Analog Devices

AD8008ARZ - Dual 500MHz Current-Feedback Amplifier | Analog Devices

MPN: AD8008ARZ ✓ فعال
4 µA per amplifier Id 8-pin SOIC, 0.154 in (3.90 mm) width Package
MOQ: 1 |

AD8008ARZ جائزہ

The Analog Devices AD8008ARZ is a dual, high-speed current-feedback operational amplifier with 500 MHz bandwidth, 1000 V/µs slew rate, and low quiescent current of 4 µA per amplifier, housed in an 8-pin SOIC package. Its ultralow-distortion architecture supports high-fidelity signal processing where wide bandwidth, fast edge rates, and accurate large-signal behavior are required.

A current-feedback amplifier is a voltage-amplifier topology whose closed-loop bandwidth depends primarily on the feedback resistor rather than the closed-loop gain. This property makes the AD8008ARZ useful in applications requiring consistent bandwidth and slew performance across multiple gain settings. It belongs to the operational-amplifier hierarchy within analog ICs and broader signal-processing semiconductor systems.

Key characteristics include two independently usable amplifier channels, 500 MHz bandwidth, and 1000 V/µs slew rate. The dual device also maintains low quiescent current and low distortion, including AD8008 second-harmonic distortion of -77 dBc at 20 MHz. These characteristics make it suitable for video, communications, instrumentation, and general high-speed analog signal chains.

Analog Devices implements the AD8008 using its proprietary second-generation eXtra-Fast Complementary Bipolar, or XFCB, process. The bipolar process supports the device's high slew rate and low-distortion behavior, while the current-feedback architecture provides practical bandwidth control through external feedback components.

Typical uses include video buffering, cable-driver stages, high-speed instrumentation, communications interfaces, and low-noise analog signal conditioning. The dual configuration also allows a compact design to implement two gain stages or separate channels without using two single-amplifier packages.

Designers should calculate the external feedback resistor according to the manufacturer's recommended-value table and verify stability at the intended gain. Input and output impedance, capacitive loading, supply voltage, and trace-induced feedback can affect a high-speed current-feedback amplifier even when the schematic appears conventional.

This page combines manufacturer specifications, package and sourcing information, compatibility guidance, comparison data, and practical layout considerations to support component selection and board-level implementation of the AD8008ARZ.

کے لیے ڈراپ اِن متبادل AD8008ARZ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

AD8008AR

✅ ڈراپ-اِن
📦 8-SOIC (0.154 in, 3.90 mm width)
Uses the same dual current-feedback amplifier and 8-pin SOIC footprint; ordering-code finish status differs, with no quantified electrical difference established in the available product records

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD8008ARZ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Number of Circuits 2 circuits
Amplifier Type Current-feedback amplifier
Channel Count 2 channels
Gain-Bandwidth Product 500 MHz
Slew Rate 1000 V/µs
کوئیسینٹ کرنٹ 4 µA per amplifier
AD8008 Second-Harmonic Distortion -77 dBc at 20 MHz
Process Technology Second-generation XFCB complementary bipolar process
پیکیج 8-pin SOIC, 0.154 in (3.90 mm) width
ماؤنٹنگ ٹائپ Surface mount
Packaging Tube
RoHS Compliance ROHS3 compliant
REACH Status Unaffected
Moisture Sensitivity Level MSL 1 (unlimited floor life)

AD8008ARZ 8-pin soic, 0.154 in (3.90 mm) width پن کنفیگریشن گائیڈ

AD8008ARZ (8-pin soic, 0.154 in (3.90 mm) width پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

AD8008ARZ کے لیے 8-pin soic, 0.154 in (3.90 mm) width پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AD8008ARZ.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

AD8008ARZ کے لیے موزوں ہے 6 ایپلیکیشنs: High-Speed Video Signal Conditioning, Communications Receiver Analog Front End, Precision High-Speed Instrumentation, Audio and Low-Distortion Buffering, High-Speed Data Acquisition Front End, Portable Test and Measurement Equipment.

📺

High-Speed Video Signal Conditioning

The AD8008ARZ fits video buffers and active terminations that need rapid edge rates without the distortion commonly associated with slower general-purpose amplifiers. Its 500 MHz bandwidth and 1000 V/µs slew rate allow large or high-frequency video transitions to pass with limited timing degradation. The dual architecture can condition two related video channels in one 8-pin SOIC. Use the manufacturer's recommended feedback resistor for the required gain and place the device close to the source and load to minimize trace loss. The AD8008's -77 dBc second-harmonic distortion at 20 MHz helps preserve signal fidelity in demanding video paths.

🌐

Communications Receiver Analog Front End

The AD8008ARZ is appropriate for intermediate-frequency and baseband signal-conditioning stages in communications receivers where the 500 MHz bandwidth and 1000 V/µs slew rate support rapid waveform transitions. Current-feedback operation provides a practical way to tune bandwidth through the external feedback resistor, making the device useful across several gain requirements. Its low 4 µA quiescent current per amplifier also benefits portable or power-constrained equipment. Preserve high-frequency integrity with short signal paths, a stable reference plane, and careful decoupling of both supply pins.

🏭

Precision High-Speed Instrumentation

The AD8008ARZ can serve as the high-speed input stage of laboratory and industrial instrumentation when sensor outputs must be amplified with low distortion and short rise times. The dual-channel arrangement allows an instrument to amplify a measurement channel and a reference or auxiliary channel in a compact area. Its 500 MHz bandwidth and 1000 V/µs slew rate support fast sensor transients, while the current-feedback topology allows feedback resistance to be selected for the intended operating point. Use short input traces, guard routing around sensitive nodes, and an appropriate output termination to minimize high-frequency peaking.

🎧

Audio and Low-Distortion Buffering

Although the AD8008ARZ is designed for high-speed signal processing, its low-distortion bipolar architecture can also serve demanding audio or mixed-signal buffer stages. The dual channels provide flexibility for an input buffer and a driver function, and the low 4 µA quiescent current per amplifier suits low-power designs. Performance must still be evaluated at the intended audio bandwidth, load impedance, and gain because a high-speed amplifier is not automatically the optimal choice for every precision-audio requirement. Use the manufacturer's feedback recommendations and isolate sensitive audio paths from digital and switching circuitry.

🖥️

High-Speed Data Acquisition Front End

The AD8008ARZ is suitable for pre-amplifier stages preceding high-speed data acquisition equipment when the source produces fast transitions and the acquisition chain must retain low distortion. The 500 MHz bandwidth provides more bandwidth than many lower-frequency acquisition stages require, while the 1000 V/µs slew rate reduces edge-rate distortion. Two channels can handle complementary or sequential inputs, although the device is not itself an ADC and requires suitable downstream conversion hardware. Keep the amplifier close to the ADC input, minimize input capacitance, and validate settling performance at the selected gain and sampling rate.

🔧

Portable Test and Measurement Equipment

The AD8008ARZ supports compact test and measurement products that need fast input response while keeping amplifier quiescent consumption low. Its dual configuration reduces board area compared with two single-channel devices, and its 4 µA quiescent current per amplifier helps when the instrument operates from a limited power budget. The 500 MHz bandwidth and 1000 V/µs slew rate are particularly useful for probing pulse edges and wideband waveforms. Account for the SOIC package's thermal limits and use symmetric layout practices to minimize channel skew. Verify input/output impedance, loading, and probe capacitance before finalizing the front end.

تجویز کردہ پروڈکٹس کا خلاصہ

AD8008AR Same-family dual amplifier option استعمال ہوتا ہے: High-Speed Video Signal Conditioning, Communications Receiver Analog Front End, Precision High-Speed Instrumentation, Audio and Low-Distortion Buffering, High-Speed Data Acquisition Front End, Portable Test and Measurement Equipment AD8008ARZ Analog Devices استعمال ہوتا ہے: High-Speed Video Signal Conditioning, High-Speed Data Acquisition Front End AD8007ARZ Analog Devices استعمال ہوتا ہے: Communications Receiver Analog Front End, Precision High-Speed Instrumentation, Audio and Low-Distortion Buffering, Portable Test and Measurement Equipment
What is the AD8008ARZ?
The AD8008ARZ is a dual, high-speed current-feedback operational amplifier designed for low-distortion signal processing. According to the Analog Devices AD8007/AD8008 datasheet, it provides two amplifier channels, 500 MHz bandwidth, 1000 V/µs slew rate, and low 4 µA quiescent current per amplifier in an 8-pin SOIC package.
What are the key specifications of AD8008ARZ that engineers should know?
The AD8008ARZ combines a dual current-feedback architecture with 500 MHz bandwidth, 1000 V/µs slew rate, and 4 µA quiescent current per amplifier. The Analog Devices manufacturer datasheet also identifies an 8-pin SOIC package and ultralow distortion, including -77 dBc second-harmonic distortion at 20 MHz for the AD8008 dual configuration.
Where can I download the AD8008ARZ datasheet PDF?
The official AD8008ARZ datasheet PDF is available from Analog Devices at the AD8007_8008 data-sheet link on this page. It covers the shared AD8007 single-channel and AD8008 dual-channel family, including the current-feedback architecture, electrical characteristics, package information, and application guidance.
What is the bandwidth and slew rate of AD8008ARZ?
The AD8008ARZ has a listed bandwidth of 500 MHz and a slew rate of 1000 V/µs. According to the Analog Devices AD8007/AD8008 manufacturer datasheet, this speed supports high-frequency signal paths requiring rapid transitions and low-distortion amplification rather than general-purpose precision or micropower operation.
What type of operational amplifier is AD8008ARZ?
The AD8008ARZ is a dual current-feedback operational amplifier. In this topology, bandwidth is primarily influenced by the external feedback resistor rather than only by closed-loop gain, giving designers flexibility to use the amplifier across different gain stages while maintaining high-speed operation.
Is AD8008ARZ suitable for video and communications signal chains?
Yes, the AD8008ARZ is suitable for video and communications signal chains because its 500 MHz bandwidth, 1000 V/µs slew rate, and low distortion support high-frequency amplification. Its dual channels also permit two related functions in one 8-pin SOIC package, although channel-to-channel layout symmetry remains important.
Where to buy AD8008ARZ online?
Use the Request a Quote form on this page to request AD8008ARZ availability, lead time, and a commercial offer. The exact AD8008ARZ order code is a tube-packaged 8-pin SOIC device, so confirm the package, delivery configuration, and intended quantity when requesting a quote.
What is the price of AD8008ARZ?
Current commercial pricing for AD8008ARZ is handled through the Request a Quote form on this page. The structured price record associated with this part contains a unit-price reference but no qualifying current quantity-break table, so buyers should request a current offer rather than rely on a static historical amount.
What is the lead time for AD8008ARZ?
Request the current AD8008ARZ lead time through the Request a Quote form on this page. Lead time can change with manufacturer inventory, order quantity, and delivery configuration, so confirm the required tube quantity and destination when submitting the request.
Is AD8008ARZ in stock?
AD8008ARZ availability should be confirmed through the Request a Quote form on this page. The manufacturer lists the AD8008 family as active, but live stock, allocated inventory, and shipment timing are commercial conditions that can change after product information is published.
What is the best drop-in replacement for AD8008ARZ?
No independently verified five-part drop-in replacement set was established for the AD8008ARZ. AD8008AR is the closest documented same-brand option because it uses the same 8-pin SOIC device, while reel-labeled AD8008ARZ variants are packaging configurations rather than distinct engineering alternatives. Validate feedback values, supply conditions, and AC performance before substitution.
Can AD8008AR replace AD8008ARZ?
AD8008AR is a pin-compatible same-family option for an AD8008ARZ PCB because both identify the 8-pin SOIC AD8008 dual current-feedback amplifier. Before replacing the Z-designated version, confirm RoHS finish requirements, electrical characteristics, supplier traceability, and availability for the assembled design.
When should I choose AD8008ARZ over a generic high-speed op amp?
Choose the AD8008ARZ when the design requires two high-speed channels, current-feedback bandwidth control, 500 MHz bandwidth, and 1000 V/µs slew rate in a standard 8-pin SOIC. A generic voltage-feedback amplifier may be preferable only when its gain-bandwidth behavior, stability, supply range, noise, and distortion better match the intended signal path.
AD8008ARZ vs AD8008AR - which is better for a new design?
AD8008ARZ is the preferred choice when the ordered component must specifically carry the Z-designated ordering code and required lead-free product status. AD8008AR uses the same core 8-pin SOIC amplifier architecture, so electrical performance is closely aligned, but procurement documentation and traceability should determine which orderable MPN is appropriate.
What is the best Analog Devices equivalent for AD8008ARZ?
The closest same-brand equivalent identified is AD8008AR, which retains the dual current-feedback topology and 8-pin SOIC footprint. The AD8007 family is a single-channel device, so it is not a pin-to-pin substitute, and AD8008ARZ reel variants differ primarily in delivery format. Confirm electrical and qualification requirements before production use.
Where can I find the AD8008ARZ pinout?
Use the pin-description table and package drawing in the official Analog Devices AD8007/AD8008 manufacturer datasheet to assign PCB tracks. The verified catalog information identifies the package as 8-pin SOIC, but it does not expose the complete numbered pin list required to reproduce an authoritative pinout on this page.
How should feedback resistors be selected for AD8008ARZ?
Select the AD8008ARZ feedback resistor from the manufacturer's recommended-value table for the intended gain and operating conditions. Because it is a current-feedback amplifier, feedback resistance materially affects bandwidth and stability. Verify the chosen value against the datasheet's gain, noise, distortion, and capacitive-loading guidance.

کے لیے انجینئرنگ ریفرنس ڈیٹا AD8008ARZ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose AD8008ARZ for dual-channel, high-speed signal paths that require current-feedback operation, 500 MHz bandwidth, 1000 V/µs slew rate, and low distortion in an 8-pin SOIC package. AD8008AR is the closest same-brand alternative because it uses the same core device and footprint; select it when its ordering-code and traceability status satisfy the design requirements. The AD8007 family is appropriate when only one amplifier channel is needed, but it is not a pin-for-pin replacement for a dual design. Do not treat reel-labeled AD8008ARZ variants as distinct drop-in alternatives because they differ in delivery format. For any substitution, verify supply range, input offset, noise, distortion, feedback-resistor recommendations, output loading, and operating temperature against the manufacturer datasheet. For low-noise precision or micropower applications, choose an amplifier family optimized for those requirements rather than relying solely on the AD8008ARZ's speed and low quiescent current.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ AD8008AR
Package 8-SOIC (0.154 in, 3.90 mm width) 8-SOIC (0.154 in, 3.90 mm width)
Brand Analog Devices Analog Devices
Amplifier Type Current-feedback amplifier Current-feedback amplifier
Number of Circuits 2 circuits 2 circuits

اہم امتیازی خصوصیات

  • Combines dual-channel current feedback with high-speed performance (بمقابلہAD8007)
  • Provides fast edge handling for broadband signal paths (بمقابلہAD8608ARZ)
  • Maintains low quiescent current while operating at high speed (بمقابلہAD8008AR)

ڈیزائن نوٹس

Place the AD8008ARZ close to the signal source and load, and route input, feedback, and output paths as short, direct traces. High-speed currents can couple into adjacent circuitry through shared supply impedance or long return paths. Maintain a continuous ground reference and avoid routing sensitive input nodes beneath noisy digital or switching nets. Maintain symmetry between the two channels when timing or channel matching is important.

Do not select the feedback resistor from closed-loop gain alone. In a current-feedback amplifier, the manufacturer's recommended feedback value is tied to the intended gain and operating conditions. Using an unsuitable value can alter bandwidth, noise, distortion, and stability. Verify the proposed value against the AD8007/AD8008 manufacturer datasheet and retest with the actual source and load impedances.

Treat capacitive loading as part of the high-speed output design. Excess load capacitance can cause peaking, overshoot, or instability even when the amplifier is operated at a nominal gain. Keep output traces short, use an isolation resistor when driving a remote or capacitive load, and evaluate the complete source, cable, termination, and probe network before production release.

Decouple each supply connection with short, low-inductance connections to the ground plane and follow the manufacturer recommendations for bypass capacitance. Check the exact supply-voltage range and total supply-current capability in the AD8007/AD8008 datasheet before applying power. Because the device supports very fast edges, inadequate supply decoupling can inject modulation into the output even when the signal path is correctly routed.

تعمیل کی معلومات

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
لیڈ فری
Yes
ہیلوجن فری
[Data Needed: Halogen-Free Status]
کنفلیکٹ منرلز
Unknown

The product cross-reference record identifies ROHS3 compliance and REACH unaffected status. The Z-designated ordering code is associated with the lead-free ordering option, but no explicit AEC-Q100 qualification or conflict-minerals statement was found.

متعلقہ تلاشیں

AD8008ARZ datasheet AD8008ARZ datasheet pdf AD8008ARZ pinout AD8008ARZ specifications AD8008ARZ equivalent AD8008ARZ replacement AD8008ARZ cross reference AD8008ARZ vs AD8008AR AD8008ARZ SOIC-8 amplifier AD8008ARZ application circuit Analog Devices AD8008ARZ AD8008ARZ 500MHz amplifier AD8008ARZ price AD8008ARZ stock

متعلقہ اجزاء اور اصطلاحات

Analog Devices AD8008ARZ AD8008AR AD8007 AD8008 current-feedback amplifier operational amplifier amplifier IC analog signal processing 500 MHz bandwidth 1000 V/µs slew rate 4 µA quiescent current ultralow distortion second-generation XFCB process complementary bipolar process 8-pin SOIC SOIC package family surface-mount package feedback resistor video signal conditioning communications front end high-speed instrumentation RoHS REACH
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں