ROHM Semiconductor

BD3808AFS-E2 22-SOP Audio Processor | ROHM Semiconductor

MPN: BD3808AFS-E2 ✓ فعال
22SOP Package
MOQ: 1 |

BD3808AFS-E2 جائزہ

ROHM Semiconductor BD3808AFS-E2 is an integrated audio processor supplied in a 22-pin SOP package and handled as a tape-and-reel component. The manufacturer identification associates the device with the BD3808 series and describes it as an IC audio processor, placing it within the broader category of audio and sound-processing semiconductors. Its 22-pin surface-mount package supports compact circuit layouts while providing separate connections for the signal-processing functions, control interface, supply rails, and external audio-network connections defined by the device architecture.

An audio processor is a specialized type of signal-processing integrated circuit used to manage functions within an audio signal path. Its general hierarchy is audio processor, audio IC, signal-processing IC, and semiconductor. Unlike a simple passive filter, an active audio processor can combine multiple analog, digital, control, or mixed-signal operations in one package. The exact signal topology and supported functions for BD3808AFS-E2 must be established from the manufacturer datasheet before circuit design begins.

The verified product identity establishes the BD3808AFS-E2 ordering code, 22SOP case, tape-and-reel shipping format, and ROHM Semiconductor manufacturer. The suffix E2 identifies the orderable configuration, but the presence of the suffix alone does not establish electrical limits, temperature grade, supported audio formats, or performance figures. Those device-specific parameters require confirmation in the manufacturer datasheet rather than inference from the catalog description.

BD3808AFS-E2 is intended for manufacturers integrating a dedicated audio-processing stage into home audio, consumer electronics, communication equipment, and other sound-system products. Its integrated role can simplify a design when several closely related signal operations must be coordinated in one controlled package. The 22-pin SOP format also makes it suitable for surface-mount assembly processes that do not require a fine-pitch BGA or QFN land pattern.

A correct implementation depends on careful review of the pin-description table, recommended application circuit, external component values, and decoupling requirements in the manufacturer datasheet. Designers should preserve the exposed land pattern and pin numbering of the 22SOP package, route audio signals according to the reference layout, and keep sensitive analog paths physically separated from noisy return-current paths where the application guidance permits.

This product page consolidates the verified ordering identity, package information, current sourcing links, and engineering selection guidance. It also distinguishes confirmed package-level facts from electrical details that must be read from the authoritative manufacturer datasheet, helping engineers create a reliable procurement and design-review record for BD3808AFS-E2.

کے لیے ڈراپ اِن متبادل BD3808AFS-E2 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

BD3808AFS-E2 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type IC Audio Processor
Manufacturer ROHM Semiconductor
Series BD3808
Orderable Part Number BD3808AFS-E2
Package Type 22SOP
Total Pin Count 22 pins
ماؤنٹنگ ٹائپ Surface Mount
Shipping Package Tape & Reel (TR)
Manufacturer Description IC AUDIO PROCESSOR 22SOP
Original Manufacturer Name LAPIS Technology

BD3808AFS-E2 tape & reel (tr) پن کنفیگریشن گائیڈ

BD3808AFS-E2 (tape & reel (tr) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

BD3808AFS-E2 کے لیے tape & reel (tr) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں BD3808AFS-E2.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

BD3808AFS-E2 کے لیے موزوں ہے 6 ایپلیکیشنs: Home Audio Signal Processing, Digital Audio Source Products, Communication Equipment Audio Front Ends, Consumer Audio Signal Conditioning, Audio Interface and Control Boards, Industrial Audio Monitoring Equipment.

🎧

Home Audio Signal Processing

BD3808AFS-E2 can serve as the dedicated audio-processing element in a home-audio product when the manufacturer datasheet confirms that its available functions match the required signal path. The confirmed 22SOP package provides a surface-mount integration point for a board containing analog audio stages and supporting controls. Engineers should use the reference application circuit to determine suitable input and output connections, then validate channel routing and signal performance in the completed preamplifier or receiver. The principal benefit of integrating these functions in one 22-pin device is centralized audio-signal handling, while the principal design constraint is strict adherence to the documented pin and external-component requirements.

📱

Digital Audio Source Products

BD3808AFS-E2 is appropriate for evaluation in a digital audio source, such as a network player, optical player, or compact source component, only if its control and audio-interface characteristics support the selected architecture. The 22SOP package allows placement alongside digital-interface circuitry without requiring a fine-pitch land pattern. The key engineering step is to map the device’s 22 pins and its documented processing functions against the source subsystem before committing the PCB. Prototype evaluation should check signal integrity, control sequencing, grounding, and the influence of adjacent digital circuitry. The manufacturer datasheet and recommended circuit remain the authoritative basis for external filtering, supply connections, and component selection.

🌐

Communication Equipment Audio Front Ends

BD3808AFS-E2 may fit a communication-equipment audio front end when the required interface, signal conditioning, and level-control functions are confirmed by its manufacturer datasheet. Its 22SOP package is practical for compact, surface-mount equipment and supports placement near the relevant analog circuitry. Designers should minimize the distance from supported audio nodes to the processor while observing the layout guidance for sensitive analog signals. Input range, operating voltage, control method, and output behavior must be checked against the voice or data-audio architecture. Bench validation should include representative signal levels and noise measurements because the catalog category alone does not define performance or channel capability.

🔧

Consumer Audio Signal Conditioning

BD3808AFS-E2 can be evaluated for consumer-audio signal conditioning when the required filtering, mixing, or level-control operations are documented for the device. The confirmed 22SOP package fits conventional surface-mount assembly and provides a defined 22-terminal interface for implementation in compact electronics. Correct use requires assigning every signal and supply pin from the manufacturer pin table, applying the specified bypass capacitors, and observing the reference grounding strategy. Evaluate the design with both full-scale and low-level audio to determine whether the documented behavior meets the product requirements. This application benefits from centralized audio processing but remains dependent on careful analog layout and validated external component values.

🖥️

Audio Interface and Control Boards

BD3808AFS-E2 is a candidate for a dedicated audio interface board when its documented processing functions align with the board’s signal routing and control requirements. The 22SOP package is particularly convenient for multilayer boards because it can be placed alongside analog components while preserving conventional component spacing. The board design should follow the manufacturer reference layout, especially for power and ground connections, and should keep high-current return paths away from sensitive audio traces. Before release, compare all 22 pins against the proposed schematic and verify the reel orientation against the package drawing. This approach creates a repeatable module-level assembly around the processor and simplifies broader product integration.

🏭

Industrial Audio Monitoring Equipment

BD3808AFS-E2 may be considered in industrial audio-monitoring equipment if its documented operating limits and audio functions suit the monitored signal range. The 22SOP surface-mount package supports automated production and compact controller boards used in factory monitoring systems. Because the available catalog record does not state operating voltage, temperature range, or audio performance, qualification must begin with the manufacturer datasheet and end with circuit-level testing. Engineers should use the reference component values, verify supply sequencing and grounding, and evaluate the assembly across the expected ambient and signal conditions. The processor can reduce discrete signal-handling complexity only when its internal behavior matches the monitoring task exactly.

What is BD3808AFS-E2?
BD3808AFS-E2 is a ROHM Semiconductor IC audio processor in a 22-pin SOP package. According to the manufacturer datasheet and catalog identity, the device is intended to perform integrated audio signal-processing functions rather than serving as a passive component. It is supplied in a tape-and-reel format for automated surface-mount assembly. Before selecting it for a new design, consult the manufacturer datasheet for the supported functions, electrical limits, pin descriptions, and recommended external circuitry.
What package does BD3808AFS-E2 use?
BD3808AFS-E2 uses a 22-pin SOP surface-mount package, identified in product listings as 22SOP. The package contains 22 numbered terminals and is supplied on tape and reel. Because no compatible package in the canonical diagram library is represented, the package visual is shown with a generic footprint. Confirm the exact body size, lead pitch, pin-one orientation, and soldering land pattern from the ROHM Semiconductor manufacturer datasheet before releasing artwork or placing a PCB assembly order.
Where can I download the BD3808AFS-E2 datasheet PDF?
The BD3808AFS-E2 datasheet should be obtained from the ROHM Semiconductor product page or the linked technical-document search result, which points to the PDF associated with the exact ordering code. The available catalog record identifies a 42 KB, four-page PDF for BD3808AFS-E2. Verify the document header and ordering code after opening it. The PDF is the controlling source for pin functions, recommended application values, electrical characteristics, dimensions, and handling requirements.
Where can I find the BD3808AFS-E2 pinout?
The authoritative BD3808AFS-E2 pinout is in the pin-description table and package drawing in the ROHM Semiconductor manufacturer datasheet. The device has 22 pins in its 22SOP package, but the individual terminal names cannot be reconstructed safely from the catalog description alone. Use the datasheet numbering diagram when assigning supply, ground, control, and audio-signal connections. Treat the generic package visual as orientation guidance only, not as a substitute for the manufacturer pin table.
Is BD3808AFS-E2 an audio processor IC?
Yes, BD3808AFS-E2 is identified as an IC audio processor with 22SOP packaging. This places it within the audio IC and signal-processing IC hierarchy. An audio processor integrates one or more signal operations into a dedicated package, but the exact processing chain for BD3808AFS-E2 is not established by the short catalog description. Review the manufacturer datasheet to determine its supported channels, control registers or pins, analog sections, and recommended signal topology.
What are the key specifications of BD3808AFS-E2 that engineers should know?
The confirmed engineering facts for BD3808AFS-E2 are its ROHM Semiconductor origin, BD3808-series identity, 22SOP package, 22 terminals, surface-mount construction, and tape-and-reel configuration. The manufacturer datasheet is the required source for operating voltage, temperature limits, signal performance, control methods, and recommended external components. Confirm those electrical values before power-up or PCB release. The package count is sufficient to identify the physical assembly format but does not by itself establish performance.
Where to buy BD3808AFS-E2 online?
Use the Request a Quote form on this page to request BD3808AFS-E2 by its exact ordering code, ROHM Semiconductor, and 22SOP tape-and-reel configuration. The form is the appropriate route for current commercial availability, quantity requirements, and lead time. Confirm whether the requested configuration is the 22SOP TR variant and whether any trace or inspection requirements apply. Current stock levels and lead time should be confirmed during quotation rather than inferred from a historical catalog record.
What is the price of BD3808AFS-E2?
Current BD3808AFS-E2 pricing should be obtained through the Request a Quote form on this page. The form can confirm quantity breaks, manufacturer lead time, and the correct tape-and-reel ordering configuration. Do not rely on pricing attached to a different package suffix, reel code, or unreeled version. For engineering records, specify BD3808AFS-E2, ROHM Semiconductor, and 22SOP TR packaging when requesting the quotation so the response corresponds to the intended assembled part.
What is the lead time for BD3808AFS-E2?
The current lead time for BD3808AFS-E2 should be confirmed through the Request a Quote form on this page. Lead time can depend on manufacturer inventory, lot allocation, inspection requirements, and the requested shipment quantity. State the required quantity and the 22SOP tape-and-reel configuration in the request. For production planning, also discuss any demand forecast, scheduled delivery, and lot traceability requirements before committing the component to the assembly schedule.
Is BD3808AFS-E2 in stock?
BD3808AFS-E2 should be treated as a quotation item until current inventory is confirmed through the Request a Quote form on this page. Current distributor records show that the part has been listed for procurement, but a catalog listing does not guarantee a specific stock quantity at the moment of inquiry. Include your required quantity, delivery date, and packaging preference with the request. The exact MPN BD3808AFS-E2 and its 22SOP TR configuration should appear on the quotation.
What can replace BD3808AFS-E2?
No confirmed drop-in replacement for BD3808AFS-E2 can be identified from the available manufacturer and cross-reference records. A genuine replacement must match the 22SOP footprint, pin functions, supply requirements, control interface, and internal audio signal behavior. Use the Request a Quote form on this page to ask for an availability or lifecycle review rather than accepting an unspecified cross-reference. Any proposed substitute should be checked against the manufacturer datasheet before it is treated as pin-to-pin compatible.
Is BD3808AFS-E2 the same as another BD3808 ordering code?
BD3808AFS-E2 is a specific ROHM Semiconductor orderable configuration associated with a 22SOP tape-and-reel package. Other BD3808 codes may represent different package, temperature, or shipment configurations, so their ordering codes are not automatically interchangeable. Verify every suffix against the manufacturer ordering guide. For an equivalent comparison, request a written pin-and-parameter comparison for the exact alternative; the 22SOP package name alone is not enough to establish drop-in compatibility.
When should I choose BD3808AFS-E2 over another audio processor?
Choose BD3808AFS-E2 when its documented audio architecture, electrical limits, and control interface satisfy the target design and when the 22SOP package fits the existing manufacturing process. The part should not be selected solely from the generic description “IC audio processor.” Review the manufacturer datasheet for channel count, signal routing, control method, supply range, and reference application. If no alternative has equally documented compatibility, retaining the qualified original is generally safer than using an unverified substitute.
Is BD3808AFS-E2 suitable for a home audio product?
BD3808AFS-E2 can be considered for a home-audio design only after its manufacturer datasheet confirms that its documented processing functions match the product’s signal chain. The confirmed facts are its audio-processor role and 22SOP package, while channel count, noise performance, distortion, control method, and supply limits remain device-specific. Use the datasheet’s reference circuit to evaluate compatibility with microphones, amplifiers, speakers, and analog conversion stages, then validate the complete design acoustically.
What is the best cross-brand equivalent for BD3808AFS-E2?
No cross-brand equivalent is established as a verified drop-in replacement for BD3808AFS-E2. A defensible equivalent must use the same 22SOP land pattern and preserve every relevant pin function, supply connection, control behavior, and audio-processing characteristic. Generic cross-reference tools can identify parametric candidates, but their output alone does not prove compatibility. Request a quotation for the original part and require any proposed alternative to be documented against the exact BD3808AFS-E2 manufacturer datasheet.
How should BD3808AFS-E2 be handled during PCB assembly?
BD3808AFS-E2 should be assembled using the manufacturer’s 22SOP reflow and handling instructions, including the specified package orientation, land pattern, solder profile, and MSL handling requirements. Keep the 22-pin land pattern consistent with the datasheet drawing because the generic package visual does not define body dimensions or lead pitch. Use the supplier’s tape-and-reel format in the placement system, and inspect the first assembled units for bridging across the closely spaced SOP leads.

کے لیے انجینئرنگ ریفرنس ڈیٹا BD3808AFS-E2 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose BD3808AFS-E2 when its manufacturer-documented audio-processing functions, control interface, electrical limits, and 22SOP footprint match the target circuit. Its confirmed attributes are the ROHM Semiconductor BD3808 identity, 22SOP package, 22 terminals, and tape-and-reel format. The package is convenient for conventional surface-mount assembly, but it should not be selected merely from the generic “audio processor” description. Before committing, review the datasheet’s pin map, reference application, external components, supply requirements, and operating-temperature limits. No verified same-package replacement is established, so retaining BD3808AFS-E2 is preferable to using an unverified cross-reference when the original remains procurable. For a redesign, compare a new processor against every function and signal requirement rather than comparing package names alone.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand ROHM Semiconductor
Package 22SOP
Pin Count 22 pins
Product Type IC Audio Processor
Series BD3808
Shipping Format Tape & Reel (TR)
Mounting Type Surface Mount

ڈیزائن نوٹس

Create the PCB land pattern directly from the 22SOP package drawing in the manufacturer datasheet rather than scaling a generic 22-pin drawing. Confirm body length, lead pitch, toe geometry, pin-one position, and courtyard clearance before artwork release. Maintain the recommended solder-mask and paste-land configuration, and verify that the tape-and-reel orientation matches the package marking on the PCB. A small land-pattern discrepancy can create solder bridging across the SOP leads and also affects first-pass inspection.

Follow the manufacturer reference layout for the audio signal path and power connections. Keep sensitive audio traces short, route return currents continuously, and place any required bypass capacitors close to the associated device pins. Avoid routing digital clocks, relay-control edges, or switching-node traces beneath the supported analog nodes. Because the exact pin roles must be read from the pin-description table, do not infer signal direction or supply pins from the 22-pin count alone. Review the completed layout against the application-circuit diagram before fabrication.

Do not substitute a similarly named BD3808 code without checking its complete ordering suffix, package, temperature grade, and function set. The confirmed catalog identity is BD3808AFS-E2 in 22SOP tape-and-reel packaging; a different suffix may change assembly or electrical conditions. Likewise, a generic parametric cross-reference match is not evidence of pin compatibility. Validate any proposed replacement against the exact ROHM Semiconductor datasheet, including pin functions, supply limits, control behavior, and the recommended external circuit.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

A catalog result includes a RoHS field, but its displayed value is not a recognized compliance statement. RoHS, REACH, automotive qualification, lead-free status, halogen-free status, and conflict-minerals status must be confirmed from ROHM Semiconductor documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-11 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

BD3808AFS-E2 datasheet BD3808AFS-E2 pinout BD3808AFS-E2 datasheet pdf BD3808AFS-E2 equivalent BD3808AFS-E2 replacement BD3808AFS-E2 cross reference BD3808AFS-E2 22SOP pinout BD3808AFS-E2 application circuit ROHM BD3808AFS-E2 BD3808AFS-E2 price BD3808AFS-E2 stock BD3808AFS-E2 schematic

متعلقہ اجزاء اور اصطلاحات

ROHM Semiconductor BD3808AFS-E2 BD3808 series LAPIS Technology audio processor audio IC signal-processing IC semiconductor 22SOP package SOP package family surface mount SMD 22-pin package tape and reel analog audio processing audio signal path power supply ground connection RoHS REACH AEC-Q100 MSL handling home audio communication equipment industrial audio monitoring
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں