ATMEGA169P-16MU - AVR 8-bit MCU 16KB 16MHz 64-QFN | Microchip
MPN: ATMEGA169P-16MU ✓ فعالATMEGA169P-16MU جائزہ
An 8-bit microcontroller is a single-chip computer integrating a CPU, program memory, data memory, and peripherals on one die. Within the power-management and embedded-systems hierarchy, the ATmega family sits in the general-purpose MCU class, competing with the Microchip PIC and ST STM8 families. The AVR enhanced RISC architecture executes most of its 133 instructions in a single clock cycle, delivering throughput approaching 1 MIPS per MHz, which lets designers trade clock speed directly against power consumption.
Key features include 16 MIPS throughput at 16 MHz, an 8-channel 10-bit ADC, a JTAG interface for on-chip debugging and boundary scan, and a segment LCD driver that distinguishes the ATmega169 family from the pin-compatible ATmega165 (which lacks the LCD controller). The P-suffix die adds improved data-retention and reliability characteristics over the original ATmega169.
Technically, the device uses a Harvard architecture with separate program and data buses, self-programmable Flash for field updates, and in-system programmability (ISP) via SPI. Two 8-bit timers, one 16-bit timer, USI, and the on-chip debug reduce external component count in cost-sensitive designs.
Typical applications include battery-powered devices with LCD displays such as utility meters, hand-held instrumentation, and consumer appliances, where the integrated LCD driver and 2.7 V low-voltage operation extend battery life.
Design consideration: the 64-QFN package requires the exposed pad soldered to a grounded PCB thermal pad for reliable ground connection and heat dissipation.
This page synthesizes distributor listing data, drop-in alternatives, and design guidance not found in the manufacturer datasheet alone. Pricing shown as of 2026-09-16.
کے لیے ڈراپ اِن متبادل ATMEGA169P-16MU — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATMEGA169P-16MU (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Instructions, Core Architecture, Throughput, ADC.
ATMEGA169PA-16MU
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATMEGA165P-16MU
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATMEGA325P-16MU
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATMEGA329P-16MU
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATMEGA169PV-8MU
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATMEGA169P-16MU زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | AVR enhanced RISC, 8-bit |
| Flash Program Memory | 16 KB (8K x 16), self-programmable |
| SRAM | 1 KB |
| EEPROM | 512 B |
| زیادہ سے زیادہ کلاک فریکوئنسی | 16 MHz |
| Throughput | 16 MIPS at 16 MHz (1 MIPS per MHz) |
| Supply Voltage Range | 2.7 V to 5.5 V |
| ADC | 8-channel, 10-bit |
| LCD Controller | Yes, segment LCD driver |
| Debug Interface | JTAG (on-chip debug and boundary scan) |
| I/O Ports | 53 I/O lines |
| Instructions | 133 instructions, most single-cycle |
| پیکیج | 64-QFN (MLF), 9x9 mm |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Programming Interface | ISP via SPI; self-programming Flash |
ATMEGA169P-16MU 64-qfn (mlf), 9x9 mm پن کنفیگریشن گائیڈ
ATMEGA169P-16MU (64-qfn (mlf), 9x9 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ATMEGA169P-16MU.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ATMEGA169P-16MU کے لیے موزوں ہے 6 ایپلیکیشنs: Utility Metering with LCD Display, Hand-Held Test and Measurement Instruments, Consumer Appliance Control Panels, Industrial Sensor Nodes, Battery-Powered Wearable and Portable Devices, Automotive Body and Convenience Electronics (Non-Safety).
Utility Metering with LCD Display
Electricity, water, and gas meters need a processor that can drive a segment LCD, sample analog sensors, and survive years on battery or shunt-derived power. The ATMEGA169P-16MU fits this role because its integrated LCD controller removes an external LCD driver IC, its 8-channel 10-bit ADC samples current and voltage sense inputs directly, and its 2.7 V minimum supply supports low-cell-count power trees. Firmware executes from self-programmable 16 KB Flash, enabling field tariff updates through the ISP interface. Running the AVR at reduced clock frequency cuts active current proportionally since throughput is roughly 1 MIPS per MHz. The 64-QFN (MLF) package suits high-volume reflow assembly in sealed meter enclosures. For new designs, the picoPower ATMEGA169PA-16MU in the same footprint lowers sleep current further, extending battery life without PCB changes.
تجویز کردہ
Hand-Held Test and Measurement Instruments
Portable multimeters, environmental meters, and hand-held gauges combine an LCD, buttons, and an analog front end - exactly the peripheral set integrated in the ATMEGA169P-16MU. The 8-channel 10-bit ADC digitizes sensor inputs without an external converter, while 1 KB SRAM holds calibration tables and display buffers. JTAG on-chip debug lets engineers set breakpoints in the field-calibration firmware during development using an Atmel-ICE. The 133-instruction single-cycle AVR core delivers 16 MIPS at 16 MHz, sufficient for RMS math on sampled waveforms at modest clock rates, preserving battery budget. The 64-QFN 9x9 mm package keeps the main PCB compact for probe-style form factors. Products needing more code headroom can migrate to the pin-compatible ATMEGA325P-16MU without layout change.
تجویز کردہ
Consumer Appliance Control Panels
Ovens, coffee machines, and HVAC controllers pair a segment LCD with relays, sensors, and a UI - a workload well matched to the ATMEGA169P-16MU. Its 53 general-purpose I/O lines drive keys, LEDs, and relays directly, the LCD controller renders temperatures and setpoints without a companion driver, and the 10-bit ADC reads NTC thermistors for closed-loop control. The wide 2.7 V to 5.5 V supply range tolerates unregulated appliance aux supplies, and power-down mode with wake-on-interrupt cuts standby consumption to meet eco-standby targets. The 64-QFN (MLF) package withstands reflow profiles used in high-volume appliance PCBA assembly, and self-programmable Flash supports post-production feature enablement. The ATMEGA169PA-16MU offers the same footprint with improved noise immunity and lower current for new designs.
تجویز کردہ
Industrial Sensor Nodes
Distributed industrial sensing - temperature, pressure, level - benefits from a local MCU that samples, scales, and displays data on a simple LCD while communicating over legacy buses. The ATMEGA169P-16MU provides the 8-channel 10-bit ADC for sensor interfaces, the SPI-based ISP and USI for serial links, and enough 16 MHz throughput for linearization math in single-cycle AVR instructions. Its 5.5 V maximum supply connects directly to legacy 5 V industrial rails without an LDO, simplifying node BOM cost. Power-save modes support duty-cycled sampling that stretches loop-powered budgets. The 64-QFN package with exposed ground pad improves EMI behavior versus leaded packages when the node sits near motor drives. Designs migrating to lower power should drop in the ATMEGA169PA-16MU, which requires no layout change.
تجویز کردہ
Battery-Powered Wearable and Portable Devices
Pedometers, medical dosimeters, and portable identifiers need an MCU with an always-on LCD, infrequent computation bursts, and minimal average current. The ATMEGA169P-16MU addresses this with its segment LCD controller that can remain active in power-save mode, wake-on-interrupt timers, and operation down to 2.7 V from lithium coin cells via simple regulation. The AVR core executes display update and algorithm code quickly, so the device can return to sleep within milliseconds, and the 512 B EEPROM stores user settings and accumulated counters without external nonvolatile memory. JTAG supports production test and calibration. Because throughput scales at about 1 MIPS per MHz, firmware can deliberately trade speed for current. The ATMEGA169PA-16MU, in the identical 64-QFN package, is the preferred choice for new battery designs thanks to picoPower sleep currents.
تجویز کردہ
Automotive Body and Convenience Electronics (Non-Safety)
Non-safety automotive subfunctions - seat-position displays, keypads, climate panel indicators - historically used ATmega LCD MCUs because they integrate display, ADC, and robust 5 V operation in one die. The ATMEGA169P-16MU covers these needs with its LCD controller, 8-channel 10-bit ADC for potentiometer and thermistor feedback, 53 I/O lines for switch matrices, and 2.7-5.5 V operation compatible with 12 V rails via a simple regulator. Note that the standard ATMEGA169P is not AEC-Q100 qualified; verify the specific automotive grade variant and PPAP requirements with Microchip before committing the part to a vehicle program. For new automotive designs, consult Microchip's automotive-qualified AVR LCD family rather than assuming interchangeability. The exposed-pad 64-QFN package supports the vibration-resistant soldering typical of automotive PCBA.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ATMEGA169P-16MU — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ATMEGA169PA-16MU | ATMEGA165P-16MU | ATMEGA325P-16MU | ATMEGA329P-16MU | ATMEGA169PV-8MU |
|---|---|---|---|---|---|---|
| Package | 64-QFN (MLF) 9x9 mm | 64-QFN (MLF) 9x9 mm - same | 64-QFN (MLF) 9x9 mm - same | 64-QFN (MLF) 9x9 mm - same | 64-QFN (MLF) 9x9 mm - same | 64-QFN (MLF) 9x9 mm - same |
| Brand | Microchip Technology (Atmel) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16 KB | 16 KB | 16 KB | 32 KB | 32 KB | 16 KB |
| SRAM / EEPROM | 1 KB / 512 B | 1 KB / 512 B | 1 KB / 512 B | 2 KB / 1 KB | 2 KB / 1 KB | 1 KB / 512 B |
| Max Clock Speed | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 8 MHz |
| LCD Controller | Yes | Yes | No | Yes | Yes | Yes |
| Supply Voltage Range | 2.7 V to 5.5 V | 1.8 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 1.8 V to 5.5 V |
| JTAG On-Chip Debug | Yes | Yes | Yes | Yes | Yes | Yes |
اہم امتیازی خصوصیات
- Integrated segment LCD controller (بمقابلہATMEGA165P-16MU)
- Official successor availability (بمقابلہATMEGA169PA-16MU)
- Flash headroom migration path (بمقابلہATMEGA325P-16MU)
ڈیزائن نوٹس
The 64-QFN (MLF) 9x9 mm package uses a central exposed die pad that must be connected to ground. Design the PCB land pattern with the exposed pad tied to a grid of ground vias (typically 5x5 or more); this pad is a primary ground connection, not an optional thermal feature. Under-pad vias also allow inspection-friendly solder control. Follow the IPC-compatible land pattern in the Microchip datasheet package drawing, and verify with X-ray on first-article assemblies because pad solder voids under QFN bodies are invisible optically.
Decouple every VCC/GND pad pair with 100 nF ceramic capacitors placed within 2 mm of the package, plus one bulk 10 uF per supply domain. The 2.7 V to 5.5 V operating range means the part tolerates 5 V rails, but flash write reliability degrades near the brown-out threshold - enable brown-out detection (BOD) via fuses at an appropriate level (e.g., 2.7 V for 5 V systems). When self-programming flash in-field, guarantee VCC stability per the datasheet's self-programming supply requirements.
JTAG shares pins with port C: if JTAGEN fuse is programmed (default), PC2-PC5 (TCK/TMS/TDO/TDI) cannot be used as general I/O unless JTAG is disabled. Additionally, RESET can be repurposed as a weak I/O via the RSTDISBL fuse, which permanently disables external programming - avoid this unless in-field reprogramming is never required. Finally, the 'P' die has been superseded by the ATmega169PA; for new designs start with the PA variant to secure supply continuity.
The LCD controller's frame frequency is configurable; choose a segment-driving frequency away from sensitive analog sampling windows of the 10-bit ADC to avoid display-drive coupling into conversions. Route LCD backplane and segment traces away from the ADC input traces and the crystal. Use the AVR noise-reduction sleep instruction immediately before each ADC conversion to reduce digital switching noise inside the die during sampling, a technique documented in Microchip AVR application notes.
تعمیل کی معلومات
Compliance statuses not stated in the provided web data; verify on the Microchip product page certificate of conformance. The standard ATMEGA169P is not marketed as AEC-Q100 qualified; consult Microchip for automotive-grade variants.
