Analog Devices

ADF4351BCPZ-RL7 - 4.4GHz Integrated-VCO PLL | Analog Devices

MPN: ADF4351BCPZ-RL7 ✓ فعال
3.0 V to 3.6 V Vdss 32-lead LFCSP with exposed pad Package 35 MHz to 4400 MHz Speed
MOQ: 1 |

ADF4351BCPZ-RL7 جائزہ

The Analog Devices ADF4351BCPZ-RL7 is a fractional-N or integer-N wideband frequency synthesizer with an integrated voltage-controlled oscillator, covering output frequencies from 35 MHz to 4400 MHz. It accepts a 10 MHz to 250 MHz reference input, operates from a 3.0 V to 3.6 V supply, and is offered in a 32-lead LFCSP package with an exposed pad for improved thermal performance. The -40 °C to +85 °C grade supports industrial-temperature RF and instrumentation designs.

A frequency synthesizer is a PLL-based clock-generation device that locks a voltage-controlled oscillator to an external reference. In the broader electronics hierarchy, the ADF4351 belongs to clock and timing ICs, phase-locked loops, and RF frequency synthesizers. Its integrated VCO reduces board area by eliminating a separate oscillator, while an external reference and loop filter allow the design engineer to tune phase noise, reference spur performance, and channel spacing.

Principal features include support for both fractional-N and integer-N architectures, a wide 35 MHz to 4.4 GHz tuning range, and a 32-lead exposed-pad package. These characteristics suit local oscillators, wireless infrastructure, frequency-agile test equipment, and RF signal-chain clocking. The exposed pad conducts heat away from the die and must be connected to a low-impedance ground plane on multilayer PCBs.

The device uses a programmable register interface to configure the output frequency, divider settings, prescaler, charge-pump current, reference path, and diagnostic functions. Register programming determines the final output waveform and phase-noise behavior, so firmware must sequence power-up correctly and wait for the synthesizer to report lock before treating the RF output as valid.

Typical applications include wireless base-station and backhaul equipment, cellular and satellite test systems, microwave down-converters, laboratory frequency sources, and low-cost spectrum-analysis instruments. For designs above 1 GHz, controlled reference routing, short RF traces, and a properly designed loop filter are essential for stable lock and acceptable phase noise.

The main engineering trade-off is flexibility versus implementation effort. Although the integrated VCO simplifies the RF front end, the ADF4351 still requires a stable reference, an external loop filter, correct register configuration, and careful exposed-pad grounding. Use the manufacturer evaluation-board schematic and register guidance as the starting point for a new PLL design.

This page consolidates the device specifications, pin-package characteristics, qualified alternatives, comparison data, and practical PLL design guidance into one engineering reference. It also identifies which parameters require confirmation from the full manufacturer datasheet before schematic release or production layout.

کے لیے ڈراپ اِن متبادل ADF4351BCPZ-RL7 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADF4351BCPZ-RL7 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Architecture, Product Type, Device Type, Loop Filter.

Analog Devices
Package: 24-lead WFQFN with exposed pad
Architecture: Phase-locked loop with integrated dividers
Device Type: Fractional-N and integer-N RF frequency synthesizer
موازنہ کریں ADF4351BCPZ-RL7 →
Analog Devices
Package: 24-lead WFQFN with exposed pad
Architecture: External-VCO phase-locked loop
Product Type: Fractional-N/Integer-N frequency synthesizer IC
موازنہ کریں ADF4351BCPZ-RL7 →
Analog Devices
Package: 32-WFQFN exposed pad, CSP
Product Type: Fractional-N and Integer-N PLL frequency synthesizer with integrated VCO
Loop Filter: External
موازنہ کریں ADF4351BCPZ-RL7 →
Analog Devices
Package: 32-lead VFQFN exposed pad, CSP
Product Type: RF clock and frequency synthesizer IC
موازنہ کریں ADF4351BCPZ-RL7 →

ADF4350BCPZ-RL7

✅ ڈراپ-اِن
Analog Devices
📦 32-lead LFCSP with exposed pad
Fractional-N and Integer-N PLL frequency synthesizer with integrated VCO · 4.4 GHz · Fractional-N and Integer-N · Integrated · External reference frequency · External · -40°C to +85°C · 32-WFQFN exposed pad, CSP

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADF4351BCPZ-RL7 تفصیلات

Device Type Fractional-N or integer-N frequency synthesizer with integrated VCO
Output Frequency Range 35 MHz to 4400 MHz
Maximum Output Frequency 4.4 GHz
Reference Input Frequency Range 10 MHz to 250 MHz
Supply Voltage Range 3.0 V to 3.6 V
Maximum Supply Voltage 32 V
Architecture Fractional-N or integer-N PLL
VCO Integrated wideband voltage-controlled oscillator
External Loop Filter Required
External Reference Required
Number of Circuits 1
آپریٹنگ درجہ حرارت رینج -40 °C to +85 °C
پیکیج 32-lead LFCSP with exposed pad
Package Type 32-VFQFN exposed pad, CSP
ماؤنٹنگ ٹائپ Surface mount
Moisture Sensitivity Level MSL 3, 168 hours
RoHS Compliance ROHS3 compliant
REACH Compliance REACH unaffected

ADF4351BCPZ-RL7 32-vfqfn exposed pad, csp پن کنفیگریشن گائیڈ

ADF4351BCPZ-RL7 (32-vfqfn exposed pad, csp پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ADF4351BCPZ-RL7 کے لیے 32-vfqfn exposed pad, csp پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADF4351BCPZ-RL7.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ADF4351BCPZ-RL7 کے لیے موزوں ہے 6 ایپلیکیشنs: Wireless Base-Station RF Down-Conversion, Microwave Down-Converter Local Oscillator, Frequency-Aware Test and Measurement Equipment, Low-Cost Spectrum Analyzer Source, Satellite and Telemetry RF Modules, Clocked RF Signal-Chain Subsystems.

🌐

Wireless Base-Station RF Down-Conversion

The ADF4351BCPZ-RL7 is suited to wireless infrastructure designs that require an agile local oscillator for RF down-conversion. Its programmable output covers 35 MHz to 4400 MHz, allowing the same synthesizer platform to support multiple bands without changing the RF front-end layout. Place the RF output close to the mixer or LO distribution network and keep the reference path physically separated to reduce coupling. Program the N divider, prescaler, charge-pump current, and fractional-N settings for each channel, then verify lock across temperature and supply tolerance. The integrated VCO saves board area, but the external loop filter still determines phase noise and lock bandwidth.

📡

Microwave Down-Converter Local Oscillator

Use the ADF4351BCPZ-RL7 as a programmable local oscillator in microwave and RF down-converter subsystems requiring coverage through 4.4 GHz. The wide tuning range allows one synthesizer design to replace several fixed-frequency oscillators, while integer-N operation supports coherent channels with a higher division ratio. Route the RF output through a short, controlled-impedance trace and provide a clean return path to the device ground. Careful isolation from the reference and digital control signals is important because VCO harmonics and reference leakage can mix into the converted signal. Validate phase noise and spurs with the complete receiver chain rather than relying only on synthesizer-level measurements.

🖥️

Frequency-Aware Test and Measurement Equipment

The ADF4351BCPZ-RL7 fits laboratory instruments and automated test systems that need accurate, software-selectable RF excitation from 35 MHz to 4400 MHz. Its register-programmable frequency and fractional-N capability make it suitable for sweepers, signal generators, and ATE stimulus paths. Keep the reference oscillator and loop filter on the quiet side of the layout while preserving short RF routes to the output connector. Provide stable 3.0 V to 3.6 V supply and a well-thermalized exposed pad to minimize drift as the enclosure warms. Firmware should confirm the PLL lock state before starting a measurement so that out-of-lock channels do not create misleading test data.

📊

Low-Cost Spectrum Analyzer Source

The ADF4351BCPZ-RL7 can serve as the tunable RF source in a compact spectrum-analysis instrument covering 35 MHz through 4.4 GHz. The integrated VCO reduces the complexity of a multi-band source, and the programmable PLL supports channel-by-channel tuning. Stable reference selection remains essential because reference phase noise multiplies the VCO contribution and can determine close-in resolution. Follow the manufacturer reference layout for the loop filter and route the RF output toward the analyzer input through a short, impedance-controlled path. Add controllable attenuation or limiting at the connector as required. Validate harmonic and spurious levels after including the PCB, cables, enclosure, and external front-end components.

🛰️

Satellite and Telemetry RF Modules

The ADF4351BCPZ-RL7 is applicable to compact satellite telemetry, tracking, and communications modules requiring programmable RF frequencies within its 35 MHz to 4400 MHz range. Integer-N operation can be advantageous where a conservative channel plan and strong reference stability are priorities, while fractional-N capability provides additional channel flexibility. Keep the board layout compact so reference, digital-control, and RF paths do not interfere. The 32-lead exposed-pad package requires adequate ground vias and a continuous thermal plane, especially inside sealed enclosures. Validate operation over the full -40 °C to +85 °C device range and confirm lock behavior before and after temperature cycling.

🔧

Clocked RF Signal-Chain Subsystems

The ADF4351BCPZ-RL7 can clock RF signal-chain subsystems that require a tunable coherent reference, such as measurement receivers, IF-generation stages, and local-oscillator distribution boards. Combining the PLL and VCO in one device supports programmable output frequency while leaving the RF signal path free of multiple discrete oscillators. Use a low-jitter reference and place its return directly beneath the reference pins to limit jitter pickup. Separate the sensitive reference and baseband connections from the VCO output to prevent modulation of the carrier. The external loop filter should be designed for the intended phase-noise and lock-time requirements, and the register initialization sequence should include a lock-status check.

