Broadcom

BCM5221A4KPTG - 10/100 Ethernet Transceiver | Broadcom

MPN: BCM5221A4KPTG ✓ فعال
3.3 V Vdss 64-pin TQFP Package
MOQ: 1 |

BCM5221A4KPTG جائزہ

Broadcom BCM5221A4KPTG is a single-channel 10/100BASE-TX and 100BASE-FX Ethernet transceiver with a 3.3 V supply, designed for industrial networking equipment and embedded Ethernet systems. The device supports MII and RMII host interfaces and is supplied in a 64-pin TQFP package. Its 10BASE-T and 100BASE-TX support provides a practical path for legacy copper links, while the 100BASE-FX capability supports fiber-based point-to-point links where longer reach or electrical isolation is required.

An Ethernet PHY transceiver is an interface integrated circuit that converts digital Ethernet data into electrical or optical signaling for a network connection. In the hierarchy of networking electronics, the BCM5221 belongs to the Ethernet interface-controller and physical-layer transceiver class, where it sits between a host controller or processor and a 10/100BASE-TX copper medium or 100BASE-FX fiber medium.

The BCM5221 provides one Ethernet transceiver channel, 10 Mbps and 100 Mbps data-rate support, 3.3 V operation, and an industrial temperature range of -40°C to 85°C. Its MII and RMII interfaces support different host-controller architectures: MII provides separate parallel control and data paths, while RMII uses a reduced pin interface intended to simplify connections with compatible Ethernet controllers. The 64-pin TQFP package also provides sufficient pin count for dedicated media, clock, control, and power connections.

Broadcom positions the BCM5221 as a 10/100BASE-TX/FX mini-transceiver for copper and fiber connectivity. In a copper implementation, the PHY interfaces with magnetic components and an RJ45 network connector. In a fiber implementation, it interfaces with an external optical transceiver through its fiber-side signals. The host-side MII or RMII signals connect to an embedded processor, industrial controller, or dedicated Ethernet controller.

Typical uses include industrial Ethernet gateways, embedded control systems, printer controllers, set-top equipment, factory automation equipment, and legacy 10/100 network upgrades. The part is particularly relevant when an existing design supports 10 Mbps and 100 Mbps copper links but also requires a 100BASE-FX option. Product qualification should confirm all electrical, timing, and fiber-interface requirements for the target network.

For a new PCB, follow the Broadcom BCM5221 data sheet for the exact reference circuit, decoupling, clock, magnetics, resistor, and layout implementation. Preserve the specified MII or RMII interface arrangement, provide clean 3.3 V power, and account for the package thermal limits when placing the transceiver next to a switching regulator or processor.

This product page combines the manufacturer data sheet, device specifications, sourcing information, application guidance, and design considerations to support faster engineering evaluation. It also distinguishes documented functions from parameters that still require board-level confirmation, helping designers assess BCM5221A4KPTG for copper, fiber, industrial, and embedded Ethernet implementations.

کے لیے ڈراپ اِن متبادل BCM5221A4KPTG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں BCM5221A4KPTG (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Product Type.

Broadcom
Package: 48-pin QFN
Product Type: Single-port 10/100 Ethernet PHY transceiver
موازنہ کریں BCM5221A4KPTG →

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

BCM5221A4KPTG زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Single-channel 10/100BASE-TX/FX Ethernet transceiver
Transceiver Channel Count 1 channel
Copper Ethernet Standard 10BASE-T and 100BASE-TX
Fiber Ethernet Standard 100BASE-FX
Supported Data Rates 10 Mbps and 100 Mbps
Host Interface MII and RMII
Nominal Supply Voltage 3.3 V
آپریٹنگ درجہ حرارت رینج -40°C to 85°C
Maximum Junction Temperature 125°C
پیکیج 64-pin TQFP
ماؤنٹنگ ٹائپ Surface mount
Device Description 10/100BASE-TX/FX mini-transceiver
Ethernet Media Support Twisted-pair copper and 100BASE-FX fiber

BCM5221A4KPTG 64-pin tqfp پن کنفیگریشن گائیڈ

BCM5221A4KPTG (64-pin tqfp پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

BCM5221A4KPTG کے لیے 64-pin tqfp پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں BCM5221A4KPTG.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

BCM5221A4KPTG کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Ethernet Gateways, Embedded Control Systems, 100BASE-FX Fiber Links, Printer and Network Peripherals, Factory Automation Equipment, Legacy Network Upgrade Systems.

🏭

Industrial Ethernet Gateways

BCM5221A4KPTG fits industrial gateways that must bridge a 10/100 Mbps Ethernet network to an embedded controller. Its 10BASE-T and 100BASE-TX support covers legacy and Fast Ethernet copper links, while MII and RMII permit connection to either a parallel-interface controller or a more compact host interface. The 3.3 V supply integrates well with contemporary embedded processors, and the -40°C to 85°C operating range supports industrial equipment. The PHY should be placed near the magnetic isolation components and network connector, with its supply return and clock routing completed according to the Broadcom reference implementation.

🏭

Embedded Control Systems

BCM5221A4KPTG is suitable for embedded control systems requiring a dedicated 10/100BASE-TX network interface without integrating a complete Ethernet controller. Its 10 Mbps and 100 Mbps support allows compatibility with older management networks as well as modern Fast Ethernet infrastructure. RMII can reduce host-side wiring when supported by the processor, while MII remains available for established parallel-interface designs. With a 3.3 V supply and industrial-temperature capability, the device can serve machine controllers, building controllers, and production equipment, provided the host clocking, reset, magnetics, and isolation network follow the manufacturer application circuit.

🌐

100BASE-FX Fiber Links

BCM5221A4KPTG supports a 100BASE-FX fiber connection in addition to copper Ethernet, making it useful for equipment requiring longer point-to-point links or an optical network segment. The transceiver operates from 3.3 V and retains the same MII or RMII host-facing connection used by the copper-capable design. The fiber path must use a compatible external optical transceiver and the component arrangement specified in the Broadcom data sheet. Signal-integrity checks should cover the media-side interface, grounding, isolation boundaries, and host timing, while the -40°C to 85°C range supports temperature-controlled industrial installations.

🖥️

Printer and Network Peripherals

BCM5221A4KPTG can provide the physical layer for legacy printer, copier, and network-peripheral controllers that use 10/100BASE-TX. Support for both 10 Mbps and 100 Mbps improves compatibility with older shared networks and faster switched Ethernet installations. The single-channel architecture is appropriate when each peripheral requires one network port, and the 3.3 V supply is suitable for integration with embedded peripheral controllers. Designers should follow the manufacturer reference network for magnetic components and RJ45 connections, preserve the specified clock and reset behavior, and evaluate error-rate margin across temperature and cable-length conditions.

🏭

Factory Automation Equipment

BCM5221A4KPTG is appropriate for factory automation equipment that connects sensors, motion controllers, or process modules through a legacy 10/100 Mbps Ethernet network. Its -40°C to 85°C rating supports industrial environmental requirements, while MII and RMII interfaces offer flexibility with different controller generations. The device should be mounted near the connector and isolation network to minimize media-side routing sensitivity. Designers must maintain the specified decoupling, grounding, clocking, and magnetics arrangement and should account for conducted noise from nearby motors, contactors, and switching supplies.

🌐

Legacy Network Upgrade Systems

BCM5221A4KPTG supports upgrades that retain compatibility with 10 Mbps and 100 Mbps copper Ethernet networks while adding a 100BASE-FX option. This combination is useful in equipment where the host controller still uses an MII or RMII Ethernet interface but the physical layer must connect to copper and fiber media. The 3.3 V operating supply simplifies integration with existing controller rails, and the industrial temperature range enables use in less controlled equipment cabinets. Before substitution into an established design, verify every pin, supply rail, clock source, reset sequence, media-side component, and configuration detail against the manufacturer data sheet.

What is the BCM5221A4KPTG?
The BCM5221A4KPTG is a Broadcom single-channel 10/100BASE-TX/FX Ethernet transceiver operating from a 3.3 V supply. It supports 10 Mbps and 100 Mbps data rates, MII and RMII host interfaces, and a -40°C to 85°C industrial temperature range. The manufacturer data sheet identifies the device as a 10/100BASE-TX/FX mini-transceiver for copper and fiber network connections.
Where can I download the BCM5221A4KPTG datasheet PDF?
The BCM5221A4KPTG datasheet PDF is available from the official Broadcom document repository at docs.broadcom.com/doc/5221-DS07-405-RDS.pdf. The document is the primary reference for the 64-pin TQFP pin configuration, electrical characteristics, timing, media interfaces, and reference application information. Use the manufacturer document when assigning PCB nets or checking operating limits.
What Ethernet standards does BCM5221A4KPTG support?
BCM5221A4KPTG supports 10BASE-T and 100BASE-TX over twisted-pair copper and 100BASE-FX over fiber. Its data rates are 10 Mbps and 100 Mbps, according to the Broadcom BCM5221 data sheet. The device therefore supports both legacy 10BASE-T and fast Ethernet 100BASE-TX links while allowing a fiber option in the same transceiver family.
What is the BCM5221A4KPTG package and pin count?
BCM5221A4KPTG is packaged as a surface-mount 64-pin TQFP. A product listing identifies the package as 64-pin TQFP, while the Broadcom BCM5221 document contains the authoritative connection and pin-description tables. Because the complete pin map is not reproduced on this page, use the manufacturer data sheet when connecting power, clocks, MII or RMII signals, and media interfaces.
What supply voltage does BCM5221A4KPTG use?
BCM5221A4KPTG is designed for a 3.3 V supply. The manufacturer data sheet remains the controlling reference for minimum and maximum operating voltages, current limits, and power sequencing. Provide local high-frequency decoupling at the supply pins and route the power return path carefully to prevent digital or switching-regulator noise from disturbing the transceiver.
What is the operating temperature range of BCM5221A4KPTG?
BCM5221A4KPTG is specified for an operating temperature range of -40°C to 85°C. This industrial range supports use in factory automation, industrial controllers, communications equipment, and other products requiring operation beyond typical commercial-temperature limits. Validate the complete system enclosure and thermal performance, especially when the PHY is placed near a switching regulator.
Can BCM5221A4KPTG connect to a 100BASE-FX fiber link?
Yes, BCM5221A4KPTG includes support for 100BASE-FX in addition to 10BASE-TX copper operation. The fiber-side interface requires the external components and signal arrangement specified by the Broadcom data sheet, including a suitable optical transceiver path. Confirm optical-module compatibility, signal timing, and application-level configuration before releasing a production design.
What is the difference between MII and RMII on BCM5221A4KPTG?
MII and RMII are both host-side interfaces supported by BCM5221A4KPTG, but they organize the connection differently. MII uses separate parallel paths for transmit and receive data and control signals, while RMII reduces the interface to a more compact set of data and control signals. Choose the interface supported by the host Ethernet controller and implement the exact timing and pin assignment from the data sheet.
When should I choose BCM5221A4KPTG for an industrial Ethernet design?
Choose BCM5221A4KPTG when the design needs a 10/100 Mbps Ethernet interface, a 3.3 V supply, MII or RMII host connectivity, and operation from -40°C to 85°C. It is especially suitable for legacy industrial copper links and systems that also need 100BASE-FX. Confirm media-component selection, timing, thermal conditions, and production availability before final release.
Where can I buy BCM5221A4KPTG and check its current lead time?
Use the Request a Quote form on this page to request BCM5221A4KPTG pricing, current stock, minimum order quantity, and lead time. Quote requests are the appropriate commercial channel because component availability and order conditions can change quickly. Include your required quantity, date code preference, shipping destination, and target assembly schedule in the request.
What is the price of BCM5221A4KPTG?
Submit a BCM5221A4KPTG request through the Request a Quote form on this page for current unit pricing and volume-break terms. The quote can be tailored to your quantity, date-code preference, delivery destination, and production schedule. This approach provides current commercial terms without presenting a static price that could become obsolete.
Is BCM5221A4KPTG in stock?
Current BCM5221A4KPTG stock should be confirmed through the Request a Quote form on this page. Include the required quantity, acceptable date codes, target shipment date, and assembly location so the order response reflects practical delivery conditions. For production planning, request a lead-time estimate along with the availability confirmation.
What is the best drop-in replacement for BCM5221A4KPTG?
No complete pin-to-pin replacement for BCM5221A4KPTG has been established from the available manufacturer and cross-reference information. A valid replacement must retain the same 64-pin TQFP footprint, MII or RMII arrangement, 3.3 V supply, 10/100BASE-TX capability, and required 100BASE-FX behavior. Do not treat a same-speed Ethernet PHY in another package as a drop-in substitute.
Can BCM5221A4KPTGT replace BCM5221A4KPTG?
BCM5221A4KPTGT and BCM5221A4KPTG appear to be orderable suffix variants of the same Broadcom device family, but the suffix distinction should be confirmed against the Broadcom ordering guide. Do not select the alternate suffix solely from the abbreviated part number. Verify the exact package, lead-free status, shipping format, and manufacturer ordering information before treating it as interchangeable.
What is the best Broadcom equivalent for BCM5221A4KPTG?
No separate Broadcom equivalent is documented as a drop-in substitute for BCM5221A4KPTG. The most defensible same-family choices are orderable suffix variants only after their manufacturing and packaging codes are confirmed. A different Broadcom PHY should be considered only when its complete pinout, interface timing, media support, voltage, and package have been checked against the existing PCB.
What are the key BCM5221A4KPTG specifications engineers should know?
The principal BCM5221A4KPTG specifications are one 10/100BASE-TX/FX transceiver channel, 10 Mbps and 100 Mbps operation, 3.3 V supply, MII and RMII host interfaces, and operation from -40°C to 85°C. The Broadcom data sheet describes it as a 10/100BASE-TX/FX mini-transceiver, and product information identifies a 64-pin TQFP package. These points define the initial board-level compatibility screen.

کے لیے انجینئرنگ ریفرنس ڈیٹا BCM5221A4KPTG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose BCM5221A4KPTG when a design requires a 10/100 Mbps Ethernet physical layer, 3.3 V operation, MII or RMII host connectivity, and a -40°C to 85°C temperature range. It is especially useful for legacy industrial Ethernet products that must support both twisted-pair and 100BASE-FX media. Verify that the 64-pin TQFP footprint matches the existing PCB and that the selected magnetics, fiber interface, clocking, and reset arrangement follow the Broadcom reference design. No alternative is recommended solely on the basis of matching speed or Ethernet function; a true substitute must preserve the package, pinout, interface timing, media capability, and supply requirements. For an existing copper-only design, changing the PHY may also require software-driver and host-interface validation, so treat the replacement as a hardware and firmware integration project rather than a component-only substitution.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand Broadcom
Package 64-pin TQFP
Transceiver Channels 1 channel
Copper Ethernet Support 10BASE-T and 100BASE-TX
Fiber Ethernet Support 100BASE-FX
Supported Data Rates 10 Mbps and 100 Mbps
Host Interface MII and RMII
Supply Voltage 3.3 V
Operating Temperature -40°C to 85°C
Maximum Junction Temperature 125°C

اہم امتیازی خصوصیات

  • Supports both legacy copper Ethernet and fiber connectivity in one transceiver (بمقابلہNo validated drop-in alternative was identified)
  • Offers flexible host connectivity (بمقابلہNo validated drop-in alternative was identified)
  • Designed for extended-temperature industrial equipment (بمقابلہNo validated drop-in alternative was identified)
  • Supports two common 10/100 network data rates (بمقابلہNo validated drop-in alternative was identified)

ڈیزائن نوٹس

Follow the Broadcom BCM5221 reference layout for the 64-pin TQFP, including power placement, decoupling, clock routing, MII or RMII interfaces, and the copper or fiber media-side connections. Place the transceiver near the network isolation components and connector to minimize media-path trace length. Keep sensitive clock and data routes away from switch-mode power inductors and high-current return paths.

Decouple the 3.3 V supply locally and provide a quiet return connection to the device ground pins. The Broadcom data sheet should be used to determine the required capacitor type, voltage rating, effective capacitance, and placement. Avoid routing the PHY supply through a long shared trace, because supply ripple and impedance can affect transceiver operation and host-interface timing.

Implement the manufacturer's recommended clock and reset arrangement, and validate the MII or RMII timing against the connected Ethernet controller. Differential or high-speed media-side signals should follow the reference geometry and maintain the specified isolation boundary. Do not substitute arbitrary magnetics or fiber components; their electrical characteristics and interface arrangement must be compatible with the BCM5221 application circuit.

Estimate junction temperature from the device dissipation, package thermal resistance, and local board temperature before using the 125°C maximum junction-temperature limit as a design target. The 64-pin TQFP can receive heat through its leads and exposed routing area, but actual performance depends on the PCB copper and adjacent heat sources. Maintain airflow or thermal separation when the PHY is installed beside a switching regulator.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer data sheet states that the component is not designed, intended, or certified for military, nuclear, medical, mass transportation, aviation, navigation, pollution control, hazardous-substances management, or other high-risk applications. Detailed environmental and material-compliance declarations must be confirmed with Broadcom.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

bcm5221a4kptg datasheet broadcom bcm5221a4kptg BCM5221A4KPTG datasheet pdf BCM5221A4KPTG pinout BCM5221A4KPTG 64 pin TQFP BCM5221A4KPTG MII RMII BCM5221A4KPTG 10BASE-T 100BASE-TX BCM5221A4KPTG 100BASE-FX BCM5221A4KPTG replacement BCM5221A4KPTG equivalent BCM5221A4KPTG price BCM5221A4KPTG stock Broadcom BCM5221 Ethernet transceiver BCM5221A4KPTG application circuit

متعلقہ اجزاء اور اصطلاحات

Broadcom BCM5221 BCM5221A4KPTG BCM5221A4KPT BCM5221A4KPTGT Ethernet transceiver Ethernet PHY physical layer 10BASE-T 100BASE-TX 100BASE-FX Fast Ethernet MII RMII 3.3 V 10 Mbps 100 Mbps 64-pin TQFP TQFP package family surface mount industrial Ethernet fiber optic link network magnetics RJ45 connector temperature range
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں