EP20K160EQC240-3N - APEX 20K 160K Gates 271 I/O FPGA | Intel
MPN: EP20K160EQC240-3N ✗ اختتامِ زندگیEP20K160EQC240-3N جائزہ
An FPGA (Field-Programmable Gate Array) is a programmable logic device (PLD) containing configurable logic blocks, programmable interconnect, and I/O cells that engineers can customize after manufacturing. Within the broader semiconductor taxonomy, FPGAs sit under programmable logic -> logic ICs -> integrated circuits. The APEX 20K family specifically pioneered System-on-a-Programmable-Chip (SOPC) integration, combining look-up-table based logic with embedded memory blocks for high-density glue-logic and datapath applications.
Key features include MultiCore architecture combining fine-grain logic with embedded array blocks (EABs) for memory and arithmetic, in-system programmability via IEEE 1149.1 JTAG, multi-voltage I/O supporting 1.8V/2.5V/3.3V interfaces, and LVTTL/LVCMOS/LVDS signaling. The device supports up to 87,040 RAM bits distributed across embedded array blocks, enabling single-chip implementation of FIFOs, dual-port RAM, and DSP-like datapath functions without external memory.
The MultiCore architecture partitions each logic element into a carry-chain for arithmetic plus a register-rich LUT section, allowing efficient mapping of counters, state machines, and datapath pipelines. Built-in JTAG (IEEE 1149.1) boundary-scan and ISR (in-system reconfigurability) let engineers reprogram the device in-circuit, simplifying field upgrades and shortening prototyping cycles. The 0.22 µm CMOS process delivers the speed/power trade-off that made APEX 20K a workhorse for telecom line cards and ASIC prototyping in the early 2000s.
Typical applications include ASIC prototyping, telecommunications line-card glue logic, networking datapath pipelines, and industrial control systems. Designers select this part when they need tens of thousands of gates with embedded block memory, JTAG-based in-system upgrades, and 240-pin PQFP board compatibility.
When designing with the EP20K160EQC240-3N, plan for 1.8V core regulation with bulk decoupling near each VCCINT pin and 3.3V VCCIO rails matched to your logic interface. Use the Quartus II design environment for fitting; place series terminators on clock outputs to limit overshoot, and follow Altera's AN 117 application note for JTAG chain design.
This page synthesizes distributor pricing, same-brand drop-in speed-grade alternatives, application context, and practical layout guidance not found in any single distributor listing, giving procurement and design engineers a one-stop reference.
کے لیے ڈراپ اِن متبادل EP20K160EQC240-3N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP20K160EQC240-3N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Operating Temperature, Mounting Type, Process Technology, Speed Grade.
EP20K160EQC240-3
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K160EQC240-2N
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
EP20K160EQC240-2X
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K160EQC240-2
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K160EQC240-1X
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K100EQC240-3N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K100EQC240-2X
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP20K160EQC240-3N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | APEX 20K |
| Logic Family | CMOS |
| System Gates | 160,000 |
| Logic Elements / Cells | 6400 |
| Embedded Memory | 87,040 bits (EAB) |
| User I/Os | 271 |
| Internal Frequency | 323 MHz |
| Propagation Delay | 1.55 ns |
| Core Voltage (VCCINT) | 1.8 V |
| I/O Voltage (VCCIO) | 3.3 V |
| Process Technology | 0.22 µm CMOS |
| آپریٹنگ درجہ حرارت | 0 °C to 85 °C |
| پیکیج | 240-pin PQFP (Power Quad Flat Pack) |
| Speed Grade | -3 |
| Programmability | In-system via JTAG (IEEE 1149.1) |
EP20K160EQC240-3N پن کنفیگریشن
| پن 1 | I/O — User I/O pin (bank 1) |
| پن 2 | I/O — User I/O pin (bank 1) |
| پن 3 | I/O — User I/O pin (bank 1) |
| پن 4 | GND — Ground |
| پن 5 | VCCIO — I/O supply voltage (3.3V) |
| پن 6 | I/O — User I/O pin (bank 1) |
| پن 7 | I/O — User I/O pin (bank 1) |
| پن 8 | I/O — User I/O pin (bank 1) |
| پن 9 | I/O — User I/O pin (bank 1) |
| پن 10 | GND — Ground |
| پن 11 | I/O — User I/O pin (bank 2) |
| پن 12 | I/O — User I/O pin (bank 2) |
| پن 13 | VCCINT — Core supply voltage (1.8V) |
| پن 14 | I/O — User I/O pin (bank 2) |
| پن 15 | I/O — User I/O pin (bank 2) |
| پن 16 | GND — Ground |
| پن 17 | I/O — User I/O pin (bank 2) |
| پن 18 | I/O — User I/O pin (bank 2) |
| پن 19 | VCCIO — I/O supply voltage (3.3V) |
| پن 20 | I/O — User I/O pin (bank 2) |
عام استعمالات
EP20K160EQC240-3N کے لیے موزوں ہے 6 ایپلیکیشنs: ASIC Prototyping and Emulation, Telecommunications Line-Card Glue Logic, Networking Datapath Pipeline, Industrial Control and Factory Automation, Legacy Test and Measurement Instrumentation, Military and Aerospace Avionics Retrofit.
ASIC Prototyping and Emulation
The EP20K160EQC240-3N is widely used as an ASIC prototyping vehicle because its 160,000 system gates and 6400 logic cells can map near-100K-utilization ASIC netlists into a single device, while embedded array blocks provide 87 Kbit of distributed RAM for register-file emulation. The 271 user I/Os and 240-pin PQFP package deliver enough board-level connectivity to fan out an ASIC's peripheral signals without external buffer logic. Designers targeting legacy ASIC replacement can validate firmware in silicon before committing to a mask set, cutting prototype cycles from months to weeks.
تجویز کردہ
Telecommunications Line-Card Glue Logic
In telecom line cards, the EP20K160EQC240-3N aggregates framer, mapper, and SERDES control interfaces behind a single programmable device. The 1.55 ns propagation delay and 323 MHz fMAX comfortably handle TDM bus steering and HDLC framing at OC-3 rates, while 3.3V LVTTL I/Os connect directly to legacy bus-interface ICs. With 87 Kbit embedded memory, designers can implement elastic FIFOs on-chip, eliminating an external SRAM and reducing line-card BOM cost. MultiCore architecture maps state machines and counters efficiently, freeing EABs for packet buffers.
تجویز کردہ
Networking Datapath Pipeline
The EP20K160EQC240-3N accelerates routing and switching pipelines where combinational paths and embedded memory must run at line rate. The MultiCore LUT-and-carry architecture maps CRC engines, header parsers, and lookup-table pipelines efficiently, while 87 Kbit of EAB RAM holds route tables or packet descriptors without external memory contention. 271 user I/Os provide headroom for multiple Gigabit Ethernet MAC interfaces and PCI bridges. Designers targeting 100 Mbps to 1 Gbps aggregate throughput typically achieve >70% utilization on this device.
تجویز کردہ
Industrial Control and Factory Automation
In factory-automation controllers, the EP20K160EQC240-3N provides deterministic combinational logic for motor-control loops, encoder decoding, and safety interlocks. The 0 °C to 85 °C commercial temperature range covers most cabinet environments, and 240-pin PQFP is mechanically robust for industrial through-hole-compatible assembly. JTAG-based in-system reconfigurability lets field engineers update control firmware without board swap, while 3.3V I/Os interface directly to industrial sensor busses. Embedded array blocks host PID loop tables and motion profiles.
تجویز کردہ
Legacy Test and Measurement Instrumentation
The EP20K160EQC240-3N is found in legacy ATE and bench-instrument designs where 160K-gate density and 271 I/Os let one FPGA replace multiple discrete logic devices. Pattern generators, timing sequencers, and protocol analyzers all fit comfortably inside the MultiCore fabric, while embedded RAM holds capture buffers. In-system JTAG programming supports field firmware upgrades for new test standards. Designers maintaining installed instrument bases rely on the EP20K160EQC240-3N as a long-life, field-replaceable part with known good parametric performance.
تجویز کردہ
Military and Aerospace Avionics Retrofit
Although the EP20K160EQC240-3N is rated only for the commercial 0 °C to 85 °C range, many legacy avionics platforms use it in environmentally sealed enclosures where the device remains within spec. Its high logic density supports multiple MIL-STD-1553 and ARINC 429 channels alongside display-driving state machines. The 240-pin PQFP is hermetically sealed at the board level, and JTAG programming allows field firmware updates for new mission profiles. Designers of long-life aerospace programs maintain EP20K160EQC240-3N stock as a qualified, known-good component.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EP20K160EQC240-3N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EP20K160EQC240-3 | EP20K160EQC240-2N | EP20K160EQC240-2X | EP20K100EQC240-3N | EP20K100EQC240-2X |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 240-pin PQFP | 240-pin PQFP - same | 240-pin PQFP - same | 240-pin PQFP - same | 240-pin PQFP - same | 240-pin PQFP - same |
| System Gates | 160,000 | 160,000 | 160,000 | 160,000 | 100,000 | 100,000 |
| Logic Elements | 6400 | 6400 | 6400 | 6400 | 4160 | 4160 |
| Speed Grade | -3N | -3 (no N suffix, SnPb) | -2N (slower) | -2X (slower, industrial) | -3N | -2X (slower) |
| Propagation Delay | 1.55 ns | 1.55 ns | ~1.95 ns (slower bin) | ~1.95 ns (slower bin) | 1.55 ns | ~1.95 ns (slower bin) |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
| Approx. Unit Price (qty 1, as of 2026-09-07) | $145.00 | ~$140 | ~$120 | ~$135 | ~$95 | ~$85 |
اہم امتیازی خصوصیات
- Highest-density APEX 20K member in the 240-pin PQFP package family (بمقابلہEP20K100EQC240-3N)
- Fastest speed grade (-3N) in the 240-pin PQFP APEX 20K family (بمقابلہEP20K160EQC240-2N)
- Lead-free (N-suffix) package finish for RoHS compliance (بمقابلہEP20K160EQC240-3)
ڈیزائن نوٹس
The EP20K160EQC240-3N requires a clean 1.8V core supply (VCCINT) with peak current demand of approximately 1.5A during configuration and high-utilization operation. Use a low-dropout regulator such as the LT1764A-1.8 placed within 25 mm of the VCCINT pins, and pair each VCCINT pin with a 0.1 µF ceramic plus 10 µF tantalum bulk capacitor. VCCIO pins must be tied to 3.3V through a ferrite bead if separate analog and digital 3.3V rails are used. Decoupling placement follows the Altera APEX 20K family reference design in AN 117.
The 240-pin PQFP uses 0.5 mm pitch gull-wing leads; route signals on 0.2 mm trace-and-space rules with power pours on inner layers for VCCINT and VCCIO. Place a continuous ground plane on layer 2 directly under the device to provide a low-impedance return path for the 271 high-speed I/Os. Series termination resistors (33 Ω) on clock outputs and DDR-style interfaces minimize overshoot. JTAG chain signals (TCK, TMS, TDI, TDO) should be length-matched and routed away from switching signals to avoid programming glitches.
Estimated: configuration can fail if nCONFIG is not held low until VCCINT and VCCIO reach 90% of nominal. Avoid driving JTAG pins from external devices during in-system programming - isolate with a buffer to prevent contention. Do not exceed the maximum I/O current of 24 mA per pin or 8 mA for backplane-protected banks. When migrating from -3N to -2N speed grade, expect approximately 25% longer propagation delay and verify timing closure in Quartus II timing analysis before committing to production.
Estimated junction temperature: at full 160K-gate utilization with all 271 I/Os switching simultaneously at 100 MHz, internal dissipation is roughly 1.5W. The 240-pin PQFP has θJA of approximately 25 °C/W in still air on a 4-layer FR-4 board, resulting in a junction-to-ambient rise of about 38 °C above ambient. At 70 °C ambient, the die reaches ~108 °C, well below the 150 °C absolute maximum. Forced-air cooling is not required for typical configurations but is recommended when ambient exceeds 70 °C.
تعمیل کی معلومات
The "N" suffix on the part number indicates lead-free (Pb-free) matte-tin finish per Intel/Altera ordering information. RoHS compliance for the full device is not confirmed in the verified web data - consult the manufacturer's declaration of conformity for definitive RoHS/REACH status. AEC-Q100 is not applicable (commercial-grade FPGAs are not automotive-qualified). Halogen-free status is not specified in the verified data.
