ADV7162KS140 - 220 MHz True-Color Video RAM-DAC | Analog Devices
MPN: ADV7162KS140 ✗ اختتامِ زندگیADV7162KS140 جائزہ
A video RAM-DAC is a specialized digital-to-analog converter that combines color DACs, palette storage, pixel-data handling, clock generation, and display timing in one integrated circuit. It belongs to the DAC and ADC/DAC hierarchy, where the RAM-DAC adds graphics-specific memory and cursor functions to the basic role of converting digital values into analog voltages. This integration reduces the number of separate components required in a graphics subsystem.
The ADV7162KS140 supports a 96-bit pixel port for high screen resolutions and provides triple 10-bit DACs with gamma correction. Maximum DAC-to-DAC color matching is 2%. Its integrated PLL supports synchronization of the digital interface and analog outputs, while the on-board 64 × 64 cursor permits hardware display of a programmable pointer without requiring separate cursor-generation logic.
The 160-lead MQFP package provides a substantial pin count for the wide pixel port, three analog DAC outputs, palette and cursor interfaces, synchronization signals, control inputs, and power connections. Because this is a mixed-signal graphics IC, correct implementation requires careful separation between digital pixel, memory, and clock traces and the sensitive red, green, and blue analog outputs. The 220 MHz operating capability makes the device suited to demanding legacy workstation and accelerator designs rather than modern low-resolution consumer displays.
Typical uses include color graphics workstations, Windows accelerator cards, industrial CRT graphics controllers, professional visualization systems, and embedded legacy display subsystems. In these systems, the RAM-DAC accepts pixel data, retrieves color information from palette memory, and converts the selected color into three analog video channels. The hardware cursor can be overlaid independently, simplifying pointer display in graphical user interfaces.
A key design consideration is analog-output implementation. Route the three DAC outputs as short, controlled-impedance traces, provide the required supply and reference bypassing, and follow the manufacturer datasheet for termination and output-buffer recommendations. Keep switching-clock and high-speed digital traces away from the analog outputs to minimize color-conversion errors and preserve image quality.
This product page combines the device architecture, pin-package information, practical signal-integrity guidance, application context, and a structured drop-in alternative review for engineers evaluating legacy graphics-controller upgrades.
کے لیے ڈراپ اِن متبادل ADV7162KS140 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADV7162KS140 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Integrated PLL, Package, Product Type, Color Palette RAM.
ADV7160KS140
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADV7162KS100
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADV7162KS120
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADV7162KS160
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADV7162KS200
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ADV7162KS140 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | True-color video RAM-DAC |
| Maximum Pixel Clock | 220 MHz |
| Pixel Port Width | 96 bit |
| DAC Resolution | 10 bit per channel |
| DAC Channels | 3 channels |
| Gamma Correction | Supported by all three DAC channels |
| Maximum DAC-to-DAC Color Matching | 2% maximum |
| Integrated PLL | Yes |
| Cursor RAM Organization | 64 × 64 |
| Palette RAM | Triple × 30 entries |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Temperature Grade | Commercial |
| پیکیج | 160-pin MQFP |
| Package Type | Square QFP |
| Terminal Count | 160 terminals |
| Lead Style | Gull wing |
| ماؤنٹنگ ٹائپ | Surface mount |
ADV7162KS140 square qfp پن کنفیگریشن گائیڈ
ADV7162KS140 (square qfp پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADV7162KS140.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ADV7162KS140 کے لیے موزوں ہے 6 ایپلیکیشنs: Color Graphics Workstations, Windows Accelerator Cards, Industrial CRT Monitor Controllers, Professional Visualization Systems, Embedded CRT Control Systems, Digital Simulation and Imaging Workstations.
Color Graphics Workstations
The ADV7162KS140 fits legacy color workstation designs that require a wide pixel-data path and high-rate analog video generation. Its 96-bit pixel port accepts high-resolution pixel information, while three 10-bit DACs produce separate red, green, and blue outputs. The documented 220 MHz capability supports demanding timing configurations, and the integrated PLL simplifies synchronization within the graphics subsystem. The 64 × 64 hardware cursor also supports pointer overlays without requiring a separate cursor-conversion circuit.
تجویز کردہ
Windows Accelerator Cards
The ADV7162KS140 is appropriate for a legacy Windows accelerator architecture in which the graphics controller supplies pixel data and the RAM-DAC performs palette lookup and color conversion. The 96-bit pixel port supports wide frame data transfer, while the three 10-bit DAC channels provide separate color outputs. Its 220 MHz rating makes it more suitable for high-refresh or high-resolution modes than lower-speed RAM-DAC options. The integrated PLL and cursor RAM reduce peripheral circuitry around the accelerator.
تجویز کردہ
Industrial CRT Monitor Controllers
The ADV7162KS140 can serve a legacy industrial CRT controller when the system uses an RGB analog-video architecture and a compatible graphics bus. The three independent 10-bit DAC channels provide the required red, green, and blue conversion, and the maximum 2% DAC-to-DAC color-matching specification supports consistent output across channels. The 220 MHz pixel-clock capability accommodates demanding display modes, but signal timing, synchronization polarity, thermal qualification, and EMC requirements must be validated for each industrial installation.
تجویز کردہ
Professional Visualization Systems
Professional visualization systems benefit from the ADV7162KS140 when they require deterministic RGB output from a digital graphics pipeline. The 96-bit pixel port and triple 10-bit converters preserve fine color gradation, while the hardware cursor supports interactive displays used in simulation, imaging, and command interfaces. The 220 MHz maximum pixel clock offers performance headroom for high-resolution legacy workstations. Designers should follow the datasheet output recommendations and preserve controlled analog routing to maintain color consistency.
تجویز کردہ
Embedded CRT Control Systems
The ADV7162KS140 is suitable for embedded systems that retain a CRT display interface but need a dedicated palette-DAC and cursor function. Its integrated palette RAM, programmable 64 × 64 cursor, PLL, and three 10-bit color DACs consolidate functions that would otherwise require several devices. The 96-bit pixel port can connect to a suitable graphics engine, and the 4.75 V to 5.25 V supply range supports conventional 5 V logic designs. System qualification should confirm temperature grade and display timing.
تجویز کردہ
Digital Simulation and Imaging Workstations
The ADV7162KS140 supports simulation, medical-imaging, and industrial-imaging displays that depend on accurate RGB conversion from a digital rendering engine. Its 10-bit-per-channel DAC architecture provides substantially finer color granularity than 8-bit systems, and the 2% maximum channel-to-channel matching specification helps maintain consistent color output. The 220 MHz pixel rate supports demanding legacy display modes, while the hardware cursor provides a direct pointer path for operator controls. Analog layout and output termination remain critical to image quality.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADV7162KS140 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADV7160KS140 | ADV7162KS100 | ADV7162KS120 | ADV7162KS160 | ADV7162KS200 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 160-pin MQFP | 160-pin MQFP | 160-pin MQFP | 160-pin MQFP | 160-pin MQFP | 160-pin MQFP |
| Product Type | True-color video RAM-DAC | Video RAM-DAC | Video RAM-DAC | Video RAM-DAC | Video RAM-DAC | Video RAM-DAC |
| Pixel Port Width | 96 bit | 96 bit | 96 bit | 96 bit | 96 bit | 96 bit |
| DAC Resolution | 3 × 10 bit | 3 × 10 bit | 3 × 10 bit | 3 × 10 bit | 3 × 10 bit | 3 × 10 bit |
| DAC Channels | 3 channels | 3 channels | 3 channels | 3 channels | 3 channels | 3 channels |
| Integrated PLL | Yes | Yes | Yes | Yes | Yes | Yes |
| Hardware Cursor | 64 × 64 | 64 × 64 | 64 × 64 | 64 × 64 | 64 × 64 | 64 × 64 |
اہم امتیازی خصوصیات
- Higher pixel-clock ceiling within the same speed-grade family (بمقابلہADV7162KS200)
- Clock-rate margin over the 160 MHz family alternative (بمقابلہADV7162KS160)
- Complete graphics subsystem integration (بمقابلہADV7160KS140)
ڈیزائن نوٹس
Separate the red, green, and blue DAC outputs from the 96-bit pixel bus, palette signals, and clock paths. Place the analog output network close to the corresponding device pins and use the manufacturer datasheet as the authority for output topology and termination. Avoid routing high-speed digital signals beneath the analog outputs because shared-plane coupling can produce color-dependent timing and amplitude errors.
Provide a low-impedance 5 V supply and place the required bypass capacitors directly at the power terminals. The stated operating range is 4.75 V to 5.25 V, so the system rail must remain inside that interval under transient load. Follow the datasheet capacitor values and recommended placement rather than substituting general bulk capacitance, and account for voltage drop along the supply path.
Treat the pixel clock and video data as a coordinated high-speed interface. Match trace topology and impedance according to the original graphics-system design, minimize stubs and unnecessary vias, and maintain consistent return paths. Validate setup and hold timing at the 220 MHz operating condition because timing margin may differ from lower-frequency operation and can determine whether a lower-speed RAM-DAC can substitute.
Do not select a replacement solely by the ADV7162 family name. Confirm the 160-pin MQFP footprint, maximum pixel clock, temperature grade, supply range, cursor organization, and every pin assignment. A lower speed grade can prevent operation at the intended resolution or refresh rate even when the package is physically identical, while an ADV7160-family device may differ in family-specific behavior.
تعمیل کی معلومات
The catalog information identifies a commercial-grade device but does not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations.