Altera

EPF10K30ATI144-2 - 30K-Gate FLEX 10KA FPGA, 144-TQFP | Altera

MPN: EPF10K30ATI144-2 ✗ اختتامِ زندگی

5.0 V Vdss 144-pin TQFP (TQFP-144), 0.500 mm pitch Package -2 Speed

قیمت کی درخواست کریں

MOQ: 1 |

ڈیٹا شیٹ دیکھیں (PDF) متبادل دیکھیں

مقدار

EPF10K30ATI144-2 جائزہ

The Altera (Intel Programmable Solutions Group) EPF10K30ATI144-2 is a member of the FLEX 10KA family of CMOS SRAM-based Field-Programmable Gate Arrays (FPGAs) integrating approximately 30,000 typical gates, 1,728 logic elements, and 12,288 RAM bits in a 144-pin Plastic Quad Flat Pack (TQFP) package. The -2 speed grade and 'I' (industrial) temperature suffix make this device a moderate-performance, extended-temperature variant aimed at glue-logic, bus-interface, and state-machine consolidation designs.

An FPGA is a semiconductor device built around a matrix of configurable logic blocks (CLBs) connected through programmable interconnect and surrounded by programmable I/O cells. Unlike ASICs, FPGAs are manufactured in volume and customized at the customer's bench via a configuration bitstream loaded into on-chip SRAM at power-up. The FLEX 10KA family extends the original FLEX 10K architecture by adding embedded array blocks (EABs) that implement dedicated on-chip memory, doubling usable on-chip RAM to 12,288 bits and enabling true single-chip implementations of small FIFOs, register files, and lookup tables alongside general logic.

Key features of the EPF10K30ATI144-2 include 246 user I/O pins distributed across six I/O banks, an embedded array of 12 EABs delivering up to 12,288 bits of fast synchronous RAM, JTAG-based IEEE 1149.1 boundary-scan test support, multi-volt I/O compatibility with 5.0 V, 3.3 V, and 2.5 V interfaces, and in-system programmability through the Altera MAX+PLUS II or Quartus development flow. The 144-pin TQFP footprint offers a compact, low-cost PCB integration path.

Typical applications span industrial control, glue logic for microprocessor and DSP subsystems, peripheral and bus interfacing, low-volume prototyping bridges to ASIC migration, and telecommunication line-card glue logic. Compared with later Cyclone families, the FLEX 10KA uses older 0.42 µm CMOS, four-metal-layer process technology and consumes higher static current; it remains attractive only for legacy board respins, long-life industrial platforms, and cost-sensitive retrofits.

When designing with this device, provide a clean 5.0 V core supply, decoupling with at least one 0.1 µF ceramic capacitor per supply supply pin, and a configuration PROM or microcontroller to load the bitstream at power-up. Verify all JTAG signals are pulled to defined states during board bring-up to prevent accidental reprogramming in noisy environments.

This page synthesizes verified distributor availability, same-family drop-in alternatives, lifecycle context, and practical design guidance not found on a single distributor listing, helping engineers rapidly assess whether the EPF10K30ATI144-2 is still viable for their long-life program.

کے لیے ڈراپ اِن متبادل EPF10K30ATI144-2 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPF10K30ATI144-2 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Operating Temperature, Family, Speed Grade, Configuration Method.

EPF10K30ATC144-1N

Intel

Package: 144-LQFP (TQFP-144)

Operating Temperature: 0 C to 70 C (Commercial)

Family: FLEX 10KA