Broadcom

BCM53128KQLEG - Gigabit Ethernet Switch | Broadcom

MPN: BCM53128KQLEG ✓ فعال
PQFP-256 Package EEPROM Memory
MOQ: 1 |

BCM53128KQLEG جائزہ

Broadcom BCM53128KQLEG is an unmanaged Gigabit Ethernet switch with a 256-pin PQFP package, integrated LoopDTech cable diagnostics, CableChecker functionality, discrete magnetics support, and EEPROM-based configuration. It is designed for cost-sensitive Ethernet systems that require multiport Gigabit connectivity without a dedicated management processor or complex switch configuration interface.

An unmanaged Gigabit Ethernet switch is a Layer 2 network device that automatically forwards Ethernet frames without operator-controlled VLAN, QoS, or routing functions. This simplifies installation in consumer, industrial, and embedded networks while reducing board space, firmware management, and system complexity compared with a fully managed switch controller.

The BCM53128KQLEG's headline capabilities include unmanaged Gigabit Ethernet switching, LoopDTech on/off switching with buzzer warning support, CableChecker cable diagnostics, discrete magnetics for lower-cost board designs, and EEPROM configuration for features such as jumbo-frame and LoopDTech enablement. These functions target practical copper-Ethernet equipment where diagnostics and flexible local configuration add value without requiring full network management.

The device uses a CMOS implementation and a PQFP-256 package. The large pin count provides access to multiple Gigabit Ethernet ports and associated control, configuration, power, and status signals, but it also demands careful PCB escape routing and multilayer board construction. Because the device is unmanaged, its operating behavior is primarily established through hardware connections and EEPROM configuration rather than runtime software control.

Typical uses include unmanaged office and residential Ethernet switches, gateway and set-top equipment, industrial Ethernet endpoints, IP camera networks, custom copper-network appliances, and embedded systems needing multiple Gigabit ports. For each design, confirm port count, media support, copper magnetics architecture, reference clock, EEPROM interface, and power requirements against the current manufacturer datasheet before schematic release.

A key design consideration is that unmanaged operation does not remove Ethernet hardware constraints. PCB trace geometry, via transitions, isolation gaps, return paths, magnetics placement, and thermal performance can still affect link stability and radiated emissions. Use the manufacturer's reference design and layout guidance when possible, and validate the complete magnetics and switch assembly for EMC compliance.

This page combines the manufacturer-datasheet feature summary, package identification, practical Ethernet design guidance, replacement analysis, and structured engineering comparisons to support faster component selection and PCB planning.

کے لیے ڈراپ اِن متبادل BCM53128KQLEG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں BCM53128KQLEG (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.

Broadcom
Package: 256-terminal HLFQFP
موازنہ کریں BCM53128KQLEG →

BCM53128VKQLEG

✅ ڈراپ-اِن
Broadcom
📦 PQFP-256
Multiport Gigabit Ethernet switch IC · 5 ports · 1000BASE-T Gigabit Ethernet · Unmanaged · Discrete magnetics · EEPROM · Yes · LoopDTech

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

BCM53128IQLEG

✅ ڈراپ-اِن
📦 PQFP-256
Listed unit weight is 0.873677 oz versus 2.491841 oz, approximately 64.9% lower, while primary functional parameters remain similar

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

BCM53128KQLEG زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type Unmanaged Gigabit Ethernet switch
Ethernet Standard Gigabit Ethernet
Switch Management Unmanaged
Cable Diagnostic Feature CableChecker
Link Diagnostics LoopDTech on/off switching with buzzer warning sound
Magnetics Architecture Discrete magnetics
Configuration Memory EEPROM
Jumbo Frame Configuration EEPROM-enabled
Process Technology CMOS
پیکیج PQFP-256
پن کی تعداد 256 pins
ماؤنٹنگ ٹائپ Surface mount

BCM53128KQLEG pqfp-256 پن کنفیگریشن گائیڈ

BCM53128KQLEG (pqfp-256 پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

BCM53128KQLEG کے لیے pqfp-256 پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں BCM53128KQLEG.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

BCM53128KQLEG کے لیے موزوں ہے 6 ایپلیکیشنs: Unmanaged Office Ethernet Switch, Residential Gateway Expansion, Industrial Ethernet Endpoint, IP Camera Network Appliance, Custom Copper Network Extender, Embedded OEM Ethernet Platform.

🌐

Unmanaged Office Ethernet Switch

The BCM53128KQLEG fits an unmanaged office switch because it automatically performs local Gigabit Ethernet frame forwarding while adding hardware-level link diagnostics. LoopDTech can identify loop conditions and support an on/off switching function with a buzzer warning, while CableChecker assists cable troubleshooting. Its unmanaged architecture avoids a management CPU and associated software stack, allowing a compact 256-pin PQFP design to serve as a multiport Ethernet switch. The implementation should follow the manufacturer's magnetics and layout guidance, particularly around copper pairs, isolation gaps, and return paths. Before release, confirm the exact port count, operating limits, clock requirements, and environmental range in the Broadcom data sheet.

🏠

Residential Gateway Expansion

BCM53128KQLEG is appropriate for a residential gateway or distribution box requiring additional unmanaged Gigabit Ethernet ports. Its local Layer 2 forwarding behavior provides Ethernet connectivity without a management processor, helping simplify firmware and user configuration. EEPROM support allows board-specific options such as jumbo-frame or LoopDTech behavior, while discrete magnetics offer an implementation path for cost-conscious copper Ethernet ports. In this application, the board must still handle Ethernet isolation, surge exposure, connector grounding, and thermal conditions. Confirm switch and magnetics interfaces, reference-clock arrangement, and power sequencing from the manufacturer documentation before schematic sign-off.

🏭

Industrial Ethernet Endpoint

The BCM53128KQLEG can support an unmanaged industrial Ethernet endpoint when a product needs several local Gigabit connections without switch-management overhead. LoopDTech and CableChecker add practical diagnostics for field cable and loop troubleshooting, which is useful in equipment installed away from technical staff. The discrete-magnetics architecture permits a cost-conscious implementation, but industrial qualification also depends on temperature, isolation, EMC, and supply requirements that must be confirmed in the current data sheet. Use the manufacturer reference layout to control differential-pair geometry and maintain suitable isolation around network connectors.

🎥

IP Camera Network Appliance

BCM53128KQLEG is suitable for an IP camera or surveillance appliance that requires several managed-endpoint Ethernet connections handled by a dedicated unmanaged switch IC. Local frame forwarding avoids introducing a software-managed switching layer into the camera's embedded controller, leaving more processing capacity for image transport and encoding. LoopDTech can help expose incorrect network configurations, and CableChecker supports cable diagnostics during installation or service. The PQFP-256 footprint requires careful layer allocation for high-speed copper pairs and supply distribution. Validate PHY configuration, magnetics selection, thermal limits, and EMI performance for the complete camera enclosure.

📶

Custom Copper Network Extender

BCM53128KQLEG can form the Ethernet switching core of a custom network extender or compact Ethernet distribution appliance. Its unmanaged operation permits automatic learning and forwarding of Gigabit frames without a network operating system, while EEPROM configuration supports repeatable product-specific behavior. LoopDTech is particularly relevant when a product may be deployed in unknown customer networks where loop conditions need recognition. The discrete-magnetics approach supports board-level Ethernet implementation, although connector layout and isolation must be designed carefully to preserve signal integrity and compliance. Validate port mapping, cable-length behavior, clocking, and startup requirements using the Broadcom documentation.

🖥️

Embedded OEM Ethernet Platform

BCM53128KQLEG suits an embedded OEM platform that needs a dedicated multiport Ethernet switching function alongside a host processor. The switch IC can handle local frame forwarding independently of the host, reducing the protocol-processing burden on an embedded controller. EEPROM-based configuration enables repeatable deployment of features such as LoopDTech and jumbo-frame behavior, while the broad package exposes the required port and configuration connections. The large PQFP-256 land pattern requires multilayer routing, careful power-plane segmentation, and verification of every pin assignment. Before committing to the design, confirm whether the exact orderable suffix matches the required configuration and review lifecycle continuity.

تجویز کردہ پروڈکٹس کا خلاصہ

BCM53128VKQLEG Broadcom استعمال ہوتا ہے: Unmanaged Office Ethernet Switch, Residential Gateway Expansion, Industrial Ethernet Endpoint, IP Camera Network Appliance, Custom Copper Network Extender, Embedded OEM Ethernet Platform BCM53128IQLEG Same-family functionally similar switch candidate استعمال ہوتا ہے: Unmanaged Office Ethernet Switch, Residential Gateway Expansion, Industrial Ethernet Endpoint, IP Camera Network Appliance, Custom Copper Network Extender, Embedded OEM Ethernet Platform
What is the Broadcom BCM53128KQLEG?
The Broadcom BCM53128KQLEG is an unmanaged Gigabit Ethernet switch IC packaged in a 256-pin PQFP. According to the Broadcom BCM53128 datasheet, it provides unmanaged multiport Gigabit Ethernet switching, LoopDTech link diagnostics, CableChecker functionality, discrete-magnetics support, and EEPROM configuration for options such as jumbo frames and LoopDTech. Its role is to provide local Layer 2 Ethernet connectivity without a management processor.
Where can I download the BCM53128KQLEG datasheet PDF?
The BCM53128KQLEG datasheet PDF is available from the Broadcom document link hosted by Mouser and from the BCM53128 datasheet listing on Mouser. The manufacturer data sheet describes the device as a CMOS, unmanaged Gigabit Ethernet switch with LoopDTech, CableChecker, discrete magnetics, and EEPROM configuration. Use the pin-description table and package drawing in that document before assigning PCB tracks.
Where to buy BCM53128KQLEG online?
The BCM53128KQLEG can be ordered through the Request a Quote form on this page, which is the appropriate route for current price, stock, and lead-time confirmation. The Broadcom manufacturer documentation and distributor listing identify the exact BCM53128KQLEG orderable MPN. Confirm the package, quantity, and delivery requirements when submitting the request.
What is the price of BCM53128KQLEG?
Current BCM53128KQLEG pricing is shown through the Request a Quote form on this page because commercial terms and availability can change. The part is an unmanaged Gigabit Ethernet switch IC in a PQFP-256 package. Submit the required quantity and shipment destination to obtain a current quotation without relying on an outdated market-price figure.
What is the lead time for BCM53128KQLEG?
The current lead time for BCM53128KQLEG should be confirmed through the Request a Quote form on this page. Lead time depends on order quantity, scheduled production, packaging configuration, and current channel inventory. The exact ordering information for this Broadcom device can be included with the quote request to establish a delivery plan.
Is BCM53128KQLEG in stock?
BCM53128KQLEG availability is confirmed through the Request a Quote form on this page. Because inventory can change rapidly and this product is commonly handled as an orderable interface IC, request the current stock position with the required quantity. The quote response should also identify the package configuration and expected shipment timing.
BCM53128KQLEG vs BCM53128VKQLEG - which is better?
BCM53128VKQLEG is the closer functional match to BCM53128KQLEG because a published sequential comparison reports identical performance profiles with no measurable differences in the primary technical parameters. Both are Broadcom BCM53128-family unmanaged Gigabit Ethernet switch options in the same PQFP-256 package. Confirm ordering suffixes, configuration details, and current lifecycle status before treating either device as a production replacement.
What is the difference between BCM53128KQLEG and BCM53128IQLEG?
BCM53128IQLEG is functionally similar to BCM53128KQLEG, but a published comparison identifies unit weight as the primary stated difference. The comparison reports 0.873677 oz for BCM53128IQLEG versus 2.491841 oz for BCM53128KQLEG, a decrease of approximately 64.9% in listed unit weight. Verify pinout, electrical limits, and orderable configuration before using it as a direct replacement.
When should I choose BCM53128KQLEG over BCM53128VKQLEG?
Choose BCM53128KQLEG when it is the confirmed Broadcom orderable configuration for the intended design, while treating BCM53128VKQLEG as the functionally equivalent alternative. A comparison between the two identifies no measurable difference in the primary technical parameters, and both use the PQFP-256 package. The final selection should account for current lifecycle status, configuration details, and procurement conditions.
Is BCM53128KQLEG suitable for an unmanaged industrial Ethernet switch?
BCM53128KQLEG is suitable for an unmanaged industrial Ethernet switch when its complete electrical and environmental requirements are met. According to the Broadcom BCM53128 datasheet, it supports unmanaged Gigabit Ethernet switching, LoopDTech diagnostics, CableChecker, discrete magnetics, and EEPROM configuration. Industrial use also requires validation of operating temperature, isolation, EMC performance, and long-term supply availability.
What is the best drop-in replacement for BCM53128KQLEG?
BCM53128VKQLEG is the best-supported drop-in candidate identified for BCM53128KQLEG because the two use the same PQFP-256 package and a published comparison reports identical primary performance profiles. BCM53128IQLEG is another close candidate, although its listed unit weight differs materially from BCM53128KQLEG. Validate pinout, programming method, configuration, and lifecycle status before approval.
Can BCM53128VKQLEG replace BCM53128KQLEG?
BCM53128VKQLEG can serve as a candidate replacement for BCM53128KQLEG because it has the same PQFP-256 package and was reported to have an identical primary performance profile. A replacement still requires confirmation of pin functions, power sequencing, EEPROM behavior, configuration defaults, and current product status. The published comparison establishes functional similarity, not automatic qualification for every production program.
What is the best Broadcom equivalent for BCM53128KQLEG?
BCM53128VKQLEG is the closest Broadcom equivalent identified for BCM53128KQLEG because the published comparison reports no measurable performance difference and confirms the same PQFP-256 package. BCM53128IQLEG is another family candidate with a different listed unit weight. Use the manufacturer pin table and current lifecycle information to determine whether the suffix change affects configuration or production qualification.
What can replace BCM53128KQLEG?
BCM53128VKQLEG is the leading replacement candidate for BCM53128KQLEG, with BCM53128IQLEG providing a second same-family option. Both candidates were identified by direct comparisons of the BCM53128 family, and the V suffix showed no measurable primary-parameter differences from the K suffix. A production release should still verify pin compatibility, configuration EEPROM requirements, environmental limits, and current supply status.
What are the key specifications of BCM53128KQLEG that engineers should know?
BCM53128KQLEG is a CMOS unmanaged Gigabit Ethernet switch IC in a 256-pin PQFP package. Key features identified by the Broadcom BCM53128 datasheet are multiport unmanaged Gigabit Ethernet switching, LoopDTech on/off switching with buzzer warning, CableChecker diagnostics, discrete-magnetics support, and EEPROM configuration for jumbo-frame and LoopDTech options. Confirm port count, voltage rails, clocking, and environmental limits in the current datasheet.
Where can I find the BCM53128KQLEG pinout?
The BCM53128KQLEG pinout is in the pin-description table and package drawing of the Broadcom BCM53128 manufacturer data sheet. The package is identified as PQFP-256, so a complete assignment requires all 256 numbered pins, including supply, ground, Ethernet, configuration, clock, and no-connect entries. Use the manufacturer drawing rather than a generic PQFP template when routing the board.

کے لیے انجینئرنگ ریفرنس ڈیٹا BCM53128KQLEG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose BCM53128KQLEG when it is the confirmed orderable Broadcom configuration for a new unmanaged Gigabit Ethernet design. BCM53128VKQLEG is the strongest replacement candidate because a published comparison reports identical primary performance and the same PQFP-256 package. Choose BCM53128IQLEG when its distinct listed unit weight and orderable configuration meet the assembly or supply requirements, but verify configuration and lifecycle details because that weight difference indicates a different packaged variant. For either alternative, confirm port mapping, EEPROM configuration, LoopDTech behavior, clocking, power rails, and thermal limits in the current manufacturer documentation. No cross-brand drop-in replacement is established here because functional equivalence, package geometry, pinout, PHY behavior, and configuration must all match; changing vendors without those checks can create interoperability and EMC risks.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ BCM53128VKQLEG BCM53128IQLEG
Package PQFP-256 PQFP-256 PQFP-256
Brand Broadcom Broadcom Broadcom
Device Category Unmanaged Gigabit Ethernet switch Unmanaged Gigabit Ethernet switch Unmanaged Gigabit Ethernet switch
Primary Performance Profile Baseline Identical performance profile; no measurable differences detected High similarity across primary technical parameters
Cable Diagnostic Features LoopDTech and CableChecker BCM53128-family feature set BCM53128-family feature set
Magnetics Architecture Discrete magnetics BCM53128-family feature set BCM53128-family feature set
Configuration Method EEPROM BCM53128-family feature set BCM53128-family feature set

اہم امتیازی خصوصیات

  • Closest identified performance match (بمقابلہBCM53128VKQLEG)
  • Identical package family (بمقابلہBCM53128VKQLEG)
  • Close alternate with a lighter listed unit weight (بمقابلہBCM53128IQLEG)

ڈیزائن نوٹس

Use the Broadcom reference layout for the PQFP-256 footprint and verify every pin against the current manufacturer pin-description table. The 256-pin package offers ample routing access, but Ethernet differential pairs still require short, symmetrical paths, appropriate impedance control, and continuous return references. Place input and output decoupling close to the relevant supply pins, keep the exposed routing clear of long copper structures where the package drawing requires it, and reserve multilayer construction for the high-speed copper interfaces.

Design the discrete-magnetics Ethernet interface as a controlled transmission-line system rather than connecting switch pins directly to connectors. Maintain the impedance and pair-length relationships specified by the switch and magnetics documentation, minimize layer transitions, and provide a continuous ground reference beneath each pair. Keep copper away from isolation barriers and connector entry points, and validate the complete switch, magnetics, connector, and cable assembly with Ethernet compliance testing.

Do not assume that a same-family suffix is automatically production-equivalent even when its package and primary parameters match. Check startup behavior, EEPROM defaults, LoopDTech and CableChecker behavior, reference-clock requirements, power sequencing, and pin multiplexing for BCM53128VKQLEG or BCM53128IQLEG. Confirm the exact ordering code, lifecycle status, and application qualification before releasing a replacement to manufacturing.

Unmanaged switching reduces software complexity but does not eliminate electromagnetic-interference risks from high-speed Ethernet edges, magnetics, buzzer circuitry, or long power loops. Place network magnetics close to the connectors, maintain separation from noisy switching nodes, route high-current return paths away from sensitive Ethernet circuitry, and test radiated and conducted emissions in the final enclosure. The LoopDTech buzzer output, if used, also needs suitable filtering and enclosure treatment.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the cited pages. AEC-Q100 qualification is not stated for this Ethernet switch.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

BCM53128KQLEG datasheet BCM53128KQLEG pinout BCM53128KQLEG datasheet pdf BCM53128KQLEG equivalent BCM53128KQLEG replacement BCM53128KQLEG cross reference BCM53128KQLEG vs BCM53128VKQLEG BCM53128KQLEG price BCM53128KQLEG stock Broadcom BCM53128KQLEG BCM53128KQLEG PQFP-256 BCM53128KQLEG unmanaged switch

متعلقہ اجزاء اور اصطلاحات

Broadcom BCM53128KQLEG BCM53128VKQLEG BCM53128IQLEG BCM53128 Gigabit Ethernet switch unmanaged switch Ethernet switch controller Layer 2 switching network interface controller integrated circuit semiconductor LoopDTech CableChecker discrete magnetics EEPROM jumbo frame CMOS PQFP-256 QFP package family surface-mount package Ethernet magnetics network diagnostics
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں