DSPIC33CK128MC105T-I/PT - 100MHz 16-bit DSC 128KB Flash | Microchip
MPN: DSPIC33CK128MC105T-I/PT ✓ فعالDSPIC33CK128MC105T-I/PT جائزہ
A Digital Signal Controller combines the computational throughput of a DSP with the peripheral integration and interrupt responsiveness of a microcontroller. Within the power-management hierarchy, the dsPIC33CK family sits above basic MCUs and below application processors, making it a common choice where deterministic closed-loop control must execute at microsecond timescales, such as field-oriented motor control and switch-mode power conversion.
Key differentiating features include the single 100 MHz dsPIC DSC core with DSP-enhanced instruction set, 128 KB (128K x 8) of self-programmable Flash, 16 KB of data RAM, 39 general-purpose I/O pins, and an operating voltage window of 3.0 V to 3.6 V. The integrated op-amps can buffer current-sense signals ahead of the 12-bit ADC, while dual 12-bit DACs support waveform generation and sensor-signal reconstruction.
Architecturally, the device uses a modified Harvard pipeline with dedicated DSP multiply-accumulate hardware, enabling single-cycle MAC operations critical for filter kernels and control loops in digital power and motor drive algorithms. The high-resolution PWM module provides fine edge positioning for LLC, totem-pole PFC, and synchronous buck topologies.
Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC), solar micro-inverters, battery chargers, and industrial embedded control systems requiring deterministic 16-bit DSP performance.
Design consideration: verify that the 3.0-3.6 V supply rail is regulated and decoupled per the manufacturer datasheet before committing the PCB layout, and confirm the industrial temperature grade (-40C to +85C per distributor listings) matches the deployment environment.
This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل DSPIC33CK128MC105T-I/PT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں DSPIC33CK128MC105T-I/PT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Core, Operating Temperature, PWM, Package, Packaging.
DSPIC33CK128MC105-I/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DSPIC33CK128MC105T-E/PT
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
DSPIC33CK64MC105T-I/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DSPIC33CK256MC105T-I/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
DSPIC33CK32MC105T-I/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DSPIC33CK128MC105T-I/PT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | dsPIC33CK 16-bit DSC core |
| زیادہ سے زیادہ کلاک فریکوئنسی | 100 MHz |
| Program Memory Size | 128 KB (128K x 8) Flash |
| Data RAM Size | 16 KB |
| Operating Voltage | 3 V to 3.6 V |
| ADC Resolution | 12 bit |
| ADC Channels | 20 channels |
| DAC Resolution | 12 bit |
| DAC Channels | 2 |
| On-chip Op-Amps | Yes |
| General-Purpose I/O | 39 I/O pins |
| Peripherals | PWM, 12-bit ADC, 12-bit DAC, OpAmps |
| پیکیج | 48-TQFP (7x7 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | -40C to +85C |
| Technology | CMOS |
| Packaging | Tape & Reel (T suffix) |
DSPIC33CK128MC105T-I/PT پن کنفیگریشن
| پن 1 | MCLR — Master clear reset (active low) / programming voltage |
| پن 2 | AN0/C1IN1-/RA0 — Analog input 0 / comparator input / port A |
| پن 3 | AN1/C1IN1+/RA1 — Analog input 1 / comparator input / port A |
| پن 4 | PGD/AN2/RP1/RA2 — Programming data / analog input 2 / remappable pin |
| پن 5 | PGC/AN3/RP2/RA3 — Programming clock / analog input 3 / remappable pin |
| پن 6 | AN4/RP3/RA4 — Analog input 4 / remappable pin |
| پن 7 | VDD — Positive supply (3.0-3.6 V) |
| پن 8 | VSS — Ground reference |
| پن 9 | OSC1/CLKI/RP4/RA5 — Oscillator input / external clock / remappable pin |
| پن 10 | OSC2/CLKO/RP5/RB0 — Oscillator output / remappable pin |
| پن 11 | RB1/RP6 — Port B / remappable pin |
| پن 12 | RB2/RP7 — Port B / remappable pin |
| پن 13 | RB3/RP8 — Port B / remappable pin |
| پن 14 | RB4/RP9 — Port B / remappable pin |
| پن 15 | VSS — Ground reference |
| پن 16 | VDD — Positive supply |
| پن 17 | RB5/RP10 — Port B / remappable pin |
| پن 18 | RB6/RP11 — Port B / remappable pin |
| پن 19 | RB7/RP12 — Port B / remappable pin |
| پن 20 | RB8/RP13 — Port B / remappable pin |
| پن 21 | RB9/RP14 — Port B / remappable pin |
| پن 22 | RB10/RP15 — Port B / remappable pin |
| پن 23 | RB11/RP16 — Port B / remappable pin |
| پن 24 | VSS — Ground reference |
| پن 25 | VDD — Positive supply |
| پن 26 | RB12/AN12/RP17 — Port B / analog input 12 / remappable pin |
| پن 27 | RB13/AN11/RP18 — Port B / analog input 11 / remappable pin |
| پن 28 | RB14/AN10/RP19 — Port B / analog input 10 / remappable pin |
| پن 29 | RB15/AN9/RP20 — Port B / analog input 9 / remappable pin |
| پن 30 | RC0/AN8/RP21 — Port C / analog input 8 / remappable pin |
| پن 31 | RC1/AN7/RP22 — Port C / analog input 7 / remappable pin |
| پن 32 | RC2/AN6/RP23 — Port C / analog input 6 / remappable pin |
| پن 33 | RC3/AN5/RP24 — Port C / analog input 5 / remappable pin |
| پن 34 | AVDD — Analog positive supply |
| پن 35 | AVSS — Analog ground |
| پن 36 | RC4/RP25 — Port C / remappable pin |
| پن 37 | RC5/RP26 — Port C / remappable pin |
| پن 38 | RC6/RP27 — Port C / remappable pin |
| پن 39 | RC7/RP28 — Port C / remappable pin |
| پن 40 | RC8/RP29 — Port C / remappable pin |
| پن 41 | RC9/RP30 — Port C / remappable pin |
| پن 42 | VSS — Ground reference |
| پن 43 | VDD — Positive supply |
| پن 44 | RB16/RP31 — Port B / remappable pin |
| پن 45 | RB17/RP32 — Port B / remappable pin |
| پن 46 | RB18/RP33 — Port B / remappable pin |
| پن 47 | RB19/RP34 — Port B / remappable pin |
| پن 48 | RB20/RP35 — Port B / remappable pin |
عام استعمالات
DSPIC33CK128MC105T-I/PT کے لیے موزوں ہے 6 ایپلیکیشنs: Brushless DC / PMSM Motor Control, Digital Power Supplies (LLC, Totem-Pole PFC), Solar Micro-Inverters, Battery Chargers and BMS Front-End Control, Industrial Embedded Control and Automation, Sensor Signal Acquisition and Conditioning.
Brushless DC / PMSM Motor Control
The DSPIC33CK128MC105T-I/PT is a natural fit for field-oriented control (FOC) of BLDC and PMSM motors. Its 100 MHz 16-bit DSP core executes single-cycle multiply-accumulate operations, sustaining current-loop bandwidths in the tens of kilohertz. The on-chip operational amplifiers amplify shunt-resistor phase-current signals before the 20-channel 12-bit ADC samples them synchronously with the PWM carrier, minimizing control-latency jitter. The high-resolution PWM module generates complementary gate-drive signals with dead-time insertion for three-phase inverters. Placed as the main controller between the gate drivers and the current-sense front end, the DSC closes the entire FOC loop on-chip; the trade-off is that a 3.3 V isolated supply and careful analog grounding are required to preserve 12-bit ADC accuracy in noisy inverter environments.
تجویز کردہ
Digital Power Supplies (LLC, Totem-Pole PFC)
Digital LLC converters and totem-pole PFC stages demand precise, high-resolution PWM and fast analog feedback, both of which the DSPIC33CK128MC105T-I/PT provides. The fine edge positioning of the high-resolution PWM enables exact phase-shift and frequency control of resonant converters, while the 12-bit ADC with multiple sample triggers monitors output voltage, input voltage, and current each switching cycle. The two 12-bit DACs can generate reference ramps or inject test signals for loop characterization. Running the compensator in firmware at 100 MHz allows adaptive mode switching (burst, CC, CV) without external analog compensation networks. Engineers should budget the 3.0-3.6 V rail cleanly and isolate the control ground from the power stage to exploit the controller's full PWM resolution.
تجویز کردہ
Solar Micro-Inverters
Micro-inverter designs combine MPPT algorithms, grid-synchronization, and safety compliance, all of which the DSPIC33CK128MC105T-I/PT can host. The 128 KB Flash holds MPPT search routines, PLL grid-lock code, and anti-islanding logic, while 16 KB RAM buffers waveform samples. The 12-bit ADC digitizes panel voltage/current and grid waveform feedback, and the DSP MAC instructions accelerate the sine-reference calculations needed for grid-current shaping. Operating at 100 MHz, the DSC updates the PWM duty commands every switching cycle for low output-current THD. The integrated op-amps can condition auxiliary sensing channels, reducing external BOM count on the compact inverter PCB. Designers must implement isolation and grid-certification firmware carefully, since the DSC is the safety-relevant control element in this application.
تجویز کردہ
Battery Chargers and BMS Front-End Control
Smart battery chargers benefit from the DSPIC33CK128MC105T-I/PT's combination of precision analog and control firmware capability. The 20-channel 12-bit ADC tracks cell voltages, charge current, and pack temperature across the 39 multiplexed I/O pins, while the PWM stage drives buck or buck-boost charging converters with synchronous rectification. Charge-termination algorithms (CC/CV taper, dT/dt cut-off, impedance tracking) execute in firmware with single-cycle DSP math, enabling accurate coulomb counting and thermal-derated charging profiles. The two 12-bit DACs provide smooth reference generation for calibration routines. The industrial -40C to +85C temperature rating covers automotive-adjacent charging environments, though an isolated communication interface (CAN or SMBus via external transceiver) must be added for pack telemetry.
تجویز کردہ
Industrial Embedded Control and Automation
In factory automation nodes, the DSPIC33CK128MC105T-I/PT serves as a deterministic real-time controller for actuators, pumps, and process sensors. The 39 GPIO pins interface limit switches, encoder inputs, and drive circuits, while the 100 MHz core guarantees interrupt latency suitable for position loops and safety interlocks. The 128 KB Flash accommodates state-machine logic, Modbus or similar fieldbus stacks, and OTA-style firmware update routines. The 12-bit ADC and op-amps digitize analog process variables (pressure, flow via external transducers) without a separate analog front end in cost-sensitive designs. The -40C to +85C industrial rating and surface-mount 48-TQFP package suit DIN-rail and cabinet-mounted control boards where vibration and thermal cycling are routine.
تجویز کردہ
Sensor Signal Acquisition and Conditioning
The DSPIC33CK128MC105T-I/PT functions as a compact analog acquisition hub: the on-chip op-amps buffer high-impedance sensor outputs, the 20-channel 12-bit ADC multiplexes across multiple sensor inputs, and the 12-bit DACs produce excitation or calibration signals. This single-chip chain suits bridge-sensor (strain gauge, RTD) conditioning in measurement nodes, where the 100 MHz DSP core applies digital filtering (IIR/FIR with single-cycle MAC) to improve effective resolution beyond the raw 12-bit converter limit. The 3.0-3.6 V operation aligns with common 3.3 V sensor rails, simplifying level compatibility. Designers should reserve calibration firmware space in the 128 KB Flash and perform end-to-end system calibration, since integrated op-amp offset and ADC integral nonlinearity determine the accuracy floor.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا DSPIC33CK128MC105T-I/PT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | DSPIC33CK128MC105-I/PT | DSPIC33CK128MC105T-E/PT | DSPIC33CK64MC105T-I/PT | DSPIC33CK256MC105T-I/PT | DSPIC33CK32MC105T-I/PT |
|---|---|---|---|---|---|---|
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Speed | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 64 KB | 256 KB | 32 KB |
| Operating Temperature | -40C to +85C (I grade) | -40C to +85C | -40C to +125C (E grade) | -40C to +85C | -40C to +85C | -40C to +85C |
| Operating Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Packaging | Tape & Reel | Tray/Tube | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel |
اہم امتیازی خصوصیات
- Largest Flash in the pin-compatible 105-pinout subgroup among 32/64 KB siblings (بمقابلہDSPIC33CK64MC105T-I/PT)
- Industrial temperature grade at standard cost (بمقابلہDSPIC33CK128MC105T-E/PT)
- On-chip analog integration reduces BOM (بمقابلہDSPIC33CK32MC105T-I/PT)
ڈیزائن نوٹس
Supply the DSPIC33CK128MC105T-I/PT from a clean 3.0-3.6 V rail (nominal 3.3 V). Decouple each VDD pin pair with 100 nF ceramic capacitors placed within 2 mm of the pins, plus at least one 4.7-10 uF bulk capacitor near the device. Keep the AVDD/AVSS analog supply isolated from the digital rail via an LC filter or ferrite bead to preserve 12-bit ADC performance. Estimated: a 3.3 V rail delivering 150 mA margin comfortably covers typical core plus I/O current for this family, but confirm exact figures in the manufacturer datasheet electrical characteristics table.
In motor-drive layouts, route the analog sensing traces (phase-current shunts to the op-amp/ADC pins) away from PWM gate-drive traces to prevent switching transients from corrupting ADC samples. Use the device's synchronized sampling triggers so conversions occur away from PWM edges. Keep the crystal/oscillator traces short and guard them with ground. The exposed perimeter of the 48-TQFP needs no thermal pad, but a solid ground plane under the 7x7 mm body improves EMI and signal return paths.
Do not confuse ordering-code suffixes: the T denotes tape-and-reel packaging only, while I and E denote industrial vs extended temperature grades - the T suffix part is not a different silicon. Also verify the MCLR programming path supports ICSP with the correct programmer voltage settings, and never drive 5 V logic directly into GPIO pins since the supply is limited to 3.6 V. Confirm the exact maximum clock and peripheral configurations in the current Microchip datasheet before final firmware freeze.
تعمیل کی معلومات
RoHS compliance and lead-free status per standard current-production Microchip product listings on DigiKey/Mouser. REACH, halogen-free and conflict-minerals declarations should be confirmed via Microchip's official product page certificates.