EP610LC-30 - 16-Macrocell Classic EPLD, 30ns, 5V | Altera / Intel
MPN: EP610LC-30 ✗ اختتامِ زندگیEP610LC-30 جائزہ
A Classic EPLD is a non-volatile programmable logic device sitting in the hierarchy of simple PLDs -> EPLD/CPLD -> programmable logic -> semiconductor. EP610 EPLDs integrate wide AND/OR arrays with a fixed macrocell architecture, providing deterministic 30 ns combinatorial delays across all 16 macrocells and offering a Turbo-only configuration mode for registered logic paths. This makes the family a direct drop-in successor to legacy 20-pin and 24-pin PAL/GAL devices in industrial and military designs.
Key features include 16 macrocells, 5 V single-supply operation (VCC = 4.75 V to 5.25 V), 100 MHz pipelined throughput, in-system UV-erasable EPROM cells for design iteration, 100 % generic testability, and full JTAG-free boundary-scan test capability through the Altera programming algorithm. The device also supports 1000 erase/program cycles typical, providing field-reprogrammability for prototyping and pre-production builds.
The EP610LC-30 architecture comprises a programmable AND array feeding a fixed OR array, followed by an output macrocell with a programmable flip-flop, output enable, and tri-state control. The Turbo mode bypasses the internal combinatorial delay path to deliver registered-clock rates well above the 33 MHz tpd-1 specification, while preserving the same I/O pinout across the family.
Typical applications include TTL/CMOS glue-logic replacement, address decoding for 8-bit and 16-bit microprocessor buses, state-machine controllers, industrial control logic, and legacy 5 V system designs where modern FPGAs would require level shifting and reprogramming. The military / industrial temperature grade extends the operating range to -55 C to +125 C.
When designing with the EP610LC-30, ensure that VCC decoupling (0.1 uF ceramic + 10 uF tantalum) is placed within 5 mm of the supply pin, and that programming voltage VPP (13 V nominal) is correctly sequenced for UV-erase windows on ceramic-windowed packages. Designers migrating from 25 ns EP610LC-25 should verify setup/hold margins since the slower part requires longer clock-to-output timing.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping sourcing engineers validate second-source decisions for legacy 5 V EPLD sockets.
کے لیے ڈراپ اِن متبادل EP610LC-30 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP610LC-30 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Family, Operating Temperature, Mounting Type, Technology.
EP610LC-25
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610LC-15
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610DC-30
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610DC-25
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610DC-35
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610JI-30
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610PC-30
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP610LC-30 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | Classic EPLD (EP610) |
| Macro Cells | 16 |
| Logic Gates | Equivalent to 300 gates (typical) |
| Pin-to-Pin Delay (tPD) | 30 ns |
| Pipelined Data Rate | up to 100 MHz |
| Supply Voltage (VCC) | 4.75 V to 5.25 V |
| Programming Voltage (VPP) | 13 V nominal |
| Technology | CMOS EPROM (UV-erasable) |
| پیکیج | 24-pin CERDIP / PDIP |
| آپریٹنگ درجہ حرارت | 0 C to +70 C (commercial) / -55 C to +125 C (military) |
| Erase/Program Cycles | 1000 typical |
| ماؤنٹنگ ٹائپ | Through-Hole |
| آؤٹ پٹ کی قسم | CMOS tri-state (programmable) |
| Logic Compatibility | TTL and CMOS |
| Turbo Mode | Yes (registered path bypass) |
EP610LC-30 پن کنفیگریشن
| پن 1 | I/O — Macrocell I/O pin (bidirectional, programmable) |
| پن 2 | I/O — Macrocell I/O pin |
| پن 3 | I/O — Macrocell I/O pin |
| پن 4 | I/O — Macrocell I/O pin |
| پن 5 | I/O — Macrocell I/O pin |
| پن 6 | I/O — Macrocell I/O pin |
| پن 7 | I/O — Macrocell I/O pin |
| پن 8 | I/O — Macrocell I/O pin |
| پن 9 | I/O — Macrocell I/O pin |
| پن 10 | I/O — Macrocell I/O pin |
| پن 11 | I/O — Macrocell I/O pin |
| پن 12 | GND — Ground |
| پن 13 | I/O — Macrocell I/O pin |
| پن 14 | I/O — Macrocell I/O pin |
| پن 15 | I/O — Macrocell I/O pin |
| پن 16 | I/O — Macrocell I/O pin |
| پن 17 | I/O — Macrocell I/O pin |
| پن 18 | I/O — Macrocell I/O pin |
| پن 19 | I/O — Macrocell I/O pin |
| پن 20 | I/O — Macrocell I/O pin |
| پن 21 | I/O — Macrocell I/O pin |
| پن 22 | I/O — Macrocell I/O pin |
| پن 23 | I/O — Macrocell I/O pin |
| پن 24 | VCC — +5 V supply voltage |
عام استعمالات
EP610LC-30 کے لیے موزوں ہے 6 ایپلیکیشنs: TTL/CMOS Glue Logic Replacement, Microprocessor Address Decoding, Industrial State-Machine Controllers, Legacy 5 V System Glue Logic, Military and Avionics Logic Replacement, Custom Peripheral Controllers.
TTL/CMOS Glue Logic Replacement
The EP610LC-30 replaces 4-6 standard 74LS/74HC TTL gates in a single 24-pin DIP, reducing board area by 60 % and BOM count. Its 30 ns tPD matches typical 74LS154 decoder delays, making it ideal for retrofitting legacy discrete-logic boards where redesign risk must be avoided. The 5 V single-supply operation matches existing TTL rails without level shifting, and the 16 macrocells provide enough logic capacity to consolidate address decoding, chip-select generation, and small state-machine functions. Compared to a discrete solution, the EP610LC-30 improves reliability through fewer interconnects and offers in-system UV-erasable reprogrammability for last-minute design fixes.
تجویز کردہ
Microprocessor Address Decoding
The EP610LC-30 generates chip-select and memory-map decode logic for 8-bit and 16-bit microprocessor buses such as 8086, Z80, and 68k. Its 30 ns tPD keeps the decoder outside the critical access-time path for memories at 8 MHz and below. With 16 macrocells the device can decode up to 16 address lines and produce 4-8 active-low chip-select outputs, replacing two or three 74LS138/139 decoders in one package. The CMOS EPROM technology ensures deterministic propagation delay across temperature, which is critical for industrial control boards operating from -40 C to +85 C. Field reprogrammability via UV erase allows last-minute memory-map adjustments without board respins.
تجویز کردہ
Industrial State-Machine Controllers
The EP610LC-30 implements Mealy and Moore state machines for industrial sequencers, conveyor controllers, and process-control timers. With 16 D flip-flops in the macrocells plus combinatorial AND/OR logic, it can encode FSMs up to 16 states with multiple inputs and outputs. The 30 ns tPD supports state-transition rates up to 33 MHz, suitable for high-speed automation loops. Industrial temperature variants (military -55 C to +125 C) qualify the EP610LC-30 for factory-floor and outdoor enclosures. Compared to a discrete 74LS-based state machine, the EPLD reduces PCB area, eliminates race conditions, and provides single-step design verification through Altera's MAX+PLUS II development tools.
تجویز کردہ
Legacy 5 V System Glue Logic
The EP610LC-30 is the natural fit for 5 V embedded systems where modern 3.3 V CPLDs would require level shifters. Its 4.75-5.25 V supply range directly interfaces TTL and 5 V CMOS peripherals without external buffers. In ISA bus cards, VMEbus controllers, and PC/104 stacks, the EP610LC-30 consolidates interrupt controllers, bus arbitrators, and address-decoding logic into a single 24-pin DIP. The 16 macrocells and 100 MHz pipelined rate deliver enough bandwidth for moderate-speed data routing while preserving backward compatibility with 1980s-era backplanes. This makes the device a long-tail favorite for industrial PC retrofits.
تجویز کردہ
Military and Avionics Logic Replacement
The EP610LC-30 in CERDIP package operates across the full military temperature range -55 C to +125 C and is suitable for avionics, naval, and ground-vehicle retrofits where parts must survive extreme thermal and vibration stress. Its ceramic hermetic package provides superior moisture resistance versus plastic DIP, and the CMOS EPROM technology offers 1000 erase/program cycles for development and qualification testing. MIL-STD-883 screening is available on related EP610DM/883B variants. While modern rad-hard FPGAs are preferred for new designs, the EP610LC-30 fills long-life-cycle programs where a 30-year maintenance commitment is required.
تجویز کردہ
Custom Peripheral Controllers
The EP610LC-30 builds custom peripheral controllers such as UART glue logic, parallel-port interfaces, and stepper-motor drivers that do not justify a microcontroller. With 16 macrocells the device handles register selection, handshaking, and timing generation in a single chip. The 30 ns tPD and 5 V TTL/CMOS compatibility simplify interfacing to legacy peripherals without external buffers. Compared to a PALCE16V8, the EP610LC-30 provides twice the macrocell count and 24 pins versus 20, enabling more complex peripherals while keeping the through-hole DIP footprint. Hobbyists and educators value the UV-erasable window for classroom learning.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EP610LC-30 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EP610LC-25 | EP610LC-15 | EP610DC-30 | EP610DC-25 | EP610DC-35 |
|---|---|---|---|---|---|---|
| Package | 24-pin CERDIP | 24-pin CERDIP - same | 24-pin CERDIP - same | 24-pin CERDIP - same | 24-pin CERDIP - same | 24-pin CERDIP - same |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Macro Cells | 16 | 16 | 16 | 16 | 16 | 16 |
| Pin-to-Pin Delay (tPD) | 30 ns | 25 ns | 15 ns | 30 ns | 25 ns | 35 ns |
| Supply Voltage | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Pipelined Data Rate | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Temperature Range | -55 C to +125 C (military) | -55 C to +125 C (military) | -55 C to +125 C (military) | 0 C to +70 C (commercial) | 0 C to +70 C (commercial) | 0 C to +70 C (commercial) |
| Package Body | CERDIP (ceramic) | CERDIP (ceramic) | CERDIP (ceramic) | CERDIP (ceramic) | CERDIP (ceramic) | CERDIP (ceramic) |
اہم امتیازی خصوصیات
- Military temperature grade in CERDIP package (بمقابلہEP610DC-30)
- Higher speed than DC-35 variant (بمقابلہEP610DC-35)
- Lower cost than LC-15 and LC-25 variants (بمقابلہEP610LC-15)
ڈیزائن نوٹس
Place a 0.1 uF ceramic decoupling capacitor within 5 mm of the VCC pin (pin 24) and a 10 uF tantalum bulk capacitor on the same supply rail. The EP610LC-30 draws transient current peaks of up to 50 mA during simultaneous macrocell switching; without local decoupling these transients couple into the AND/OR array and may induce ground bounce on outputs. Keep VCC trace width >= 0.5 mm to limit voltage drop.
The programming voltage VPP is 13 V nominal and must NOT be applied to VCC during normal operation - doing so will permanently damage the EPROM cells. Use an Altera-approved programmer (such as the Altera Logic Programmer or BP-1200) with the EP610 device driver loaded. After UV erasure, leave the device under a UV lamp for 30-45 minutes (wavelength 2537 Angstrom, intensity 12,000 uW/cm^2) to fully clear all bits.
Keep TTL-level inputs below 5.5 V even though the absolute-maximum rating is 7 V, because the CMOS EPROM input structures degrade with over-voltage. Use series resistors (100 ohm) on inputs driven by long PCB traces to limit ringing. Leave at least 2 mm of copper clearance around the device for thermal relief, since the CERDIP package dissipates up to 0.5 W at maximum toggle frequency.
تعمیل کی معلومات
CERDIP package historically contains lead (Pb) in the glass seal - not RoHS compliant. Compliance status not stated in the verified distributor data; consult Intel/Altera legacy datasheet for definitive declaration. AEC-Q100 not applicable for this military/industrial product.
