ADS8345N - 16-Bit 100-kSPS 8-Channel SAR ADC | Texas Instruments
MPN: ADS8345N ✓ فعالADS8345N جائزہ
An ADC is a mixed-signal semiconductor that converts continuously varying analog voltages into numerical values for processing, storage, or control. A SAR ADC performs conversion by successively testing weighted bit decisions against an internal comparator. The ADS8345 belongs to the ADC, data-converter IC, signal-chain IC, and broader semiconductor hierarchy, combining analog input conditioning, a sampling multiplexer, digital conversion, and a serial output interface.
Key features include 16-bit resolution, a maximum conversion rate of 100 kSPS, eight multiplexed single-ended inputs or four differential inputs, and operation from 2.7 V to 5 V. The 85 dB SINAD specification provides a compact indication of conversion performance, while the integrated multiplexer reduces the number of external analog switches required for multi-channel measurements. The four-wire interface separates chip select, serial clock, data input, and data output functions.
The ADS8345N uses a synchronous serial interface compatible with several microprocessor families. Its digital inputs are overvoltage tolerant to +5.5 V regardless of the supply voltage, which can simplify connections between lower-voltage converters and systems using higher-voltage digital signaling. The converter is intended for single-supply operation and is offered in SSOP-20 and QSOP-20 package configurations, with the N ordering identifying the SSOP-20 version.
Typical applications include data acquisition, test and measurement equipment, industrial process control, battery-powered portable instruments, personal digital assistants, and multichannel data loggers. The serial interface also supports cost-effective isolation when the ADC is placed across an isolation barrier. Differential operation is particularly useful when the measured signal requires rejection of common-mode noise.
Designers should pay attention to input range, reference voltage, acquisition time, source impedance, and serial-interface timing. The selected analog range must match the sensor or transducer output, while the reference and external network must preserve the converter's 16-bit performance. Layout should keep analog and digital return paths controlled and place input and reference components close to their associated pins.
This page combines the manufacturer's core electrical characteristics with practical application guidance, pin-level connection information, and a focused comparison of same-family pin-compatible options. It is intended to help engineers select, implement, and source the ADS8345N for compact multichannel measurement systems.
کے لیے ڈراپ اِن متبادل ADS8345N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADS8345N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Input Type, Mounting Type, Signal-to-Noise and Distortion.
ADS7844N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADS8344N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADS8346N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADS8347N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADS8345N/1K
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADS8345N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ADC Type | Successive-approximation-register SAR ADC |
| ریزولوشن | 16 bit |
| Conversion Rate | 100 kSPS |
| Input Configuration | 8 single-ended inputs or 4 differential inputs |
| Input Type | Fully differential |
| Supply Voltage Range | 2.7 V to 5 V |
| Signal-to-Noise and Distortion | 85 dB SINAD |
| Serial Interface | 4-wire synchronous serial interface |
| Digital Input Overvoltage Tolerance | +5.5 V regardless of VCC |
| آپریٹنگ درجہ حرارت رینج | -40 °C to +85 °C |
| پیکیج | 20-pin SSOP |
| ماؤنٹنگ ٹائپ | Surface mount |
| Input Multiplexer | Onboard 8-channel multiplexer |
| Applications | Data acquisition, test and measurement, and industrial process control |
| Isolation Support | 4-wire serial interface suitable for low-cost isolated data acquisition |
ADS8345N پن کنفیگریشن
| پن 1 | REF+ — Positive external reference input |
| پن 2 | A1+ — Positive input for analog channel 1 |
| پن 3 | A1- — Negative input for analog channel 1 |
| پن 4 | A2+ — Positive input for analog channel 2 |
| پن 5 | A2- — Negative input for analog channel 2 |
| پن 6 | A3+ — Positive input for analog channel 3 |
| پن 7 | A3- — Negative input for analog channel 3 |
| پن 8 | AGND — Analog ground |
| پن 9 | DGND — Digital ground |
| پن 10 | CS — Active-low chip-select input |
| پن 11 | SCLK — Serial clock input |
| پن 12 | DOUT — Serial data output |
| پن 13 | DIN — Serial data input |
| پن 14 | REF- — Negative external reference input |
| پن 15 | A4+ — Positive input for analog channel 4 |
| پن 16 | A4- — Negative input for analog channel 4 |
| پن 17 | A5+ — Positive input for analog channel 5 |
| پن 18 | A5- — Negative input for analog channel 5 |
| پن 19 | A6+ — Positive input for analog channel 6 |
| پن 20 | A6- — Negative input for analog channel 6 |
عام استعمالات
ADS8345N کے لیے موزوں ہے 6 ایپلیکیشنs: Multichannel Data Acquisition, Industrial Process Control, Portable Battery Instruments, Test and Measurement Equipment, Isolated Remote Data Acquisition, Battery-Powered Personal Digital Assistants.
Multichannel Data Acquisition
The ADS8345N is well suited to multichannel data-acquisition systems because its onboard multiplexer supports eight single-ended inputs or four differential inputs while maintaining a maximum conversion rate of 100 kSPS. According to the Texas Instruments ADS8345 datasheet, the 16-bit converter delivers 85 dB SINAD from a single 2.7 V to 5 V supply. A microcontroller can select channels through the four-wire serial interface and acquire successive readings without requiring a separate analog multiplexer. Differential pairs are preferable when sensor outputs include significant common-mode noise, while single-ended channels reduce wiring complexity for slowly varying laboratory signals.
تجویز کردہ
Industrial Process Control
The ADS8345N can monitor several analog process variables when the controller needs 16-bit measurement resolution in a compact 20-pin SSOP package. Its eight single-ended inputs support sensor multiplexing, while four differential inputs can monitor current-output or bridge-based transducers. The 100-kSPS conversion rate provides temporal resolution for closed-loop monitoring, and operation from 2.7 V to 5 V supports both 3.3 V and 5 V industrial systems. According to the Texas Instruments ADS8345 datasheet, the -40 °C to +85 °C operating range covers many industrial environments.
تجویز کردہ
Portable Battery Instruments
The ADS8345N suits portable measurement instruments because its 2.7 V to 5 V single-supply operation permits direct use from common battery-derived rails. The onboard eight-channel multiplexer reduces component count, while the 16-bit, 100-kSPS converter supports accurate acquisition of pressure, temperature, position, and biomedical signals. According to the Texas Instruments ADS8345 datasheet, low-power operation and the onboard multiplexer target battery-powered data loggers and personal digital assistants. Duty-cycle the converter and control peripheral loads when minimizing average battery consumption is important.
تجویز کردہ
Test and Measurement Equipment
The ADS8345N can serve as the front-end converter in programmable instruments that require several input channels and 16-bit resolution. Its 100-kSPS rate accommodates moderate-bandwidth waveform capture, sensor bridges, and general-purpose laboratory measurements, while the four-wire synchronous serial interface supports deterministic host-controller communication. According to the Texas Instruments ADS8345 datasheet, the device is specifically identified for test and measurement equipment. Choose the differential configuration when driving signals through balanced fixtures to reduce sensitivity to ground offsets and external interference.
تجویز کردہ
Isolated Remote Data Acquisition
The ADS8345N's four-wire serial interface can help implement an isolated data-acquisition link because serial communication requires fewer wires crossing the isolation boundary than a parallel interface. Place the converter near the remote sensor and transfer data across an optically or digitally isolated serial channel. According to the Texas Instruments ADS8345 datasheet, the interface provides low-cost isolation for remote data acquisition. The design must still address isolated power, grounding, input-range compatibility, and the timing relationship between chip select, serial clock, and serial data on both sides of the barrier.
تجویز کردہ
Battery-Powered Personal Digital Assistants
The ADS8345N is suitable for compact personal digital assistants and portable data loggers that acquire analog information from multiple sensors. Its onboard multiplexer replaces several external analog switches, while operation down to 2.7 V supports low-voltage system rails. According to the Texas Instruments ADS8345 datasheet, the converter is intended for battery-operated personal digital assistants and portable multichannel data loggers. The 16-bit resolution preserves fine amplitude detail, and the 100-kSPS maximum rate supports responsive acquisition without requiring a parallel ADC interface on the system controller.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADS8345N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADS7844N | ADS8344N | ADS8346N | ADS8347N | ADS8345N/1K |
|---|---|---|---|---|---|---|
| Package | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Conversion Rate | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS |
اہم امتیازی خصوصیات
- Combines eight-channel multiplexing with fully differential input capability (بمقابلہADS8344N)
- Pin compatibility supports PCB reuse across established TI converter families (بمقابلہADS7844N)
- Single-supply operation supports compact embedded systems (بمقابلہADS8347N)
ڈیزائن نوٹس
Route analog inputs and reference signals away from the serial clock and data outputs, and connect AGND and DGND according to the manufacturer grounding guidance. Place input and reference network components close to the associated pins, minimize loop area, and use a quiet ground path beneath the analog section. Poor return-current routing can add conversion error even when the external resistor and capacitor values match the reference circuit.
Drive the serial interface from a controller with compatible signal levels and account for the digital input overvoltage tolerance rather than treating it as a general-purpose logic-standard requirement. Keep SCLK, CS, DIN, and DOUT traces short, avoid routing them parallel to sensitive analog inputs, and observe acquisition and conversion timing from the datasheet. The four-wire synchronous interface provides deterministic data transfer when chip select, clock, and output timing are configured correctly.
Do not treat the 100-kSPS conversion rate as an unlimited acquisition bandwidth. The usable signal bandwidth depends on input impedance, source settling, acquisition time, reference stability, filter design, and the controller's sampling cadence. Use differential inputs when common-mode rejection is important, and verify that the source can charge the internal sampling network through the selected impedance during each conversion cycle.
Follow the 20-pin SSOP footprint and pin-1 orientation without relocating pins or changing the package variant. Provide short, symmetrical routes for differential channels and keep analog input nodes physically small to minimize parasitic capacitance and susceptibility to injected noise. Verify the decoupling network and reference components against the manufacturer application circuit before releasing the PCB for fabrication.
تعمیل کی معلومات
The ADS8345 family is ensured over -40 °C to +85 °C. Specific environmental and material compliance declarations are not stated on the cited product pages.