What is the operating frequency range of the ADF4351BCPZ-RL7?
The ADF4351BCPZ-RL7 generates output frequencies from 35 MHz to 4400 MHz using its integrated voltage-controlled oscillator. According to the Analog Devices ADF4351 product page, the device supports fractional-N or integer-N frequency-synthesizer implementations with an external reference and loop filter. This 4.4 GHz upper limit makes it suitable for RF down-conversion, wireless infrastructure, and wideband test equipment.
What does the BCPZ package mean for the ADF4351?
The BCPZ designation identifies the 32-lead LFCSP package with an exposed thermal pad. The exposed pad is not a functional RF output; it must be connected to ground, normally through multiple vias, so that heat can leave the device efficiently. The -RL7 suffix identifies the tape-and-reel, industrial-temperature ordering option. Use the package drawing in the manufacturer datasheet for land-pattern dimensions and pad numbering.
Where can I download the ADF4351BCPZ datasheet PDF?
The official ADF4351 documentation is available through the Analog Devices product page at https://www.analog.com/en/products/adf4351.html, where the datasheet, evaluation-board material, and ordering information are linked. The DigiKey and Mouser product records for ADF4351BCPZ-RL7 also provide direct access to manufacturer documents. Use the PDF datasheet for the complete electrical characteristics, register map, pin descriptions, and recommended application circuit.
What reference frequency does the ADF4351BCPZ-RL7 accept?
The ADF4351BCPZ-RL7 accepts an external reference from 10 MHz to 250 MHz. The reference path can be multiplied or divided through programmable divider settings to establish the internal comparison frequency. According to the manufacturer product description, an external reference frequency is required, so a low-jitter crystal oscillator or TCXO should be selected according to the phase-noise and spur requirements of the target channel.
How do I find the ADF4351BCPZ pinout and exposed-pad connection?
The ADF4351BCPZ-RL7 pinout is documented in the pin-description table of the manufacturer datasheet. Because the package includes an exposed pad, the PCB footprint must follow the ADI land pattern and connect the pad to ground with an adequate number of thermal vias. Treat the exposed pad as a ground connection, not as an optional pad. Use the SVG package diagram and manufacturer footprint files together to verify every net.
Is the ADF4351BCPZ-RL7 suitable for fractional-N operation?
Yes, the ADF4351BCPZ-RL7 supports both fractional-N and integer-N frequency synthesis. Fractional-N operation permits channel spacing smaller than the natural reference-derived step through programmable divider and interpolation settings, but the channel must remain within the 35 MHz to 4400 MHz VCO range. The ADF4350BCPZ-RL7 is a closely related same-family option, but it is a different device and should be checked against the required output range before substitution.
What are the key specifications engineers should know about ADF4351BCPZ-RL7?
The core specifications of the ADF4351BCPZ-RL7 are a 35 MHz to 4400 MHz output range, a 10 MHz to 250 MHz external-reference range, a 3.0 V to 3.6 V operating supply, and an industrial temperature range of -40 °C to +85 °C. The device also supports fractional-N and integer-N operation, integrates the VCO, and uses a 32-lead exposed-pad LFCSP package. Its programming interface and external loop filter are essential implementation details.
What can replace the ADF4351BCPZ-RL7?
The closest identified same-family replacement is the ADF4350BCPZ-RL7, which uses the same 32-lead LFCSP format but represents a different frequency-synthesizer model and therefore requires comparison of output range, register behavior, and application requirements. The ADF4356BCPZ is not a drop-in replacement because its pin assignments and functions differ despite using the same 32-lead LFCSP package. Always confirm pin-level and register-level compatibility before substitution.
Is the ADF4356BCPZ a drop-in replacement for the ADF4351BCPZ-RL7?
No, the ADF4356BCPZ is not a drop-in replacement for the ADF4351BCPZ-RL7. The published comparison identifies differences in pin assignments and functions even though both devices use a 32-lead LFCSP package. The ADF4356 also has a different register map and a higher-frequency VCO implementation. A shared package outline is therefore insufficient evidence of drop-in compatibility.
When should I choose the ADF4351BCPZ-RL7 instead of the ADF4350BCPZ-RL7?
Choose the ADF4351BCPZ-RL7 when the design requires its specific output-frequency range and fractional-N or integer-N PLL behavior across the required channels. The ADF4350BCPZ-RL7 is the closest same-family candidate, but the correct choice depends on its documented VCO range and functional differences. Review both manufacturer datasheets, the pin-description tables, register maps, and reference configurations before committing a PCB revision.
Is the ADF4351BCPZ-RL7 suitable for wireless infrastructure equipment?
Yes, the ADF4351BCPZ-RL7 fits wireless infrastructure and test-equipment designs that need programmable RF output from 35 MHz to 4.4 GHz. Its integrated VCO simplifies the frequency-generation section, while the programmable PLL architecture supports channel selection. For infrastructure equipment, evaluate reference phase noise, loop bandwidth, PCB isolation, and the exposed-pad thermal path before production release.
What are the most common ADF4351BCPZ layout mistakes?
The most common layout errors are an inadequately grounded exposed pad, long or unterminated RF output traces, and poor isolation between the VCO output and sensitive reference or baseband nodes. Place input, output, and decoupling connections directly at their associated pins, provide multiple ground vias for the exposed pad, and follow the manufacturer reference layout. These practices reduce ground bounce, coupling, and PLL instability.
How should the ADF4351 external loop filter and reference be laid out?
The ADF4351 loop filter and reference network should be compact, tightly routed, and placed near the device while keeping sensitive nodes away from the VCO output. Follow the manufacturer evaluation-board schematic to select charge-pump current and loop-filter values. The reference input should see a clean low-jitter source, short traces, and proper return grounding. Filter and layout choices directly determine lock bandwidth, phase noise, and reference-spur behavior.
What power supply decoupling does the ADF4351BCPZ-RL7 require?
The ADF4351BCPZ-RL7 operates from a 3.0 V to 3.6 V supply, so the supply rails must be decoupled close to the device pins. Place the recommended ceramic bypass capacitors at the package pins with short ground returns, and connect the exposed pad to a solid ground plane through thermal vias. Verify the exact capacitor values and layout in the manufacturer application guidance rather than relying on generic bulk-capacitor placement.
Where can I buy the ADF4351BCPZ-RL7 and request a quotation?
The ADF4351BCPZ-RL7 can be requested through the Request a Quote form on this product page. The form is the appropriate route for current commercial terms, quantity availability, lead time, and traceability requirements. The device is also listed by major authorized distributors and appears in stock on at least one regional listing, but current supply conditions should always be confirmed through a fresh quotation.
How does the ADF4351BCPZ-RL7 differ from the ADF4150BCPZ-RL7?
The ADF4351BCPZ-RL7 integrates a wideband VCO, whereas the ADF4150 family is a different PLL frequency-synthesizer architecture with different RF functions and register behavior. Although both appear in 32-lead LFCSP options and can be used in clock-generation designs, that similarity does not make them drop-in replacements. Verify output range, required external components, pin assignments, and firmware configuration independently for each device.

کے لیے انجینئرنگ ریفرنس ڈیٹا ADF4351BCPZ-RL7 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the ADF4351BCPZ-RL7 when the design needs a programmable 35 MHz to 4.4 GHz source with an integrated VCO, fractional-N flexibility, and a 3.0 V to 3.6 V supply. The ADF4350BCPZ-RL7 is the closest identified same-family candidate in the 32-lead exposed-pad format, but it is a different model whose output range, register behavior, and channel requirements must be checked before substitution. ADF4356BCPZ options are unsuitable as drop-ins because their pin assignments and register map differ. Do not treat a shared LFCSP outline as proof of compatibility. For production, compare the required VCO coverage, reference frequency, loop-filter design, phase-noise target, spurious requirements, firmware configuration, and exposed-pad footprint. If a single verified pin-compatible option cannot be confirmed, retain the original device and plan the PCB around it rather than forcing a functionally similar but unverified substitute.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ADF4350BCPZ-RL7
Brand Analog Devices Analog Devices
Package 32-lead LFCSP with exposed pad 32-lead LFCSP with exposed pad

اہم امتیازی خصوصیات

  • Wide integrated-VCO tuning range (بمقابلہADF4350BCPZ-RL7)
  • Supports fractional-N and integer-N architectures (بمقابلہADF4350BCPZ-RL7)
  • Wide external-reference acceptance (بمقابلہADF4350BCPZ-RL7)

ڈیزائن نوٹس

Build the RF output route as a short, controlled-impedance trace directly from the VCO output pin, with a continuous return path on an adjacent ground reference plane. Keep the external loop filter and reference components close to their associated pins, and avoid routing sensitive reference or baseband nets beneath the RF output. Use the ADI evaluation-board layout and manufacturer footprint files as the baseline, then adjust only after stability and phase-noise measurements.

Treat the exposed pad as both an electrical and thermal feature. Solder it to the ground plane and add the number of thermal vias recommended by the manufacturer land pattern; do not leave the pad floating because that removes the primary heat-transfer path from the die. Estimated thermal performance cannot be assigned without board size, copper area, ambient temperature, and dissipated power, so use the package thermal model and PCB-specific calculation before release.

A common PLL error is selecting the loop-filter and charge-pump settings without defining lock time, phase noise, and spur requirements. Begin with the manufacturer evaluation circuit, then change one parameter at a time and measure both lock behavior and reference spurs. Also avoid powering the RF output path before the PLL has locked, because downstream converters and receivers can respond incorrectly to an unstable or out-of-band carrier.

تعمیل کی معلومات

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

ROHS3-compliant and REACH-unaffected status are reported for the ADF4351BCPZ-RL7. No automotive qualification, halogen-free declaration, or conflict-minerals statement is established by the available product information.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

adf4351bcpz datasheet adf4351bcpz pdf ADF4351BCPZ-RL7 datasheet ADF4351BCPZ-RL7 pinout ADF4351BCPZ-RL7 footprint ADF4351BCPZ-RL7 replacement ADF4351BCPZ-RL7 equivalent ADF4351BCPZ-RL7 price ADF4351BCPZ-RL7 stock Analog Devices ADF4351BCPZ ADF4351 4.4GHz PLL VCO ADF4351 fractional N application circuit

متعلقہ اجزاء اور اصطلاحات

Analog Devices ADF4351BCPZ-RL7 ADF4350BCPZ-RL7 ADF4351BCPZ ADF4356BCPZ ADF4150BCPZ-RL7 frequency synthesizer phase-locked loop PLL voltage-controlled oscillator integrated VCO fractional-N integer-N clock and timing IC RF frequency synthesizer 32-lead LFCSP exposed pad RoHS REACH MSL 3 loop filter external reference phase noise wireless infrastructure spectrum analysis
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں