four high-speed channels in one through-hole package (بمقابلہAD8004AN)
  • Large-amplitude pulse response (بمقابلہAD8004AN)
  • Single- and dual-supply flexibility (بمقابلہAD8004AN)

ڈیزائن نوٹس

Current-feedback amplifiers require attention to feedback and source impedances. Do not assume that the bandwidth or stability behavior of a voltage-feedback amplifier carries over directly. Select the gain-setting and feedback resistors using the manufacturer's recommended values, keep the feedback path compact, and test the complete source and load combination. Changing input impedance, cable length, or output loading without rechecking stability can produce peaking or oscillation.

Place supply-decoupling capacitors close to the device's supply pins and use a low-inductance return path to the supply ground. Keep high-impedance input nodes and feedback traces short, and avoid routing them alongside fast switching or digital clock nets. For the 14-pin PDIP implementation, provide adequate lead spacing and avoid excessive thermal stress during soldering. Verify the physical package drawing against the PCB footprint before layout release.

Use the 3000 V/us slew rate as an edge-rate capability, not as a guarantee of usable closed-loop bandwidth at every gain. Evaluate the intended gain, source impedance, load capacitance, output amplitude, and feedback network together. At high speed, probe and fixture capacitance can materially alter the result, so use a suitably terminated test setup and inspect the output eye or pulse response for ringing before release.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The Z ordering suffix identifies the lead-free option, but formal RoHS, REACH, halogen-free, and conflict-minerals statements should be confirmed from the current manufacturer product documentation. AEC-Q100 qualification is not indicated for this general-purpose amplifier.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-18 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

AD8004ANZ datasheet AD8004ANZ datasheet pdf AD8004ANZ pinout AD8004ANZ 14 pin PDIP AD8004ANZ 3000 V/us AD8004ANZ current feedback amplifier AD8004ANZ equivalent AD8004ANZ replacement AD8004ANZ vs AD8004AN AD8004ANZ video amplifier AD8004ANZ pulse signal conditioning AD8004ANZ price AD8004ANZ stock Analog Devices AD8004ANZ AD8004ANZ application circuit

متعلقہ اجزاء اور اصطلاحات

Analog Devices AD8004ANZ AD8004AN AD8004 quad operational amplifier current-feedback amplifier current feedback voltage-feedback amplifier amplifier IC analog semiconductor signal conditioning 3000 V/us slew rate 35 mW power rating single-supply operation dual-supply operation 14-pin PDIP PDIP package family through-hole package video signal conditioning large-amplitude pulse processing RF signal conditioning IF signal conditioning test and measurement instrumentation data converter interface industrial sensor interface
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں